Domex 700 MC IS Hot rolled, extra high strength, cold forming steel from SSAB Sweden. Domex cold forming steels are thermo-mechanically rolled in modern plants where the heating, rolling and cooling processes are carefully controlled. The chemical analysis, consisting of low levels of carbon and manganese has precise addition of grain refiners such as niobium, titanium or vanadium. This together with a clean structure, makes Domex Steels the most competitive alternative for cold formed and welded products. Domex 700 MC with designation D and E meet and exceed the demands for steel S700MC in EN-10149-2. APPLICATION The extra high strength steel grades are used in applications such as truck chassis, cranes and earthmoving machines. In these applications, the high strength of the steels is used to save weight and/or to increase the payload. As a result of this and the good formability of the steels, the total costs can be reduced. The additional high quality steel evaluations are utilized as a part of uses, for example, truck body, cranes and earth moving machines. In these applications, the high quality of the steels is utilized to spare weight and/or to build the payload. As a consequence of this and the great formability of the steels, the aggregate expenses can be diminished. Normal applications are vehicle chassis, holder casing structures, steel extensions and building developments, chimney stack cases, rail wagons, snow sheds, various types of poles i.e. applications where a consumption safe steel is required together with high quality. Also, this steel is climate safe, i.e. amid open air use inside several years, a smooth minimal oxide layer is framed that restrains further consumption. Domex 700 characterized by weldability, impact toughness, formability, high strength, corrosion resistance.