Our Products
Technical Parameters
Casting Process | Centrifugal casting |
---|---|
Material | Standard IS 210, GG25, ASTM A48 but can be deviated according to customer requirements. |
Hardness | 210- 275 BHN can be deviated according to customer requirements. |
Tensile | 25kgf/sq. mm can be deviated according to customer requirements. |
Graphite | Type A & B (D&E Random) |
Flake Size | 6-7 |
Free Ferrite | Less than 10% |
Matrix | Fine Lamellar & Sorbitic Pearlite |
Surface Roughness | Ra 0.4 to 0.8 micron Rz 4 to 7 micron Vo 0.16 to 0.45 |
Other Details :
|
We are renowned for offering high quality Cylinder Liner Sleeves. These Cylinder Liner Sleeves are manufactured by us using "centrifugal cast process", which is the best method. Our Cylinder Liner Sleeve possesses the bearing metal qualities that cause skin healing after abrasion and a structure that is readily wetted by oil and retains an oil film. Corrosion resistance of Cylinder Liner Sleeves is further improved by adding Chromium in the metal. Production Capacity :
Outer Diameter :
Technical Parameters
Casting Process | Centrifugal casting |
---|---|
Material | Standard IS 1865 but can be deviated according to customer requirements. |
Hardness | 179 - 241 Brinell or it can be deviated according to customer requirements. |
Tensile | 80,000 psi or it can be deviated according to customer requirements. |
Graphite | Spheroical form |
Flake Size | Type I or II |