Aestech Bricks Industries Sri Ganganagar, Rajasthan

When the coal burns inside the boiler completely, some of the fine particles such as talcum powder is carried out of it. Those fine particles are called ‘ Fly Ash ’. We make use of advanced devices such as Bag Houses, FGD Systems, Electrostatic Precipitators, etc., we remove the Fly Ash particles from the stacked gases, which are further collected for recycling purposes. We offer the Fly Ash that are heterogeneous glassy substance consisting of silicon, iron, magnesium, silica, calcium and alumina, which in presence of water will combine chemically with the aid of traces of lime that is present in fly ash, to obtain cementitious properties (pozzolan). Our Fly Ash is also high in calcium compounds, which give them a self-hardening property, whenever mixed with water. Some chemical analysis will also depict the Fly Ash compounds to be present as oxides of the chemicals, of which it is made of. However, these compounds occur as aluminosilicate glass interspersed with a small fraction of crystalline compounds, like magnetite, quartz, hematite, mullite, and elemental siliceous or aluminosilicate glass. We offer Class F Fly Ash It is produced from the burning of anthracite or bituminous coal It contains silica, aluminum and iron in combinations of greater than 70% Class C Fly Ash It is produced from the burning of lignite or subbituminous coal It generally contains more calcium and less iron with its lime (CaO) content in the range of 15% to 30%. It is cementious in addition to pozzolanic.

We are counted among the reliable Suppliers of Bottom Ash . The vendors, with whom we have business link-ups, process the Bottom Ash using tested methods. We have the technical support, which helps us to sell a fully processed and ready to use Bottom Ash to the Block Producer. We have processing machinery that helps in removing the soft and friable aspects of the Bottom Ash. We are well-aware with the concept of aggregate production and use concrete block mix designs and block manufacturing process to give the clients fully processed Bottom Ash. We sell the Bottom Ash for constructing both heavyweight and lightweight materials. Our team of quality experts fully examines the Bottom Ash and checks it against diverse quality parameters. Our aim is to optimize the clients̢۪ revenue and minimize the disposal cost. Application Used as ice control material Septic tank drain field Aggregate for concrete and concrete products

We are a credible Supplier of Cenosphere . The Cenosphere are hollow glass particles and are also known by the name hollow ceramic spheres, microspheres and glass beads. Known for their unique combination of controlled sizing (prior to processing), spherical shape, exceptional strength in uniform compression, high acoustical and thermal insulating and dielectric properties. These properties of the Cenosphere make them most suited raw materials for preparing high value applications. In addition, we offer reliable marketing and development Services of diverse Cenosphere Applications. The small amount of Cenosphere material may have high market value if its production remains constant over a long period of time. General Physical Features 20m-200m in diameter and are spherical, coherent, non-porous shells of silicate glass The thickness of the shell is about 10% of the radius The floating spheres are usually collected from lagoons True particle densities of the individual sphere range from 0.40-0.60 gm/cc, and their bulk densities are ~0.25-0.40 gm/cc The Cenospheres break down on heating to 300 o C, which indicates release of water dissolved inside the glassy material. The hollow spheres start to sinter at 1200 o C and usually collapse above 1300 o C. The cenospheres are formed at an estimated temperature of 1400 o C and the formation and size are governed by the viscosity and surface tension of the fused silicate glass, by the rate of change in particle temperature and by the rate of diffusion of gases in the silicate. The molten spheres harden at 1000 o C, trapping the gases which are formed internally through catalytic action of Ferric Oxide (Fe 2 O 3 ), or carbonaceous material present The gas inside the Cenospheres consists mainly of CO 2 and N 2 . At room temperature, their internal pressure is about 0.2 atmospheres. Applications Filler for paints and varnishes Lightweight mineral fillers in composite polymeric materials of different kinds such as : cryogenic technology; fabrication of acoustic and thermal insulating materials Mineral filler applications in ceramics provide many exciting possibilities as well Fabrication of polymeric composites that focus on special properties for electronics and electrical engineering and additional applications Fabrication of composite polymeric putties (automobile, for example) and compounds for filling in technological surface defects

The Fly Ash Brick is derived after properly mixing the Fly Ash with two ingredients lime and gypsum, which are present in chemical plants. Such a process is the best to produce the Fly Ash Brick, since it requires practically zero energy. We cater to the bulk quantities of Fly Ash Bricks, which come in a uniform shape. Attributes Size 230x110x70mm Compression Strength more than 75 kg /sq.cm. 10% lighter in weight than conventional clay bricks Cost effective Conforming to IS 12894 More durable with passage of time Uniform in shape Less mortar consumption & savings in plastering cost Water absorption within permissible limits