Post Buy Requirement
AT
Hapur, Uttar Pradesh, India
gstGST : 09AAJFA0836D1ZR Add Review

Testing Equipment

Crump Flex Tester

1.25 Lakh /Piece Get Latest Price
  • Min. Order (MOQ) 1 Piece(s)
Used for flexing properties of coated fabrics. It is motor operated to compress and twist the sample at a time.
View Complete Details

Pneumatic Bursting Strength Tester

  • Min. Order (MOQ) 1
  • Type Bursting Strength Tester
  • Color Grey
  • Voltage 220V
  • Condition New
  • Power 1-3kw
  • Driven Type Electric
  • Warranty 1year
  • Certificate ISO 9001:2015
  • Weigth 60-80kg
  • Automation Grade Semi Automatic
  • Country of Origin India
  • Paper Packaging Industries Testing Equipment Coefficient Friction Testers
  • Pneumatic Bursting Strength Tester Paper Thickness Gauge
  • Humidity Chamber Analog Bursting Strength Tester
  • Bursting Strength Tester Cobb Tester
  • Folding Endurance Tester Round Cutter
  • Elemdrorf Tearing Strength Tester GSM Balance
  • Box Compression Tester Digital Bursting Strength Tester
  • Computerized Bursting Strength Tester Stiffness Tester 

The ASIAN Pneumatic Bursting Strength Tester is designed to find bursting strength of fabric/ leather/ paper/paperboard & corrugated box. A test specimen is held between two annular clamps under sufficient pressure to minimize slippage. The upper clamping surface which is in contact with the test specimens has continuous spiral grooves. A circular diaphragm of pure gum rubber is clamped between the lower clamping plate & pressure cylinder so that before the diaphragm is stretched by pressure underneath it the center of its upper surface is below the clamping surface. The equipment is fitted with a motor driven cam mechanism, which increases fluid displacement on the lower side of the diaphragm at a specified rate. The equipment is fitted with an arrangement, which automatically brings down the pressure and stops the motor on completion of the test cycle. A maximum reading type pressure gauge gives the bursting pressure. The equipment is ruggedly designed to give a long & trouble free life. The components are brighter chrome plated or painted in metallic paint to give the tester an aesthetic appearance. Digital type pressure gauge type instruments are also available. Digital type pressure gauge with pneumatic clamping model also available.










HomePaper Packaging Industries Testing Equipment Pneumatic Bursting Strength Tester













Pneumatic Bursting Strength Tester

The ASIAN Pneumatic Bursting Strength Tester is designed to find bursting strength of fabric/ leather/ paper/paperboard & corrugated box. A test specimen is held between two annular clamps under sufficient pressure to minimize slippage. The upper clamping surface which is in contact with the test specimens has continuous spiral grooves. A circular diaphragm of pure gum rubber is clamped between the lower clamping plate & pressure cylinder so that before the diaphragm is stretched by pressure underneath it the center of its upper surface is below the clamping surface. The equipment is fitted with a motor driven cam mechanism, which increases fluid displacement on the lower side of the diaphragm at a specified rate. The equipment is fitted with an arrangement, which automatically brings down the pressure and stops the motor on completion of the test cycle. A maximum reading type pressure gauge gives the bursting pressure. The equipment is ruggedly designed to give a long & trouble free life. The components are brighter chrome plated or painted in metallic paint to give the tester an aesthetic appearance. Digital type pressure gauge type instruments are also available. Digital type pressure gauge with pneumatic clamping model also available.





















Yes I am Interested






Additional Information:

Payment Terms : T/T

Delivery Time : 10 Days

Product Range

Paper Packaging Industries Testing Equipment Plastic Testing Equipment Fabric Testing Equipment
Yarn Testing Equipment Footwear Testing Equipment Leather Testing Equipment
Rubber Testing Equipment Coated Fabric Testing Equipment Foam Testing Equipment
Tensile Testing Machine Metal Testing Machines Automobile Testing Machines
Wood Testing Equipments Computerized Universal Testing Machine Electrical Test Equipments
Cone Calorimeter  
View Complete Details

Computerized Bursting Strength Tester

  • Min. Order (MOQ) 1
  • Type Bursting Strength Tester
  • Color Grey
  • Voltage 220V
  • Condition New
  • Power 1-3kw
  • Driven Type Electric
  • Warranty 1year
  • Certificate ISO 9001-2015
  • Weigth 60-80kg
  • Automation Grade Semi Automatic
  • Country of Origin India
Computerized Bursting Strength Tester of any material such as fabric, leather, paper, paperboard & corrugated box etc. It's strength under multi-directional force and is defined, as the hydrostatic pressure required producing rapture of the material when pressure is applied at a controlled increasing rate through a rubber diaphragm.


Technical Specification:



  • Capacity: 35kg /cm2

  • Opening in upper clam: 30.5 mm diameter

  • Opening in lower clamp: 38.1 mm diameter

  • Rate of fluid displacement: 95 cc/ minute

  • Test fluid: Glycerin

  • Gear Box: Worm reduction type

  • Power required: 220V AC, 500 W, 50 Hz single phase

  • Phase : Single

  • Watt : 500W

  • Frequency : 50 HzComputerized Bursting Strength Tester of any material such as fabric, leather, paper, paperboard & corrugated box etc. It's strength under multi-directional force and is defined, as the hydrostatic pressure required producing rapture of the material when pressure is applied at a controlled increasing rate through a rubber diaphragm.

    Technical Specification:



    • Capacity: 35kg /cm2

    • Opening in upper clam: 30.5 mm diameter

    • Opening in lower clamp: 38.1 mm diameter

    • Rate of fluid displacement: 95 cc/ minute

    • Test fluid: Glycerin

    • Gear Box: Worm reduction type

    • Power required: 220V AC, 500 W, 50 Hz single phase

    • Phase : Single

    • Watt : 500W

    • Frequency : 50 HzComputerized Bursting Strength Tester of any material such as fabric, leather, paper, paperboard & corrugated box etc. It's strength under multi-directional force and is defined, as the hydrostatic pressure required producing rapture of the material when pressure is applied at a controlled increasing rate through a rubber diaphragm.

      Technical Specification:



      • Capacity: 35kg /cm2

      • Opening in upper clam: 30.5 mm diameter

      • Opening in lower clamp: 38.1 mm diameter

      • Rate of fluid displacement: 95 cc/ minute

      • Test fluid: Glycerin

      • Gear Box: Worm reduction type

      • Power required: 220V AC, 500 W, 50 Hz single phase

      • Phase : Single

      • Watt : 500W

      • Frequency : 50 Hz








Additional Information:

Payment Terms : L/C, T/T

Delivery Time : 20 Days

Paper Packaging Industries Testing Equipment
Coefficient Friction Testers Pneumatic Bursting Strength Tester Paper Thickness Gauge
Humidity Chamber Analog Bursting Strength Tester Bursting Strength Tester
Cobb Tester Folding Endurance Tester Round Cutter
Elemdrorf Tearing Strength Tester GSM Balance Box Compression Tester
Digital Bursting Strength Tester Computerized Bursting Strength Tester Stiffness Tester
View Complete Details

Leather Testing Equipments

We manufacture all type of Leather testing equipments.
View Complete Details

Tensile Strength Tester

1 Lakh - 10 Lakh /Piece Get Latest Price
  • Min. Order (MOQ) 1 Piece(s)
  • Type Tensile Strength Tester
  • Application Strength Testing
  • Color Blue
  • Voltage 220V
  • Condition New
  • Power 1-3kw
  • Driven Type Electric
  • Warranty 1year
  • Certification ISO 9001:2015
  • Weigth 80-100kg
  • Automation Grade Semi Automatic
  • Country of Origin India
  • Brand Name Asian
  • Certification ISO:9001-2015


tensile strength tester and elongation are the two prime characteristics of most of the raw materials, whether they are metals or non-metals such as foam, rubber, textiles, plastic, paper or finished products such as rods, wires, ropes, yarns, belts etcetera. These properties very often play the major role in determining the suitability of any raw material for any specific application. It is, therefore, of utmost importance to determine these characteristics accurately, conveniently, and quickly.



technical specification



  • range: 250 kg with 0.1 kg least count digital display

  • elongations: up to 900 mm x 0.1 mm least count digital display

  • traverse speed: 300 & 500 mm/min

  • motor: 1/2 hp, 1425 rpm, 220 v ac single phase induction motor

  • power required: 220 v ac, 500 w, single phase

  • capacity (kilogram) : 500 kg

  • least count (gram) : 100

  • test speed (mm/minute) : 300mm/min and 500 mm/min

  • resolution (millimetre) : 0.1 mm

  • display type : digital




Additional Information:

Payment Terms : L/C, T/T

Delivery Time : 15 Days

View Complete Details

Bursting Strength Tester

90,000 - 3 Lakh /Unit Get Latest Price
  • Min. Order (MOQ) 1 Piece(s)
  • Country of Origin India
  • Type Bursting Strength Tester
  • Application Strength Testing, Industrial Use
  • Color Multi
  • Voltage 220V
  • Condition New
  • Power 1-3kw, Electrical/Electronics
  • Driven Type Electric
  • Warranty 1year
  • Certificate ISO9001:2015
  • Weigth 60-80kg
  • Automation Grade Semi Automatic
  • Brand Name Asian
  • Standard ISO

Bursting Strength Tester of any material such as fabric, leather, paper, paperboard & corrugated box etc. It's strength under multi-directional force and is defined, as the hydrostatic pressure required producing rapture of the material when pressure is applied at a controlled increasing rate through a rubber diaphragm.


Technical Specification:



  • Opening in upper clamp: 30.5 mm diameter

  • Opening in lower clamp: 38.1 mm diameter

  • Rate of fluid displacement: 95 cc/ minute

  • Test fluid: Glycerin

  • Gear Box: Worm reduction type

  • Power required: 220 V AC, 500 W, 50 Hz single phase


Additional Information:

Payment Terms : T/T

Delivery Time : 10 Days

Paper Packaging Industries Testing Equipment
Coefficient Friction Testers Pneumatic Bursting Strength Tester Paper Thickness Gauge
Humidity Chamber Analog Bursting Strength Tester Bursting Strength Tester
Cobb Tester Folding Endurance Tester Round Cutter
Elemdrorf Tearing Strength Tester GSM Balance Box Compression Tester
Digital Bursting Strength Tester Computerized Bursting Strength Tester Stiffness Tester
View Complete Details

Limited Oxygen Index Apparatus

  • Min. Order (MOQ) 1
  • Type Testing Apparatus
  • Certification ISO 9001:2008
  • Application Testing Use
  • Weight 30-40kg
  • Color Multi
  • Voltage 220V
  • Condition New
  • Power 100-200W
  • Driven Type Electric
  • Warranty 1yrs
  • Automation Grade Semi Automatic
  • Country of Origin India
  • Brand Name Asian
  • Certificate ISO 9001-2015

ASIAN Limited Oxygen Index Apparatus consists of a test chimney made of borosilicate glass suppurated by the metallic base and hook with the help of the metallic pillar. The mixture of nitrogen and oxygen is released from the bottom of the tube. The tube is filled with glass beads for mixing and evenly distributing the gas mixture. The specimen holder, which holds the test specimen, made of U shape and fixed at the center of the chimney. There is the porous screen mounted below the level of the specimen holder, to prevent falling combustion debris from fouling the gas entry and distribution paths. There is a digital temperature indicator cum controller with a thermocouple for the measurement. A copper tube with a suitable orifice for pilot flame is provided for igniting the specimen by inserting it from the top of the test column. The digital preset timer and buzzer are also mounted in the instrument. Two rotameter with needle valve is provided to control and measure oxygen and nitrogen flow in the test chimney. A timer for indicating the time of burning with a reset switch. The rotameter, temperature controller, timer are fitted in the sheet panel. The test chimney is fitted separately on the metallic platform. Gasses, gas cylinders and its fittings are not provided with the equipment and have to be arranged by the purchaser.



TECHNICAL SPECIFICATION



  • Dimensions of test column: 75 mm inside diameter x 450 mm long

  • Rota meters: 0.625 to 6.25 liter/minute for oxygen & 1.05 to 10.5 liter/minute for nitrogen

  • Temperature indicator: Up to 199 degree C x 1 degree C

  • Timer: Timer Up to 999 seconds x 1 second




Additional Information:

Payment Terms : L/C, T/T

Delivery Time : 15 Days

Plastic Testing Equipment
Limited Oxygen Index Apparatus Temperature Of Deflection Under Load Apparatus Smoke Density Tester
Smoke Visibility Tester Melt Flow Index Tester Apparatus for Temperature Of Deflection Under Load
Pendulum Impact Testing Machines Asian Heat Deflection Tester Heat Deflection Temperature Tester
Plastic Testing Equipment Toxicity Chamber Melt Flow Indexer Testing ApparatusC
View Complete Details

Smoke Density Tester

  • Min. Order (MOQ) 1
  • Material Aluminium
  • Application Laboratory
  • Weight 20kg
  • Feature Best Quality, Easy To Use
  • Voltage 220V
  • Finishing Power Coated
  • Power Supply Electric
  • Phase Single Phase
  • Warranty 1 Year
  • Country of Origin India

ASIAN Smoke Density Tester is constructed using 14 gauge aluminum box, which is hinged a heat resistant glass glazed door. This box is mounted on the base which houses the controls. Dependent upon the materials tested, the metal may require protection from corrosion. The chamber is sealed except for 25 by 30mm (1by 9in.) openings on the four sides of the bottom of the chamber. A liters/min specified capacity blower is mounted on one side of the chamber. The inlet duct to the bowler is equipped with a close fitting damper. The outlet of the bowler will be connected through a duct to the laboratory exhaust system. The two sides adjacent to the door are fitted with 70mm (2/3in) diameter smoke tight glazed areas entered 480mm (19/4 in.) above the base. At these locations and outside the chamber, boxes containing the optical equipment and additional controls are attached. A removable white plastic plate is attached to the back of the chamber. There is a clear area centered above the bottom of the chamber. Through which is seen an illuminated white on the red exit sign. The white background permits observations of the flame, smoke, and burning characteristics of the materials. The viewing of the exit sign helps to correlate visibility and measured values. The specimen holder is supported on a square gauge. Stainless steel wire cloth above the base and equidistant from all sides of the chamber. This screen is lying in a stainless steel bezel supported by a rod through the right side of the chamber. From the same rod similar bezel is located below and it supports a square of asbestos paper which catches any particles that may drip from the specimen during the test. By rotating the specimen holder rod, the burning specimen can be quenched in a shallow pan of water positioned below the specimen holder.


The specimen is ignited by a propane flame from a burner operating at a specified pressure. The fuel is mixed with air which has been propelled through the burner by the venturi effect of the propane as it passes through a small orifice. The burner is designed to provide adequate outside air. the burner is capable of being positioned quickly under the specimen so that the exit of the burner falls on a line passing through a point 8mm above the base at one corner of the chamber extending diagonally across the chamber and sloping upwards at 45 deg with the base. There is a control panel which controls and indicate the supply of gas. Lux of the light measurement system of the mounted light source also mounted in the instrument. There is a digital timer mounted in the instrument to indicate the time.


Additional Information:

Payment Terms : L/C, T/T

Delivery Time : 15 days

Plastic Testing Equipment
Limited Oxygen Index Apparatus Temperature Of Deflection Under Load Apparatus Smoke Density Tester
Smoke Visibility Tester Melt Flow Index Tester Apparatus for Temperature Of Deflection Under Load
Pendulum Impact Testing Machines Asian Heat Deflection Tester Heat Deflection Temperature Tester
Plastic Testing Equipment Toxicity Chamber Melt Flow Indexer Testing Apparatus
View Complete Details

Fogging Tester

  • Min. Order (MOQ) 1
  • Type Automobile test
  • Certification ISO 9001:2008 Certified
  • Application Laboratory
  • Color Multicolor
  • Feature Easy To Use, Superior Finish
  • Condition New
  • Frequency 50Hz
  • Automatic Grade Semi Automatic
  • Power Source Electric
  • Operating Current Single Phase
  • Warrenty 1year
  • Brand Name Asian

The Fogging Tester is specially designed equipment for testing the fogging characteristics or VOCs of leather, plastics, vinyl and textiles for automotive, aerospace and other transportation vehicles.This fogging tester comprises of following equipment.





  • Thermostatically Controlled Bath: Available with all safety devices for over- heating, this is designed to operate at up to 130C. All the parameters like bath capacity, circulation system and heating system work in coordination as to control the temperature within+0.5C throughout the bath. A slow and uniform speed is maintaining for the agitation of the bath.

  • Note: There is a centrifugal pump at the bottom of some of the heaters and circulators that enable the pumping of liquid at high speed around the bath. Passing liquid in the beakers have different speeds and this will cause differentiation in the temperatures of different beakers. The distance between the bath fluid and lower surface of the glass plate should be 60+2 mm.

  • Cooling Plates: Hollow in structure, these cooling plates are made from rust-proof metals with aluminum on the side facing the glass plate. These are specially designed for keeping the glass plates cool. The cooling water flows through a whole of the plate with two connections. A minimum weight of 1kg should be maintained in the cooling plate filled with to overcome the buoyancy of the beaker in the bath. For each different beaker, a separate cooling plate is used. Designing of the cooling plates and water thermostat is done in such a way that the mean temperature of water remains at 21C and the temperature difference between the inlet and outlet does not exceed 1C.

  • Flat bottomed beakers: These are made from heat-resistant glass

  • Metal rings: Made from rust proof steel, these rings are used to keep the test pieces flat.

  • Sealing Rings: These rings are L- shaped or circular, made from silicone or fluoro rubber.

  • Float-glass plates: These plates are available in residential or windshield window quality for condensation of the fogging. Available in the tin and not- tin finish, these glass plates have reflectometer values within+2% units.

  • Note: Identification of the tin and non-tin surfaces of the glass plates can be done by viewing in a darkened room under a UV light at 254 nm wavelength. When exposed to UV light, the tin surface of the plate will fluoresce. Filter paper

  • Aluminum foil discs: These discs are stored in a dedicator for avoiding condensation and contamination

  • Reflectometer: also known as gloss meter

  • Spacer: This type of spacer is specially installed during reflectometer measurements to prevent contact with the condensate on the glass plate. These are made from high-grade materials such as paper or plastic with a circular hole for the measurements.

  • Dishwasher

  • Balance

  • Polyethylene gloves

  • Desiccators: These are available with suitable drying material






TECHNICAL SPECIFICATIONS



  • External diameter: 80mm

  • Internal diameter: 74mm

  • Height: 10mm

  • Mass: 55+1g














Additional Information:

Payment Terms : L/C, T/T

Delivery Time : 30 days

More Range of Automobile Testing Machines
 

Automobile Testing Machines
Compressibility And Recovery Tester Fogging Tester Salt Spray Chamber
Coating Thickness Gauge Horizontal Flammability Tester Leakage Testing Machine for Separator Set Fuel Filler
Leakage Testing Machine for Fuel Pipe Leakage Testing Machine for Head Lamps

View Complete Details

Footwear Testing Equipments

We manufacture all type footwear testing equipments.
View Complete Details

Box Compression Tester

2 Lakh /Piece Get Latest Price
  • Min. Order (MOQ) 1 Piece(s)
  • Brand Name Asian
  • Certification ISO
  • Application Carton Box
  • Power electrical/electronics operated
The Asian Box Compression Tester made of a set of plates one is attached to the load measuring arrangement and the other is movable plate which is move with the help of motor, gearbox, and screw and nut arrangement, the movable plate have the facility of over travel and under travel. The load measuring arrangement is digital type. The box of which the compression strength is to be determined is placed on the lower plate, due to the motion of the movable plate the box is compressed and the compression load is directly read out on the digital indicator on the panel. The deflection of the box also measured with the help of the digital deflection indicator.
View Complete Details

Digital Compression Tester

  • Brand Name Asian
  • Application Industrial use
  • Power electrical/electronics operated
  • Certification Yes
Different size and capacity available range from 50 kg to 5000 kgf. and the plateform available 100mm X100 mm to 1500 mm X 1500 mm
View Complete Details

Heat Release Rate Tester

25 Lakh /Piece Get Latest Price
  • Min. Order (MOQ) 1 Piece(s)
Asian heat release tester
the test method is based on the observation that, generally, the net heat of combustion is proportional to the amount of oxygen required for combustion. The relationship is that approximately 13, 1 103 kj of heat are released per kilogram of oxygen consumed. Specimens in the test are burned under ambient air conditions, while being subjected to a predetermined external irradiance within the range of 0 kwm2 to 75 kw m2 and measurements are made of oxygen concentrations and exhaust gas flow rates.
the apparatus is made of following parts,

cone-shaped radiant electrical heater
radiation shield
irradiance control
weighing device
specimen holder
retainer frame
exhaust gas system with flow measuring instrumentation
gas sampling apparatus
ignition circuit
ignition timer
oxygen analyser
heat flux meters
calibration burner
data collection and analysis system
side screens
smoke system thermocouple

technical data:
cone-shaped radiant electrical heater: 5 000 w at 230 vac
irradiance control: pid type upto 10000c
weighing device: 1000 gm x 0.1 gm least count
ignition circuit :spark plug powered from a 10 kv transformer
oxygen analyser: paramagnetic type, with a range of at least 0 % oxygen to 25 % oxygen
heat flux meters:upto (100 10) kw m2
calibration burner: square orifice with an area of (500 100) mm2
data collection and analysis system: ni software

related standard
bs iso 5660-1:2015
iso 5660-1:2015(e)
View Complete Details

Dart Impact Tester

65,000 /Piece Get Latest Price
  • Min. Order (MOQ) 1 Piece(s)
  • Brand Name Asian
  • Power Electrical/Electronics
  • Application Industrial Lab
  • Application Quality control of plastic film
The asian dart impact tester consists of the following parts:

1. specimen clamp a two piece annular specified clam with facility to vaccume clamping.

2. electromagnet for supporting and release the dart assembly.

3. height adjustment system means to provide the positioning of the dart at specified height.

4. cushioning and shielding device to protect

5. personal and to avoid damaging the impinging surface of dart.
View Complete Details

Dry Sand Abrasion Tester

  • Min. Order (MOQ) 1
  • Type Digital Tester
  • Certification ISO 9001:2008 Certified
  • Application Industrial Use
  • Color Multicolor
  • Feature Easy To Use
  • Condition New
  • Frequency 50 Hz
  • Automatic Grade Semi Automatic
  • Power Source Electric
  • Operating Current Single Phase
  • Warrenty 1year
  • Temperature Capacity Medium Temperature
  • Puncture Voltage 220V
  • Brand Name Asian
  • Minimum Orde Quantity 1 Piece
  • Colour Powder coating
  • Grade Semi-Automatic
  • Type of Testing Machines Metal

TheDRY SAND ABRASION TEST RIGhas been designed as per ASTM G 65 specifications. This test uses a rubber-rimmed wheel as the bed for silica abrasive that is fed from a hopper by a nozzle between the sample and the wheel. The sample is pressed into the wheel by a dead weight loaded lever. The test is run for a set number of revolutions with automatic cutoff and the wear is measured by measuring the volume of material lost through mass loss and density measurements. The flow of sand into the gap between the surfaces is controlled by the geometry of the nozzle that must be very carefully defined to obtain the required sand flow rate. The abrasive only passes through the wear interface once and is thrown away at the end of the test. The uniform loading and uniform flow of abrasive into the gap between wheel and the specimen under controlled conditions give consistent results. The properties of the rubber lining of the wheel also have a major effect on the results and need to be carefully controlled.


Additional Information :



  • Item Code:ATEDrySand

  • Pay Mode Terms:L/C (Letter of Credit), T/T (Bank Transfer), D/P, D/A

  • Port of Dispatch:New Delhi

  • Production Capacity:5

  • Delivery Time:30 Days


Additional Information:

Payment Terms : L/C, T/T

View Complete Details

Horizontal Flammability Tester

  • Min. Order (MOQ) -4
  • Type Flammability Testers
  • Certification ISO 9001:2008 Certified
  • Application Fabric Flammability Uses, Industrial Use
  • Color Grey
  • Feature Easy To Use, Superior Finish
  • Condition New
  • Frequency 50Hz
  • Automatic Grade Semi Automatic
  • Power Source Electric
  • Operating Current Single Phase
  • Warrenty 1year
  • Temperature Capacity NA
  • Country of Origin India
  • Brand Name Asian
  • Power 220VAC

The Horizontal Flammability Tester for the interior of a motor vehicle consists of a stainless steel box. The box has four slots of specified width on the upper part of all sides and the bottom plate has 10holes of specified diameter. The box has an access window of a heat resistant glass plate on the front and a door that has a slot that allows U-shaped clamp enter the box, and a hole for passing a hose from a gas burner, on the side. The box is fitted with four legs and the bottom part raised by 10mm. the clamps made of metal of U-shape of a specified dimension. A Bunsen burner of specified dimension is fitted on the bottom of the stainless steel box. The length of flame control with the help of the needle valve. The flame of the burner is automatically controlled with the help digital preset timer and synchronous motor.



TECHNICAL SPECIFICATIONS



  • Size of chamber: 385 mm Wide, 204 mm Deep, 356 mm Height

  • Size of slit on the top: 12.7 mm

  • Inside diameter of burner: 9.5+0.5 mm

  • JASO M 313-83, FMVSS302, ASTM D5132

  • Stress Relaxation Testing Machine As per DIN 52913 & IS 2712: 1998

  • Gas Sealability Testing Machine As per ASTM F37 B

  • Creep Relaxation Testing Machine As per ASTM F38 B




Additional Information:

Payment Terms : T/T

Delivery Time : 15 days

View Complete Details

Compressibility Recovery Tester

  • Min. Order (MOQ) 1 Piece(s)
  • Type compressibility and recovery tester for automobile seal material
  • Certification ISO 9001:2008 Certified
  • Application Laboratory
  • Color Multicolor
  • Feature Easy To Use
  • Condition New
  • Frequency 50Hz
  • Automatic Grade Fully Automatic
  • Power Source Electric
  • Operating Current Single Phase
  • Warrenty 1year
  • Temperature Capacity Medium Temperature
  • Puncture Voltage 220V
  • Country of Origin India

We manufacturer Compressibility and Recovery Tester as per ASTM F 36



Technical Specification:



  • Area of specimen to be tested: 40 mm2

  • Diameter of test specimen: 22.6 mm

  • Diameter of indenter: 25 mm

  • Range of thickness measurement: 0 - 19 mm x 0.01 mm

  • Initial load on test specimen: 7 kPa (286 g)

  • Final load on test specimen: 2800 kPa (114 kg)

  • Range of spring dynamometer: 150 kg





Additional Information:

Payment Terms : L/C, T/T

Delivery Time : 30 days

Automobile Testing Machines
Compressibility And Recovery Tester Fogging Tester Salt Spray Chamber
Coating Thickness Gauge Horizontal Flammability Tester Leakage Testing Machine for Separator Set Fuel Filler
Leakage Testing Machine for Fuel Pipe Leakage Testing Machine for Head Lamps
 

View Complete Details

Smoke Visibility Tester

100 - 2 Lakh /Piece Get Latest Price
  • Min. Order (MOQ) 1
  • Material Board
  • Application Laboratory
  • Weight 100
  • Feature Best Quality, Easy To Use
  • Voltage 220V
  • Capacity 0.5 cubic meter
  • Finishing Power Coated
  • Power Supply Electric
  • Phase Single Phase
  • Warranty 1 Year
  • Country of Origin India























Smoke Visibility Tester

Smoke Visibility Tester made of a plywood chamber inner side painted by heat proof paint the ceiling of the chamber have a hole which permits to hold light meter cell while testing. There is a hole in the bottom of the chamber, which is aligning to the ceiling hole. There is a clear glass bulb fitted to the bottom hole. The left-hand side of the chamber has a hole, an exhaust fan fitted to the left-hand side hole. The right-hand side has a hole which permits to flow air at the time of the exhaust of the smoke to the chamber. The front of the chamber has a hinged door, which has a clear glass window on the door. There are shutters on the left-hand side and the right-hand side hole of the chamber. The LUX of the bulb control with the help of an electronics regulator fitted in the panel of the instrument. The ceiling hole and the front glass window covered with the black curtain. The chamber fitted on the section stand. A LUX meter is supplied with the instrument for the measurement of the LUX of the light. There is an aluminum silicate and a stainless steel plate also supplied with the instrument. There is a stainless steel specimen frame tilted at 20?a to the vertical and have the provision to hold the specimen and there is provision to slide the specimen frame. There is a burner mounted on the bottom of the chamber at an angle of 45. A flow meter, pressure gauge and pressure regulator are fitted on the section frame for the adjustment of the supply of the gas. All the parts are painted or polished for the corrosion resistance long life. We will not supply any gas with the instrument.






















DownloadPDF



Additional Information:

Payment Terms : L/C, T/T

Delivery Time : 20 Days

View Complete Details

Melt Flow Index Tester

  • Min. Order (MOQ) 1
  • Type Melt Flow Index Tester
  • Material 50
  • Certification ISO 9001:2008 Certified
  • Color Grey
  • Feature Easy To Use, Superior Finish
  • Condition New
  • Automatic Grade Semi Automatic
  • Power Source Electric
  • Operating Current Single Phase
  • Warrenty 1year
  • Temperature Capacity High Temperature
  • Country of Origin India
  • Brand Name Asian
  • Actual Size 22 (W) x 17 (D) x 19 (H)
  • Desiccators Diameter 300 mm
  • Desiccators Polycarbonate Polycarbonate
  • Rating 5A 230 V
  • Single Phase Vacuum Level 22
  • Timer 5 minute (mechanical)
  • Body Stainless Steel

AsianMelt Flow Index Testerfor plastic measures the melt flow index of the plastic material. The system consists of a heated extruder tube, an interchangeable jet through which the material under test is extruded, and a piston with dead weights to apply the specified pressure on the material inside the extruder tube. The extruded tube is made from carbon steel and is heated by means of a Bend Heater, which surrounds its outer circumference. A PID controller is provided to indicate & control the temperature of the tube. The heater clogged with mineral wool insulation. The assembly is fixed on a rigid stand. The bottom of the tube is lagged with an insulation of PTFE to prevent sticking of the extrudate. The jet through with the extruder is pushed out is made from hardened and ground die steel. It is held at the bottom of the extruder tube. The piston made from silver steel relieved at the upper end is provided to push the extrudate out of the jet. The piston moves inside the cavity of the tube. A sleeve to provide to guide the relieved portion of the piston. The top of the piston carries a plate-form for keeping the load on. The plate-form is thermally insulated from the load. The extruder tube assembly is mounted on a metal box. A sheet metal control panel is mounted on the side of the equipment & houses the PID Controller, DIGITAL PRESET TIMER & other electronic components. Cleaning tools for tube cavity and jets & stoppers & cutter for the extrudate are also supplied with the equipment.


TECHNICAL SPECIFICATION



  • Desiccators Diameter: 300 mm

  • Rating: 5A 230V

  • Single Phase Vacuum Level: 22

  • Timer: 5 minute (mechanical)

  • Desiccators Polycarbonate: Polycarbonate

  • Body: Stainless Steel

  • Actual Size: 22 (W) x 17 (D) x 19 (H)



Additional Information:

Payment Terms : L/C, T/T

View Complete Details

Cantilever Tensile Tester

  • Min. Order (MOQ) -1
  • Type Tensile Testing Machine
  • Certification ISO 9001:2008
  • Weight 400-500kg
  • Color Blue
  • Voltage 220V
  • Condition New
  • Automatic Grade Semi Automatic
  • Power 3-6kw
  • Driven Type Electric
  • Warranty 1year
  • Country of Origin India
  • Brand Name Asian
  • Application Insulator testing
  • Minimum Order Quantity 1 Piece
  • Grade Semi-Automatic
  • Supply AC








HomeTensile Testing Machine Tensile Strength Tester













Tensile Strength Tester

Tensile Strength Tester and elongation are the two prime characteristics of most of the raw materials, whether they are metals or non-metals such as foam, rubber, textiles, plastic, paper or finished products such as rods, wires, ropes, yarns, belts etcetera. These properties very often play the major role in determining the suitability of any raw material for any specific application. It is, therefore, of utmost importance to determine these characteristics accurately, conveniently, and quickly.





















Yes I am Interested





TECHNICAL SPECIFICATION



  • Range: 250 Kg with 0.1 kg least count digital display

  • Elongations: Up to 900 mm X 0.1 mm least count digital display

  • Traverse Speed: 300 & 500 mm/min

  • Motor: 1/2 Hp, 1425 rpm, 220 V AC single phase induction motor

  • Power required: 220 V AC, 500 W, single phase

  • Capacity (Kilogram) : 500 kg

  • Least Count (Gram) : 100

  • Test speed (Mm/Minute) : 300mm/min and 500 mm/min

  • Resolution (Millimetre) : 0.1 mm

  • Display Type : Digital









Cantilever & Tensile Tester

Mechanical failing load tester for insulator(Cantilever & Tension)

Name :Mechanical failing load tester for insulator (Cantilever & Tension)
Other Name :Cantilever/Tension failing load tester for ceramic/polymeric/glass insulator

This Mechanical failing load tester is designed to do type test and sample test on high voltage electrical insulators, testing their mechanical performance of cantilever failing load and tensile failing load. More than one type of machine produced by Contune International Corp have function of tensile test, and surely there are a lot of other types of testing machine which have function of cantilever (bending) test. This machine combines the two function into one machine.

In vertical direction, this testing machine can do tensile test for ceramic disc insulators, polymeric suspension insulators, polymeric tension insulators and glass disc insulators. In horizontal direction, a stable moving device is applied for cantilever test of ceramic post insulators, pin insulator (porcelain), polymeric pin insulators and polymeric post insulators. The tester is controlled by computer software. The testing strength , time and testing procedure can be controlled, which make it available to conform testing procedure and acceptance criteria in IEC standard(60383.1). This software has clear view of entire test process, curve and number indicating all necessary test data live, result of which can be saved and printed, very convenient to operate.

Standard Applied :IEC 60383.1-1993 mod, GB/T 1001.1-2003, GB/T 19443-2004 "Insulators for overhead lines with a nominal voltage above 1000V"

Additional Information:

Payment Terms : L/C, T/T

Delivery Time : 40 Days

View Complete Details

Wood Testing Equipment

  • Min. Order (MOQ) 1
  • Type Wood Testing Equipment
  • Application Wood Testing
  • Color Blue
  • Voltage 220V
  • Condition New
  • Power 1-3kw
  • Power Source Electric
  • Warranty 1 Year
  • Automation Grade Semi Automatic
  • Country of Origin India

In the market, we present a highly functional range of Wood Testing Equipments with excellent accuracy. These testing machines offer a complete spectrum of testing jobs in various industries like wooden, automotive, aerospace, paints, aviation, and many others. We have in our universal testing machines for determining the shear strength, compression strength and elongation of varied materials. Then, there is humidity chamber for maintaining the standing temperature and humidity level to get accurate properties of the test specimen. Fore testing the gloss and brightness of any objects surface, we have gloss meter. We have all the latest versions of this testing equipment, all in confirmation with the international standards of ASTM D412, D395, D429, GB 9754, IS 3400 and ISO 2813.

Specifications:



  • Model: ATE/UTM/60C

  • Straining/ piston speeds (mm/mm) (at no load): 0-150

  • Resolution of piston movement (mm): 0.1

  • Clearance for tensile at fully descended working piston (mm): 50-700

  • Clearance for compression test at fully descended working piston (mm) Clearance between columns (mm): 0-700, 500



Connected Load:



  • HP: 3

  • V: 400-440

  • Phase: 3



Dimensions:



  • LXWXH in (Inch): 72 x 30 x 82 (approx.)

  • Net Weight in (kg): 1700 (approx.)

  • Gross Weight in (kg): 2000 (approx.)



Standard Accessories:



  • Clamping jaws for round specimen diameter (mm): 10-25, 25-40 & 40-55

  • "Clamping jaws for flat specimens thickness (mm) Width: 0-15, 15-30, 70



For Compression Test:



  • Pair of compression plates of diameter (mm): 120



For Flexural Test:



  • Table with adjustable rollers, width of rollers (mm): 160

  • Diameter of the rollers (mm): 50

  • Max. the clearance between supports: 600

  • Radius of punch tops (mm): 16, 22


Additional Information:

Payment Terms : L/C, T/T

Delivery Time : 15 Days

View Complete Details

Spring Tester

  • Min. Order (MOQ) 1
  • Type Spring Tester
  • Certification ISO 9001:2008 Certified
  • Application Spring Testing
  • Color Multicolor
  • Feature Easy To Use
  • Condition New
  • Frequency 50 Hz
  • Automatic Grade Semi Automatic
  • Power Source Electric
  • Operating Current Single Phase
  • Warrenty 1year
  • Temperature Capacity Medium Temperature
  • Puncture Voltage 220V
  • Country of Origin India
  • Brand Name Asian
  • Power 220 VAC

Our company has brought a revolution in the spring and wire forming industry with advanced Spring Testers. With this machine, we provide cutting edge and non-destructive testing solutions to several industries. This is specifically developed to support industries continual efforts in manufacturing the better product at a lower cost. The offered testers are used for geometrical inspection of 2D and 3D wire formed parts.


Technical Specification:



  • Capacity: 100kg

  • Accuracy: 0.01kg

  • Least count for load: 0.1mm

  • Diameter of spring: Max. 100 mm

  • Length of spring: Max: 300 mm






Features:



  • Compression plate set for compression springs

  • Attachment for the tension springs

  • Motor operated

  • Worm reduction gearbox

  • Motor, screw mechanism and worm reduction gear box ensure smooth movement

  • Protection from over travel

  • Digital display of load and deflection






Application:



  • Spring and wire forming industry

  • Automotive industry

  • Plastic industry

  • Military industry

  • Aerospace industry


Additional Information:

Payment Terms : L/C, T/T

View Complete Details

Analog Bursting Strength Tester

  • Min. Order (MOQ) 1
  • Type Bursting Strength Tester
  • Application Strength Testing
  • Color Multi
  • Voltage 220V
  • Condition New
  • Power 1-3kw
  • Driven Type Electric
  • Warranty 1year
  • Certificate ISO 9001 :2015
  • Weigth 60-80kg
  • Automation Grade Semi Automatic
  • Country of Origin India

The ASIAN Analog Bursting Strength Tester is designed to find bursting strength of fabric/ leather/ paper/paperboard & corrugated box. A test specimen is held between two annular clamps under sufficient pressure to minimize slippage. The upper clamping surface which is in contact with the test specimens has continuous spiral grooves. A circular diaphragm of pure gum rubber is clamped between the lower clamping plate & pressure cylinder so that before the diaphragm is stretched by pressure underneath it the center of its upper surface. The equipment is fitted with a motor driven cam mechanism, which increases fluid displacement on the lower side of the diaphragm at a specified rate. The equipment is fitted with an arrangement, which automatically brings down the pressure and stops the motor on completion of the test cycle. A maximum reading type pressure gauge gives the bursting pressure. The equipment is ruggedly designed to give a long & trouble free life. The components are brighter chrome plated or painted in metallic paint to give the tester an aesthetic appearance. Digital type pressure gauge type instruments are also available. Digital type pressure gauge with pneumatic clamping model also available.


Technical Specification:



  • Opening in upper clamp: 30.5 mm diameter

  • Opening in lower clamp: 38.1 mm diameter

  • Rate of fluid displacement: 95 cc/ minute

  • Test fluid: Glycerin

  • Capacity: 0 to 50 kg/cm2x 0.1 kg/cm2least count


Additional Information:

Payment Terms : T/T

Paper Packaging Industries Testing Equipment
Coefficient Friction Testers Pneumatic Bursting Strength Tester Paper Thickness Gauge
Humidity Chamber Analog Bursting Strength Tester Bursting Strength Tester
Cobb Tester Folding Endurance Tester Round Cutter
Elemdrorf Tearing Strength Tester GSM Balance Box Compression Tester
Digital Bursting Strength Tester Computerized Bursting Strength Tester Stiffness Tester
View Complete Details

Fabric Testing Equipments

1.12 Lakh - 1.85 Lakh /Piece Get Latest Price
  • Min. Order (MOQ) 1 Piece
  • Type Fabric Testing Equipment
  • Application Fabric Testing
  • Color Blue
  • Voltage 220V
  • Condition New
  • Power 1-3kw
  • Power Source Electric
  • Warranty 1 Year
  • Automation Grade Semi Automatic
  • Country of Origin India
  • Brand Name Asian

We manufacture all type of fabric testing equipments.

Additional Information:

Payment Terms : T/T

Delivery Time : 10 Days

View Complete Details

Yarn Testing Equipments

We offer Yarn Testing Equipments.
The Wrap Reel is offered in both motor or hand operated models. The yarn is spread uniformly in a band of 20mm as the lea is formed. Up to 5 leas can be formed at one time. One of the arms of the reel can be docked to facilitate the removal of the leas from the reel. The number of turn is indicated on a counter. In case of motor operated wrap reel, a fractional hourse power motor controlled by a pre-set digital counter is provided to give the movement to the reel. An electromagnetic brake is provided to stop the movement of the reel almost instantaneously to reduce the chances of over travel.
View Complete Details

Rockwell Hardness Tester

Asian make Rockwell Hardness Tester Model MRS, MRS-150, MRB, MRB-250, and MSM are manually operated. These models are designed and developed after years of experience in this field. All the models are manufactured under strict quality control at all manufacturing stages. These models are suitable for testing hardness of metals and alloys of all kinds, hard or soft, whether flat or round etc. or of irregular shape. These Testers are simple in design and easy to operate, still yet quite sensitive and accurate. Various Models from the wide range are available for Institutes, Quality Control Laboratories, Tool-Rooms, Heat Treatment Dept, R & D Laboratories, etc.



TECHNICAL SPECIFICATION



  • Maximum Test Height: 255 mm

  • Depth of Throat: 135 mm

  • Maximum depth of screw below base: 215 mm

  • Dimensions of Machine: Base (Approx) 150 x 425 mm, Height (Approx) 660 mm

  • Weight (Approx): 67 kg

  • Power Supply: 220 V, 50 Hz, Single Phase A.C.(3 Wire System)

  • Max. Test Height: 295 mm

  • Depth of throat: 148 mm






OTHER DETAILS



  • These models strictly conform to IS: 1586-2000

  • BS: 891 Part 1 & 2 for Rockwell & Rockwell Superficial Test

  • IS: 2281 - 2005, ASTM - E-10 for Brinell Test




View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Aslam Islam (Asian Test Equipments)
  • F-49, Massori Gulawthi Road, UPSIDC Industrial Area,, Hapur, Uttar Pradesh - 201015
  • Share us via
Manufacturer of Testing Equipment from Hapur, Uttar Pradesh by Asian Test Equipments
Post Buy Requirement
AT
Hapur, Uttar Pradesh, India
gstGST : 09AAJFA0836D1ZR Add Review

Testing Equipment

Crump Flex Tester

1.25 Lakh /Piece Get Latest Price
  • Min. Order (MOQ) 1 Piece(s)
Used for flexing properties of coated fabrics. It is motor operated to compress and twist the sample at a time.
View Complete Details

Pneumatic Bursting Strength Tester

  • Min. Order (MOQ) 1
  • Type Bursting Strength Tester
  • Color Grey
  • Voltage 220V
  • Condition New
  • Power 1-3kw
  • Driven Type Electric
  • Warranty 1year
  • Certificate ISO 9001:2015
  • Weigth 60-80kg
  • Automation Grade Semi Automatic
  • Country of Origin India
  • Paper Packaging Industries Testing Equipment Coefficient Friction Testers
  • Pneumatic Bursting Strength Tester Paper Thickness Gauge
  • Humidity Chamber Analog Bursting Strength Tester
  • Bursting Strength Tester Cobb Tester
  • Folding Endurance Tester Round Cutter
  • Elemdrorf Tearing Strength Tester GSM Balance
  • Box Compression Tester Digital Bursting Strength Tester
  • Computerized Bursting Strength Tester Stiffness Tester 

The ASIAN Pneumatic Bursting Strength Tester is designed to find bursting strength of fabric/ leather/ paper/paperboard & corrugated box. A test specimen is held between two annular clamps under sufficient pressure to minimize slippage. The upper clamping surface which is in contact with the test specimens has continuous spiral grooves. A circular diaphragm of pure gum rubber is clamped between the lower clamping plate & pressure cylinder so that before the diaphragm is stretched by pressure underneath it the center of its upper surface is below the clamping surface. The equipment is fitted with a motor driven cam mechanism, which increases fluid displacement on the lower side of the diaphragm at a specified rate. The equipment is fitted with an arrangement, which automatically brings down the pressure and stops the motor on completion of the test cycle. A maximum reading type pressure gauge gives the bursting pressure. The equipment is ruggedly designed to give a long & trouble free life. The components are brighter chrome plated or painted in metallic paint to give the tester an aesthetic appearance. Digital type pressure gauge type instruments are also available. Digital type pressure gauge with pneumatic clamping model also available.










HomePaper Packaging Industries Testing Equipment Pneumatic Bursting Strength Tester













Pneumatic Bursting Strength Tester

The ASIAN Pneumatic Bursting Strength Tester is designed to find bursting strength of fabric/ leather/ paper/paperboard & corrugated box. A test specimen is held between two annular clamps under sufficient pressure to minimize slippage. The upper clamping surface which is in contact with the test specimens has continuous spiral grooves. A circular diaphragm of pure gum rubber is clamped between the lower clamping plate & pressure cylinder so that before the diaphragm is stretched by pressure underneath it the center of its upper surface is below the clamping surface. The equipment is fitted with a motor driven cam mechanism, which increases fluid displacement on the lower side of the diaphragm at a specified rate. The equipment is fitted with an arrangement, which automatically brings down the pressure and stops the motor on completion of the test cycle. A maximum reading type pressure gauge gives the bursting pressure. The equipment is ruggedly designed to give a long & trouble free life. The components are brighter chrome plated or painted in metallic paint to give the tester an aesthetic appearance. Digital type pressure gauge type instruments are also available. Digital type pressure gauge with pneumatic clamping model also available.





















Yes I am Interested






Additional Information:

Payment Terms : T/T

Delivery Time : 10 Days

Product Range

Paper Packaging Industries Testing Equipment Plastic Testing Equipment Fabric Testing Equipment
Yarn Testing Equipment Footwear Testing Equipment Leather Testing Equipment
Rubber Testing Equipment Coated Fabric Testing Equipment Foam Testing Equipment
Tensile Testing Machine Metal Testing Machines Automobile Testing Machines
Wood Testing Equipments Computerized Universal Testing Machine Electrical Test Equipments
Cone Calorimeter  
View Complete Details

Computerized Bursting Strength Tester

  • Min. Order (MOQ) 1
  • Type Bursting Strength Tester
  • Color Grey
  • Voltage 220V
  • Condition New
  • Power 1-3kw
  • Driven Type Electric
  • Warranty 1year
  • Certificate ISO 9001-2015
  • Weigth 60-80kg
  • Automation Grade Semi Automatic
  • Country of Origin India
Computerized Bursting Strength Tester of any material such as fabric, leather, paper, paperboard & corrugated box etc. It's strength under multi-directional force and is defined, as the hydrostatic pressure required producing rapture of the material when pressure is applied at a controlled increasing rate through a rubber diaphragm.


Technical Specification:



  • Capacity: 35kg /cm2

  • Opening in upper clam: 30.5 mm diameter

  • Opening in lower clamp: 38.1 mm diameter

  • Rate of fluid displacement: 95 cc/ minute

  • Test fluid: Glycerin

  • Gear Box: Worm reduction type

  • Power required: 220V AC, 500 W, 50 Hz single phase

  • Phase : Single

  • Watt : 500W

  • Frequency : 50 HzComputerized Bursting Strength Tester of any material such as fabric, leather, paper, paperboard & corrugated box etc. It's strength under multi-directional force and is defined, as the hydrostatic pressure required producing rapture of the material when pressure is applied at a controlled increasing rate through a rubber diaphragm.

    Technical Specification:



    • Capacity: 35kg /cm2

    • Opening in upper clam: 30.5 mm diameter

    • Opening in lower clamp: 38.1 mm diameter

    • Rate of fluid displacement: 95 cc/ minute

    • Test fluid: Glycerin

    • Gear Box: Worm reduction type

    • Power required: 220V AC, 500 W, 50 Hz single phase

    • Phase : Single

    • Watt : 500W

    • Frequency : 50 HzComputerized Bursting Strength Tester of any material such as fabric, leather, paper, paperboard & corrugated box etc. It's strength under multi-directional force and is defined, as the hydrostatic pressure required producing rapture of the material when pressure is applied at a controlled increasing rate through a rubber diaphragm.

      Technical Specification:



      • Capacity: 35kg /cm2

      • Opening in upper clam: 30.5 mm diameter

      • Opening in lower clamp: 38.1 mm diameter

      • Rate of fluid displacement: 95 cc/ minute

      • Test fluid: Glycerin

      • Gear Box: Worm reduction type

      • Power required: 220V AC, 500 W, 50 Hz single phase

      • Phase : Single

      • Watt : 500W

      • Frequency : 50 Hz








Additional Information:

Payment Terms : L/C, T/T

Delivery Time : 20 Days

Paper Packaging Industries Testing Equipment
Coefficient Friction Testers Pneumatic Bursting Strength Tester Paper Thickness Gauge
Humidity Chamber Analog Bursting Strength Tester Bursting Strength Tester
Cobb Tester Folding Endurance Tester Round Cutter
Elemdrorf Tearing Strength Tester GSM Balance Box Compression Tester
Digital Bursting Strength Tester Computerized Bursting Strength Tester Stiffness Tester
View Complete Details

Leather Testing Equipments

We manufacture all type of Leather testing equipments.
View Complete Details

Tensile Strength Tester

1 Lakh - 10 Lakh /Piece Get Latest Price
  • Min. Order (MOQ) 1 Piece(s)
  • Type Tensile Strength Tester
  • Application Strength Testing
  • Color Blue
  • Voltage 220V
  • Condition New
  • Power 1-3kw
  • Driven Type Electric
  • Warranty 1year
  • Certification ISO 9001:2015
  • Weigth 80-100kg
  • Automation Grade Semi Automatic
  • Country of Origin India
  • Brand Name Asian
  • Certification ISO:9001-2015


tensile strength tester and elongation are the two prime characteristics of most of the raw materials, whether they are metals or non-metals such as foam, rubber, textiles, plastic, paper or finished products such as rods, wires, ropes, yarns, belts etcetera. These properties very often play the major role in determining the suitability of any raw material for any specific application. It is, therefore, of utmost importance to determine these characteristics accurately, conveniently, and quickly.



technical specification



  • range: 250 kg with 0.1 kg least count digital display

  • elongations: up to 900 mm x 0.1 mm least count digital display

  • traverse speed: 300 & 500 mm/min

  • motor: 1/2 hp, 1425 rpm, 220 v ac single phase induction motor

  • power required: 220 v ac, 500 w, single phase

  • capacity (kilogram) : 500 kg

  • least count (gram) : 100

  • test speed (mm/minute) : 300mm/min and 500 mm/min

  • resolution (millimetre) : 0.1 mm

  • display type : digital




Additional Information:

Payment Terms : L/C, T/T

Delivery Time : 15 Days

View Complete Details

Bursting Strength Tester

90,000 - 3 Lakh /Unit Get Latest Price
  • Min. Order (MOQ) 1 Piece(s)
  • Country of Origin India
  • Type Bursting Strength Tester
  • Application Strength Testing, Industrial Use
  • Color Multi
  • Voltage 220V
  • Condition New
  • Power 1-3kw, Electrical/Electronics
  • Driven Type Electric
  • Warranty 1year
  • Certificate ISO9001:2015
  • Weigth 60-80kg
  • Automation Grade Semi Automatic
  • Brand Name Asian
  • Standard ISO

Bursting Strength Tester of any material such as fabric, leather, paper, paperboard & corrugated box etc. It's strength under multi-directional force and is defined, as the hydrostatic pressure required producing rapture of the material when pressure is applied at a controlled increasing rate through a rubber diaphragm.


Technical Specification:



  • Opening in upper clamp: 30.5 mm diameter

  • Opening in lower clamp: 38.1 mm diameter

  • Rate of fluid displacement: 95 cc/ minute

  • Test fluid: Glycerin

  • Gear Box: Worm reduction type

  • Power required: 220 V AC, 500 W, 50 Hz single phase


Additional Information:

Payment Terms : T/T

Delivery Time : 10 Days

Paper Packaging Industries Testing Equipment
Coefficient Friction Testers Pneumatic Bursting Strength Tester Paper Thickness Gauge
Humidity Chamber Analog Bursting Strength Tester Bursting Strength Tester
Cobb Tester Folding Endurance Tester Round Cutter
Elemdrorf Tearing Strength Tester GSM Balance Box Compression Tester
Digital Bursting Strength Tester Computerized Bursting Strength Tester Stiffness Tester
View Complete Details

Limited Oxygen Index Apparatus

  • Min. Order (MOQ) 1
  • Type Testing Apparatus
  • Certification ISO 9001:2008
  • Application Testing Use
  • Weight 30-40kg
  • Color Multi
  • Voltage 220V
  • Condition New
  • Power 100-200W
  • Driven Type Electric
  • Warranty 1yrs
  • Automation Grade Semi Automatic
  • Country of Origin India
  • Brand Name Asian
  • Certificate ISO 9001-2015

ASIAN Limited Oxygen Index Apparatus consists of a test chimney made of borosilicate glass suppurated by the metallic base and hook with the help of the metallic pillar. The mixture of nitrogen and oxygen is released from the bottom of the tube. The tube is filled with glass beads for mixing and evenly distributing the gas mixture. The specimen holder, which holds the test specimen, made of U shape and fixed at the center of the chimney. There is the porous screen mounted below the level of the specimen holder, to prevent falling combustion debris from fouling the gas entry and distribution paths. There is a digital temperature indicator cum controller with a thermocouple for the measurement. A copper tube with a suitable orifice for pilot flame is provided for igniting the specimen by inserting it from the top of the test column. The digital preset timer and buzzer are also mounted in the instrument. Two rotameter with needle valve is provided to control and measure oxygen and nitrogen flow in the test chimney. A timer for indicating the time of burning with a reset switch. The rotameter, temperature controller, timer are fitted in the sheet panel. The test chimney is fitted separately on the metallic platform. Gasses, gas cylinders and its fittings are not provided with the equipment and have to be arranged by the purchaser.



TECHNICAL SPECIFICATION



  • Dimensions of test column: 75 mm inside diameter x 450 mm long

  • Rota meters: 0.625 to 6.25 liter/minute for oxygen & 1.05 to 10.5 liter/minute for nitrogen

  • Temperature indicator: Up to 199 degree C x 1 degree C

  • Timer: Timer Up to 999 seconds x 1 second




Additional Information:

Payment Terms : L/C, T/T

Delivery Time : 15 Days

Plastic Testing Equipment
Limited Oxygen Index Apparatus Temperature Of Deflection Under Load Apparatus Smoke Density Tester
Smoke Visibility Tester Melt Flow Index Tester Apparatus for Temperature Of Deflection Under Load
Pendulum Impact Testing Machines Asian Heat Deflection Tester Heat Deflection Temperature Tester
Plastic Testing Equipment Toxicity Chamber Melt Flow Indexer Testing ApparatusC
View Complete Details

Smoke Density Tester

  • Min. Order (MOQ) 1
  • Material Aluminium
  • Application Laboratory
  • Weight 20kg
  • Feature Best Quality, Easy To Use
  • Voltage 220V
  • Finishing Power Coated
  • Power Supply Electric
  • Phase Single Phase
  • Warranty 1 Year
  • Country of Origin India

ASIAN Smoke Density Tester is constructed using 14 gauge aluminum box, which is hinged a heat resistant glass glazed door. This box is mounted on the base which houses the controls. Dependent upon the materials tested, the metal may require protection from corrosion. The chamber is sealed except for 25 by 30mm (1by 9in.) openings on the four sides of the bottom of the chamber. A liters/min specified capacity blower is mounted on one side of the chamber. The inlet duct to the bowler is equipped with a close fitting damper. The outlet of the bowler will be connected through a duct to the laboratory exhaust system. The two sides adjacent to the door are fitted with 70mm (2/3in) diameter smoke tight glazed areas entered 480mm (19/4 in.) above the base. At these locations and outside the chamber, boxes containing the optical equipment and additional controls are attached. A removable white plastic plate is attached to the back of the chamber. There is a clear area centered above the bottom of the chamber. Through which is seen an illuminated white on the red exit sign. The white background permits observations of the flame, smoke, and burning characteristics of the materials. The viewing of the exit sign helps to correlate visibility and measured values. The specimen holder is supported on a square gauge. Stainless steel wire cloth above the base and equidistant from all sides of the chamber. This screen is lying in a stainless steel bezel supported by a rod through the right side of the chamber. From the same rod similar bezel is located below and it supports a square of asbestos paper which catches any particles that may drip from the specimen during the test. By rotating the specimen holder rod, the burning specimen can be quenched in a shallow pan of water positioned below the specimen holder.


The specimen is ignited by a propane flame from a burner operating at a specified pressure. The fuel is mixed with air which has been propelled through the burner by the venturi effect of the propane as it passes through a small orifice. The burner is designed to provide adequate outside air. the burner is capable of being positioned quickly under the specimen so that the exit of the burner falls on a line passing through a point 8mm above the base at one corner of the chamber extending diagonally across the chamber and sloping upwards at 45 deg with the base. There is a control panel which controls and indicate the supply of gas. Lux of the light measurement system of the mounted light source also mounted in the instrument. There is a digital timer mounted in the instrument to indicate the time.


Additional Information:

Payment Terms : L/C, T/T

Delivery Time : 15 days

Plastic Testing Equipment
Limited Oxygen Index Apparatus Temperature Of Deflection Under Load Apparatus Smoke Density Tester
Smoke Visibility Tester Melt Flow Index Tester Apparatus for Temperature Of Deflection Under Load
Pendulum Impact Testing Machines Asian Heat Deflection Tester Heat Deflection Temperature Tester
Plastic Testing Equipment Toxicity Chamber Melt Flow Indexer Testing Apparatus
View Complete Details

Fogging Tester

  • Min. Order (MOQ) 1
  • Type Automobile test
  • Certification ISO 9001:2008 Certified
  • Application Laboratory
  • Color Multicolor
  • Feature Easy To Use, Superior Finish
  • Condition New
  • Frequency 50Hz
  • Automatic Grade Semi Automatic
  • Power Source Electric
  • Operating Current Single Phase
  • Warrenty 1year
  • Brand Name Asian

The Fogging Tester is specially designed equipment for testing the fogging characteristics or VOCs of leather, plastics, vinyl and textiles for automotive, aerospace and other transportation vehicles.This fogging tester comprises of following equipment.





  • Thermostatically Controlled Bath: Available with all safety devices for over- heating, this is designed to operate at up to 130C. All the parameters like bath capacity, circulation system and heating system work in coordination as to control the temperature within+0.5C throughout the bath. A slow and uniform speed is maintaining for the agitation of the bath.

  • Note: There is a centrifugal pump at the bottom of some of the heaters and circulators that enable the pumping of liquid at high speed around the bath. Passing liquid in the beakers have different speeds and this will cause differentiation in the temperatures of different beakers. The distance between the bath fluid and lower surface of the glass plate should be 60+2 mm.

  • Cooling Plates: Hollow in structure, these cooling plates are made from rust-proof metals with aluminum on the side facing the glass plate. These are specially designed for keeping the glass plates cool. The cooling water flows through a whole of the plate with two connections. A minimum weight of 1kg should be maintained in the cooling plate filled with to overcome the buoyancy of the beaker in the bath. For each different beaker, a separate cooling plate is used. Designing of the cooling plates and water thermostat is done in such a way that the mean temperature of water remains at 21C and the temperature difference between the inlet and outlet does not exceed 1C.

  • Flat bottomed beakers: These are made from heat-resistant glass

  • Metal rings: Made from rust proof steel, these rings are used to keep the test pieces flat.

  • Sealing Rings: These rings are L- shaped or circular, made from silicone or fluoro rubber.

  • Float-glass plates: These plates are available in residential or windshield window quality for condensation of the fogging. Available in the tin and not- tin finish, these glass plates have reflectometer values within+2% units.

  • Note: Identification of the tin and non-tin surfaces of the glass plates can be done by viewing in a darkened room under a UV light at 254 nm wavelength. When exposed to UV light, the tin surface of the plate will fluoresce. Filter paper

  • Aluminum foil discs: These discs are stored in a dedicator for avoiding condensation and contamination

  • Reflectometer: also known as gloss meter

  • Spacer: This type of spacer is specially installed during reflectometer measurements to prevent contact with the condensate on the glass plate. These are made from high-grade materials such as paper or plastic with a circular hole for the measurements.

  • Dishwasher

  • Balance

  • Polyethylene gloves

  • Desiccators: These are available with suitable drying material






TECHNICAL SPECIFICATIONS



  • External diameter: 80mm

  • Internal diameter: 74mm

  • Height: 10mm

  • Mass: 55+1g














Additional Information:

Payment Terms : L/C, T/T

Delivery Time : 30 days

More Range of Automobile Testing Machines
 

Automobile Testing Machines
Compressibility And Recovery Tester Fogging Tester Salt Spray Chamber
Coating Thickness Gauge Horizontal Flammability Tester Leakage Testing Machine for Separator Set Fuel Filler
Leakage Testing Machine for Fuel Pipe Leakage Testing Machine for Head Lamps

View Complete Details

Footwear Testing Equipments

We manufacture all type footwear testing equipments.
View Complete Details

Box Compression Tester

2 Lakh /Piece Get Latest Price
  • Min. Order (MOQ) 1 Piece(s)
  • Brand Name Asian
  • Certification ISO
  • Application Carton Box
  • Power electrical/electronics operated
The Asian Box Compression Tester made of a set of plates one is attached to the load measuring arrangement and the other is movable plate which is move with the help of motor, gearbox, and screw and nut arrangement, the movable plate have the facility of over travel and under travel. The load measuring arrangement is digital type. The box of which the compression strength is to be determined is placed on the lower plate, due to the motion of the movable plate the box is compressed and the compression load is directly read out on the digital indicator on the panel. The deflection of the box also measured with the help of the digital deflection indicator.
View Complete Details

Digital Compression Tester

  • Brand Name Asian
  • Application Industrial use
  • Power electrical/electronics operated
  • Certification Yes
Different size and capacity available range from 50 kg to 5000 kgf. and the plateform available 100mm X100 mm to 1500 mm X 1500 mm
View Complete Details

Heat Release Rate Tester

25 Lakh /Piece Get Latest Price
  • Min. Order (MOQ) 1 Piece(s)
Asian heat release tester
the test method is based on the observation that, generally, the net heat of combustion is proportional to the amount of oxygen required for combustion. The relationship is that approximately 13, 1 103 kj of heat are released per kilogram of oxygen consumed. Specimens in the test are burned under ambient air conditions, while being subjected to a predetermined external irradiance within the range of 0 kwm2 to 75 kw m2 and measurements are made of oxygen concentrations and exhaust gas flow rates.
the apparatus is made of following parts,

cone-shaped radiant electrical heater
radiation shield
irradiance control
weighing device
specimen holder
retainer frame
exhaust gas system with flow measuring instrumentation
gas sampling apparatus
ignition circuit
ignition timer
oxygen analyser
heat flux meters
calibration burner
data collection and analysis system
side screens
smoke system thermocouple

technical data:
cone-shaped radiant electrical heater: 5 000 w at 230 vac
irradiance control: pid type upto 10000c
weighing device: 1000 gm x 0.1 gm least count
ignition circuit :spark plug powered from a 10 kv transformer
oxygen analyser: paramagnetic type, with a range of at least 0 % oxygen to 25 % oxygen
heat flux meters:upto (100 10) kw m2
calibration burner: square orifice with an area of (500 100) mm2
data collection and analysis system: ni software

related standard
bs iso 5660-1:2015
iso 5660-1:2015(e)
View Complete Details

Dart Impact Tester

65,000 /Piece Get Latest Price
  • Min. Order (MOQ) 1 Piece(s)
  • Brand Name Asian
  • Power Electrical/Electronics
  • Application Industrial Lab
  • Application Quality control of plastic film
The asian dart impact tester consists of the following parts:

1. specimen clamp a two piece annular specified clam with facility to vaccume clamping.

2. electromagnet for supporting and release the dart assembly.

3. height adjustment system means to provide the positioning of the dart at specified height.

4. cushioning and shielding device to protect

5. personal and to avoid damaging the impinging surface of dart.
View Complete Details

Dry Sand Abrasion Tester

  • Min. Order (MOQ) 1
  • Type Digital Tester
  • Certification ISO 9001:2008 Certified
  • Application Industrial Use
  • Color Multicolor
  • Feature Easy To Use
  • Condition New
  • Frequency 50 Hz
  • Automatic Grade Semi Automatic
  • Power Source Electric
  • Operating Current Single Phase
  • Warrenty 1year
  • Temperature Capacity Medium Temperature
  • Puncture Voltage 220V
  • Brand Name Asian
  • Minimum Orde Quantity 1 Piece
  • Colour Powder coating
  • Grade Semi-Automatic
  • Type of Testing Machines Metal

TheDRY SAND ABRASION TEST RIGhas been designed as per ASTM G 65 specifications. This test uses a rubber-rimmed wheel as the bed for silica abrasive that is fed from a hopper by a nozzle between the sample and the wheel. The sample is pressed into the wheel by a dead weight loaded lever. The test is run for a set number of revolutions with automatic cutoff and the wear is measured by measuring the volume of material lost through mass loss and density measurements. The flow of sand into the gap between the surfaces is controlled by the geometry of the nozzle that must be very carefully defined to obtain the required sand flow rate. The abrasive only passes through the wear interface once and is thrown away at the end of the test. The uniform loading and uniform flow of abrasive into the gap between wheel and the specimen under controlled conditions give consistent results. The properties of the rubber lining of the wheel also have a major effect on the results and need to be carefully controlled.


Additional Information :



  • Item Code:ATEDrySand

  • Pay Mode Terms:L/C (Letter of Credit), T/T (Bank Transfer), D/P, D/A

  • Port of Dispatch:New Delhi

  • Production Capacity:5

  • Delivery Time:30 Days


Additional Information:

Payment Terms : L/C, T/T

View Complete Details

Horizontal Flammability Tester

  • Min. Order (MOQ) -4
  • Type Flammability Testers
  • Certification ISO 9001:2008 Certified
  • Application Fabric Flammability Uses, Industrial Use
  • Color Grey
  • Feature Easy To Use, Superior Finish
  • Condition New
  • Frequency 50Hz
  • Automatic Grade Semi Automatic
  • Power Source Electric
  • Operating Current Single Phase
  • Warrenty 1year
  • Temperature Capacity NA
  • Country of Origin India
  • Brand Name Asian
  • Power 220VAC

The Horizontal Flammability Tester for the interior of a motor vehicle consists of a stainless steel box. The box has four slots of specified width on the upper part of all sides and the bottom plate has 10holes of specified diameter. The box has an access window of a heat resistant glass plate on the front and a door that has a slot that allows U-shaped clamp enter the box, and a hole for passing a hose from a gas burner, on the side. The box is fitted with four legs and the bottom part raised by 10mm. the clamps made of metal of U-shape of a specified dimension. A Bunsen burner of specified dimension is fitted on the bottom of the stainless steel box. The length of flame control with the help of the needle valve. The flame of the burner is automatically controlled with the help digital preset timer and synchronous motor.



TECHNICAL SPECIFICATIONS



  • Size of chamber: 385 mm Wide, 204 mm Deep, 356 mm Height

  • Size of slit on the top: 12.7 mm

  • Inside diameter of burner: 9.5+0.5 mm

  • JASO M 313-83, FMVSS302, ASTM D5132

  • Stress Relaxation Testing Machine As per DIN 52913 & IS 2712: 1998

  • Gas Sealability Testing Machine As per ASTM F37 B

  • Creep Relaxation Testing Machine As per ASTM F38 B




Additional Information:

Payment Terms : T/T

Delivery Time : 15 days

View Complete Details

Compressibility Recovery Tester

  • Min. Order (MOQ) 1 Piece(s)
  • Type compressibility and recovery tester for automobile seal material
  • Certification ISO 9001:2008 Certified
  • Application Laboratory
  • Color Multicolor
  • Feature Easy To Use
  • Condition New
  • Frequency 50Hz
  • Automatic Grade Fully Automatic
  • Power Source Electric
  • Operating Current Single Phase
  • Warrenty 1year
  • Temperature Capacity Medium Temperature
  • Puncture Voltage 220V
  • Country of Origin India

We manufacturer Compressibility and Recovery Tester as per ASTM F 36



Technical Specification:



  • Area of specimen to be tested: 40 mm2

  • Diameter of test specimen: 22.6 mm

  • Diameter of indenter: 25 mm

  • Range of thickness measurement: 0 - 19 mm x 0.01 mm

  • Initial load on test specimen: 7 kPa (286 g)

  • Final load on test specimen: 2800 kPa (114 kg)

  • Range of spring dynamometer: 150 kg





Additional Information:

Payment Terms : L/C, T/T

Delivery Time : 30 days

Automobile Testing Machines
Compressibility And Recovery Tester Fogging Tester Salt Spray Chamber
Coating Thickness Gauge Horizontal Flammability Tester Leakage Testing Machine for Separator Set Fuel Filler
Leakage Testing Machine for Fuel Pipe Leakage Testing Machine for Head Lamps
 

View Complete Details

Smoke Visibility Tester

100 - 2 Lakh /Piece Get Latest Price
  • Min. Order (MOQ) 1
  • Material Board
  • Application Laboratory
  • Weight 100
  • Feature Best Quality, Easy To Use
  • Voltage 220V
  • Capacity 0.5 cubic meter
  • Finishing Power Coated
  • Power Supply Electric
  • Phase Single Phase
  • Warranty 1 Year
  • Country of Origin India























Smoke Visibility Tester

Smoke Visibility Tester made of a plywood chamber inner side painted by heat proof paint the ceiling of the chamber have a hole which permits to hold light meter cell while testing. There is a hole in the bottom of the chamber, which is aligning to the ceiling hole. There is a clear glass bulb fitted to the bottom hole. The left-hand side of the chamber has a hole, an exhaust fan fitted to the left-hand side hole. The right-hand side has a hole which permits to flow air at the time of the exhaust of the smoke to the chamber. The front of the chamber has a hinged door, which has a clear glass window on the door. There are shutters on the left-hand side and the right-hand side hole of the chamber. The LUX of the bulb control with the help of an electronics regulator fitted in the panel of the instrument. The ceiling hole and the front glass window covered with the black curtain. The chamber fitted on the section stand. A LUX meter is supplied with the instrument for the measurement of the LUX of the light. There is an aluminum silicate and a stainless steel plate also supplied with the instrument. There is a stainless steel specimen frame tilted at 20?a to the vertical and have the provision to hold the specimen and there is provision to slide the specimen frame. There is a burner mounted on the bottom of the chamber at an angle of 45. A flow meter, pressure gauge and pressure regulator are fitted on the section frame for the adjustment of the supply of the gas. All the parts are painted or polished for the corrosion resistance long life. We will not supply any gas with the instrument.






















DownloadPDF



Additional Information:

Payment Terms : L/C, T/T

Delivery Time : 20 Days

View Complete Details

Melt Flow Index Tester

  • Min. Order (MOQ) 1
  • Type Melt Flow Index Tester
  • Material 50
  • Certification ISO 9001:2008 Certified
  • Color Grey
  • Feature Easy To Use, Superior Finish
  • Condition New
  • Automatic Grade Semi Automatic
  • Power Source Electric
  • Operating Current Single Phase
  • Warrenty 1year
  • Temperature Capacity High Temperature
  • Country of Origin India
  • Brand Name Asian
  • Actual Size 22 (W) x 17 (D) x 19 (H)
  • Desiccators Diameter 300 mm
  • Desiccators Polycarbonate Polycarbonate
  • Rating 5A 230 V
  • Single Phase Vacuum Level 22
  • Timer 5 minute (mechanical)
  • Body Stainless Steel

AsianMelt Flow Index Testerfor plastic measures the melt flow index of the plastic material. The system consists of a heated extruder tube, an interchangeable jet through which the material under test is extruded, and a piston with dead weights to apply the specified pressure on the material inside the extruder tube. The extruded tube is made from carbon steel and is heated by means of a Bend Heater, which surrounds its outer circumference. A PID controller is provided to indicate & control the temperature of the tube. The heater clogged with mineral wool insulation. The assembly is fixed on a rigid stand. The bottom of the tube is lagged with an insulation of PTFE to prevent sticking of the extrudate. The jet through with the extruder is pushed out is made from hardened and ground die steel. It is held at the bottom of the extruder tube. The piston made from silver steel relieved at the upper end is provided to push the extrudate out of the jet. The piston moves inside the cavity of the tube. A sleeve to provide to guide the relieved portion of the piston. The top of the piston carries a plate-form for keeping the load on. The plate-form is thermally insulated from the load. The extruder tube assembly is mounted on a metal box. A sheet metal control panel is mounted on the side of the equipment & houses the PID Controller, DIGITAL PRESET TIMER & other electronic components. Cleaning tools for tube cavity and jets & stoppers & cutter for the extrudate are also supplied with the equipment.


TECHNICAL SPECIFICATION



  • Desiccators Diameter: 300 mm

  • Rating: 5A 230V

  • Single Phase Vacuum Level: 22

  • Timer: 5 minute (mechanical)

  • Desiccators Polycarbonate: Polycarbonate

  • Body: Stainless Steel

  • Actual Size: 22 (W) x 17 (D) x 19 (H)



Additional Information:

Payment Terms : L/C, T/T

View Complete Details

Cantilever Tensile Tester

  • Min. Order (MOQ) -1
  • Type Tensile Testing Machine
  • Certification ISO 9001:2008
  • Weight 400-500kg
  • Color Blue
  • Voltage 220V
  • Condition New
  • Automatic Grade Semi Automatic
  • Power 3-6kw
  • Driven Type Electric
  • Warranty 1year
  • Country of Origin India
  • Brand Name Asian
  • Application Insulator testing
  • Minimum Order Quantity 1 Piece
  • Grade Semi-Automatic
  • Supply AC








HomeTensile Testing Machine Tensile Strength Tester













Tensile Strength Tester

Tensile Strength Tester and elongation are the two prime characteristics of most of the raw materials, whether they are metals or non-metals such as foam, rubber, textiles, plastic, paper or finished products such as rods, wires, ropes, yarns, belts etcetera. These properties very often play the major role in determining the suitability of any raw material for any specific application. It is, therefore, of utmost importance to determine these characteristics accurately, conveniently, and quickly.





















Yes I am Interested





TECHNICAL SPECIFICATION



  • Range: 250 Kg with 0.1 kg least count digital display

  • Elongations: Up to 900 mm X 0.1 mm least count digital display

  • Traverse Speed: 300 & 500 mm/min

  • Motor: 1/2 Hp, 1425 rpm, 220 V AC single phase induction motor

  • Power required: 220 V AC, 500 W, single phase

  • Capacity (Kilogram) : 500 kg

  • Least Count (Gram) : 100

  • Test speed (Mm/Minute) : 300mm/min and 500 mm/min

  • Resolution (Millimetre) : 0.1 mm

  • Display Type : Digital









Cantilever & Tensile Tester

Mechanical failing load tester for insulator(Cantilever & Tension)

Name :Mechanical failing load tester for insulator (Cantilever & Tension)
Other Name :Cantilever/Tension failing load tester for ceramic/polymeric/glass insulator

This Mechanical failing load tester is designed to do type test and sample test on high voltage electrical insulators, testing their mechanical performance of cantilever failing load and tensile failing load. More than one type of machine produced by Contune International Corp have function of tensile test, and surely there are a lot of other types of testing machine which have function of cantilever (bending) test. This machine combines the two function into one machine.

In vertical direction, this testing machine can do tensile test for ceramic disc insulators, polymeric suspension insulators, polymeric tension insulators and glass disc insulators. In horizontal direction, a stable moving device is applied for cantilever test of ceramic post insulators, pin insulator (porcelain), polymeric pin insulators and polymeric post insulators. The tester is controlled by computer software. The testing strength , time and testing procedure can be controlled, which make it available to conform testing procedure and acceptance criteria in IEC standard(60383.1). This software has clear view of entire test process, curve and number indicating all necessary test data live, result of which can be saved and printed, very convenient to operate.

Standard Applied :IEC 60383.1-1993 mod, GB/T 1001.1-2003, GB/T 19443-2004 "Insulators for overhead lines with a nominal voltage above 1000V"

Additional Information:

Payment Terms : L/C, T/T

Delivery Time : 40 Days

View Complete Details

Wood Testing Equipment

  • Min. Order (MOQ) 1
  • Type Wood Testing Equipment
  • Application Wood Testing
  • Color Blue
  • Voltage 220V
  • Condition New
  • Power 1-3kw
  • Power Source Electric
  • Warranty 1 Year
  • Automation Grade Semi Automatic
  • Country of Origin India

In the market, we present a highly functional range of Wood Testing Equipments with excellent accuracy. These testing machines offer a complete spectrum of testing jobs in various industries like wooden, automotive, aerospace, paints, aviation, and many others. We have in our universal testing machines for determining the shear strength, compression strength and elongation of varied materials. Then, there is humidity chamber for maintaining the standing temperature and humidity level to get accurate properties of the test specimen. Fore testing the gloss and brightness of any objects surface, we have gloss meter. We have all the latest versions of this testing equipment, all in confirmation with the international standards of ASTM D412, D395, D429, GB 9754, IS 3400 and ISO 2813.

Specifications:



  • Model: ATE/UTM/60C

  • Straining/ piston speeds (mm/mm) (at no load): 0-150

  • Resolution of piston movement (mm): 0.1

  • Clearance for tensile at fully descended working piston (mm): 50-700

  • Clearance for compression test at fully descended working piston (mm) Clearance between columns (mm): 0-700, 500



Connected Load:



  • HP: 3

  • V: 400-440

  • Phase: 3



Dimensions:



  • LXWXH in (Inch): 72 x 30 x 82 (approx.)

  • Net Weight in (kg): 1700 (approx.)

  • Gross Weight in (kg): 2000 (approx.)



Standard Accessories:



  • Clamping jaws for round specimen diameter (mm): 10-25, 25-40 & 40-55

  • "Clamping jaws for flat specimens thickness (mm) Width: 0-15, 15-30, 70



For Compression Test:



  • Pair of compression plates of diameter (mm): 120



For Flexural Test:



  • Table with adjustable rollers, width of rollers (mm): 160

  • Diameter of the rollers (mm): 50

  • Max. the clearance between supports: 600

  • Radius of punch tops (mm): 16, 22


Additional Information:

Payment Terms : L/C, T/T

Delivery Time : 15 Days

View Complete Details

Spring Tester

  • Min. Order (MOQ) 1
  • Type Spring Tester
  • Certification ISO 9001:2008 Certified
  • Application Spring Testing
  • Color Multicolor
  • Feature Easy To Use
  • Condition New
  • Frequency 50 Hz
  • Automatic Grade Semi Automatic
  • Power Source Electric
  • Operating Current Single Phase
  • Warrenty 1year
  • Temperature Capacity Medium Temperature
  • Puncture Voltage 220V
  • Country of Origin India
  • Brand Name Asian
  • Power 220 VAC

Our company has brought a revolution in the spring and wire forming industry with advanced Spring Testers. With this machine, we provide cutting edge and non-destructive testing solutions to several industries. This is specifically developed to support industries continual efforts in manufacturing the better product at a lower cost. The offered testers are used for geometrical inspection of 2D and 3D wire formed parts.


Technical Specification:



  • Capacity: 100kg

  • Accuracy: 0.01kg

  • Least count for load: 0.1mm

  • Diameter of spring: Max. 100 mm

  • Length of spring: Max: 300 mm






Features:



  • Compression plate set for compression springs

  • Attachment for the tension springs

  • Motor operated

  • Worm reduction gearbox

  • Motor, screw mechanism and worm reduction gear box ensure smooth movement

  • Protection from over travel

  • Digital display of load and deflection






Application:



  • Spring and wire forming industry

  • Automotive industry

  • Plastic industry

  • Military industry

  • Aerospace industry


Additional Information:

Payment Terms : L/C, T/T

View Complete Details

Analog Bursting Strength Tester

  • Min. Order (MOQ) 1
  • Type Bursting Strength Tester
  • Application Strength Testing
  • Color Multi
  • Voltage 220V
  • Condition New
  • Power 1-3kw
  • Driven Type Electric
  • Warranty 1year
  • Certificate ISO 9001 :2015
  • Weigth 60-80kg
  • Automation Grade Semi Automatic
  • Country of Origin India

The ASIAN Analog Bursting Strength Tester is designed to find bursting strength of fabric/ leather/ paper/paperboard & corrugated box. A test specimen is held between two annular clamps under sufficient pressure to minimize slippage. The upper clamping surface which is in contact with the test specimens has continuous spiral grooves. A circular diaphragm of pure gum rubber is clamped between the lower clamping plate & pressure cylinder so that before the diaphragm is stretched by pressure underneath it the center of its upper surface. The equipment is fitted with a motor driven cam mechanism, which increases fluid displacement on the lower side of the diaphragm at a specified rate. The equipment is fitted with an arrangement, which automatically brings down the pressure and stops the motor on completion of the test cycle. A maximum reading type pressure gauge gives the bursting pressure. The equipment is ruggedly designed to give a long & trouble free life. The components are brighter chrome plated or painted in metallic paint to give the tester an aesthetic appearance. Digital type pressure gauge type instruments are also available. Digital type pressure gauge with pneumatic clamping model also available.


Technical Specification:



  • Opening in upper clamp: 30.5 mm diameter

  • Opening in lower clamp: 38.1 mm diameter

  • Rate of fluid displacement: 95 cc/ minute

  • Test fluid: Glycerin

  • Capacity: 0 to 50 kg/cm2x 0.1 kg/cm2least count


Additional Information:

Payment Terms : T/T

Paper Packaging Industries Testing Equipment
Coefficient Friction Testers Pneumatic Bursting Strength Tester Paper Thickness Gauge
Humidity Chamber Analog Bursting Strength Tester Bursting Strength Tester
Cobb Tester Folding Endurance Tester Round Cutter
Elemdrorf Tearing Strength Tester GSM Balance Box Compression Tester
Digital Bursting Strength Tester Computerized Bursting Strength Tester Stiffness Tester
View Complete Details

Fabric Testing Equipments

1.12 Lakh - 1.85 Lakh /Piece Get Latest Price
  • Min. Order (MOQ) 1 Piece
  • Type Fabric Testing Equipment
  • Application Fabric Testing
  • Color Blue
  • Voltage 220V
  • Condition New
  • Power 1-3kw
  • Power Source Electric
  • Warranty 1 Year
  • Automation Grade Semi Automatic
  • Country of Origin India
  • Brand Name Asian

We manufacture all type of fabric testing equipments.

Additional Information:

Payment Terms : T/T

Delivery Time : 10 Days

View Complete Details

Yarn Testing Equipments

We offer Yarn Testing Equipments.
The Wrap Reel is offered in both motor or hand operated models. The yarn is spread uniformly in a band of 20mm as the lea is formed. Up to 5 leas can be formed at one time. One of the arms of the reel can be docked to facilitate the removal of the leas from the reel. The number of turn is indicated on a counter. In case of motor operated wrap reel, a fractional hourse power motor controlled by a pre-set digital counter is provided to give the movement to the reel. An electromagnetic brake is provided to stop the movement of the reel almost instantaneously to reduce the chances of over travel.
View Complete Details

Rockwell Hardness Tester

Asian make Rockwell Hardness Tester Model MRS, MRS-150, MRB, MRB-250, and MSM are manually operated. These models are designed and developed after years of experience in this field. All the models are manufactured under strict quality control at all manufacturing stages. These models are suitable for testing hardness of metals and alloys of all kinds, hard or soft, whether flat or round etc. or of irregular shape. These Testers are simple in design and easy to operate, still yet quite sensitive and accurate. Various Models from the wide range are available for Institutes, Quality Control Laboratories, Tool-Rooms, Heat Treatment Dept, R & D Laboratories, etc.



TECHNICAL SPECIFICATION



  • Maximum Test Height: 255 mm

  • Depth of Throat: 135 mm

  • Maximum depth of screw below base: 215 mm

  • Dimensions of Machine: Base (Approx) 150 x 425 mm, Height (Approx) 660 mm

  • Weight (Approx): 67 kg

  • Power Supply: 220 V, 50 Hz, Single Phase A.C.(3 Wire System)

  • Max. Test Height: 295 mm

  • Depth of throat: 148 mm






OTHER DETAILS



  • These models strictly conform to IS: 1586-2000

  • BS: 891 Part 1 & 2 for Rockwell & Rockwell Superficial Test

  • IS: 2281 - 2005, ASTM - E-10 for Brinell Test




View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Aslam Islam (Asian Test Equipments)
  • F-49, Massori Gulawthi Road, UPSIDC Industrial Area,, Hapur, Uttar Pradesh - 201015
  • Share us via