Post Buy Requirement
Carlstahl Craftsman Enterprises Private Limited
Coimbatore, Tamil Nadu, India
Add Review

Our Products

Lifting Points

Allows quick exchange of load suspension equipment by easy disconnecting and connecting of the clamshell rope and the closing rope of the hoist.
Bow and pin made from high-tensile steel that are quenched and tempered
Load capacity from 0.1 T to 1550 T.
Minimum breaking load = 6 times WLL (load capacity).
View Complete Details

Transport Skates

Skates are used to move heavy machinery manually in and around shop floors or industrial areas where the usage of cranes are not feasible. The load is distributed along the wheels equally which in turn is supported by high end bearing, increasing the ease of transportation. Transport skates are highly recommended for movement of heavy machinery within a confined space.
Features

Low dead weight at high load capacity.
360 rotation due to ball bearing castors.
Enables the load to be pushed transversely to the direction of movement.
Galvanized axles and safety clip ring for improved corrosion resistance.
View Complete Details

Wheel Block

Wheel block is fixed at the ends of the end carriage for the motion of the crane along the rail or path.
The wheel block encloses a wheel which is coupled to the motor with the help of a shaft and a keyway.
Wheel block are classified as driving and the non-driving wheel.
7 different wheel diameters from 125 mm to 500 mm.
The wheels are placed on the rails on which they move.
View Complete Details

Rail Sweep

Attached to the front portion of the end carriage to sweep the dust off the crane track.
Sweeps away the particles, scraps away from the rail and enables the smooth travel of the crane.
View Complete Details

Travel Drives

Travel drives encloses both the motor and the gearbox.
The drive unit is compact and fully enclosed with no exposed gears.
Low-maintenance crane travel drive.
Two-speeds of 205 mmin are provided.
Low noise gears.
They are integrated with electro-mechanical braking.
High speed and low speed operations with the help of variable frequency drive (VFD) and two speed motors.
Hardened and ground gears are fully immersed in oil and enclosed in a casing in gearbox.
The drives enable smooth and snag-free operations.
Coupled with the wheels of end carriage or trolley to produce the motion.
Modular design includes gearbox, motor and brake for ease of maintenance.
View Complete Details

Vacuum Lifting

Vacuum lifting is commonly used for handling fragile or malleable materials such as sheet metal, glass panels, wooden and concrete slabs. The vertical movement can be executed by means electric chain hoist. Magnetic lifting involves lifting magnets that are used to lift flat or round surfaces in general. One of the basic requirement is the magnetic property of the load.
View Complete Details

Slings

Slings play a vital role in lifting a heavy symmetrical or non-symmetrical load. A Sling is considered to be a vital juncture during a lifting process. Nevertheless, a failure in the sling can result in a catastrophe. Here at CarlStahl Craftsman we are dedicated in providing the at most safety standards to our clients.
View Complete Details

Shackle

Allows quick exchange of load suspension equipment by easy disconnecting and connecting of the clamshell rope and the closing rope of the hoist.
Bow and pin made from high-tensile steel that are quenched and tempered
Load capacity from 0.1 T to 1550 T.
Minimum breaking load = 6 times WLL (load capacity).
View Complete Details

Pallet Trucks

Pallet truck is a tool used to lift and transport pallets. Commonly used in manufacturing sectors, storerooms, for professional work on trucks and ramps, for transport of long and bulky goods, etc. Can be often used as a substitute for fork lift in small scale industries.
View Complete Details

Hand Pallet Truck

Precision ball bearings in all wheels and rollers.
Premium quality high strength steel.
Corrosion protected stainless steel lowering valve.
Controlled and smooth lowering.
Powder coated.
Angled high-strength polymer handle for best ergonomic grip.
Welded handle bar connection provides stability and safe handling.
product weight optimized to 68 kg for easy handling.
Steering wheels of abrasion-resistant polyurethane and Tandem load rollers of polyamide.
Load Capacity upto 2500 kg and lifting height upto 200 mm.
View Complete Details

Hydraulic Lifting Devices

pdfClick here to download the product catalogue.

Hydraulic devices are used to lift medium to heavy parts or machines or any objects with less pressure which are not possible using pneumatic devices. We provide various range of high quality hydraulic devices suitable for user application.
Features

Surface treated piston rod for longer life.
Working pressure up to 700 bar.
Base and piston rod mounting on most models
Heavy duty cylinders can lift up to 2000T
Spring assisted return to ensure smooth and safe re
View Complete Details

Crane Kits

Crane kits are preengineered, complete crane component packages utilizing cutting edge technology including the innovative electric wire rope hoist and chain hoist. Variable frequency drives are standard on all motions for smooth starts and stops. Electrical cabling and bolted structural connections simplify assembly. Our crane kits creates a new opportunity for crane manufacturers and users around the globe to complete orders efficiently and cost-effectively. Carlstahl Craftsman produces the hoists, the components and equipment of the cranes, tests everything and then pre-assembles and delivers the completed crane to the customers.
View Complete Details

End Carriage

End carriage is produces the crane motion.
Flexible beam connection system to allow optimization of available space.
Removable closing plates allows access to the wheels.
Rigid and box construction to bear heavy load.
Easy access to wheels for maintenance.
Antifriction permanently lubricated bearings.
Equipped with buffers, limit switch and anti-collision devices.
The precisely controlled travel drives make fast, accurate positioning of the load without load swing possible.
Smooth starting, steady acceleration and gentle braking.
View Complete Details

Guide Rollers

Guide rollers guide the end carriage on the track.
It prevents the slipping of the end carriage away from the track.

crane-kit4
View Complete Details

Anti-Crane Collision Device

Prevents the collision of two cranes operating on the same rail.
Proximity range 3m.
Anti-crane collision device coupled with the reflector plate controls the motion of the crane in proximity.
The device sends the signal which is reflected when the reflector plate is near.
The return signal is picked up by the device and stops the crane and prevent the collision.
View Complete Details

Limit Switch

Limit switches are used for braking and switching-off operations.
They cuts the power to the drive motor when the crane moves beyond the travel limit.
The limit switch hits the striker at the travel limit and changes the direction of rotation of the travel drive.
Linear and rotary limit switches are provided for safe working.
View Complete Details

CT Festoon System

Suspended from galvanized steel C-track.
Connections on cables make installation, repair and replacement simple and fast, saving expensive down time and the cost of an electrician.
Galvanized steel cable trolleys with steel and plastic cable supports.
Independent C-track for pendant station allows operator to be positioned at a safe distance from load.
All movements can be controlled from convenient place with the help of the pendant.
View Complete Details

Movable Cranes

Movable Cranes can be moved manually with ease. Without any foundation or fixed base, these cranes can be placed wherever it is needed. It can move with the assembly process and is designed to work near machines and assembly areas. It helps to save time and money by its ready availability and solves problems by its many uses. It can be either moved by its own undercarriage, by a forklift or by a gantry crane.
Features

Easy moving jib and push trolley.
Jib arm with adjustable strap brake.
Highly stable and easily portable.
Movable crane with standard jib arm with slewing range of 270 and lifting capacity up to 500 kg.
View Complete Details

Monorail

Monorail cranes are ideal for production processes which require lifting and moving the parts or products along a fixed path. A monorail system is a simple lifting device with one stationary beam that has a hoist and trolley. Because of its lightweight design, it delivers fast speeds for handling materials to specific locations. Buildings with high ceilings, hard-to-reach locations and outdoor areas can be easily covered with the help of monorail cranes.
Types of monorail cranes

The monorail cranes are classified based on the line of travel. The track decides the type of the crane which are classified as straight monorail and curved monorail.
View Complete Details

EOT Cranes

Types of EOT Crane

Our range of EOT cranes includes Single girder EOT, Double girder EOT, Single girder under-slung and Double girder under-slung EOT cranes.
Single Girder EOT Crane

Lifting load capacity upto 12.5 Ton.
Span of the crane upto 30m.
Low deadweight.
Maximum hook approach and optimum space utilization.
High speed and low speed motions are achieved using Variable Frequency Drive (VFD) or two speed motor.
Reliable operations with Anti-collision device and limit switches.
Designed and manufactured to suit all type of industries.
Suitable for foundry environment which includes hot metal handling applications with maximum load capacity of 6.3 Ton.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Gowtham Ram (Carlstahl Craftsman Enterprises Private Limited)
  • No. 1078, 4th Floor, Senthel Towers, Avanashi Road, Coimbatore, Tamil Nadu 641018, Avinashi Road
  • Share us via