This is a single piece high strength corrosion resistant aluminum alloy collar having the same features as Type G44 & G45 .

GAURAV Semi-rigid bow centralizer withstands high lateral loads and is specially designed with double crested bow profile which enable these to be compressed through tight spots and severe dog legs where low starting / running forces combined with very high centralization forces are required.  These Centralizers combine the features of a standard spring bow and rigid centralizer; bows are manufactured from heat-treated alloy steel and a non- weld design eliminates brittle spots; and attains a higher stand-off due to its higher restoring force.  This design increases contact area for less bow penetration into the formation and aids in complete mud removal while cementing. A choice of different standard bow heights makes possible the configuration for any hole dia.  These are available in all sizes ranging from 3-1/2” to 20”.

This economical collar is suitable for sub-critical annular tolerances and is capable for a holding force upto 1000% of the centralizer starting force as per API-10D.  It features specially designed collar hinges which wrap to the inside and hinge pins that do not work loose. This device can be latched on to the casing pipe without having to be slipped on at the end of the casing pipe, thus allowing easy installation.  Available in the size range 2-7/8” to 30”, it has a single bolt locking mechanism, located at 180 degrees to the hinge, which is used to tighten the collar to the casing.    

• TypeDry
• ApplicationCookery, Food, Snacks
• TasteCrunchy, Sweet
• Packaging TypePacket, Jute Bag
• FeatureAir Tight Packaging, Good Taste, Rich In Calcium
• Packaging Size10kg, 1kg, 20kg, 5kg\

• SpecialitiesCost Effective, Rust Proof, Durable, High Performance
• TypeAluminium Composite Sheet
• MaterialAluminium
• ShapeRectangular
• ColorGray
• PatternPlain
• FinishingPolished

This is a hinged collar featuring double coiled hardened & tempered steel wire bristles to remove mud cake and improve bonding. These are mounted on the casing between stop collars or between a casing collar and a stop collar and are available in the size range 2-3/8” to 20”.

• TypeAlmond Nuts
• ApplicationMilk, Sweets
• TasteCrunchy
• FeatureAir Tight Packaging, Good Taste, Rich In Protein, Vitamin, Good Quality
• Packaging Size1- 5kg, 5 -10kg , 10-20kg,
• Packaging TypeVacuum Bag, Jute Bag

GAURAV Non-Weld Turbolizer induces a spiral flow of the fluid increasing the displacement efficiency. Specially designed multi-directional steel turbo fins, available as left hand or right hand, are fitted on to High Quality Alloy Steel Bow Spring that are heat treated under controlled conditions.  These Centralizers improve the cleaning action of drilling fluids, distribute the cement slurry into wellbore irregularities and minimizes channeling effect. These Turbolizers can be shipped in half-assembled condition for economy in shipping and storage costs and easy on-site assembly. Five standard bow heights make it easy configuring the Centralizer for any combination of Casing Size and Hole Dia.  These are available in size range from 4-1/2” to 20” and can also be provided with double turbo fins fitted on each bow at both ends in opposite orientation.

• TypeMace Javitri
• ApplicationIndustrial, Massage
• Shelf Life1 Year, 2 Year, 6 Months
• ColorBrownish, Orange, Yellow
• FormWhole
• Packaging TypeBottle, Plastic Can
• BenefitBoost Blood Circulation, Keep Your Digestive System Healthy
• AromaBright, Spicy, Warm
• Packaging Size1kg, 2kg, 3kg, 4kg, 5kg

AURAV ASSOCIATES  manufacture the  GAMA  range of  Mud Agitators . These Mud Agitators  are used for agitating mud slurry for obtaining consistency through proper blending in flow controlled applications. GAMA Mud Agitators  have been designed keepingin mind the oilfield's most severe mud mixing conditions at any weight. It's rugged and sturdy design requires lower maintenance.  GAMA Mud Agitators  are highly energy efficient. GAMA Mud Agitators  increase performace of solids removal equipment, maintain uniform mud density and prevent solids setting. GAMA Mud Agitators  have compact design and their low profile reduces headroom requirements providing more layout space on top of the tanks for other equipment. The low center of gravity ensures stability and safety should sudden shock loads be encountered by the Impeller. GAMA Mud Agitators  can be provided with either a worm gear or a helicalbevel gear reducer; both are field tested in demanding conditions and have proven reliability and dependability. The operation is smooth, quiet and vibration-free. GAMA Mud Agitators  are available in Eight models ranging from 1.5 to 30 Horsepower. Impellers range from 20" to 52" and are available in AIr-o-foil, Canted, Flat or Turbine blade design. The Air-o-foil design promotes axial as well as radial flow and ensures all fluid is mixed continuously and the same fluid consistency is maintained in all parts of the tank. This design provides homogenous mixing over a wide spectrum of installations and assists in eliminating troublesome heavy slugs or light spots. Flat Implellers provide adequate radial agitation and may beused on tanks shallower than 5 feet or as a bottom impeller in a two impeller installation in very deep tanks. 

GAURAV Semi-rigid bow centralizer withstands high lateral loads and is specially designed with double crested bow profile which enable these to be compressed through tight spots and severe dog legs where low starting / running forces combined with very high centralization forces are required.  These Centralizers combine the features of a standard spring bow and rigid centralizer; bows are manufactured from heat-treated alloy steel and a non- weld design eliminates brittle spots; and attains a higher stand-off due to its higher restoring force.  This design increases contact area for less bow penetration into the formation and aids in complete mud removal while cementing. A choice of different standard bow heights makes possible the configuration for any hole dia.  These are available in all sizes ranging from 3-1/2” to 20”.

This is a hinged collar featuring double coiled hardened & tempered steel wire bristles to remove mud cake and improve bonding. These are mounted on the casing between stop collars or between a casing collar and a stop collar and are available in the size range 2-3/8” to 20”.