Post Buy Requirement
FM
Batala, Punjab, India
Add Review

Our Products

Roll Turning Machine

Our Roll Turning Machine is Used for Proof and Finish Machining of Rolls for Rolling Mills, Cement Plants, Paper Plants & Heavy Industries. These Heavy Duty Roll Turning Lathes Possess High Rigidity Which, in Conjuction Has Sufficient Power Drive to Enable Carbide Tipped Tools to Be Used to Their Full Capacity. the Roll Turning Lathe Machine is Usually Equipped with Several Carriages and Special Steady Rests Which Allow the Matting Rolls to Be Set Up. There is also a Provision for Electric Drive of Feed Gear Boxes in Addition to the Standard Manual Process. for all this and Above, We are Reckoned to Be One among the Leading Heavy Duty Roll Turning Machine Exporters from the Country.

<b>Specifications</b>

Length of Bed (mm)3000350045005000600075009000
Width of Bed (mm)450500500500500650-1625650-1625
Height of Centre (mm)400445445460460525-1400525-1400
Spindle Hallow (mm)809090105115130130
Total Width of Gap (mm)380510510510510600600
Width-of ? Gap in front of face plate (mm)280410460460460510510
Swing over Saddle (mm)600660660690690760-2250760-2250
Swing in Gap (mm)132515251525157515751675-32501675-3250
Admit between Centre (mm)1600200030003000400050006000
Lead Screw Dia (mm)55606565656570
Feed Shaft Dia (mm)30303035384040
Approx. Weight (mm)3445578-1510-20
H.P. Required (H.P)355557.5
View Complete Details

Plano Miller Machine

The Exclusive Plano Miller Machine that We Manufacture is the Outcome of High Quality Raw Materials and Precision and Accuracy of the Team of Expert Designers and Engineers. for Being Resistant to Corrosion and Rust, These Machines are User Friendly. They Involve Less Maintenance Cost and are Easy to Install and Operate. the Heavy Duty Plano Miller Machine is Available At the Most Competitive Market Prices. So, We are Reckoned to Be One of the Major Plano Milling Machine Suppliers Based in India.
View Complete Details

Planner Machine

We Make a Rarefied Range of Surface Planner Machine Made Up of the Best Quality Raw Materials Which Render It Toughness and Durability. this Heavy Duty Planner Machine Comes in Numerous Shapes and Sizes So as to Suit the Specific Requisites of the Customers. Moreover, the Machines are Made Available At the Most Affordable Price Range. Today, We are Considered to Be One of the Leading Planner Machinery Manufacturers and Exporters from India. a Well Constructed Structure with a Bed, Bearings, Table, Cross Rail, Tool Posts, Etc. Has Rendered High Efficiency to the Machine.

construction of the Machine

design: It is a Very Double Rigid Column and Body B Ore System Planner Fitted with Ball Bearings.

the Bed: the Be is of Deep Box Section Type and is Tied Together At Frequent Intervals By Double Walled Bridge Pieces Extending to the Bottom of the Bed.

the Table: It is of Box Section Type and is Streamlined with Hand Scraped 'v' Way to Bear Heavy Load. It is Heavily Ribbed and the Rack Provided in It is Acurately Machines and Milling Cut.

the Bearings: the Main Bearings for the Gearings are Cast Solid with the Bed. Thea Gears Teeth are Hobbing Machine Cut Except Two Gears are Helical. Gun Metal Bearings have Been Provided for all the Shaft and Loose Pulleys. Taper Roller Bearings Can also Be Provided Instead of Gun Metal Bushes.

the Cross Rail: this is of Box Section Type with Large Surface. It is Suitable for Both Hand and Mechanical Drive.

tool Posts: These are Manufactured Out of Close Grain Alloy Castings and Steel to Stand Heavy Cut. These Can Be Driven Both Manually and Mechanically.

the Uprights: the Uprights are of Rigid Box Section Type. Keysed Firmly, Bolted On to Bed and are Capable of Absorbing the Heaviest Shocks Without Vibraion, Extra Pins are Provided to Re-fit the Machine Acurately After Once It is Dismantled.

the Drive: the Machine is Arranged for Direct Individual as Well as Two Belt Drive

accessories: Automatic Lifting Arrangements of Cross Rail.

<b>Planer Machine Heavy Duty Double Column</b>

Sizeft. mm8' 243810' 3048 12' 365714' 426716' 487618' 548620' 609622' 670524' 731526' 792528' 853530' 9144
Length of Bed V'S ft. mm12' 3657 15' 457218' 548621' 640024' 731527' 822930' 914433' 1005936' 1097339' 1188742' 1280245' 13716
Length of bed all overft. mm13396216487719579122670525762028853431944934103643711278401219243131074614021
Stroke of tableft. mm82428103048123657144267164876185486206096226705247315267925288535309122
Length of table all overft. mm92743113553133962154572175181195791216401237010257620278230298840319449
Thickness of Tableft. mm7-1/21907-1/21907-1/2190922592259225922592259225922592259225
Planing Width ft. mm412194-1/21371515245-1/216766-1/419056-1/419056-1/219816-1/219816-1/219816-1/219816-1/219816-1/21981
Height under cross railft. mm4012194-1/213714-1/21371515245152451524515245152451524515245152451524
Cutting Speed P.Mft. mm401200040120004012000401200040120004012000401200040120004012000401200040120004012000
Return Speed P.M ft. mm551650055165005516500551650055165004513500451350045135004513500451350045135004513500
Method of driving planerBeltdrivenBeltdrivenBeltdrivenBeltdrivenBeltdrivenBeltdrivenBeltdrivenBeltdrivenBeltdrivenBeltdrivenBeltdrivenBeltdrivenBeltdriven
Method of driving tableRack & PinionRack & PinionRack & PinionRack & PinionRack & PinionRack & PinionRack & PinionRack & PinionRack & PinionRack & PinionRack & PinionRack & PinionRack & Pinion
H.P. Reco-ended57-1/210101015151520202525
Weight in M. Tons (Appox)81011161820222528303235
View Complete Details

Radial Drilling Machine

Our High Speed Radial Drilling Machine is the Outcome of the Latest Technological Advancement. Our Radial Drilling Machine is Easy to Install and Easy to Operate. Involving Less Maintenance Cost, the Machine is Highly Demanded in the Market. the Machine is Specially Designed for Heavy Duty Drilling and all Cast Parts are of fine Close Grained Grey Iron Casting Machined to Close Tolerance. Rigid Inspection At Each Stage of Production Ensures the Quality of the Products. Today, We are Reckoned as One among the Leading all Geared Radial Drilling Machine Suppliers Based in the Country.

Dimension Of Radial Drilling Machine

ModelFMT 40AFMT 40BFMT 50AFMT 5OBFMT 50CFMT 65BFMT 75
Drilling Capacity in Solid mild Street40mm40mm50mm50mm50mm65mm75mm
Drilling Capacity in Cast Iron50mm50mm60mm60mm60mm75mm85mm
Dia of column230255255310310355355
Drilling Radius minimum550375525450425650675
Drilling Radius maximum105095011251100132516001950
Machine height from floor2420242027602760276031703320
Distance from spindle nose to top of the base plate minimum Spindle in downward positionf5010075100100100100
Distance from spindle nose to top of the base plate minimum Spindle in upward position1000115012001300130016001750
Drilling depth180180225225225225325
Working surface of base plate885 x 545885 x 545975 x 655975 x 6551150 x 6551460 x 8451735X940
Dimensions of Base1470 x 705 x 1801470 x 705 x 1801645 x 835 x 2001645 x 835 x 2001755 x 835 x 2002370 x 1015 x 2102640 x 1110 x 210
Effective area of box Table330 x 330 x 330330 x 330 x 330550 x 400 x 400550 x 400 x 400600 x 450 x 450 600 x 450 x 450 600 x 450 x 450
No. of spindle speeds & Range (RPM.xSteps)45 - 660 X 6 steps45660 X 6 steps40 - 790 x 9 steps40 - 790 x 9 steps40 - 790 x 9 steps25-930 12 steps20-740 12 steps
No. of spindle feeds & Range (Per Rev.xsteps0.095 0.215 3 steps0.095 - 0.215 3 steps0.80 - 0.180 3 steps0.80 - 0.180 3 steps0.80 - 0.180 3 steps0.010 - 1.25 6 steps0.010 - 1.25 6 steps
Taper Spindle nose SocketMT4MT4MT5MT5MT5MT5MT6
Main Motor2 HP2 HP3 HP3 HP3 HP5 HP7.5 HP
Elevating Motor1 HP1 HP2 HP2 HP2 HP3 HP5 HP
Total Weight of Machine (apporx.) Kgs.1700 Kg2000 Kg2500 Kg3000 Kg3200 Kg4800 Kg6500
View Complete Details

Shaper Machine

Our Exclusive all Geared Shaper Machine is Manufactured with the Best Quality Raw Materials for Cent Percent Efficiency. the Entire Product Range is Durable and is Capable to Perform Any Function Under Any Circumstance. Our Shaper Machine is Available in Range like Cone Pulley Belt Shaper Machine and Many Others. the Products are Available in Different Dimensions and Designs So as to Suit the Specific Customers Needs. Today, We are Considered to Be One of the Major Industrial Shaper Machine Manufacturers in India.
View Complete Details

Pillar Drilling Machine

We Make Available to You a Wide Range of Pillar Drilling Machine that Accomplishes the Toughest of the Drilling Tasks in the Shortest Time Span. Our Heavy Duty Pillar Drilling Machine is Manufactured Keeping the International Standards in Mind. These Machines have Found a Number of Uses in Various Industries for Their Durability and Efficiency. We are Counted Upon as One among the Reliable Pillar Type Drilling Machine Exporters from the Country for the Timely Delivery of Our Products. the Products Come in a Number of Specifications to Meet the Specific Customers Needs.

SpecificationPillar Drill Machine  PSL - 40 X  &  40A
Tilting working tableFIXED
Drilling capacity40 mm
Pillar Diameter135 mm
Spindle nose to table distance495 mm
Distance from spindle nose to base distance1000 mm
Auto feed speed(applies to PSL-40A only) 0.04 or 0.08
Distance from spindle center to pillar surface380 mm ( MAX )
Table Travel500 mm
Taper in spindleMT - 4
Number of speed8 Speed
Range of Speed (RPM)60 to 2000
Table Size (in mm)490 x 490
Base size (Machined Area mm)820 x 490
Overall Base Size (in mm)825 x 495
Spindle Travel250 mm
Pillar Length1475 mm
Overall height with pulley guard1840 mm
V-Belt sectionB - 74"
Weight (Approx.)500 kg.
Motor1440 RPM 3 Phase440 volts2 HP
Shipping Wooden Case  Inner Size LxWxH1200x540x1880 mm
View Complete Details

Vertical Boring Machine

We are Specialized in the Manufacturing as Well as Supplying of Heavy Duty Vertical Boring Machine in the Industry. the Portable Vertical Boring Machine, We Deal in are Accessible in Seven Different Ranges. They have Numerous Applications like that of Drilling Into the Vertical Direction of the Earth. These Vertical Boring Machines are Remarkable for Its Non Stop Functioning for Considerably Longer Period of Time. Besides, You Can Avail These Boring Machines At Much Discounted Rates. in Addition to This, We are One of the Most Reliable Industrial Boring Machine Suppliers in the Industry.

vetical Boring Machinespecifications
we Offer Very Reasonable Prices for Our Products. We have Many Different Kinds of Vertical Boring Machines Used in Many Different Applications.these Vertical Boring Machines are Very Useful for Industrial Purpose. We Offer Very Reasonable Prices for Our Products.

ParticularsFMT-1FMT-1.5FMT-2FMT-2.5FMT-3FMT-4FMT-5
Table Diameter (mm)1000150020002500300040005000
Max. Turning Dia with side Head below the Table Top (mm)1260176022602800350045005800
Max. Turning Dia with side Head in woring position (mm)1060156020602600330043005500
Max. Working height under Cross Rail (mm)1000125015002000225022502500
Max. Working Travel of Turret Head/Ram Head (mm)500600850850100012501250
Swivel Angle of Ram Head (Degree)30303030303030
Horizontal Travel of Side Head (mm)500600850800100010001250
Table Speed (RPM) 10/1008.5/855/502/201.5/1515/151/10
Feeds Horizontal & Vertical (No.)6666666
Range (mm/min )0.3/2.30.3/2.31/6.51/6.51/6.51/6.51/6.5
Rapid Travels of Heads & Cross Rail mm/min 300300300300300300300
Total H.P 15/2520/3025/403/5040/6040/6050/70
Approx. Weight of the Machine with two Heads (K.G)12 tons15 tons21 tons25 tons35 tons45 tons55 tons
View Complete Details

Surface Grinder Machine

We are offering surface grinder machine. We are the leading manufacutre of hyudralic surface grinder machine(2000 * 375)mm.
View Complete Details

Lathe Machine

We Manufacture An Exclusive Range of Heavy Duty Lathe Machine that is Manufactured with Maximum Accuracy and Minimum Tolerances. the Automatic Lathe Machine is Suitable for Single and Mass Production Work. the Improved Designed Machine is Well Finished in all Respects So as to Give High Precision Accuracy. These are Designed for Individual Drive as Well as Counter Shaft Drive in Order to Meet the Present Day Demand of all Classes of Industry. the Lathe Machine is Available in a Number of Sizes So as to Meet the Specific Requisites of the Customers. Today, We are Reckoned to Be One of the Major Lathe Machine Manufacturers in India.

Specifications

ModelSL-260SL-305SL-380SL-460
Length of Bed (Feets)6 10 1/21220
Center Height (inch)10 ½121520
Width of Bed (inch)13151822
Swing over Bed (inch)21243040
Swing over Cross Slide (inch)13171829
Swing in Gap (inch)31364659
Admit Between Centers (inch)368496180
Spindle Bore (inch)22 5/83 1/84 1/8
Dia of Lead Screw (inch)1 ½1 5/822 ½
Dia of Face Plate (inch)12162236
H.P Recommended2357.5
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Ankush Mahajan (Fasto Machine Tools)
  • 15-a Industrial Estate, Batala, Punjab - 143505
  • Share us via
  • Call 08068051312 Ext. 313
Retailer from Batala, Punjab
Post Buy Requirement
FM
Batala, Punjab, India
Add Review

Our Products

Roll Turning Machine

Our Roll Turning Machine is Used for Proof and Finish Machining of Rolls for Rolling Mills, Cement Plants, Paper Plants & Heavy Industries. These Heavy Duty Roll Turning Lathes Possess High Rigidity Which, in Conjuction Has Sufficient Power Drive to Enable Carbide Tipped Tools to Be Used to Their Full Capacity. the Roll Turning Lathe Machine is Usually Equipped with Several Carriages and Special Steady Rests Which Allow the Matting Rolls to Be Set Up. There is also a Provision for Electric Drive of Feed Gear Boxes in Addition to the Standard Manual Process. for all this and Above, We are Reckoned to Be One among the Leading Heavy Duty Roll Turning Machine Exporters from the Country.

<b>Specifications</b>

Length of Bed (mm)3000350045005000600075009000
Width of Bed (mm)450500500500500650-1625650-1625
Height of Centre (mm)400445445460460525-1400525-1400
Spindle Hallow (mm)809090105115130130
Total Width of Gap (mm)380510510510510600600
Width-of ? Gap in front of face plate (mm)280410460460460510510
Swing over Saddle (mm)600660660690690760-2250760-2250
Swing in Gap (mm)132515251525157515751675-32501675-3250
Admit between Centre (mm)1600200030003000400050006000
Lead Screw Dia (mm)55606565656570
Feed Shaft Dia (mm)30303035384040
Approx. Weight (mm)3445578-1510-20
H.P. Required (H.P)355557.5
View Complete Details

Plano Miller Machine

The Exclusive Plano Miller Machine that We Manufacture is the Outcome of High Quality Raw Materials and Precision and Accuracy of the Team of Expert Designers and Engineers. for Being Resistant to Corrosion and Rust, These Machines are User Friendly. They Involve Less Maintenance Cost and are Easy to Install and Operate. the Heavy Duty Plano Miller Machine is Available At the Most Competitive Market Prices. So, We are Reckoned to Be One of the Major Plano Milling Machine Suppliers Based in India.
View Complete Details

Planner Machine

We Make a Rarefied Range of Surface Planner Machine Made Up of the Best Quality Raw Materials Which Render It Toughness and Durability. this Heavy Duty Planner Machine Comes in Numerous Shapes and Sizes So as to Suit the Specific Requisites of the Customers. Moreover, the Machines are Made Available At the Most Affordable Price Range. Today, We are Considered to Be One of the Leading Planner Machinery Manufacturers and Exporters from India. a Well Constructed Structure with a Bed, Bearings, Table, Cross Rail, Tool Posts, Etc. Has Rendered High Efficiency to the Machine.

construction of the Machine

design: It is a Very Double Rigid Column and Body B Ore System Planner Fitted with Ball Bearings.

the Bed: the Be is of Deep Box Section Type and is Tied Together At Frequent Intervals By Double Walled Bridge Pieces Extending to the Bottom of the Bed.

the Table: It is of Box Section Type and is Streamlined with Hand Scraped 'v' Way to Bear Heavy Load. It is Heavily Ribbed and the Rack Provided in It is Acurately Machines and Milling Cut.

the Bearings: the Main Bearings for the Gearings are Cast Solid with the Bed. Thea Gears Teeth are Hobbing Machine Cut Except Two Gears are Helical. Gun Metal Bearings have Been Provided for all the Shaft and Loose Pulleys. Taper Roller Bearings Can also Be Provided Instead of Gun Metal Bushes.

the Cross Rail: this is of Box Section Type with Large Surface. It is Suitable for Both Hand and Mechanical Drive.

tool Posts: These are Manufactured Out of Close Grain Alloy Castings and Steel to Stand Heavy Cut. These Can Be Driven Both Manually and Mechanically.

the Uprights: the Uprights are of Rigid Box Section Type. Keysed Firmly, Bolted On to Bed and are Capable of Absorbing the Heaviest Shocks Without Vibraion, Extra Pins are Provided to Re-fit the Machine Acurately After Once It is Dismantled.

the Drive: the Machine is Arranged for Direct Individual as Well as Two Belt Drive

accessories: Automatic Lifting Arrangements of Cross Rail.

<b>Planer Machine Heavy Duty Double Column</b>

Sizeft. mm8' 243810' 3048 12' 365714' 426716' 487618' 548620' 609622' 670524' 731526' 792528' 853530' 9144
Length of Bed V'S ft. mm12' 3657 15' 457218' 548621' 640024' 731527' 822930' 914433' 1005936' 1097339' 1188742' 1280245' 13716
Length of bed all overft. mm13396216487719579122670525762028853431944934103643711278401219243131074614021
Stroke of tableft. mm82428103048123657144267164876185486206096226705247315267925288535309122
Length of table all overft. mm92743113553133962154572175181195791216401237010257620278230298840319449
Thickness of Tableft. mm7-1/21907-1/21907-1/2190922592259225922592259225922592259225
Planing Width ft. mm412194-1/21371515245-1/216766-1/419056-1/419056-1/219816-1/219816-1/219816-1/219816-1/219816-1/21981
Height under cross railft. mm4012194-1/213714-1/21371515245152451524515245152451524515245152451524
Cutting Speed P.Mft. mm401200040120004012000401200040120004012000401200040120004012000401200040120004012000
Return Speed P.M ft. mm551650055165005516500551650055165004513500451350045135004513500451350045135004513500
Method of driving planerBeltdrivenBeltdrivenBeltdrivenBeltdrivenBeltdrivenBeltdrivenBeltdrivenBeltdrivenBeltdrivenBeltdrivenBeltdrivenBeltdrivenBeltdriven
Method of driving tableRack & PinionRack & PinionRack & PinionRack & PinionRack & PinionRack & PinionRack & PinionRack & PinionRack & PinionRack & PinionRack & PinionRack & PinionRack & Pinion
H.P. Reco-ended57-1/210101015151520202525
Weight in M. Tons (Appox)81011161820222528303235
View Complete Details

Radial Drilling Machine

Our High Speed Radial Drilling Machine is the Outcome of the Latest Technological Advancement. Our Radial Drilling Machine is Easy to Install and Easy to Operate. Involving Less Maintenance Cost, the Machine is Highly Demanded in the Market. the Machine is Specially Designed for Heavy Duty Drilling and all Cast Parts are of fine Close Grained Grey Iron Casting Machined to Close Tolerance. Rigid Inspection At Each Stage of Production Ensures the Quality of the Products. Today, We are Reckoned as One among the Leading all Geared Radial Drilling Machine Suppliers Based in the Country.

Dimension Of Radial Drilling Machine

ModelFMT 40AFMT 40BFMT 50AFMT 5OBFMT 50CFMT 65BFMT 75
Drilling Capacity in Solid mild Street40mm40mm50mm50mm50mm65mm75mm
Drilling Capacity in Cast Iron50mm50mm60mm60mm60mm75mm85mm
Dia of column230255255310310355355
Drilling Radius minimum550375525450425650675
Drilling Radius maximum105095011251100132516001950
Machine height from floor2420242027602760276031703320
Distance from spindle nose to top of the base plate minimum Spindle in downward positionf5010075100100100100
Distance from spindle nose to top of the base plate minimum Spindle in upward position1000115012001300130016001750
Drilling depth180180225225225225325
Working surface of base plate885 x 545885 x 545975 x 655975 x 6551150 x 6551460 x 8451735X940
Dimensions of Base1470 x 705 x 1801470 x 705 x 1801645 x 835 x 2001645 x 835 x 2001755 x 835 x 2002370 x 1015 x 2102640 x 1110 x 210
Effective area of box Table330 x 330 x 330330 x 330 x 330550 x 400 x 400550 x 400 x 400600 x 450 x 450 600 x 450 x 450 600 x 450 x 450
No. of spindle speeds & Range (RPM.xSteps)45 - 660 X 6 steps45660 X 6 steps40 - 790 x 9 steps40 - 790 x 9 steps40 - 790 x 9 steps25-930 12 steps20-740 12 steps
No. of spindle feeds & Range (Per Rev.xsteps0.095 0.215 3 steps0.095 - 0.215 3 steps0.80 - 0.180 3 steps0.80 - 0.180 3 steps0.80 - 0.180 3 steps0.010 - 1.25 6 steps0.010 - 1.25 6 steps
Taper Spindle nose SocketMT4MT4MT5MT5MT5MT5MT6
Main Motor2 HP2 HP3 HP3 HP3 HP5 HP7.5 HP
Elevating Motor1 HP1 HP2 HP2 HP2 HP3 HP5 HP
Total Weight of Machine (apporx.) Kgs.1700 Kg2000 Kg2500 Kg3000 Kg3200 Kg4800 Kg6500
View Complete Details

Shaper Machine

Our Exclusive all Geared Shaper Machine is Manufactured with the Best Quality Raw Materials for Cent Percent Efficiency. the Entire Product Range is Durable and is Capable to Perform Any Function Under Any Circumstance. Our Shaper Machine is Available in Range like Cone Pulley Belt Shaper Machine and Many Others. the Products are Available in Different Dimensions and Designs So as to Suit the Specific Customers Needs. Today, We are Considered to Be One of the Major Industrial Shaper Machine Manufacturers in India.
View Complete Details

Pillar Drilling Machine

We Make Available to You a Wide Range of Pillar Drilling Machine that Accomplishes the Toughest of the Drilling Tasks in the Shortest Time Span. Our Heavy Duty Pillar Drilling Machine is Manufactured Keeping the International Standards in Mind. These Machines have Found a Number of Uses in Various Industries for Their Durability and Efficiency. We are Counted Upon as One among the Reliable Pillar Type Drilling Machine Exporters from the Country for the Timely Delivery of Our Products. the Products Come in a Number of Specifications to Meet the Specific Customers Needs.

SpecificationPillar Drill Machine  PSL - 40 X  &  40A
Tilting working tableFIXED
Drilling capacity40 mm
Pillar Diameter135 mm
Spindle nose to table distance495 mm
Distance from spindle nose to base distance1000 mm
Auto feed speed(applies to PSL-40A only) 0.04 or 0.08
Distance from spindle center to pillar surface380 mm ( MAX )
Table Travel500 mm
Taper in spindleMT - 4
Number of speed8 Speed
Range of Speed (RPM)60 to 2000
Table Size (in mm)490 x 490
Base size (Machined Area mm)820 x 490
Overall Base Size (in mm)825 x 495
Spindle Travel250 mm
Pillar Length1475 mm
Overall height with pulley guard1840 mm
V-Belt sectionB - 74"
Weight (Approx.)500 kg.
Motor1440 RPM 3 Phase440 volts2 HP
Shipping Wooden Case  Inner Size LxWxH1200x540x1880 mm
View Complete Details

Vertical Boring Machine

We are Specialized in the Manufacturing as Well as Supplying of Heavy Duty Vertical Boring Machine in the Industry. the Portable Vertical Boring Machine, We Deal in are Accessible in Seven Different Ranges. They have Numerous Applications like that of Drilling Into the Vertical Direction of the Earth. These Vertical Boring Machines are Remarkable for Its Non Stop Functioning for Considerably Longer Period of Time. Besides, You Can Avail These Boring Machines At Much Discounted Rates. in Addition to This, We are One of the Most Reliable Industrial Boring Machine Suppliers in the Industry.

vetical Boring Machinespecifications
we Offer Very Reasonable Prices for Our Products. We have Many Different Kinds of Vertical Boring Machines Used in Many Different Applications.these Vertical Boring Machines are Very Useful for Industrial Purpose. We Offer Very Reasonable Prices for Our Products.

ParticularsFMT-1FMT-1.5FMT-2FMT-2.5FMT-3FMT-4FMT-5
Table Diameter (mm)1000150020002500300040005000
Max. Turning Dia with side Head below the Table Top (mm)1260176022602800350045005800
Max. Turning Dia with side Head in woring position (mm)1060156020602600330043005500
Max. Working height under Cross Rail (mm)1000125015002000225022502500
Max. Working Travel of Turret Head/Ram Head (mm)500600850850100012501250
Swivel Angle of Ram Head (Degree)30303030303030
Horizontal Travel of Side Head (mm)500600850800100010001250
Table Speed (RPM) 10/1008.5/855/502/201.5/1515/151/10
Feeds Horizontal & Vertical (No.)6666666
Range (mm/min )0.3/2.30.3/2.31/6.51/6.51/6.51/6.51/6.5
Rapid Travels of Heads & Cross Rail mm/min 300300300300300300300
Total H.P 15/2520/3025/403/5040/6040/6050/70
Approx. Weight of the Machine with two Heads (K.G)12 tons15 tons21 tons25 tons35 tons45 tons55 tons
View Complete Details

Surface Grinder Machine

We are offering surface grinder machine. We are the leading manufacutre of hyudralic surface grinder machine(2000 * 375)mm.
View Complete Details

Lathe Machine

We Manufacture An Exclusive Range of Heavy Duty Lathe Machine that is Manufactured with Maximum Accuracy and Minimum Tolerances. the Automatic Lathe Machine is Suitable for Single and Mass Production Work. the Improved Designed Machine is Well Finished in all Respects So as to Give High Precision Accuracy. These are Designed for Individual Drive as Well as Counter Shaft Drive in Order to Meet the Present Day Demand of all Classes of Industry. the Lathe Machine is Available in a Number of Sizes So as to Meet the Specific Requisites of the Customers. Today, We are Reckoned to Be One of the Major Lathe Machine Manufacturers in India.

Specifications

ModelSL-260SL-305SL-380SL-460
Length of Bed (Feets)6 10 1/21220
Center Height (inch)10 ½121520
Width of Bed (inch)13151822
Swing over Bed (inch)21243040
Swing over Cross Slide (inch)13171829
Swing in Gap (inch)31364659
Admit Between Centers (inch)368496180
Spindle Bore (inch)22 5/83 1/84 1/8
Dia of Lead Screw (inch)1 ½1 5/822 ½
Dia of Face Plate (inch)12162236
H.P Recommended2357.5
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Ankush Mahajan (Fasto Machine Tools)
  • 15-a Industrial Estate, Batala, Punjab - 143505
  • Share us via
  • Call 08068051312 Ext. 313