Listing ID #198658
Company Information
Ask for more detail from the seller
Contact SupplierAs process chemistries became more complicated, the wastewaters generated also are becoming more complex and more difficult to treat. At the same time, regulations for discharge to sewer and surface water are becoming more stringent. Most wastewaters, such as waste coolant, have suspended solids in them made up of dirt, metal particles, and other contaminants including oils and chemicals. Because oils and metals react at different pH levels, separate systems for their removal are needed calling for many tanks and large floor space. This is where KleerSEP Emulsion Cracking Systems score.
Technology:
Using step-by-step separation process , KleerSEP combines the techniques of straining out of bulk solids, coalescing to remove free floating oils, adsorption of microscopic oil, organic matter and smell by carbon treatment, flocculation of oily sludge out of waste water, dewatering of sludge, oxidizing residual oil and dissolved solids and also bacterial disinfection by ozonation, and polishing of output water by micro fiber filter to obtain clear water.
Advantages:
It is a vertical “high-rise” system needing minimal floor space. Low TCO (Total Cost of Ownership). Easy to operate and maintain. No fine adjustments such as pH and constant monitoring of process .Handles shock loads with ease due to step-by-step contamination elimination process assuring consistent output quality. Better reliability. Less than 5ppm oil and 2.5mg/L of TSS in output water. Totally disinfected and clear water fit for reuse/disposal.