Wall mount PIR 180 Degrees

Time-delay: min: 8s3sMax: 7min2minWorking humidity:

PIR 360 has found use in conference halls, cabins, labs, etc.Application : Conference halls, cabins, library, labs. Etc.Power Source : 220240V/ACRated Load : 1200W(220240V/AC)Time Delay : 5Sec.9Min.Detection Distance : 7m( 24 adjustable)Work Temperature : -20+40Power Consumption : 0.45W(static 0.1WInstallation Height : 1.5-3.5m

PIR 180 is used at areas where a person is present for a short while, like porch/entry areas, change room, corridors, passages, garages/parking areas, urinal areas, etc.Application : Porch/entry areas, change room, corridors, passages, urinalsPower Source : 220V/AC240V Detection Distance : 7m max (

Our Pulse Timer is Used Along with a Pir Sensor and from the Moment that the First Detected Switch is Kept On, the Light Too is Switched On for a Period. Our Adjustable Pulse Timer Comes with the Facility of Adjustable Timer Setting for Specific Processes. Because of Its Availability in a Wide Range At Affordable Prices, the Customers Get a Number of Options. as One of the Leading Electronic Pulse Timer Manufacturers in India, We Assure that the Cost of the Equipment Will Be Recovered Completely as It Has a Long Life. first Pulse Timer (extension of the Timer Up to 1.5 Hours) applications : Lights are Kept On At the Stores and also At Areas Where Some Processes are Done for Say About 20 Minutes. the Timer is Set for 30 Minutes After the Person Enters; the Lights are Kept On for that Period and Then Switched Off.

Function: - External lighting's can be turned on, based on the ambient light levels which can be set to the desired switch on point. The Switching off can be programmed such that the timer will turn off the lights after settable times 2, 3, 4, 6, 8, hours from turn on time, or it could be set for dusk to dawn continuous lighting. Applications:- Hoardings, street lights and common areas of Societies, landscaping etc. Specifications of Twilight Unit Sensitivity: - Can be set to trigger below 0.5 Lux of light intensity.Supply operation: - 230 Volts AC.Contact rating: - 5 Amps at 230 Volts dry contacts (for higher ratings a contactor could be operated with this unit).Programmable timer:- To switch off after 2, 3, 4, 6, 8 hours from time of automatic switch on, also it could be set from dusk to dawn.

Shed off your responsibility of switching the lights on and off by installing our unique electronic twilight switch. The switching on and off of external lightings can be set on a desired level with our twilight switch. This product focuses on the maximum energy conservation as it is one of the alarming situations of the present scenario. Its sensitivity can be set to trigger in intensity of less than 0.5 lux. Highly durable and highly efficient are the terms that best describe this product of ours. Today, we are considered to be one of the major automatic twilight switch suppliers in India. Function : External lightings can be turned on and off, based on the ambient light levels which can be set to the desired switch on point. Advantage : Since the lightings are turned on and off when it is required, electricity is saved to about 15 %. No attendant is needed to perform this function. Install and Forget. Specifications Sensitivity : Can be set to trigger below 0.5 Lux of light intensitySupply operation : 230 Volts ACContact rating : 5 Amps at 230 Volts dry contacts(for higher ratings a contactor could be operated with this unit)

PIR Ceiling mount :-

Power Source: 220240V/AC

Power Frequency: 50-60Hz

Ambient Light: