Our Products
Air Curtains are used for cleanliness purposes. The aim of dust prevention is something, which is effectively attained with the usage of Air curtains. Water Proof Commercial Ply in Teak Wood Structure is used which adds to the quality of products. Our array of Air Curtains is high on demand in the market and effectively prevents dust from coming in the electronic equipment. Apart from this, the Air Curtains offered by us are competitively priced.
ControlsAvail from us an impeccable array of Softwall Modular Cleanroom also called clean air tent that are primarily used for the purpose of relatively a smaller clean room and can be availed in a ready to assemble configurations. The range of units offered by us can be moved from place to place. Besides, the Softwall Modular Cleanrooms that we offer find extensive applications in the areas and are quite reasonably priced.
Appreciated for
Applications
With the same basic principle like that of Laminar Air Flow units, Positive Pressure Modules serves the purpose of providing a clean area within a small enclosure or cell. The designs and interiors are manufactured using high grade raw materials. Besides, the Basic cabinet is fabricated from pre treated industrial block board with exteriors covered by decorative laminated sheets & interiors coated with synthetic rubber paint. In all, the total model may be of CRCA sheet metal with appropriate MS structures finished by epoxy paint or powder as per requirement.
CharacteristicsSpecifications
HEPA Filter size | Media Ultra clean glass fiber paper - imported |
---|---|
Casing | As per Specific Requirement |
Particle retention | 0.3 micron |
Cleanliness | CLASS 100 |
Overall | CLASS 10000 |
Power supply | 220 V. Single phase |
Keeping in focus the users requirements and needs, Bio-safety cabinets are available in various standard sizes. Bio-safety cabinets are available with various features. It helps allowing room air to enter the cabinet, sweep the inner surfaces, and exhaust-out the air through the duct. Our range of Bio Safety Cabinets is in compliance with international standards and is reasonably priced.
FeaturesAvailable with us is an immaculate gamut of Exhaust Fume Hood that is designed for suiting the requirements of varied industrial applications. Our range of Exhaust Fume Hood prevents the exposure of the hood user and lab occupants to hazardous or odorous chemicals. It also prevents the release of hazardous chemicals into the laboratory. Besides, we also design and manufacture Scrubbers, Fume Extraction & Dust Collection Systems. Customers can also be eased by the availability of Exhaust Fume Hood at the most cost-effective prices.
Popular forWe are recognized as a leading manufacturer and supplier of a wide gamut of Garment Storage Cabinets that is sturdily constructed. The array of Garment Storage Cabinets offered by us is especially designed to prevent the deposition of dust on the clean room garments. Manufactured using high grade raw materials, the Garment Storage Cabinets that we offer are high on demand in the market and are quite nominally priced.
Material of ConstructionHorizontal and vertical Laminar Air Flow Units are serves number of purposes and are suitable for various industries. Best quality adhesives are used for ensuring airtight joints. The inner and outer surface is made up of decorated laminated sheets and is coated with synthetic rubber paints. Besides, the Laminar Air Flow Units offered by us can be availed at the most cost-effective prices.
ApplicationsSpecifications
Cleanliness | Class 100 |
---|---|
Particle Retention | 0.3 Micron & Above |
Noise Level | 65 decibelĀ±5 |
Velocity | 90 Feet/MinuteĀ±20 |
Worktable | By melamine laminated ply or Stainless steel |
Front door | 6mm clear acrylic or 3mm Poly carbonate |
Illumination | Fluorescent tubes with diffusers. |
Other accessories | Manometer, Additional power point, gas inlet & Castors |
Power Supply | 230V single phase, 50 Hz |
HEPA Filter | Media Ultra clean glass fiber paper - imported |
Casing | Epoxy coated CRCA frame |
Separators | Fine corrugated aluminum foils |
Retention | 0.3 Micron |
Efficiency | 99.97% |
PRE Filter | Media Synthetic, non-woven polyester fibers |
Casing | Enamel painted CRCA frame Retention 10 - 15 Micron |
Efficiency | 90 % |
We are counted amidst the reliable manufacturers and suppliers of a huge assortment of Dispensing & Sampling Booth. These booths are used to control the hazardous emissions of powder dust during sampling process, which further protects the environment. Our array of Dispensing and Sampling Booths is in compliance with the international standards and finds applications in various industrial areas. Besides, clients can be eased by the availability of these booths at the leading industrial prices.
Specifications
Type | Front Open |
---|---|
Direction of flow | Vertical |
Material of Construction | S.S 304 / S.S 316 or CRCA Powder Coated |
Cleanliness | Class 100 as per US FED STD 209E |
Particle Retention | 0.3 micron & above |
Noise Level | 65 dB on On Scale 'A'±5 |
Velocity | 90 FPM±20 % |
Illumination | Fluorescent tubes diffusers |
Pressure Differential | 0-25 mm inclined Manometers / Magnehelic Gauge |
Power Supply | 230 V single Phase , 50 Hz |
Pre-Filters | 10 - 15 micron rating, 3- Layers of HDPE mesh, 6mm Pressure Drop |
Intermediate Filters | 3 micron & above, two layers of HDPE woven mesh and one layer of Non-woven polyester Bondex Media, 9 mm Pressure Drop, Efficiency 97% |
Supply HEPA Filters | 99.97% efficiency @ 0.3 micron rating |
Exhaust HEPA Filters | 99.97% efficiency @ 0.3 micron rating |
Blower Assembly | Statically & Dynamically balanced DIDW type blower system |