Our Centrifugal Oil Cleaner (CK600). CK- 600 is used for tank capacities from 1000 liters to 4000 liters. It can separate the finest particles upto 1 micron from the oil.The Filtek Centrifugal Oil Cleaner model CK600 is a self contained skid powered by an 80 LPM pump+motor to clean neat cutting fluids as well as water based coolants of industrial machines such as Honing, Reaming, Grinding, Tool & Cutter, Component washing etc and is extremely effective in removing the metal dust contamination and ingressed dust particles ranging between 1 micron and 5 microns. The Centrifuge being a cleanable unit has no consumable parts.

The inlet to the centrifuge is taken from the fluid tank and drained back to the tank through the Filtek Centrifuge

Filtek FT Centrifuges are used successfully on Bio Diesel Manufacturing Systems for fine filtration of biodiesel. All contamination as well as wax and gummy insolubles are effectively removed

IMPURITIES IN OIL

With increasing frequency, utility owners and operators are experiencing a significantly increased need for oil handling and treatment requirement.
Any boiler's capability to burn commercial grades of Heavy Fuel Oil is dependent on the fuel characteristics and the level of contaminants in the fuel.
As fuel grade and quality decrease, the resultant impact on the burners operating reliability and economics will be strongly influenced by the ability of fuel handling systems available to provide properly treated fuel.
Insolubles in the Thermic fluid can cause havoc with the performance of the system, even leading to choking of the complete system.
This is one of the major reasons for discontinuing the use of Thermic fluid - the presence of percentage insolubles of more than 1%. Maximum particle size going into the system for combustion would be 125 microns, which would be the maximum for a 120 mesh filter can screen. The particles below 125 micron are the main cause of wear of burner nozzles in, thus causing decrease in combustion efficiency.
Analysis shows that a maximum percentage of impurities in sediments are in the range of 0.25 to 100 microns, which is way below the capacity of any normal mesh filtration system.
Due to routine maintenance required for cleaning, large number of man hours spent on this activity.
Wastage o