Hme sleeper laying machine slm. part of mechanised railway track construction. This machine lifts 20 sleeper simultaneously using its hydraulic lifting beam then travels to the site and lays down the sleepers 20 numbers simultaneously equally spaced and parallel to one another as per railway standards

We are into manufacturing and supplying of Hydraulic Track Lifting and Slewing Machine. Our Hydraulic Track Lifting and Slewing Machines are used for lifting, leveling and slewing of all kinds of tracks and turnouts. The Hydraulic Machine is heavy duty, which can be used to support even the unopened concrete tracks with minimum efforts. The machine is available with us at modest prices. Furthermore, we assure timely delivery of all our products.

We are one of the most prominent Manufacturers and Suppliers of Hydraulic Gantry System . Our Hydraulic Gantry System is manufactured from the best quality metal using the latest technology. Our Gantry System is used at places where traditional cranes do not fit. The Hydraulic System is used in nuclear and fossil power applications. We offer our Hydraulic Gantries at reasonable prices. We are capable of delivering small as well as bulk orders.

• Driven TypeElectric
• Heat ResistantYes

We are prominent Manufacturer and Supplier of Hydraulic Grip Puller . Our Hydraulic Grip Puller is made from high-grade metal using the latest fabrication techniques. Our Hydraulic Gripping Machine comes with safe cage design, which helps in better gripping of the surfaces. The Hydraulic Gripper is less time-consuming and is safer than the traditional methods of hammering, prying or heating. We offer the Grip Puller at reasonable prices.

We bring forth an exquisite assortment of Railway Track Inspection Trolley . Our Railway Track Inspection Trolley is made using high grade metal and is fabricated using latest technology. The Railway Trolley is best suited for lifting heavy-duty items and rail wagons. Our Railway Inspection Machine is precisely engineered, corrosion-resistant and durable. Moreover, the Track Inspection Trolley is very affordable. Buyers can purchase the trolleys from us in different models. Features: Compact size Superior finish Sturdiness  

• Driven TypeElectric
• Heat ResistantYes

We are into manufacturing and supplying of Hydraulic Track Lifting and Slewing Machine. Our Hydraulic Track Lifting and Slewing Machines are used for lifting, leveling and slewing of all kinds of tracks and turnouts. The Hydraulic Machine is heavy duty, which can be used to support even the unopened concrete tracks with minimum efforts. The machine is available with us at modest prices. Furthermore, we assure timely delivery of all our products.

We are a well-known Manufacturer and Supplier of Hydrostatic Motor Trolley . Our Hydrostatic Motor Trolley is made from the best quality metal using the latest technology. The Hydrostatic Trolley consists of forward and reverse brake lever, hydraulic oil tank and petrol engine. We offer our Hydrostatic Motor Machine at reasonable prices. We maintain huge stock of the machines so as to meet the varied requirements of the buyers.

spot tamping machine with all functions    performs all function of a full fledged tamping machine to ensure track geometry is corrected, most tamping machines use a two chord lining system (one for vertical alignment and one for horizontal alignment). The two chord system requires three reference trolleys fitted to the machine - usually called a point, b point and c point. Some machines will use a fourth point between b and c to carry out quality control measurements.   a point is always the front reference point and sits on uncorrected track. The anchorage for chords on a point are able to move to compensate for defects in track geometry - this is done by the "tower" operator. Depending on the chord system, the anchorages will be either a wire anchor or a light source.   b point is positioned as close as physically possible to the lifting lining unit. B point is used by the machine control system to position the track correctly using either potentiometers or optical filters, depending on type of chord system used.   c point is the rear-most measuring point and anchorage point for lifting and lining chords. Depending on type of chord system c point will be either wire anchor with a tensioning cylinder or a photoelectric light receiver.   all three points are individual rail trolleys able to freely move up, down, left and right independent of the machine chassis and hence follow any minor fluctuation in rail position. When working, the machine uses pneumatic cylinders to lightly push these trolleys into the selected datum rail both vertically and horizontally.   when using this method, the tower operator positions a point anchorages according to existing track geometry measurements taken beforehand. Once a point has been positioned, it is then assumed that both a and c are in correct position as if machine were sitting on corrected track. The machine then uses the lifting lining unit to move the rail and b point in line with a and c.   tamping units   system 7 fully hydraulic tamping head the tamping units of most tamping machines will consist of:   a set of tines either 8 or 16 per sleeper divided evenly between front and rear of sleeper mounting or "guide" rods that allow the unit as a whole to move up and down in a linear motion support frame squeezing arms tine mounts, can be either part of the squeezing arm or attached to it via a pin to allow swiveling depending on type of tamping machine to generate the vibration needed for penetration and consolidation there are two leading methods commonly used:   using a hydraulically driven eccentric shaft attached either to the end of the squeezing cylinders or acting as the pivot point for the squeezing arms using a special squeezing cylinder and valve assembly to oscillate the tines a less common method more often seen on tamping head attachments for excavators is to use a motor driven vibrator assembly that is directly bolted to the support frame.

We provide hi-tech Hydraulic Sleeper Laying Machine that is manufactured using the latest technologies. The Hydraulic Sleeper Laying Machine that we manufacture is appreciated by the clients for its high efficiency and durability. Sleeper Laying Machine offers excellent performance and is in high demand. We are reckoned to be one of the budding Manufacturers and Suppliers of Hydraulic Sleeper Laying Machine in India. Functions Grip 20 alternate sleepers from a bunch of 40 sleepers placed on rails centrally between the anxiliary track of 3400mm gauge Lift twenty sleepers simultaneously Lock 20 sleepers at 600 CTRS Transport the lifted, spaced sleepers at optimum speed and lay these at the remote site The machine will travel on an auxillary track of 3400mm gauge and cross level 0-0, for accurate laying of sleepers The lifting and carrying arrangement is non-sway type and all operations are executed by the operator hydraulically Used For construction of new tracks safely and efficiently with minimum workmen Requirements To Operate The Hydraulic Sleeper Laying Machine An auxillary track of 3.4 meter gauge is laid matching the centre line of the new track An unloading base is designated for incoming sleepers on dedicated 40 sleeper trailers The base should have auxillary track such that the incoming trailers can go within the aux track for unloading by this machine with specially designed beam structure arrangement The beam structure is used to grip, release, space, anchor and tighten alternate sleepers on to its body Specially designed hydraulic cylinder and steel wire rope arrangement Highlights The can be dismantled, shifted to new work site and assembled Each assembly shall can be placed in a lorry (2300 widex6000mm long) and can be transported Crane not required Save time and tedious work to operate the machine Robust Excellent performance   Specifications Lifting capacity(SWL) 9000Kg Travelling speed(Hyd. Motors) 20Kmph.(Max) Lifting Beam SWL 7000kg. Auxillary Track Gauge 3400mm. Auxillary Track Cross Level +/- 5mm. Max. Working Pressure Lifting 160bar Max. Working Pressure Travel FEW-REV. 160bar Max.system operating Temperature 82 deg.C. Oil Tank volume 220 Ltrs. Structures Fabricated from std.steel sections, Spares-alloy steels, heat treated as per functional loads. Wheels Alloy steel castings heated treated at tread, Wire rope Std. alloy steel (FS-3.5), All rotating parts on roller/ball bearings as per load ratings. Painting of structures 1st. coat -oil primer, 2 coats of oil paints color yellow. Fastners all fastners shall be high tensile steel /Unbrako/TVS grade 8.8-12.9. Controls 3 lever Hydraulic directional control valve for 1.Lift Cylinder 2.Travel 3.Sleeper gripping. Prime Over Diesel Engine-Assembled, Leyland, vertical, water cooled. Warrantly -one year. Oil Cooler Reservoir cross tubes, Air Blast type. System Pre-set pressure, over load cut off 175bar. Operator canopy open type, tubular structure with canvas. Night working Lights 2 nos FWD, 2nos REV, One central. Electric horn one push button controlled. Battery 2 nos exide as per manufacturers warrantly. System -24 Volt DC, 120AH. Beam structure in six pieces fastened together having sleeper gripping hydraulic cylinders, steel wire rope, pulleys and vertical guide and anti sway roller structure.

Hme sleeper laying machine slm. part of mechanised railway track construction. This machine lifts 20 sleeper simultaneously using its hydraulic lifting beam then travels to the site and lays down the sleepers 20 numbers simultaneously equally spaced and parallel to one another as per railway standards