Body - Mild Steel Body Oil Tank Capacity - 60 Liters Production Capacity - 1000 to 1200 Nos Motor - 5 H.P.

Concrete Block Machine It is a Stand type Hand operated Concrete Block /Fly Ash Bricks Making Machine Versatile to shift to any working site to cast Blocks /Bricks on wooden or steel ballet.Which is inserted from the front side. It has a top pressing ram operated by the toggle mechanism.Bottom plate is vibrated with efficient light weightecentric vibrator.With the mechanical advantage developed by the toggle with small manual force the knock of the vibrations are bolstered effectively to the blocks. By Pressing the operating Lever, the moulds leaves the blocks on the pallet. The blocks with the pallet is removed and kept for wet drying manually.   Power : 2 H.P., 3 Phase motor, 1440 R.P.M. or 5 H.P. air cooled Diesel Engine 1500 R.P.M. Vibration : 6000 Hz Capacity : 600 - 1200 Blocks / Shift ( 1 or 2 Blocks / Stripping )

tilting drum type, one bag capacity cast iron / mild steel body with suitable frame, taper roller bearings and metal bushing pinion shaft. foundation type (suitable for concrete block unit) .

• Country of OriginIndia
• MaterialSteel
• ShapeSquare
• Load Capacity :350kg.
• Size :1500 x 900mm

Suitable to move cement oncrete, sand, greet, lime in construction work. It is made by M.S. Sheet, Pipe. It has caster/Pnumatic wheels for movement.

Technical Specification : Capacity : 150 Kg. Per Batch Drive : 2 HP - 1440 RPM

Suitable to move cement oncrete, sand, greet, lime in construction work. It is made by M.S. Sheet, Pipe. It has caster/Pnumatic wheels for movement.

It is available from 4 Inch Diameter to 60 Inch Diameter, In Singal arm / Double Arm. Its Face Is available in 3, 4, 5, 6, 8, 10, 12 inch width.It is made from C.I. And M.S.

• Country of OriginIndia
• MaterialSteel
• ShapeSquare
• Load Capacity :350kg.
• Size :1500 x 900mm

Technical Specification : Capacity : 150 Kg. Per Batch Drive : 2 HP - 1440 RPM

The Reinforced cage is first prepared on the collapsible reinforcing machine by hand process. The cage is then placed inside the pipe mould, which is then hoisted up and mounted horizontally on the Runner machine. It is rotated by 'speed veriater Machine. The rotation is kept slow in the beginning and then the speed is increased. The concrete mixture is prepared material by mixing cement stone, metal and send respectively. The cement concrete is fed into the moulds during rotation, which spreads inside evenly. The time required for completion of this operation depends upon the diameter and class of the pipe. The pipes are kept mould for 24 hours. On the following day the pipes are removed from the moulds and submersed in water in the curing tank for about 15-20 days depending upon the class of the pipe the specimen of the pipes are subject to the following tests viz : 1- Hydrostatic pressure test , 2- Three edge bearing test, 3 - Absorption test.

To mix raw material in Fly Ash Bricks Plant, Lime Industries. Capacity:-100 to 300Kg. Material Charge:-Manual Material Discharge:-Bottom Door Opening (Manual) Mixing :- By Heavy Rollers & Hard Faced Scrappers.