Global Vertex

Member Since : 2013 | Singapore

Products


  • Expanded Metal Plates

    Expanded Metal Plates

    Expanded Metal Expanded metal is a form of metal stock made by shearing a metal plate in a press, so that the metal stretches, leaving diamond-shaped voids surrounded by interlinked bars of the metal. The most common method of manufacture is to simultaneously slit and stretch the material with one ...

    Send Inquiry »

  • Rectangular Hollow Section Pipes

    Rectangular Hollow Section Pipes

    Rectangle (RHS) Rectangular Hollow Sections are commonly used in welded steel frames where members experience loading in multiple directions.   Product Description Size : 19 x 9mm to 400 x 300mm Wall Thickness : 1.0mm to 16.0mm Weight : 0.401kg/m to 163.00kg/m

    Send Inquiry »

  • Square Hollow Section Pipes

    Square Hollow Section Pipes

    Square (SHS) Square hollow sections are often used for columns, however similarly to RHS sections, they are not often used as beams due to its shape that makes it difficult to bolt to other beams and vice versa.   Product Description Size : 12 x 12mm to 400 x 400mm Wall Thickness : 1.0mm to ...

    Send Inquiry »

  • Steel Equal Angles

    Steel Equal Angles

    Angle Bar Equal Angle bar equal can be composed into different bearing components with different structures, it can also be used as joint pieces between the components. It is mainly used in a variety of construction structure and engineering structures such as factory, bridges and vehicles as large ...

    Send Inquiry »

  • Steel Unequal Angles

    Steel Unequal Angles

    Angle Bar Unequal Angle bar unequal is angled steel with different side length. Main application of large type angle bar unequal is mainly for workshops, bridges and vehicles; middle type angle bar unequal is used in construction structure and iron stand, and small angle bar unequal works as ...

    Send Inquiry »

  • Seamless ERW Steel Pipes

    Seamless ERW Steel Pipes

    API ERW & Seamless ERW (Electric Resistance Welded) Pipes are welded pipes where only the edges are heated, thereby creating a more accurate surface. By doing so, pipes up to 0.4m diameter could be achieved more economically. They are used in various engineering purposes, such as agriculture and ...

    Send Inquiry »

  • Carbon Steel Pipes

    Carbon Steel Pipes

    Carbon Steel Pipe Carbon steel pipe has a wide range of uses. For example, it is used for low pressure conveyance of gas, water, oil, air steam or other fluids. It is also used in machinery, buildings, sprinkler systems, irrigation systems, and water wells. Product Description Nominal Size - 15mm ...

    Send Inquiry »

  • Steel U Type Channels

    Steel U Type Channels

    Channel Bar Channel bar is a channel shape with inside radius corners that is ideal for all structural applications where greater strength and superior corrosion resistance is required. Widely used for all types of fabrication projects that are exposed to the elements  chemical, acidic, fresh ...

    Send Inquiry »

  • Steel Chequered Plates

    Steel Chequered Plates

    Chequered Plate Chequered plates are used in many fields, the most popular being tread plate. The new and modern use is as architectural metal materials used in wall and ceiling cladding. It is also used as decoration and protective sheets in some designs of doors, chairs, furniture and industrial ...

    Send Inquiry »

  • Steel Deformed Bars

    Steel Deformed Bars

    Deformed Bar Deformed bar, also known as rebar (short for reinforcing bar), is a steel bar or mesh of steel wires used as tension devices in reinforced concrete and reinforced masonry structures to strengthen and hold the concrete in tension. Deformed bars surface is often patterned to form a ...

    Send Inquiry »

  • Steel Flat Bars

    Steel Flat Bars

    Flat Bar Steel flat bar is widely used for all general fabrication and repairs in industrial maintenance, agricultural implements, transportation equipment, etc.   Product Description Section Size : 3 x 12mm to 25 x 300mm Weight : 0.283kg/m to 58.90kg/m

    Send Inquiry »

  • Steel Imperial Beams

    Steel Imperial Beams

    Imperial Beams Wide Flange Steel Beams, aka W Beam or H Beams, measured in Imperial (inch-pound) units.   Product Description Size : 102 x 102mm to 914 x 305mm Flange Thickness : 8.76mm to 34.54mm Web Thickness : 7.11mm to21.08mm Weight : 19.35kg/m to 313kg/m Depth : 105.7mm to 913.9mm Width : ...

    Send Inquiry »

  • Steel Lipped Channels

    Steel Lipped Channels

    Lipped Channel (Purlin) Lip channels are predominantly used as a structural component when erecting or constructing buildings and structures. This has also lead to lip channels quite often being referred to as purlins. Though this may be the main use, cold formed steel lip channels are used for ...

    Send Inquiry »

  • Steel Metric Beams

    Steel Metric Beams

    Metric Beams Wide Flange Steel Beams, aka W Beam or H Beams, measured in SI (metric) units.   Product Description  Size : 100x 50mm to 900 x 300mm Flange Thickness : 7mm to 37mm Web Thickness : 5mm to 19mm Weight : 9.30kg/m to 307kg/m Depth : 100mm to 918mm Width : 50mm to 303mm

    Send Inquiry »

  • Steel Plain Plates

    Steel Plain Plates

    Steel Plate and Sheet Steel Plate/Sheet is a structural quality steel plate used for a large variety of general construction and industrial applications.   Product Description Thickness : 1.2mm to 100mm Dimension : 4˛ x 8˛ to 8˛ x 20˛ Weight : 0.875kg/ft to 72.930kg/ft

    Send Inquiry »

  • Steel Round Bars

    Steel Round Bars

    Round Bar Steel Round Bar is a hot rolled, mild steel solid steel bar that is ideal for all general fabrication, manufacturing and repairs. They are widely used in industrial maintenance, agricultural implements, transportation equipment, ornamental iron work, fencing, artwork, etc.   Product ...

    Send Inquiry »

  • Steel Ship Plates

    Steel Ship Plates

    Ship Plate Steel ship plates are used in the cabin structures of cruise ships. The especially thin but wide plates are used for such applications to offer the best processing properties such as flatness and weldability. In contrast, high-strength, thermomechanically rolled ship plates are used in ...

    Send Inquiry »

  • Steel Square Bars

    Steel Square Bars

    Square Bar Square Bar is widely used throughout the fabrication industry: frame work, braces, trim, shafts, axles, fittings, instruments, gym equipment, awnings, structures, and more.   Product Description Size : 8mm to 160mm Section : 0.64cm to 256cm Weight : 0.502kg/m to 201kg/m

    Send Inquiry »

  • Welded Steel Pipes

    Welded Steel Pipes

    Welded Pipe Welded pipe is an electric welded round pipe that is an alternative to steel pipes. It is a structural grade tube that is suitable for a wide variety of applications where dimensional accuracy and precision tolerances is not a primary concern.A raised weld seam is present inside the ...

    Send Inquiry »

Promote this Page


Search



Contact Details

Ms. Renajit (Rena)

Blk – 305, Shunfu Road No. 06-101, A, - 570305, Singapore

Mobile Phone : +65-91458690