Other Products / Services #3737880

The Company is Counted amongst the Top Manufacturers, Suppliers and Exporters of the High-tech Airless Electrostatic Applicator. the Airless Electrostatic Applicator is a Winning Combination of Airless & Electrostatic Applicator System. the Airless Electrostatic Applicator Provides High Film Build-up in Single Pass with Wrap Around Effect & Comprehensive Edge Coverage.

The company is the leading Manufacturer, Exporter and Supplier of the Down Draft Dry Type Booth. The Down Draft Dry Type Booth is recommended for heavy or large articles. In Down Draft Dry Type Booth, metallic filters are provided to arrest the over sprayed paint. The Down Draft Dry Type Booth employs metallic filters at the bottom and the complete structure of the Down Draft Dry Type Booth is bolted.

We are a Manufacturer, Exporter and Supplier of the best Side Draft Dry Type Booth. The Side Draft Dry Type Booth is made up of 18 SWG materials, with GI powder coated sheets. The suction is taken at the back side of Side Draft Dry Type Booth, connected to the blower. Blower is placed on separate structure so that vibrations are not passed & noise is reduced. The metallic filters (male female) types are provided at the back side of the Side Draft Dry Type Booth.

The company is a known Manufacturer, Exporter and Supplier of the Material Handling Track & Trolley. Depending upon the requirement of the load or article size, Material Handling Track & Trolley can be selected.

We are a Manufacturer, Exporter and Supplier Just through a switch of a button, the required route can be selected for the material movement. Lever operation by pneumatic switch can be made. From one track material can be moved to different tracks without much human effort

The Company is Renowned as the Leading Manufacturer, Exporter and Supplier of the Premium Quality track Routing Through Oven. the Track Routing Through Oven Serves the Various Purposes of the Diverse Industries.

We are a Chief Manufacturer, Exporter and Supplier of the High Quality curing Oven with Material Handling. the Curing Oven with Material Handling is Available in a Wide Variety and At Competitive Prices.

We are a Manufacturer, Exporter and Supplier of pneumatic Oscillator. a Special Purpose Pendulum Oscillator is Used if Article Moves On Ground Conveyor. Presently this is Used in Textile Industry. While Fabric is Being Mixed On the Conveyor, Anti-static Solution is Sprayed to Avoid the Sticking of the Fabric. applicationsfevicol Spraying On Ply Woodprimer or Coal-tar Spraying On Cement Roof Sheets. (zig - Zag)primer or Paint Coating On S.s. Sheetshorizontal Circular Movement

The company is renowned as the leading Manufacturer, Exporter and Supplier of the premium quality Pendulum Oscillator. The Pendulum Oscillator serves the various purposes of the diverse industries.

We are a Manufacturer, Exporter and Supplier Horizontal Reciprocator. Emr Can-be Mounted Horizontally to Coat, Top Bottom Side of the Article. all Type of Guns Can Be Mounted for Operation. this Type of Reciprocator is Used When the Article Orientation is Not Within the Reach of the Operator or Vertical Reciprocator is Not Feasible.

We are a prime Manufacturer, Exporter and Supplier of the Air Assisted Airless Gun. The Air Assisted Airless Gun is an air assisted gun, which provides better finish due to additionally atomized air. The Air Assisted Airless Gun is available in a wide range, at reasonable prices for the clients.

We are a prominent Manufacturer, Exporter and Supplier of the highly efficient Batch Plant. The Batch Plant offers optimization of energy, time, space, and finishing. Powder coating quality and efficiency can be optimized only if all the elements of complete powder coating process give optimized performance. Powder coating plants can be basically divided into conveyorised plants and Batch Plants. The Batch Plants are based on the premise that both the coating as well as curing process is optimized on the batch size. Besides, the pre-treatment, batch plant consists of applicators, recovery booth, curing oven and the material handling system.

We are a Manufacturer, Exporter and Supplier of the Top Quality holding Clamp. the Holding Clamp is Used for Very Heavy Articles. the Holding Clamp is Used for Lifting or Moving the Heavy Articles Up 16 Tons.

We are a Manufacturer, Exporter and Supplier rail Bogie Painting, Which is a Very Good Example of Rail Coach Customization, Using Auto Guns. in This, Two Vertical Reciprocators with Auto Guns and One Overhead Reciprocator with Circular Movement of Auto Gun Move Across the Length of Coach. Hmi - Color Screen & Article Sensing is Used I.e. if There is Gap, It is Sensed and the Spraying is Stopped.

We are a Prominent Manufacturer, Supplier and Exporter of the Top Grade Manual Applicator. the Company Offers Advanced Manual Applicators to the Clients with the Twin Philosophy of Innovation and Customer Satisfaction. the Manual Applicator is in New Scenario of Quality and Rates, as Rates are Going Down and Customers are Demanding More. to Balance such a Situation is a New Challenge for Manufacturer, Thus We Minimize the Production Cost By Optimum Use of Machinery and Man Power.

We are a chief Manufacturer, Exporter and Supplier of the high-end Bell Applicator, which is used for painting large work pieces. The Bell Applicator offered by the company is highly demanded in the national and international market.

The Company Holds An Expertise in Manufacturing the High Quality Disc Applicator, Which is Used for Painting of Articles On Conveyorised Lines. the Disk Applicator is Used for Various Purposes Across the Globe. Thus, We are a Renowned Manufacturer, Exporter and Supplier of the Disk Applicator.

We are a Manufacturer, Exporter and Supplier of the minirail. the Overhead Biplaner Chain Conveyor with Four Trolley & 100 Mm Pitch is Ideal for Light Weight Components. Complete Process Can Be Accommodated in a Compact Space, as the Bend Radius is Only 300mm.

We introduce ourselves as the major Manufacturer, Exporter and Supplier of top grade Sieving Machine Sifter in India. The Sieving Machine Sifter can accommodate powder flow from three Multi Cyclones. The sieves are available in variety of sizes catering to different powders. Sufficient dampening provides noiseless operation.

We are a Major Manufacturer, Exporter and Supplier of the mini Cyclone. the Mini Cyclone Feeds Powder to the Sieve and Then to the Hopper. During the Process, Fines Get Separated and Delivered Back to the Powder Booth to Avoid Air Pollution.

The company is a Manufacturer, Exporter and Supplier of the premium Reciprocator Model - EMR 8. The Reciprocator Model - EMR 8 is a highly advance automated model for the painting industry. The Reciprocator Model - EMR 8 provides smooth and jerk free operation. It can come with a provision for unequal stroke length & multi speed within one stroke. The Reciprocator Model - EMR 8 is available in horizontal and vertical movement

Future Fuel : Bio Diesel invention of the Automobile Changed the World Completely and Irreversibly. Extensive Use of Automobiles Has Resulted in Largely Unhindered Use of Fossil Fuels Leading to global Warming. the Ill-effects of Global Warming are Foreseen as a Bigger Problem to Global Health and Wellbeing Than the Prospect of World War Iii. regulations On Environment are Now Insisting On Stricter Adherence to Environmental Norms. this Translates Directly to Higher Cost for Conventional Fossil Fuel Production Due to Increased Pollution Control Measures to Be Adapted in the Production Process. kyoto Protocol, the U. N. Framework Convention On Climate Change, Emphasises the Use of Biodiesel for Transport Fuel in Order to Reduce Green House Gas Emissions. By 2010 Eu States Need to Increase Market Share of Biofuels to 5.75%. Great Demand for Biodiesel, the Enviro-friendly Option, is Written Large On the Future Scenario. Being a Renewable Resource, Biodiesel Will have a Very Long Term Business Cycle. this Fuel of the Future is Surely Here to Stay.perhaps Forever in One Form or Regulations On Another. bio Diesel Production Process feedthe First Stage Starts with Selection of Feed/feeds for Biodiesel Production. Iespl Supports Several Different Types of Feeds bleachingthe Primary Purpose of Bleaching is to Remove Colour Pigments from the Oil. Bleaching Clays / Earths are Used for Bleaching. After Adsorption Process, the Clay is Filtered Out and the Bleached Oil is Recovered. degummingthe Next Process is Degumming.here Oil is Passed Through Heat Exchanger to Drive Off Moisture. transesterificationthis is the Vital Operation for Biodisel Production. in this Process the Filtered Oil is Mixed with Methanol in Presence of a Catalyst. Here Fatty Acids are Separated. washing & Dryingthe Subsequent Washing and Drying (distillation) Ensures the End Result I.e. Biodiesel. After Washing Biodiesel and Bi-product Glycerin Get Separated. Washed Biodiesel is Dried to Drive Off Moisture. in this Process Excess Methanol is Removed Which is Recycled and Used Again. purificationdried Biodiesel is Further Purified Through Filtration. the Best Quality of Biodiesel is Thus Obtained. by-productsglycerin is An Important Byproduct in the Biodiesel Manufacturing Process. the De-oiled Cake Produced After Oil Extraction also Has Many Uses as Fertilizer, Biogas Feed, Pesticide, Etc. biodeisel Producedis as per Biodiesel International Standards of Astm D6751, En 14214 / is 15607

Intech Energy Systems Pvt. Ltd has acquired an expertise in Manufacturing, Exporting, and Supplying a diverse range of Bio Based Lubricants. These Bio Based Lubricants are highly demanded by the clients for its eco-friendly approach and excellent performance. An emerging trend :

• Since 1994, developed world realized the disastrous effects of use and disposal of mineral-based lubricants on environment and attention was focused on development of biodegradable lubricants.
• Development of Bio Based Lubricants to cater to a wide range of needs is now on.
• Developed countries have started either making use of Bio Based Lubricants mandatory or preferential and are subsidizing the cost to users for changing over to biodegradable lube products.
• Lubricants :
  • Current Types and Performances :
    • Petroleum or mineral based and synthetic lubricants are prevailing in market.
    • PETROLEUM OR MINERAL: based lubricants are cheaper, but do not provide all the required performance features. They get most of their lubricity from additives. Besides, they are not biodegradable.
    • SYNTHETIC: Their performance excels than petroleum based lubricants, especially at higher temperatures and pressures. But synthetic are not necessarily biodegradable.
    • • • Key features :
          • Raw material is plant or animal based
          • End product is biodegradable
          • End product is non toxic
          • • Biobased lubricants :
              • How they adhere to the metal surface?
              • Excellent performance characteristics :
                • Excellent Inherent Lubricity
                • Better viscositypressure performance
                • Superior thin film strength
                • Excellent Viscosity Index
                • Lower volatility
                • High flash fire points
                • Ultimately Bio-degradable
                • Conventional vs biobased :
                  • An edge for biobased lubricants
                  • Base Oil Lubricity Oxidation stability Shear stability Viscosity index Bio Lubricant Excellent Excellent Excellent 165-210 Ester Excellent Fair Excellent 145-155 PAO Fair Excellent Excellent 120-135 Mineral Fair Good Varies 95 - 105, 125-135 Biodegradibility :
                    • Biobased Lubricants are Green
                    • Typical Biodegradability VALUESBase of lubricant% of biodegradationVegetable oil70 to 100Mineral oil15 to 35 Lubricity :
                      • Prime purpose served the best by biobased lubricants
                      • Superior performance to petroleum based lubricants
                      • Better wear protection in 4-Ball Weld* test
                      • Requires fewer additives
                      • Less volatilityHigher flash point
                      • Safer to use
                      • The Four-Ball Weld Test is used to measure load-carrying capability. A steel ball is loaded and rotated against 3 fixed steel balls. The contact surfaces are covered with test lubricant, a load is applied, and a timed test is performed. At the end of each run, additional weight is loaded onto the balls, and the test re-run. The weld point is the load at which the balls weld together. Ref: Ultra Lubes. Usage :
                        • Biobased lubricants are available for all applications.
                        • Preferred for bearings, material handling equipments including conveyors, cranes, forklifts, elevators, wire ropes, etc. where lubricity, extreme pressures, load characteristics, high temperatures are prime.
                        • Right choice for longest life of equipment :
                          • Superior lubricity resulting in multifold enhanced life and durability of equipment
                          • Energy saving of 15% or more
                          • Reduction in operating temperatures
                          • Decline in corrosion of metal surfaces
                          • Keeping contaminants out of system
                          • Mint :
                            • Pioneers in Bio energy & Bio lubricants :
                              • Yashprabha Group is involved in field of electronics, surface coating plants, material handling and auto storages, bio energy and manure under the brands of Minilec, Intech, Statfield, Yashprabha Agro, and MINT.
                              • MINT has a 100% EOU, Multi feed, 100 tons per day biodiesel plant at Pathardi, Chiplun. Dirghayu Biolubricants is its next venture.
                              • Additionally Intech Energy Systems Pvt Ltd, having expertise on designing of chemical plants, are licensed to produce and sell Dirghayu biobased lubricants.
                              • • Dirghayu green lubricants :
                                  • Guide to application areas :
                                    • Started development of lubricating oils and greases for our own group products and they are :
                                    • Conveyors & Transporters
                                    • Vertical Carousels
                                    • Reciprocators
                                    • Airless pumps
                                      • Other areas :
                                      • Gantry cranes, forklifts, hoist, wire ropes
                                      • Spindle oil for modern high speed machine tools
                                      • • • PRODUCT RANGE
                                            • MK-HTL 250 (Biobased)
                                              • Provides clean lubrication in high temperature environments, with low volatility and excellent wear protection. Suitable for paint line drying oven chains, roller chains in conveyor ovens, kiln car bearing and rollers.
                                              • • • MK-NT 100
                                                    • Provides clean lubrication in moderate temperatures, has low volatility and excellent wear protection. Suitable for roller chains in conveyor ovens operating at moderate temperatures.
                                                    • • • MP-EP-GO 100
                                                          • Useful for high performance gear fluids with high viscosity index, hydrolytic, thermal and shear stability.
                                                          • • • MP-HO 100
                                                                • Hydraulic oil with extreme pressure additives suitable for chains, bearings, valves.
                                                                • • • MP-SO 100
                                                                      • Spindle oil; having low viscosity, Suitable for modern high speed textile mills, machine tools, etc. Has excellent protection against rust and corrosion. Provides excellent load carrying ability.
                                                                      • • • MINT MP-2
                                                                            • Prevents rust and corrosion for metal-to-metal contact areas, low to moderate loads applications, temperatures up to 80C. Suitable for total loss systems. NLGI grade 2 grease.
                                                                            • • • MINT EP-2
                                                                                  • Moly based biodegradable grease, formulated for metal-to-metal contact areas, heavy loads, and extreme pressure applications. Contains advanced extreme pressure additives. Prevents rust and corrosion. NLGI grade 2 and 3 greases.
                                                                                  • • • MINT HT-2
                                                                                        • Lithium based biodegradable grease for high temperature applications with moderate load conditions.
                                                                                        • • • MINT SP-2
                                                                                              • Lithium complex based biodegradable grease with super performance characteristics for high temperature and heavy loads applications.