Adapter sleeves are the most commonly used components for locating bearings with a tapered bore onto a cylindrical seat as they can be used on smooth or stepped shafts. They are easy to mount and require no additional location on the shaft. When adapter sleeves used on smooth shafts, the bearing can be located at any position on the shaft.

Withdrawal sleeves product codes start with AH or AHX. The X refers to a DIN revision index, which has now become standard. The product codes for withdrawal sleeves with oil grooves and oil ducts use the letters AOH or AOHX. Withdrawal sleeves whose product codes contain AOH or AOHX always have oil ducts in the bore and on the taper.

Lock nuts are used to install, remove and secure bearings and other machine parts. Depending on how they are used, locknuts are referred to as mounting nuts, shaft nuts or removal nuts. So-called hook spanners or impact spanners are generally used for securing or releasing purposes. Bearings are pressed onto the taper of a shaft or adapter sleeve using locknuts.

Lock washers from the mb and mbl ranges are used to secure type km, kml, and hm. T lock nuts. Locking clips from the ms 30. And ms 31. Ranges are used to secure type hm 30. And hm 31. Lock nuts.

A. Nairsons Industries is one of the premier organizations involved in manufacturing and supplying of a wide range of bearings adapter sleeves in India.

• TypeAdapter sleeve
• Model NumberH / HE
• Brand NameKT Kingtiger
• MaterialSteel
• Place of OriginLudhiana

Adapter sleeves are axially slotted sleeve with cylindrical bore, tapered outside surface and male screw thread at small end used with locknut and lock washer for mounting of bearings with tapered bore on cylindrical outside surface of shaft. It is also call pull-type sleeve. Adapter sleeves are the most commonly used components for locating bearings with a tapered bore onto a cylindrical seat as they can be used on smooth or stepped shafts.

Adapter sleeves are the most commonly used components for locating bearings with a tapered bore onto a cylindrical seat as they can be used on smooth or stepped shafts. They are easy to mount and require no additional location on the shaft. When adapter sleeves used on smooth shafts, the bearing can be located at any position on the shaft.

Withdrawal sleeves product codes start with AH or AHX. The X refers to a DIN revision index, which has now become standard. The product codes for withdrawal sleeves with oil grooves and oil ducts use the letters AOH or AOHX. Withdrawal sleeves whose product codes contain AOH or AOHX always have oil ducts in the bore and on the taper.

Lock nuts are used to install, remove and secure bearings and other machine parts. Depending on how they are used, locknuts are referred to as mounting nuts, shaft nuts or removal nuts. So-called hook spanners or impact spanners are generally used for securing or releasing purposes. Bearings are pressed onto the taper of a shaft or adapter sleeve using locknuts.

Lock washers from the mb and mbl ranges are used to secure type km, kml, and hm. T lock nuts. Locking clips from the ms 30. And ms 31. Ranges are used to secure type hm 30. And hm 31. Lock nuts.

A. Nairsons Industries is one of the premier organizations involved in manufacturing and supplying of a wide range of bearings adapter sleeves in India.

• TypeAdapter sleeve
• Model NumberH / HE
• Brand NameKT Kingtiger
• MaterialSteel
• Place of OriginLudhiana

Adapter sleeves are axially slotted sleeve with cylindrical bore, tapered outside surface and male screw thread at small end used with locknut and lock washer for mounting of bearings with tapered bore on cylindrical outside surface of shaft. It is also call pull-type sleeve. Adapter sleeves are the most commonly used components for locating bearings with a tapered bore onto a cylindrical seat as they can be used on smooth or stepped shafts.