We manufacture and export the high caliber bogie hearth furnaces that are used for following applications: Annealing Normalizing Hardening Stress Relieving Solution Annealing Tempering, and so on. These applications are related to different grades of Steels in form of castings, forgings, fabricated components, etc. The furnace includes unique features that are cited below: Top caliber Increased performance output Mechanized bogie drive Excellent temperature uniformity Close temperature control by P.I.D controllers Superior type insulation suitable for the hot gas circulation Separate combustion section Uniform properties of heat-treated parts Ideal for long sections, coils and castings Sturdy bogie design to take care of charge weight

Pickling tank are fabricated from Poly Propylene plastic sheets from 20 mm thk to 40 mm thk With outer casing made of steel lined with FRP. These pickling tank are used for degreasing and acid cleaning of parts In the galvanizing process or other plating industries.

induction heater for fast, safe & economical heating of beatings. Available in 4 models pih- 2001 power 3.5/4.0 kva controls micro -controller bassed pih- 2001 power 6.0/8.0 kva controls micro -controller bassed pih- 2001 power 11/12 kva controls micro -controller bassed pih- 2001 power 25.0 kva controls micro -controller bassed

We are one of the leading manufacturers and exporters of best quality powder coating plants for aluminum profiles and other equipments like electrical switchgear and Auto parts. With our strong infrastructural facilities, we also supply the product in tailor made turnkey projects. The product has been widely used due to its following features: Ease of operation Corrosion resistance Durability

The hot dip galvanizing plant is by par one of the most efficient and ecological methods of protecting steel, particularly from corrosion damage. The products are widely used in all those applications where steel or steel products are exposed to severe atmospheric conditions. Application areas of the hot dip galvanizing plant includes following: Steel towers for electrical transmissions. Steel towers for Mobile tower equipments. Road side barriers. Electric poles. Cable trays. Fasteners & Hardware items. Pipes. Salient features of Hot Dip Galvanized Plant are mentioned below: Lower production costs Economic savings Durability Triple protection Rapid application Quality and reliability Mechanical resistance Easy testing of galvanization quality Total covering of even the most complex steel product forms

• Pay Mode TermsL/C (Letter of Credit)
• Port of DispatchMUMBAI
• Production Capacityas per Order
• Delivery Time2 Weeks
• Packaging DetailsPacking In Carton 1000 Nos
•   

• Pay Mode TermsL/C (Letter of Credit)
• Port of DispatchMUMBAI
• Production Capacityas per Order
• Delivery Time2 Weeks
• Packaging DetailsPacking In Carton 1000 Nos
•   

APPLICATION  : This is designed for galvanizing of Cable trays, MS structural, Poles and other miscellaneous items by Hot dipping in the zinc molten bath at 450 to 455 deg C. The general arrangement of galvanizing bath furnace shall be as illustrated in our enclosed drawing.   DESCRIPTION        The galvanized bath furnace offered is a Diesel / Gas fired with Steel kettle of special         material used for melting of zinc and designed for continuous operation.          The galvanizing bath furnace shall have a Kettle of size of 12, 000 mm long x 1, 500 mm         width x 2, 000 mm Deep.The Kettle is installed inside the pit suitably thereby         bringing the operating level at about 750 mm from floor level.   The furnace will be of indirect heating type with suitable chamber, burners   and Blowers. Inspection pockets provided for inspecting the furnace chamber and kettle wall. Zinc drain pocket for drainage of molten zinc in event of kettle puncture. Burners will be suitable for  Diesel or Gas.   For controlling the temperature of molten bath we include an automatic temperature control system comprising of a digital temperature controller, thermocouple sensor and solenoid oil valves.   The burners will automatically go fast and slow during the process whenever temp goes down, it will go fast and when temp goes high, it will slow as per the set off temperature. Due to this the consumption of fuel will be minimized.  The Furnace consist of a refractory brick lined work using high quality alumina bricks. The galvanizing bath furnace is arranged for firing with 4 Nos. reputed make oil/gas fired  burners with supporting Blowers, Control Valves etc.   Electrical Control panel is supplied incorporating digital temperature controller and various electrical switchgear and is completely wired from inside and ready for connection to the mains.   The galvanizing bath is capable of giving an out put of 50 – 60 tons/day. However the           actual out put would vary considerably with the size, shape and weight of the steel structure and parts to be galvanized.      

• Speed360 RPM.
• Motor10 HP
• Brand NameDELTA
• Production CapacityFor 2 Mm Dia Wire At 100 Mm Barb Pitch
• Thicknessup to 2.5 mm dia

• SizeStandard
• MaterialMetal
• ApplicationIndustrial Use
• Weight1-5kg
• ColorMetalic
• FinishingPolished

We offer nitrogen plants of high quality, better performance and durability. The product is widely used to produce, compress, store nitrogen for various purposes. Using PSA process.  The plants are widely used in various industries, which includes following: Chemical Industry Wire Drawing and galvanizing units. Food Industry for packaging of wafers, biscuits etc.

The refractory lining available with us is assured to be of ultimate grade and is used in situations that demand resistance and maintenance of high temperatures. Acid proof brick lining using epoxy material for better sealing and protection. Furnace refractory lining.