Offset Centerline Calipers specially designed for center to center distance measurements on the same and offset planes. Hole diameter should be larger than 1.5mm (.06") but smaller than 10mm (.4"). Can also measure from edge to center. Without Depth Bar.

Made from sides of 'C' Sections & steps of 65mm (2.½) reinforced section OR sides of 'C' section.Complete with rubber shoes & caps to prevent scratches on the floor & wall.The Ladder can be used against support of wall only.Available as from 6ft to 20ft.  

Mitutoyo's new ABS Digimatic Caliper "MYCAL Absolute" keeps track of its origin point once set. No more repeated zero setting is necessary with the "MYCAL Absolute" as well as no more care for the over - speed error. Whenever turned on, the large LCD screen displays the actual slider position ready to start measurement.   Features:   ABS Digimatic Calipers display zero setting at any slider position along the scale for incremental comparison measurements. This switch will also allow return to the absolute mode and display of the true position from the origin point. It have large and clear LCD screen. Optional add-on DATA /HOLD Unit is available. Single SR44 battery operation with approx. 3.5 years battery life under normal working conditions.

Made from sides of 'C' Sections & steps of 65mm (2.½) reinforced section Lining on steps for firm foot hold grip, complete with platform on top & rubber shose at the bottom & non pinch folding handles.Available as from 3ft to 20ft.  

Features:   Measures the width, height, and depth of can seams. Three types of micrometers are available for: steel can, aluminum can, and sprayer cans.

Features:   Due to the low measuring force these calipers are ideal for elastic or resilient work pieces such as plastic parts and rubber parts that standard calipers can not measures.

Permitting four types of different measurement (internal, external, depth and step). Slider displacements are amplified by a rack - and - pinion mechanism and indicated on the dial. Carbide Jaw Dial Calipers are also available. With clamping screw atop the slider.

Features:   The main and vernier scales are flush-fitted to eliminate parallax errors because of the diamond-shaped (octagonal) cross section of the main scale. With clamping screw below the slider. Permitting four types of different measurement (internal, external, depth and step).

Fully automatic heatless dryers with in-built Pre & Post Filter.

Offset Centerline Calipers specially designed for center to center distance measurements on the same and offset planes. Hole diameter should be larger than 1.5mm (.06") but smaller than 10mm (.4"). Can also measure from edge to center. Without Depth Bar.

We offer lubricants. For many of a vehicle’s components, the lubricant plays a vital role as a design element. Because wherever there is relative motion between machine components in contact, specialty lubricants reduce wear and tear, alleviate friction and enhance the functioning of the component concerned. Kluber Lubrication accordingly prioritizes close cooperation between the component and lubricant producers whenever new development work is involved.

Features:   The anvil and the spindle have a blade for measuring the groove diameters of shafts, keyways, and other hard-to-reach portions. With Ratchet stop for constant force. The 222 series is provided with a digit counter. Providing with a standard except for 25 mm (1") model.