Coimbatore, Tamil Nadu, India
Our Products
Be the first to review this product
Dissolved ozone monitor is the ideal choice for on-line monitoring and control of ozonation systems. Capable of measuring ozone concentrations in the range of 0 - 4 ppm.
Faraday's monitor is ideally suited to water bottling systems or municipal water treatment. Utilizing a highly selective polarographic membrane sensor, dissolved ozone can be monitored interference-free, with little maintenance. There are no moving parts and what little maintenance is required can be done in just a few minutes. Installation is simple and you can be up and running in a few minutes. Available in loop-powered, AC operated, portable versions, our monitor is well suited for almost any ozone measurement requirement. And for even more flexibility, the instrument is available with an optional pH sensor input that allows a single unit to provide both dissolved ozone and pH analog outputs.
Be the first to review this product
Teflon tubes are used to pass the flow of ozone gas from the ozone generator to the mixing equipment such as diffusor or venturi injector. Teflon is an ozone compatible material and will not be corroded by ozone.
Teflon tubes are used to pass the flow of ozone gas from the ozone generator to the mixing equipment such as diffusor or venturi injector. Teflon is an ozone compatible material and will not be corroded by ozone.
Be the first to review this product
Static Mixers are used for effectively mixing gas with liquid or two liquid after the venturi injection. The device consists of mixer elements contained in cylindrical (tube) housing.
Similarly the overall system design incorporates a method for delivering gas with liquid - two streams of liquids into the static mixer. As the streams move through the mixer, the non-moving elements continuously blend the materials. Complete mixing is dependent on many variables including the fluid properties, tube inner diameter, the number of elements, and their design.
Be the first to review this product
Faraday manufactures venturi injectors in engineering plastic as well as stainless steel for various ozone applications and other uses where liquid and gas mixing is neccessary.Faraday has wide range of venturi injectors from inch to 2 inch.
Diffuser is used to mix ozone in water. Diffuser is made of fine pores that mix ozone gas as bubbles in water.
Be the first to review this product
NRV - Non Return Valve check valves ensure that the gas/ water from the venturi injector does not back to the ozone generator in case of back pressure/ back flow.
Be the first to review this product
FVP10, a creation of Faraday Ozone, is an innovative product which can be wall mounted. It generates Ozone gas to eliminates microbes, inhibit fungi, resist viruses, remove toxin and odours. It sterilizes the surface of fruits and vegetables effectively, to enhance the taste of purity and health.
FVP10 has timer with LED indicator for time setting, which shows 5 different timing varies from 5 - 60 minutes. Set the desired time according to the application.
It generates 100 mg/h ozone, which will discharge to cleaning bowl through silicon tube, for disinfection.
Food is something we cannot ignore, as without it, we will not survive. Food safety has become more and more prime concern to those who care what we eat. Washing fruits, vegetables and meat with plain water will not help in removing pesticides and other toxic contaminations on its surface. Understanding this we have introduced out latest product, FRUIT & VEGETABLE PURIFIER (FVP10) which utilizes the powerful ozone technology for removing all the impurities on the surface of fruits, vegetables and meat.
Benefits :
How to Use ?
Air contains 21% oxygen, 78% nitrogen, 0. 9% argon, and 0. 1% other gases. Faraday OxygenGenerating Systems separate oxygen from compressed air through a unique Pressure SwingAdsorption (PSA) process.
The PSA process uses molecular sieve (a synthetic zeolite), which attracts (adsorbs) nitrogenfrom air at high pressure and releases (desorbs) it at low pressure. Faraday OxygenGenerators use two vessels filled with molecular sieve as adsorbers. As compressed feed airflows through one of the vessels, the molecular sieve adsorbs nitrogen. The remainingoxygen passes through the vessel and exits as the product gas. Before the adsorberbecomes saturated with nitrogen, the feed air is diverted to the second vessel. At that point, the sieve in the first vessel regenerates by desorbing the nitrogen through depressurizationand purging it with oxygen from the second vessel. This process is then repeated in thesecond vessel to complete a cycle that allows the oxygen generator to deliver a constantflow of product oxygen at 90% minimum purity. Under normal operating conditions, themolecular sieve is completely regenerative and will last indefinitely.
Be the first to review this product
The Medical Oxygen Concentrator uses ambient air as a source of oxygen. It is designed to deliver continuous and concentratedflow of oxygen. It has been designed to provide a combination of enhanced features, reliability of a proven technology and unsurpassed quality.It runs on electricity and the only maintenance required is the regular cleaning of filters.
Air contains 21% oxygen, 78% nitrogen, 0. 9% argon, and 0. 1% other gases. Faraday OxygenGenerating Systems separate oxygen from compressed air through a unique Pressure SwingAdsorption (PSA) process.
The PSA process uses molecular sieve (a synthetic zeolite), which attracts (adsorbs) nitrogenfrom air at high pressure and releases (desorbs) it at low pressure. Faraday OxygenGenerators use two vessels filled with molecular sieve as adsorbers. As compressed feed airflows through one of the vessels, the molecular sieve adsorbs nitrogen. The remainingoxygen passes through the vessel and exits as the product gas. Before the adsorberbecomes saturated with nitrogen, the feed air is diverted to the second vessel. At that point, the sieve in the first vessel regenerates by desorbing the nitrogen through depressurizationand purging it with oxygen from the second vessel. This process is then repeated in thesecond vessel to complete a cycle that allows the oxygen generator to deliver a constantflow of product oxygen at 90% minimum purity. Under normal operating conditions, themolecular sieve is completely regenerative and will last indefinitely.
Be the first to review this product
The OXI-5 Series Oxygen Concentrator is completely self-contained, and its overall design is built for 24 hour operation. The total industrial strength and quality of the OXI-5 Series will provide the end-user with years of dependable reliable, and maintenance-free operation.The OXI-5 Series is built on a powder coated steel frame/chassis. Its internal air compressor, aluminum sieve beds with state-of-the-art molecular sieve material, filtration and flow of control systems are designed for years of operation.
Each OXI-5 Series goes through rigorous quality control testing procedures. The OXI-5 Series is available in 120 V, 60 Hz, 220-240 V, 50 Hz models for use worldwide.The OXI-5 oxygen modules incorproate proven pressure swing adsorption (PSA) principles into a unique patented design which is far more compact, efficient, rugged and lower in cost than conventional PSA systems.
Features:
Reliable oxygen production
Rugged, environmentally tolerant design
Compact & lightweight for maximum design flexibility
Constant deliver delivery pressure
Low capital and operating costs
Eliminates the need for an external product tank
Suitable for use in any industrial location
Extended Compressor Life
Instaclean - Air, odor sterilizer and room sterilizer used for Shock Treatment in Indoor Spaces to remove Odor, Mold growth, Fungal and Bacteria and viruses.
Destroys odors: smoke, pet, cooking, and chemicalKills bacteria, airborne viruses and other micro organisms Eliminates odor without producing any hazardous byproductRemoves allergy causing pollen and microbesPrevents mold and mildew, the leading cause of Legionnaires DiseaseIts natures own purifying process
Be the first to review this product
OurInstacleanAS50 a portable air sterilizer/sanitizer that uses ozone for treatment of rooms, halls etc by circulating ozone inside the room using inbuilt blowers. Thisinstacleancan be used almost everywhere - anyplace where odour needs to be removed or area should be sterilized/sanitized and made free of micro organisms.
OurInstacleanis suitable for room sizes of upto 2500 cubic feet for 1 hour treatment time and also for heavy odour/microbial treatment. ThisInstacleancomes with a programmed timer control to be set for 5 minutes, 10 minutes and such based on the room size.
The Purification Process Oxidation :
Ozone, when introduced into the atmosphere in low levels is an excellent air purifier. Ozone in itself is an unstable three-part molecule of oxygen. When an ozone molecule contacts a pollutant, it attaches itself to it and changes its molecular structure in most cases to carbon dioxide and hydrogen. By destroying viruses, bacteria and other microbial contaminants, the source of the odor is eliminated and the odor does not return. Ozone destroys the contaminant molecule; it doesnot mask it as other methods do. Ozone treats all of the air, not just the air that is pulled into it as do the vast majority of electronic filters that are on the market today. Ozone residual will revert back to pure oxygen, making it environmentally friendly.
Our vast experience in ozone generators of all ranges comes from our in-house Research & Development team who consistently improvise on implementing newer technologies to our products
We design and manufacture ozone generators ranging from 1 gram per hour to 50 kilogram per hour suitable for various applications. Our High Voltage, High Frequency Corona Discharge technology enables us to achieve High ozone concentrations of 8 12 % by weight. Higher the concentration, better the dissolved ozone efficiency and lower the oxygen feed gas requirement/consumption.
We have different series of ozone generators that offer various ranges, features and integrations required for different applications and running conditions.
A-Series comprises our ready-to-use range of ozone generators with 1 g/h to 5 g/h models available. It is an integrated ready-to-use system with inbuilt oil free air compressor for feed gas preparation - produces ozone by just giving power connection to it. No other additional connections are required and the installation is very simple.
Our A-Series uses our patented High Voltage, High Frequency Corona Discharge technology for ozone production - the most advanced method available. Our A-Series is built on a GRP fiberglass enclosure that is rugged, has longer durability and withstands harsh weather conditions.It is wall mountable. Our A-Series offers good value for money with superior technology for ozone production that offers continuous and reliable ozone output.
All the materials used inside the machine are highly compatible and resistant to ozone such as SS fittings, SS base plate and Teflon tubes for connections. Air cooling by using highly efficient fans in specific designed areas allows for better heat dissipation thereby increasing the overall efficiency and life.
