Single Reduction Worm Gearboxes - Horizontal TypeSizes AGNEE H 100 to AGNEE H 425

The company is chiefly engaged in the manufacturing and supplying of Spiral Bevel Gear Set all across the country. The Spiral Bevel Gear Set, which we offer, is known for its excellent performance and durability. Our Spiral Bevel Gear Set can be availed at the most competitive prices. Specifications

• Spiral Bevel Gear Set teeth cut on gleason no 16 spiral bevel gear generators
• Generally in case hardening steel hardened tempered and lapped. But also in other alloy steel, case hardened steels, mild steel, stainless steel, induction hardened, cast iron, or as specified for automobiles and industries
• Custom made as per specifications of the clients
• Teeth Size from 1 Module/10 D.P. to 10 Module/2.5 D.P
• Outer diameter from 24 mm/1" to 300 mm/12"
• Face widths up to 250 mm/10"
• Required information for quotation
• Material of construction - Steel, hardening and tempering required
• Teeth specification - pitch, angle
• Outer diameter
• Face angle
• Bore size
• Key way size
• Hub size

ConstructionWhere two axles cross at point and engage by means of a pair of conical gears, the gears themselves are referred to as bevel gears. These gears enable a change in the axes of rotation of the respective shafts, commonly 90o. A set of four bevel gears in a square make a differential gear, which can transmit power to two axles spinning at different speeds, such as those on a cornering automobile. There Are Four Basic Types Of Bevel Gear Sets

• Straight Bevel Gears: These gears have a conical pitch surface and straight teeth tapering towards an apex
• Zero Bevel Gears: This is similar to a bevel gear except the teeth are curved. In essence, Zero Bevel Gears are Spiral Bevel Gears with a spiral angle of zero
• Spiral Bevel Gears: The teeth are curved teeth at an angle allowing too contact to be gradual and smooth
• Hypoid Bevel Gears: These gears are similar to spiral bevel except that the pitch surfaces are hyperboloids rather than cones. Pinion can be offset above or below gear center, thus allowing larger pinion diameter, and longer life and smoother mesh, with additional ratios e.g., 6:1, 8:1, 10:1
• The design of bevel gears results in thrust forces away from the apex. With the bearing limitations the gears have to be carefully designed to ensure that they are not thrown out of alignment as they are loaded.

.

AGNEE Double Reduction Worm Speed Reducers are two stage worm reduction units.A specially designed primary worm reduction unit is integrally mounted on a standardsingle reduction AGNEE worm reducer which forms the second stage. The compositeunits provide the most compact and rigid arrangement for large reduction of speednecessary for slow moving machinery. A wide range of ratios up to 4900:1 is available. The worm shafts are made of high quality case hardening steel, accurately generated, ground and super finished. The worm wheels comprise of phosphor bronze centrifugally cast rims of substantial sections welded to rigid centers. Considerable flexibility of shaft layout is permissible with all types of Double Reduction units. The dimension drawing for each series shows the different shaft handing arrangements and the appropriate reference should always be quoted when ordering.

We offer Helical Gearbox.

Agnee has developed Planetary Gearbox for various Industrial applications operated by Electric motor and Hydraulic motor. Agnee providing customers with High Quality, Cost Effective, Power saving, Planetary gear box with wide range of power transmissions. Planetary Gearbox Mounting Type Foot- Model B201 To B904 & B1002 To B1504 Planetary Gearbox Mounting Type Flange- Model B201 To B904 & B1002 To B1504 Bevel Planetary Gear Box Mounting Type-Foot Model B 201b To B 904b Bevel Planetary Gear Box Mounting Type-Flange Model B 201b To B 904b PLANETARY GEAR BOX FOR AGITATOR APPLICATION So feel free to become a privileged buyer and purchase for the most competitive prices offered by us. Principle:Planetary Reduction Gearbox consist of an Internal toothed Ring Gear to which are set 3 Planets mounted on the Planet Carrier engaging also with the Sun Gear (Pinion) and reduced output speed is taken through Planet Carrier and Ring Gear is remain stationary. Output shaft maintaining the same direction of rotation as Input. Salient Features Planetary Gearbox:High Reduction Ratios, Power Saving, High Efficiency Long Life, Space-Saving Compactness, Higher Overload Capacity, Reliable and Trouble-Free Service, Compact and Co-Axial Sturdy, No-Self Locking Property. Technical Specifications:Reduction Ratio: 3.6 to 7000:1Output Torque: 10 Nm to 1, 450, 000 NmInput Power: 0.25 HP to 300 HP (0.18 Kw to 224 Kw)Mounting Type: Flange/ FootPrime Mover: Electric Motor, Hydraulic MotorInput Speed: 1440 rpmInput Type: Male Shaft, Hollow InputOutput Type: Male Shaft, Hollow Input, Spline Shaft

We offer Helical Gearbox.

We offer Helical Gearbox.

we are offering Helical Gearbox.

H Series Bevel Helical Gearboxes and Helical Gearboxes:AGNEE H series helical parallel shaft and bevel helical right angle drive industrial gearboxes have been introduced to meet the requirements of today's demanding applications in the medium and heavy-duty sector of the power transmission market. The modular design and construction of the Series H offers many engineering and performance benefits including a high degree of interchangeability of parts and sub assemblies. This in turn provides considerable economies of production while maintaining the highest standard of component integrity. Apart from standard range, Gear Boxes are also tailor made to suit individual requirement or as per specifications provided. Please feel free to discuss your requirement and we shall be pleased to make suitable suggestions. Product Specification:Gear tooth geometry design combines maximum efficiency with high load carrying capacity and minimal noise generation. Serviceability of the product was key in the design of the Series H range allowing easy maintenance for long life and reliability, which are synonymous with our field reputation. Unit Sizes: 80, 90, 100, 112, 125, 140, 160, 180, 200, 225, 250, 280, 315, 355, 400, 450, 500, 560, 630 Transmission ratio: 1.2 - 637 Input Power: 0.61 KW to 5, 000 kW Torque: Up to 117, 000 Nm The Bevel Helical Gearbox Housing is usually made of Close Grain Cast Iron. Sometimes Housing is also offered in Structural Steel when the application demands. They are rugged, corrosion resistant and absorb shock and vibration. The Helical Pinion is made of EN 353 Case Hardening Steel, Helical Gears are made of SAE 8620 Case Hardening Steel. The teeth are generated on Gear Hobbing Machine. They are then Case carburized, Hardened and Tempered. Finally, they are surface ground to close tolerances. The teeth Flanks are ground on Teeth Profile Grinder. This leads to very good efficiency and a quiet working condition. The Output shafts are from alloy steel forging or bars. Low speed shafts can be solid or hollow type. Bearings are fitted on a accurately bored journal and taper roller Bearings are used. Features & Benefits of Bevel Helical Gearboxes :AGNEE Series H Bevel Helical Gearbox takes advantage of our many years of accumulated design expertise together with the use of high quality materials and components, and has the following features & benefits: Profile ground helical gears. High level of surface finish for quiet running. All Gears and Pinions case carburised, Hardened and TemperedTeeth Profile GroundUnits can be offered in horizontal or vertical mounting positions All units are also available with hollow bore for output shaft mounting. Output bores can be connected by shrink disc.

The AGNEE Worm Gearboxes have Cast Iron Gear Case of streamlined design completely air tight, dust proof and capable of being installed in open without any cover. The Worm Shaft is made of Alloy Steel, duly hardened and tempered. The Worm Wheel is made of Chill Cast Phosphorous Bronze and teeth accurately Generated on Gear Hobbing Machines. They are supported on Extra Heavy Duty Taper Roller anti friction Bearings of ample margin of safety to allow adequate journals as well as thrust loads. Lubrication is effected by splash of oil from the sump. Thus, no special care is required except for occasional oil topping to the required level. Air cooling is effected by means of standard polypropylene or metal fans. Please read the Selection of Correct Worm gearbox for choosing the correct one for your application. They are available in: Vast range of Models suit every individual's requirement Some Models like C.D. 50, 60, 75, 85, 100 mm, Ratio 30:1 or 40:1 are usually available Ex-stock or on short notice Center Distances from 40 mm to 400 mm In Single or Double Stage Reductions Ratios from 5:1 to 4900:1 Also made as per customer's specifications, Drawing, requirements Overhauling of Old Gear Boxes also undertaken, Early delivery schedules Adaptable Worm Gear Boxes, range from CD 25mm to 85mm Right angle worm gearboxes contain input shafts that are positioned perpendicular to the output shafts. Right angle worm gearbox have up to 98% efficiency levels, and are common in printing presses and glass cutting equipment.