Post Buy Requirement
GI
Mumbai, Maharashtra, India
Verified Add Review

Other Products / Services #389511

Condenser Shell

  • range 5TR to 400 TR
Condenser shell are available in different capacity ranging from 5TR to 400 TR.A shell and tube condenser (heat exchanger) is the most common type of heat exchanger used in refrigeration industry. Shell and Tube Condensers are having two divisions one is shell and other is Tubes. Here water runs through the tubes, and ammonia vapor flows over the tubes (through the shell) to transfer heat between the two fluids. For this purpose seamlessERW or Rolled shell are used for shell. And SeamlessERW tubes are used for Tubes.
View Complete Details

Ice Cans

We are one of the leading manufacturer supplier and exporter of ice cans in India since 1982. The Ice cans are made from 16 gauge Galvanized Iron sheet (1.53mm – 1.55mm. thick). The M.S. Ring is riveted at the top of the can in which holes for lifting pins are made. The ring reinforces the top and prevent it from damaging and to further reinforce the cans from sides. These cans are made with single or double groove at the sides depending upon the size to make the cans sturdy and long lasting.

These Ice cans are available in standard sizes of 50 lbs, 100 lbs, 200 lbs, 300 lbs, 400 lbs & 500 lbs, but we can also offer our clients, an array of ice cans of different size and standard that is designed in compliance with international quality standard.

The smooth construction of these ice cans with slight taper towards the bottom enables the ice block thawing very easily. Each ice cans is strictly tested for leaks so it ensures a leak proof service.

View Complete Details

Brine Agitators

We manufacturer two different models of Brine Agitator.
MONO BLOCK / COUPLED BRINE AGITATOR
Made up of heavy duty M.S. Pipe in which a 1½” (38 mm.) shaft is fitted with gunmetal bush at both ends or taper rolling / ball bearing as required by the customer. These agitators are fitted with 14” Dia. C.I. Impeller/ Fan and the capacity of the agitator can be varied by changing the degree of Impeller/ Fan blades.
 
V BELT DRIVEN BRINE AGITATOR

Made up of heavy duty M.S. Pipe in which a 2" (50 mm.) Shaft is fitted. The shafts has gunmetal bush at the fan end and taper roller bearing at the pulley end and are fitted with various sizes of C.I. fan / impeller. i.e. 8”, 12”, 16”, 18” & 20” according to capacity of the ice plant.

 
These agitators come in different models suitable for various depths of tank or as per customer requirement.
 
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Jasvinder Singh/ Gurudev Singh (Gurdev Icecans Refrigeration Industries)
  • 20, Rainbow I.e., Opp.seepz, B/h.floral Deck Plaza, Midc, Andheri (e),, Andheri East, Mumbai, Maharashtra - 400093
  • Share us via
  • Call 08068051313 Ext. 991
List of Other Products by Gurdev Icecans Refrigeration Industries from Mumbai, Maharashtra.
Post Buy Requirement
GI
Mumbai, Maharashtra, India
Verified Add Review

Other Products / Services #389511

Condenser Shell

  • range 5TR to 400 TR
Condenser shell are available in different capacity ranging from 5TR to 400 TR.A shell and tube condenser (heat exchanger) is the most common type of heat exchanger used in refrigeration industry. Shell and Tube Condensers are having two divisions one is shell and other is Tubes. Here water runs through the tubes, and ammonia vapor flows over the tubes (through the shell) to transfer heat between the two fluids. For this purpose seamlessERW or Rolled shell are used for shell. And SeamlessERW tubes are used for Tubes.
View Complete Details

Ice Cans

We are one of the leading manufacturer supplier and exporter of ice cans in India since 1982. The Ice cans are made from 16 gauge Galvanized Iron sheet (1.53mm – 1.55mm. thick). The M.S. Ring is riveted at the top of the can in which holes for lifting pins are made. The ring reinforces the top and prevent it from damaging and to further reinforce the cans from sides. These cans are made with single or double groove at the sides depending upon the size to make the cans sturdy and long lasting.

These Ice cans are available in standard sizes of 50 lbs, 100 lbs, 200 lbs, 300 lbs, 400 lbs & 500 lbs, but we can also offer our clients, an array of ice cans of different size and standard that is designed in compliance with international quality standard.

The smooth construction of these ice cans with slight taper towards the bottom enables the ice block thawing very easily. Each ice cans is strictly tested for leaks so it ensures a leak proof service.

View Complete Details

Brine Agitators

We manufacturer two different models of Brine Agitator.
MONO BLOCK / COUPLED BRINE AGITATOR
Made up of heavy duty M.S. Pipe in which a 1½” (38 mm.) shaft is fitted with gunmetal bush at both ends or taper rolling / ball bearing as required by the customer. These agitators are fitted with 14” Dia. C.I. Impeller/ Fan and the capacity of the agitator can be varied by changing the degree of Impeller/ Fan blades.
 
V BELT DRIVEN BRINE AGITATOR

Made up of heavy duty M.S. Pipe in which a 2" (50 mm.) Shaft is fitted. The shafts has gunmetal bush at the fan end and taper roller bearing at the pulley end and are fitted with various sizes of C.I. fan / impeller. i.e. 8”, 12”, 16”, 18” & 20” according to capacity of the ice plant.

 
These agitators come in different models suitable for various depths of tank or as per customer requirement.
 
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Jasvinder Singh/ Gurudev Singh (Gurdev Icecans Refrigeration Industries)
  • 20, Rainbow I.e., Opp.seepz, B/h.floral Deck Plaza, Midc, Andheri (e),, Andheri East, Mumbai, Maharashtra - 400093
  • Share us via
  • Call 08068051313 Ext. 991