Delair India Pvt. Ltd. Gurugram, Haryana

• RANGEUpto 17000 m3/hr (Upto 10,000 cfm)

The hot compressed air from the compressor passes through one of the absorbers where the desiccant is regenerated by heat. The compressed air is then cooled in the aftercooler while condensation takes place in moisture separator at the same time. The compressed air then flows to th e other adsorber for drying. The desiccant adsorbs the water vapour and dried air leaves the adsorber. The desiccant is very hot after regeneration and cannot asdsorb moisture unless it is cooled. The hot compressed air is cooled in the regn. Cooler. The cooled air is then guided through 4 way valve into the regenerated adsorber for removal of moisture. When one adsorber has been regenerated and cooled (i.e. is ready for compressed air drying) and the other adsorber has reached the maximum adsorption capacity, the adsorbers can be switched over. The first adsorber will dry the compressed air while the other will be generated.

This Blower Reactivated Air Dryer is quick to absorb the moisture from air to deliver Moisture-free Air. We are a respected Manufacturer and Supplier of Blower Reactivated Air Dryer. This Blower Reactivated Air Dryer uses the best filter cartridges and other components, ensuring its long-life. Known For Quick installation Ready to use Working on the latest air drying technique High power-efficiency

Used for quickly cooling the air, the Air Cooled Aftercooler , which we offer, is based on the latest technological concepts. We are a dependable Manufacturer and Supplier of Air Cooled Aftercooler. The compact design of Air Cooled Aftercooler saves a lot of space and makes it simple to install. Working Air Cooled Aftercooler cools incoming compressed air, using an axial flow electric fan This fan draws air from the atmosphere and passes it through a fin and tube type heat exchanger

• Range10.6 cfm to 500 cfm (18 m3/hr to 850 m3/hr)

Refrigeration Dryer – Delpet series are high pressure Dryer. These Dryers are specially designed for PET Bottle manufacturing process. Compressed air is used to blow the bottles/containers to the desired shape and size. Key Features / Benefits Available in 17 standard models Capacities from 10.6 cfm to 500 cfm Microprocessor based delsmart Colour led card to readout dew point, operating status and faults indication Provides pressure dew points range to 3-6°C Unique, proprietary, foamed in Heat Exchanger Out performs other Dryers Certified and reliable performance Compact design

Zero Air Loss type Auto Drain Valves works on level based principle. Valve opening / closing takes place as per preset (factor set) levels. Direct acting Zero energy loss Fully automatic Maintenance free Easy to install

Delpet Compressed Air Dryers are specially designed for PET Bottle manufacturing process. Compressed air is used to blow the bottles/containers to the desired shape and size. SPECIAL FEATURES Wide range of 4 Standard models with capacities from 34.7 m3/hr. To 104 m3/hr. higher capacities are available on request Atmospheric dew point achievable (-) 40°C and below Electronic controls/solid state timers for automatic and reliable operation Low power consumption Equipped with muffler on purge air outlet to reduce noise level Specially graded desiccant DelsorbTM 10 for optimum performance and long life