• Brand NameAPS

We offer Horizontal Deep Freezer . • Also used for preservation of red blood plasma, white blood cell, skin, bone, bacteria, semen, biomedical product in small medium and large blood centres. • Suitable for hospitals, drugstore, pharmaceuticals factories, sanitation and anti-epidemic stations and clinics. SALIENT FEATURES & CONSTRUCTION • Robust construction Outer chamber is made of Mild Steel duly pre treated & finished with powder coated paint for lasting finish. • Inner chamber made of STAINLESS STEEL SHEET (304 Grade). • Outer front double walled door is insulated and is fitted with magnetic tape for air tight closing for no temperature loss, provided with lock and key arrangement. • Door operated illumination lamp is fitted inside the chamber for easy visibility. • A full view inner plexi-glass door enables inspection and monitoring of inner chamber specimens without disturbing the process temperature. • High grade PUF INSULATION between outer and inner chamber for minimal thermal losses. • Direct cooling system for stable temperature control by ISI marked CompressorCondensing Units CFC free & R-134 a eco friendly refrigerant. • Control panel having all controls and circuitry are housed at the top fitted with Temperature controller cum Indicator Microprocessor based with LED display for Set Value (SV) & Process Value (PV) to select any desired temperature provided with Volt meter on the panel to read the incoming voltage. • Caster wheel mounted for easy portability. • Supplied with cord and plug. • Operating Voltage: 220 Volts AC (50 Hz).

• Brand NameAPS

We offer Vertical Autoclave. • Used for sterilization under saturated steam pressure at any selected point between 15 to 22 p.s.i. (adjustable). • These double walled units have inner chamber (Boiler) made of 18 S.W.G. stainless steel (SS-304 grade). • Outer wall is covered with stainless steel sheet. • Thick stainless steel lid is tightened by radial locking system and can be lifted through a pedal lifting device for user comfort • Fitted with joint less neoprene rubber gasket. • Systems are hydraulically tested up to 40 p.s.i., as a Safety Measure. • All autoclaves are fitted with standard accessories such as water indicator, pressure gauge, steam release cock, spring loaded safety valve, pedal lifting device and heating element. • Space between boiler and outer shell works as air insulation. • Supplied complete with S.S. basket, cord and plug. • Supplied with cord and plug to work on 220230 volts A.C. Supply.

• Brand NameAPS

We offer Medical Waste Sterilizer. 1. for gravity flow autoclave • The temperature of not less than 121°C and pressure of not less than 1.02 K.G.CM2 and autoclave residence time not less than 60 minutes. • The temperature of not less 135°C and pressure of not less than 2.1 K.G.CM2 and autoclave residence time not less than 45 minute. • The temperature of not less than 149°C and pressure of not less than 3.5 K.G.CM2 and autoclave residence time not less than 30 minute. 2. for vacuum autoclaving with pre vac & purge system. • The temperature of not less than 121°C and pressure of not less than 1.02 K.G.CM2 and autoclave residence time not less than 45 minutes with one or more pre vacuum pulse. • The temperature of not less than 135°C and pressure of not less than 2.1 K.G.CM2 and autoclave residence time not less than 30 minutes with one or more pre vacuum pulse. Construction:– Shape: – Either cylindricalrectangular. Chamber is made of boiler grade sheetAISI 304AISI 316 thick sheet having one or two nos. pivoted door mounted on a sturdy structural stand dully insulated & covered either by S.S. or M.S. Sheet. Pit mounted design is also available as per the customer requirement for easy loading & unloading. The door will be provided with automatic safety door looking unlocking mechanism. Valves are provided for operation safety steam inlet, drainage etc. Control and Monitoring System:– Microprocessor based computer system and printer is provided for controlling and monitoring the sterilizing cycle with the following feature • Fully programmable microprocessor based unit with no volatile memory and with different program combinations. • Automatic operation of the sterilizer. • Self diagnostic system gives fault massage to the operator.

• Brand NameAPS

We offer Blood Bank. � Robust construction Outer chamber is made of Mild Steel duly pre treated & finished with powder coated paint for lasting finish. � Fitted with Durable coaxial blower for forced air circulation at triple walled back to maintain temperature uniformity in the chamber. � Outer front double walled door is insulated and is fitted with magnetic tape for air tight closing for no temperature loss, provided with lock and key arrangement. � Door operated illumination lamp is fitted inside the chamber for easy visibility. � A full view inner plexi-glass door enables inspection and monitoring of inner chamber specimens without disturbing the process temperature. � High grade PUF INSULATION between outer and inner chamber for minimal thermal losses. � Cooling is done by finned tube evaporator lie in the air circulation path by ISI marked CompressorCondensing Units CFC free & R-134 a eco friendly refrigerant. � Temperature is controlled by Electronic Digital Temperature Indicator Cum Controller fitted With Audio Visual Alarm incorporated with battery back which triggers in the event of fluctuation exceeding permitted tolerance. Unit is also fitted with Door Operated Alarm and Power Supply Failure Alarm, as a safety device. to prevent the spoilage of stored blood bags. � Drawers are provided for accommodating blood bottles or Blood bags. � Caster wheel mounted for easy portability. � Supplied with cord and plug. � Operating Voltage: 220 Volts AC (50 Hz).

• Brand NameAPS

We offer Fermenter Vessel. APPLICATIONS • Fermenter Vessel made of stainless steel is ideal for doing fermentation in large volume. • Fermenter Vessel is low cost options for general Fermentation- ideal for R&D labs etc, Agriculture, Pharmaceutical, and Food & Beverage Industries. SALIENT FEATURES & CONSTRUCTION • Complete Assembly constructed from S. S. 304 Grade. • Heated through steam heating system by immersion type (ISI Marked) Heating Element. • Fitted with pressure gauge • Fitted with Pressure release valve disable at 17 psi pressure. • Provided with Inlet & Outlet for cold water. • Having opening lid on the top of vessel for easy cleaning. • Provided with in line filter for sterile in coming & out going air. • Inoculation pot & sampling pots are fitted with one pot fitted with Temperature Gauge. • Whole assembly is covered with steam jacket. • Steam jacket if fitted with safety valve. • Operating Voltage: 220 Volts AC (50 Hz)

• Brand NameAPS

We offer Freezer Dryer. • Housed in a super structure steel frame it is mounted on swivel casters. • Complete with Perspex see through lid, gasket and control instruments i.e. Microprocessor Based Digital Temperature Controller for measurement of Temp. & Electronic digital Vacuum Indicator. • The unit made out of hermetically sealed compressor and can be optionally fitted with 100 litters min direct motor drive rotary vane type vacuum pump of double stage with Air ballast having ultimate vacuum of 1x10-3 torr on pump head. • High grade PUF INSULATED between outer and inner chamber for minimal thermal losses. • Condenser Trap: All non-magnetic stainless steel fabricated, argon welded, dished-bottom for complete effluent removal. • Refrigeration coils made of copper bonded to outside of condenser heavily insulated. Temp. up to (-)400 C at ambient temperature of 200 C is maintained through a MICROPROCESSOR BASED DIGITAL TEMPERATURE INDICATOR - CUM - CONTROLLER. • Vacuum Drum has 6 or 12 port manifold (Main drying chamber) made of stainless steel non-magnetic grade with Perspex top cover. (CFC FREE AND PUFF INSULATED).

• Brand NameAPS

We offer Horizontal Rectangular Autoclave - (Triple walled with steam jacket and separate Boiler). The Autoclave is mounted on a M.S. tubular stand. This Autoclave’s Inner & Outer chamber & steam jacket are made of S.S. 304. Steam jacket allows Dry sterilization. Hinged door is made of Stainless steel. Radial locking arms prevent opening of the door while steam is inside the chamber. Gasket is of synthetic neoprene, Steam is generated in a separate boiler which is placed below the Main body. The steam generator is fitted with easily replaceable Heaters and water level indicator. Autoclave hold pressure at selected Point between 10 to 20 psi +- 3 psi pressure control switch has Markings which are approximate, correct pressure is as shown by the pressure gauge Hydraulically tested at 40psi. Fitted with safety Valves, pressure gauge. Hydraulically tested at 40psi. Fitted With safety valves, pressure gauges, air filter, steam release valve, Stream trap, and one tray. 1Kg. Cm2 = 14.7 psi. • Available in following capacities Size Litter Capacity Load • 450mmX600mmX900mm 240 Litters 18 kw • 600mmX600mmX1200mm 435 Litters 24 kw • 600mmX900mmX1500mm 810 Litters 36 kw

• Brand NameAPS

We offer Horizontal Autoclave-(Triple walled with Steam Jacket). The autoclave is mounted on a Mild Steel tabular stand. The autoclave Chamber & steam jacket are made of 14 SWG. Stainless steel, Outer shell which serves as a cover is made of stainless Steel. Steam jacket allows dry sterilization. Hinged door is made of stainless steel. Radial Locking arms prevent opening of the door while Steam is inside the chamber. Autoclave is fitted with neoprene gasket; steam is generated in a separate boiler which is placed below the main body. Multiport valve is provided for Steam, dry sterilization & steam exhaust. Autoclave is fitted with easily replaceable heaters and water level indicator. Autoclave holds pressure at selected point between 10 to 20psi +- 3 psi. Pressure control has markings which are approximate; the actual pressure is as shown by the pressure gauge. Hydraulically tested at 40psi. Fitted with safety valves pressure is as shown by the pressure gauge. Hydraulically tested at 40psi. Fitted with safety Valves pressure gauges, steam release valve, steam trap, and one tray Available in following capacities Size Litter Capacity Load 350mmX550mm 52 Litters 6 Kw 400mmX600mm 75 Litters 9 kw 400mmX1100mm 138 Litters 12 kw 450mmX600mm 95 Litters 9 kw 500mmX1200mm 235 Litters 12 kw 600mmX1200mm 340 Litters 15 kw

• Brand NameAPS

We offer Incubator . • Specially designed for incubation of Biochemical Oxygen demand on water and sewage; can be used as environmental study and growth chamber by incorporating lighting and humidification system. • Used in various applications for microbiology, cell cultivation of animals, plants & food studies- where experiments requiring low temperature conditions. Used for microorganism or activation, good storage and desalting process of enzyme extracts and for preservation of vaccines, insulin, level extracts, a* 15°C for serological and complement fixation tests for enzymatic digestion process. SALIENT FEATURES & CONSTRUCTION • Robust construction outer chamber is made of Mild Steel duly pre treated & finished with powder coated paint for lasting finish. • Inner chamber made of STAINLESS STEEL SHEET (304 Grade). • Fitted with durable coaxial blower for forced air circulation at triple walled back to maintain temperature uniformity in the chamber. • Outer front double walled door is insulated and is fitted with magnetic tape for air tight closing for no temperature loss, provided with lock and key arrangement. • Door operated illumination lamp is fitted inside the chamber for easy visibility. • A full view inner plexi-glass door enables inspection and monitoring of inner chamber specimens without disturbing the process temperature. • High grade PUF INSULATION between outer and inner chamber for minimal thermal losses. • Cooling is done by finned tube evaporator lie in the air circulation path by ISI marked CompressorCondensing Units CFC free & R-134 a eco friendly refrigerant. • Heating elements are placed in the path of moving air duly insulated from the body. • Inner chamber has ribs for placing the shelves at convenient levels. Supplied with 2 or 3 removable shelves. •

• Brand NameAPS

We offer Freezer Dryer. • Housed in a super structure steel frame it is mounted on swivel casters. • Complete with Perspex see through lid, gasket and control instruments i.e. Microprocessor Based Digital Temperature Controller for measurement of Temp. & Electronic digital Vacuum Indicator. • The unit made out of hermetically sealed compressor and can be optionally fitted with 100 litters min direct motor drive rotary vane type vacuum pump of double stage with Air ballast having ultimate vacuum of 1x10-3 torr on pump head. • High grade PUF INSULATED between outer and inner chamber for minimal thermal losses. • Condenser Trap: All non-magnetic stainless steel fabricated, argon welded, dished-bottom for complete effluent removal. • Refrigeration coils made of copper bonded to outside of condenser heavily insulated. Temp. up to (-)400 C at ambient temperature of 200 C is maintained through a MICROPROCESSOR BASED DIGITAL TEMPERATURE INDICATOR - CUM - CONTROLLER. • Vacuum Drum has 6 or 12 port manifold (Main drying chamber) made of stainless steel non-magnetic grade with Perspex top cover. (CFC FREE AND PUFF INSULATED).

• Brand NameAPS

We offer Horizontal Deep Freezer . • Also used for preservation of red blood plasma, white blood cell, skin, bone, bacteria, semen, biomedical product in small medium and large blood centres. • Suitable for hospitals, drugstore, pharmaceuticals factories, sanitation and anti-epidemic stations and clinics. SALIENT FEATURES & CONSTRUCTION • Robust construction Outer chamber is made of Mild Steel duly pre treated & finished with powder coated paint for lasting finish. • Inner chamber made of STAINLESS STEEL SHEET (304 Grade). • Outer front double walled door is insulated and is fitted with magnetic tape for air tight closing for no temperature loss, provided with lock and key arrangement. • Door operated illumination lamp is fitted inside the chamber for easy visibility. • A full view inner plexi-glass door enables inspection and monitoring of inner chamber specimens without disturbing the process temperature. • High grade PUF INSULATION between outer and inner chamber for minimal thermal losses. • Direct cooling system for stable temperature control by ISI marked CompressorCondensing Units CFC free & R-134 a eco friendly refrigerant. • Control panel having all controls and circuitry are housed at the top fitted with Temperature controller cum Indicator Microprocessor based with LED display for Set Value (SV) & Process Value (PV) to select any desired temperature provided with Volt meter on the panel to read the incoming voltage. • Caster wheel mounted for easy portability. • Supplied with cord and plug. • Operating Voltage: 220 Volts AC (50 Hz).

• Brand NameAPS

We offer Fermenter Vessel. APPLICATIONS • Fermenter Vessel made of stainless steel is ideal for doing fermentation in large volume. • Fermenter Vessel is low cost options for general Fermentation- ideal for R&D labs etc, Agriculture, Pharmaceutical, and Food & Beverage Industries. SALIENT FEATURES & CONSTRUCTION • Complete Assembly constructed from S. S. 304 Grade. • Heated through steam heating system by immersion type (ISI Marked) Heating Element. • Fitted with pressure gauge • Fitted with Pressure release valve disable at 17 psi pressure. • Provided with Inlet & Outlet for cold water. • Having opening lid on the top of vessel for easy cleaning. • Provided with in line filter for sterile in coming & out going air. • Inoculation pot & sampling pots are fitted with one pot fitted with Temperature Gauge. • Whole assembly is covered with steam jacket. • Steam jacket if fitted with safety valve. • Operating Voltage: 220 Volts AC (50 Hz)