Owing to the tapered running face the Taper Faced Compression Ring touches the cylinder bore with its bottom outer edge. This shortens running-in and improves oil scraping. The gas forces acting initially at the running face provide a degree of pressure relief (especially when usmore...
A compression ring with only the top side tapered. Like on the keystone ring, the tapered side (keystone angle 7°) causes the axial clearance to vary as the ring moves radially and thus, reduces ring sticking. Owing to its asymmetrical cross section, the ring has a positive twismore...
This ring is used mainly in small 2-stroke gasoline engines as a "head land" ring, the vertical arm of the L being flush with the top edge of the piston crown. With gas pressure acting behind the vertical arm, this ring will also seal when in contact with the top side of the pistmore...
Proving Rings, Compression Proving Rings (AIM 261 TO AIM 281), Tension Proving Rings (AIM 290 To AIM 298) & Tension Compression Proving Ring (AIM 284) The Proving Rings are made up of special steel, carefully forged to give maximum strength and machined to give high sensitivitmore...
The company is one of the well-known Manufacturers and Exporters of Compression Piston Rings in Ahmedabad (India). The top Compression Rings is present in the first ring grooves. The Compression Piston Rings, offered by the company, has the primary function of sealing the combustmore...
A compression ring with a wedge cross section. With its tapered sides, radial movement of the ring in engine operation will cause the axial clearance in the groove to increase and decrease. This greatly reduces ring sticking, as the ring continuously works its way free of the commore...
A compression ring with only the top side tapered. Like on the keystone ring, the tapered side (keystone angle 7°) causes the axial clearance to vary as the ring moves radially and thus, reduces ring sticking. Owing to its asymmetrical cross section, the ring has a positive twismore...
We make available Rectangular Compression Ring with a rectangular cross section. This Rectangular Compression Ring with its geometrically simple shape performs the necessary sealing functions under normal operating conditions. With a peripheral coating and appropriate barrel facemore...
This ring is used mainly in small 2-stroke gasoline engines as a "head land" ring, the vertical arm of the L being flush with the top edge of the piston crown. With gas pressure acting behind the vertical arm, this ring will also seal when in contact with the top side of the pistmore...
By providing an edge relief on the top side of rectangular and taper faced rings a twist effect is achieved which, in all operating phases without gas pressure loading, brings the ring into bore contact only with its bottom outer edge while the inner edge contacts the bottom groomore...
For Buyer 
For Seller 
Help 
