Other Products / Services #99505

Wall, Ceiling holders, and ceiling roses are designed to add elegance to the modern house and home. All Lamp Holders are made from heat resistant material and are provided with skirts to save your fingers from burns. They are fitted with heavy duty brass plungers which consist of steel wire spring to ensure uniform pressure on the bulb and avoid loose connections. Pendent Holders has an automatic cord Grip System. A range of 2A, 6A, 13A and 16A. Unlike conventional plugs which are made in two parts CPL Plugs are made with solid pins. Solid pins offer better conductivity and therefore carry the rated load without any chance of failure. They also consist of Pinch type wiring system which ensure firmer contact and increases the contact area, unlike the conventional plugs which allow loose connections. Delrin Cord Grip System which ensures constant connection during accidental cord pull, or even during the roughest handling is also incorporated into the design. 13A & 15A plugs are available with inbuilt fuse to safeguard your costly electrical equipment and appliances.

Power Switches are available in 20A & 45A Double Pole Versions. All current supply contacts in the CPL range of switches are of Silver Cadmium Oxide which is ideal for applications where a high potential arc exists. These contacts offer high resistance to corrosion, high mechanical strength, low contact resistance, good arc-interrupting capabilities and maximum resistance to arc erosion. The Compact design conceals a positive make and break operation, which ensures control in the most adverse conditions, like welded contacts due to short circuits.

All busbar come with fabricated body, rust protected and Phosphated in 7 tank process. All the sides of our busbar are detachable to facilitate easy wiring and allow expansionextension by coupling to another busbar. We use electrolytic Copper rectangular dual rods designed to be used with our clamps and sockets to facilitate all 3 types of cable sockets namely soldering type, lugs or flat copper strips. Our Busbar design ensured the correct rating all through out its use and will not allow any over load as the conventional model widely used in our country. No drilling required in our design, just add as many clamps to connect additional cable up to the limit of the length of the dual copper bars.

We offer Single and Double Switched.13Amps Single and Double switched and un-switched sockets were added to the CPL range for the export market. They all carry to safety and design features plus carry the same quality standards which are there in all passion items.

We are offering ceiling holders.Wall, ceiling holders, and ceiling roses are designed to add elegance to the modern house and home. All lamp holders are made from heat resistant material and are provided with skirts to save your fingers from burns. They are fitted with heavy duty brass plungers which consist of steel wire spring to ensure uniform pressure on the bulb and avoid loose connections. Pendent holders has an automatic cord grip system. A range of 2a, 6a, 13a and 16a. Unlike conventional plugs which are made in two parts cpl plugs are made with solid pins. Solid pins offer better conductivity and therefore carry the rated load without any chance of failure. They also consist of pinch type wiring system which ensure firmer contact and increases the contact area, unlike the conventional plugs which allow loose connections. Delrin cord grip system which ensures constant connection during accidental cord pull, or even during the roughest handling is also incorporated into the design. 13a & 15a plugs are available with inbuilt fuse to safeguard your costly electrical equipment and appliances.

We are offering change overs range:16 amps to 300 amps 415 volts. (available in 2 poles, 3 poles and 4 poles)quality standards: is 4064 1978-part I and iifeatures: deep drawn and epoxy coated enclosures from 16 amps to 63 amps. Rust protected and phosphated in 7 tank process. Covers are detachable and pvc gasket packing for weather proofing. All live parts are shielded. For maximum safety all doors are incorporated with an interlocking device so that they open only when the switch handle is in off position. The fuse carrier has hrc or rewire able options available. Cpl changeovers are designed for no-load control of alternative supplies.

We offer Switched Socket outlets.Switched Socket outlets are available in 6A, 13A 16A and 616A combined. Compact and renowned for their safety features, Safety Shutters ensure maximum safety from accidental contact. All Sockets incorporate Phosphorous-Bronze contacts which have proven themselves to be more effective than Brass. Precisely positioned terminals facilitate easy connection and trouble free service, once installed.

We offer Moulded Boxes.Available in Metal, PVC, and Moulded Series CPL Moulded Boxes facilitate fast installation and easy wiring of all surface and flush mounted accessories. These boxes have sufficient knock-outs and are available in different dimensions to cater to your specific need. The metal boxes are deep drawn from a single piece of sheet steel to give a edge less single surface, which is then Phosphated and zinc plated, unlike the metal boxes available made out of CRCA or Galvanized sheet steel which tend to rust from the cut edges in humid climate

We are offering plastic boxes available in metal, pvc, and moulded series cpl moulded boxes facilitate fast installation and easy wiring of all surface and flush mounted accessories. These boxes have sufficient knock-outs and are available in different dimensions to cater to your specific need. The metal boxes are deep drawn from a single piece of sheet steel to give a edge less single surface, which is then phosphated and zinc plated, unlike the metal boxes available made out of crca or galvanized sheet steel which tend to rust from the cut edges in humid climate

We are offering isolator switch.Isolator switch front as well as side handle operation range: 16 amps to 63 amps in deep draw design and 100 & 200 amps in fabrication design in tpn (triple pole with neutral) 415 volts.Quality standards: is 4064 1978-part I and iifeatures: deep drawn and epoxy coated enclosures from 16 amps to 63 amps. Rust protected and phosphated in 7 tank process. Covers are detachable and pvc gasket packing for weather proofing. All live parts are shielded. For maximum safety all doors are incorporated with an interlocking device so that they open only when the switch handle is in off position. All front operation isolators come with dmc handles and with a on off dial indicator.