Cmp Pvt. Ltd. Mumbai, Maharashtra

AIR AGITATION UNITS are used to provide water washed oil-free air for the agitation of cleaning, swilling and plating tanks. Two standard sizes of Air Agitation Units are available and the size of unit required depends upon the total length of coils used to agitate the solution. For cleaning, swilling and general plating solutions, it is recommended to provide double row air agitation coils under each line of work. Details of AIR AGITATION UNITS capacities are given in the Table below. These units operate at a working pressure of 0.22/0.25 kg/cm2 (3/3.5 p.s.i.). If the Air agitation unit is situated at a considerable distance from the tank, allowance should be made for reduction of pressure due to friction in the service pipework. Loss of pressure will also result if the holes in the air agitation coil are enlarged. The holes are normally drilled in the on the top of the coil which should be situated directly under the plating jigs to ensure the efficient removal of hydrogen bubbles from the articles during processing. We shall be pleased to advise on the choice of Air Agitation Units to suit your exact requirements.

Barrel plating is widely employed for the bulk processing of small to medium sized components. The types of barrel plating include perforated barrels which are immersed in plating solution and open ended solid barrels in which the solution, the anode and the work are contained inside the barrel (inclined). Barrels are available of suitable plastic material with perforation of 3mm, 1.6mm, or herringbone. The inclined plating barrels are available in four capacities 0.14 litres (Mini), 0.56 litres (Minor), 2.25 litres (Major) and 9/14 litres (Master). With the built in mechanism, the barrel is emptied efficiently, simply by hand with minimum effort, discharging the plated articles through a chute into a basket thus eliminating hoist. These barrels are ideally suited for use in limited space, and suitable for, most solutions except chrome. Wasteful build-up of metal inside the barrel is minimised by specially designed cathode contacts which are completely covered by the articles during deposition. The large capacity of the submerged barrel and the rapid turnaround of loads give the Numinik a greater rated output than most barrels of comparable size.

CMP Mechanical Agitation Units  come in two versions, horizontal cathode rod moving arrangement and vertical cathode rod moving arrangement consisting of an oil immersed reduction gear unit based on an angle iron fixture to suit the plating tank.

CMP also manufacture and supply Process Tanks of any description in desired capacities out of any material, be it mild steel, stainless steel, rubber, poly-propelene etc., with or without lining, complete with ducting system for efficient exhaustion of fumes. Ducting can be fabricated in a range of materials including fibre glass and can be adapted for any process.  

Special purpose rectifier constant current density meters/controller, polarity change over switches, periodic reverse units, resistance boards, Semi Automatic heat control panels, temperature indicators, digital ampere hour meter, all type & capacity electric immersion heaters.

  CMP specialises in manufacture, supply and installation of 'GLYDO' type High Production Metal Finishing Plant complete with Transporter and associated facilities on a turn-key basis. Most suitable for all varieties of commercial plating in manual, semi-automatic or fully automatic and custom built versions.