Delhi, India
GST : 07DJRPS2590J1ZE
Verified
Add Review
Our Products
DMP-H Series Mechanical Power Press Are Manufactured Form 30ton to 300toin Capacity Using Tested Components and Developed with Rigid Configurations.
Frame
H Types Frame Is Well Fabricated With Single Ms Plate From Top To Bottom And Stress Is Released For A Long Life.
Frame Is Being Bored In House With VWF Boring Machine.
Bushes
All Machine Bushes Will Be Of Phosphorous Bronze Material Grooved For Lubrication.
Drive Shaft
Drive Shaft of Carbon-Alloy Steel EN9 For A Long Efficient Life.
Connecting Rod
Two-Piece Connecting Rod Helps In Easy Maintenance.
In Future You Do Not Need To Dismantle Complete Machine To Repair Connecting Rod.
Back Shaft
We install back shaft on CI cast Housing & they are bolted on body to share the load of the shaft.
Standard Accessories
Slide adj. Spanner
Front Gaurd
Fly wheel & Gear Guard
Knock Out system
Optional Accessories
Two Hand Pneumatic Safety System
Automatic/Manual Lubrication Pump
Extra Ram Base Plate
De-Coiler
Counter Meter
Inclinable Type
Single Hand Mechanical Safety System
Electric Motor, Starter and Vee-Belts & Pulley
Feeder/ Gripper
Electrical Panel
Die Cushion
Extra Bolster
Specification
| Capacity in Tons | Unit | 30Ton | 50Ton | 75Ton | 100Ton | 150Ton | 200Ton | 250Ton | 300Ton |
|---|---|---|---|---|---|---|---|---|---|
| Bolster Size | mm | 460 * 510 | 510 * 560 | 560 * 610 | 610 * 660 | 660 * 750 | 760 * 810 | 925 * 925 | 950 * 975 |
| Bolster Thickness | mm | 75 | 90 | 90 | 100 | 125 | 125 | 125 | 125 |
| Bolster Opening | mm | 130 | 150 | 160 | 175 | 190 | 200 | 250 | 300 |
| Shank Hole | mm | 40 | 40 | 50 | 60 | 60 | 70 | 70 | 80 |
| Stroke Legnth Variable | mm | 90 | 102 | 114 | 126 | 152 | 160 | 178 | 190 |
| Shaft Dia | mm | 95 | 107 | 133 | 159 | 184 | 204 | 225 | 260 |
| Rating Point | mm | 2.5 | 3 | 3 | 4 | 4 | 4.5 | 4.5 | 5 |
| Shut Height | mm | 300 | 320 | 330 | 350 | 400 | 400 | 425 | 450 |
| Gear Dia | mm | 660 | 710 | 760 | 865 | 915 | 1145 | 1270 | 1460 |
| Fly Wheel Dia | mm | 710 | 830 | 915 | 1070 | 1210 | 1320 | 1400 | 1400 |
| Speed | SPM | 65 | 60 | 55 | 50 | 45 | 35 | 30 | 30 |
| Slide adjustment | mm | 30 | 35 | 40 | 50 | 50 | 60 | 70 | 80 |
| Floor to top of bed | mm | 820 | 820 | 850 | 850 | 900 | 900 | 950 | 950 |
| Height of Machine | mm | 2300 | 2600 | 2900 | 3200 | 3300 | 3700 | 3900 | 4100 |
| Area (LxW) | mm | 1100 X 1300 | 1200 X 1400 | 1350 X 1550 | 1700 X 1800 | 1800 X 2000 | 1900 X 2200 | 2050 X 2400 | 2250 X 2600 |
| Motor Power required | Hp / RPM | -167941 | -167880 | 7.5 / 1440 | -167727 | 15 / 1440 | 20 / 1440 | 25 / 1440 | 30 / 1440 |
| Frame Plate Thickness Inner plate Outerplate |
mm mm |
16 12 |
20 12 |
28 12 |
28 20 |
28 20 |
32 20 |
32 20 |
38 20 |
| Net Weight | Kg | 1800 | 2800 | 3700 | 5000 | 7000 | 10000 | 12500 | 17500 |
Specification
| MODEL | UNDER CRANK | |||
|---|---|---|---|---|
| SUP | U1250 | U2000 | U2500 | U3000 |
| Shearing Length MS | 1270 | 2050 | 2540 | 3100 |
| 1525 | ||||
| Shearing Thickness for MS | 44992 | 4 | 4 | 4 |
| Size of Blades | 1270 X 75 X 18 | 2050 X 75 X 18 | 2050 X 75 X 18 | 3100 X 75 X 18 |
| No. of Segments | 2 | 4 | 4 | 6 |
| Table Size | 425 | 425 | 425 | 425 |
| Height of Table | 825 | 825 | 850 | 850 |
| Max. Back Gauge Gap | 20-500 | 20-500 | 20-600 | 20-600 |
| Max. Front Gauge Gap | 600 | 600 | 600 | 600 |
| No. of Strokes per Min. | 50/55 | 45/50 | 40/50 | 40/50 |
| Required HP/RPM (1440) | 5 | 7.5 | 10 | 15 |
As a trusted name, we always make sure that our products are properly packed and remain free from damage during transit. For this, we have hired an adroit team of experts having immense experience in packaging. Quality is one aspect on which we can never compromise. And, for this, our personnel work hard and ensure that the entire lot complies with defined quality norms.
DMP-C Series mechanical Power presses are manufactured from 20 ton to 150-ton capacity using duly tested components and developed with rigid configurations.
Frame :- The frame is fabricated with MIG WELDING to release the stress increase the lifespan of the frame.
Bushes :- Every Bush on the machine is made out of phosphorous bronze specially grooved for lubrication.
Drive Shaft :- Drive Shaft is made of carbon alloy steel (EN9) for a long life and better efficiency
Connecting Rod
Two piece connecting rod helps in easy maintenance.
In the future, you do not need to dismantle the complete machine to repair the connecting rod.
Back Shaft
Back-shaft is installed on CI casted housing & then bolted on the body to share the load of the shaft.
Standard Accessories
Slide adj. Spanner
Front Gaurd
Fly wheel & Gear Guard
Knock Out system
Optional Accessories
Two Hand Pneumatic Safety System
Automatic Manual Lubrication Pump
Extra Ram Base Plate
De-Coiler
Counter Meter
Inclinable Type
Single Hand Mechanical Safety System
Electric Motor, Starter and Vee-Belts & Pulley
Electric Bolster
Feeder/ Gripper
Electrical Panel
Die Cushion
Specification
| Capacity in Tons | Unit | 20Ton | 30Ton | 50Ton | 75Ton | 100Ton | 150Ton |
|---|---|---|---|---|---|---|---|
| Bolster Size | mm | 660 * 355 | 710 * 405 | 760 * 505 | 860 * 560 | 1000 * 630 | 1100 * 670 |
| Bolster . | mm | 75 | 75 | 90 | 90 | 100 | 125 |
| Bolster Opening | mm | 125 | 130 | 150 | 175 | 200 | 250 |
| Shank Hole | mm | 30 | 40 | 40 | 50 | 60 | 60 |
| Stroke Legnth Variable | mm | 76 | 90 | 102 | 114 | 126 | 152 |
| Shaft Dia | mm | 86 | 95 | 107 | 133 | 159 | 184 |
| Rating Point | mm | 2.5 | 2.5 | 3 | 3 | 4 | 4 |
| Shut Height | mm | 275 | 300 | 320 | 330 | 350 | 400 |
| Gear Dia | mm | 610 | 660 | 710 | 760 | 865 | 915 |
| Fly Wheel Dia | mm | 660 | 710 | 830 | 915 | 1070 | 1210 |
| Strokes per minute | SPM | 70 | 65 | 60 | 55 | 50 | 40 |
| Slide adjustment | mm | 25 | 30 | 35 | 40 | 50 | 50 |
| Floor to top of bed | mm | 820 | 820 | 820 | 850 | 850 | 900 |
| Height of Machine | mm | 2250 | 2400 | 2750 | 3000 | 3200 | 3550 |
| Area (LxW) | mm | 900 * 1000 | 1000 * 1100 | 1150 * 1250 | 1250 * 1350 | 1500 * 1600 | 1650 * 1700 |
| Motor Power required | Hp / RPM | -167941 | -167941 | -167880 | 7.5 / 1440 | -167727 | 15 / 1440 |
| Frame Plate Thickness | mm | 28 | 32 | 32 | 38 | 40 | 40 |
| Net Weight | kg | 1450 | 2000 | 3000 | 4000 | 5500 | 7600 |
We are indulged in presenting a wide range of Deep Throat Power Press to the clients. We offer these products in several specifications and made as per the industry set norms. We employ high quality components and material to develop these products, which acquired from reliable source of the market. Offered products are available from at reasonable price.
Features:
High durability
Dimensional accuracy
Sturdy design
Specification
| MODEL | OVER CRANK | |||||
|---|---|---|---|---|---|---|
| SUP | O1250 | O2000 | O2500 | H2000 | H2500 | H3000 |
| Shearing Length MS | 1270 | 2050 | 2540 | 2050 | 2540 | 3100 |
| 1525 | ||||||
| Shearing Thickness for MS | 45085 | 45085 | 45085 | 45211 | 45211 | 45211 |
| Size of Blades | 1270 X 75 X 23 | 2050 X 75 X 23 | 2050 X 75 X 23 | 2050 X 100 X 23 | 2540 X 100 X 23 | 3100 X 100 X 23 |
| No. of Segments | 2 | 4 | 4 | 4 | 4 | 6 |
| Table Size | 425 | 425 | 425 | 425 | 425 | 425 |
| Height of Table | 800 | 800 | 800 | 800 | 800 | 800 |
| Max. Back Gauge Gap | 20-500 | 20-600 | 20-600 | 20-600 | 20-600 | 20-600 |
| Max. Front Gauge Gap | 600 | 750 | 750 | 750 | 750 | 750 |
| No. of Strokes per Min. | 40/35 | 40/35 | 40/35 | 35/30 | 35/30 | 35/30 |
| Required HP/RPM (1440) | 10 | 15 | 20 | 25 | 25 | 30 |
Specification
| TECHNICAL DATA | UNIT | SUP30 | SUP40 | SUP50 | SUP75 | SUP100 | SUP125 | SUP150 | SUP175 | SUP200 |
|---|---|---|---|---|---|---|---|---|---|---|
| Rated Tonnage Point | Tons | 3.2 | 3.2 | 3.2 | 4 | 4 | 6 | 6 | 6 | 6 |
| Stroke Lenght | mm | 7 | 7 | 80 | 120 | 150 | 180 | 200 | 200 | 200 |
| Number of Stroke | min. | 75 | 65 | 65 | 60 | 55 | 45 | 40 | 35 | 30 |
| Bed to Ram | mm | 260 | 290 | 330 | 430 | 490 | 540 | 600 | 660 | 660 |
| Slide Adjustment | mm | 50 | 55 | 60 | 70 | 80 | 80 | 100 | 110 | 120 |
| Slide Are (L-RxF-B) | mm | 300x220 | 360x250 | 400x300 | 500x360 | 560x420 | 650x470 | 700x550 | 900x700 | 1200x700 |
| Bolster Are (L-RxF-B) | mm | 680x300 | 800x400 | 850x440 | 900x500 | 1000x550 | 1150x600 | 1250x760 | 1400x820 | 1500x840 |
| Bolster Thickness | mm | 70 | 70 | 70 | 90 | 100 | 110 | 125 | 140 | 150 |
| Main Motor | H.P | 3 | 3 | 5 | 7.5 | 10 | 15 | 20 | 25 | 30 |
| Slide Adjustment Motor | Kw | MANUAL TYPE | 1.1 | 1.1 | 1.5 | 1.5 | 2.2 | 2.2 | ||
| Height from floor to bed | mm | -- | 800 | 800 | 800 | 850 | 850 | 900 | 900 | 1000 |
| Required Air Pressure | kg | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 |
| Shank Hole | mm | 38.1 | 38.1 | 38.1 | 50 | 5 | 5 | 65 | 65 | 65 |
| Die Cushion | Tons | -- | -- | -- | 8 | 10 | 15 | 20 | 25 | 30 |
| Overall Machine Size (L-RxF-B) | mm | 840x1100 x2135 |
900x1200 x2345 |
950x1400 x2425 |
1000x1420 x2780 |
1170x1595 x2980 |
1290x1720 x3195 |
1390x2140 x3670 |
1500x2300 x3800 |
1700x2600 x4000 |
