Our Products
Digital Washing Fastness Tester is used to determine colorfastness of textile material irrespective of their composition and their form to washing. Made up of high grade stainless steel, our Digital Washing Fastness Tester is provided with an inching switch for loading and unloading of the test vessels. A specimen of textile is mechanically agitated in a standard soap solution, before being rinsed and dried in the Digital Washing Fastness Tester.
Technical Specifications
Dimension of Main Bath |
Depends upon No. of Test Vessels (Jars). |
---|---|
No. of Test Vessels |
Die Made Stainless Steel Test Vessels (Jars). |
Volume of each Vessel |
550 ml approx |
Speed of Rotation |
40 r.p.m. ±2 r.p.m. |
Temperature of Main Bath |
Ambient to 110 oC. |
Motor |
¼ HP 230 V AC. |
We offer a comprehensive range of Digital Pilling Tester that is used in textile industry for determining the tendency of the fabric to form pills. We manufacture, export and supply Digital Pilling Tester from New Delhi. Pilling is the formation on the surface of a fabric of small balls of entangled fiber. It is a fabric surface fault characterized by little pills of entangled fibers clinging to the surface. These are formed during wearing or washing by the entanglement of the loose fibers, which protrude from the fabric surface, and development of these into spherical bundle anchored to the fabric by a few unbroken fibers. These give a very unsightly look to the garments. The apparatus is beautifully finished in powder coated paint. The boxes are covered with a layer of matching laminated sheet.
Functioning :Test specimen is taken from the fabric sample and is sewn, so as to be a firm fit, when placed round a molded polyurethane tube. Four tubes are placed in each of the two Boxes provided in the Tester. The Boxes are set in motion for an agreed number of revolutions. After tumbling, the extent of Pilling is determined visually against photographic standards.
Equipment :The LABIN Digital Pilling Tester consists of two Wooden Cubic Boxes with inside surfaces lined with cork and outside surfaces beautifully laminated. These boxes are rotated about their central axis at a specified speed with the help of a motor and a gear box. A pre-settable DIGITAL counter stops the motor automatically after the desired number of revolutions.
The Equipment is supplied complete with :
Specifications
Interior Size of Wooden Boxes | 225 mm x 225 mm x 225 mm |
---|---|
Thickness of Cork Lining | 3 mm |
Speed of Rotation of Boxes | 60 r.p.m. |
Size of Test Specimen | 125 mm x 125 mm |
Size of Rubber Tube | 32m OD x 25.5m ID x 150m Length |
Motor | ¼ H.P. Single Phase 220 V A.C. |
Counter | 5 Digit Pre-Settable Digital Counters |
Related Standard
IS 10971-1984 | : Method for Determination of Pilling Resistance of Fabrics. |
---|
This machine is used to determine the hardness of asphalt material the design features direct vertical loading with loading weight that rest on thrust bearings therefore load is applied to the specimen without transmitting shock to the loading column. At the end of the loading period the depth of penetration of the pin can be read form the dial gauge to an accuracy of 0.01mm. The thermostatically controlled heater unit has a built in impeller which circulates the water to maintain an even temperature throughout.
Application Field :The Test is intended to determine Color Fastness of Textile Material irrespective of their Composition (Cotton, Linen Silk, Man Made Fibers & Wool) and their Form (Fiber, Yarn or Fabric) to Washing. p.s.: The LABIN Digital Washing Fastness Tester can also be used for checking the Color Fastness against Drycleaning & Bleaching.
Introduction :In this Test, a Specimen of Textile in contact with pieces of Adjacent Fabric (Standard Fabric) is mechanically agitated in a Standard Soap Solution (Sodium Oleate Solution), before being rinsed and dried. The change in Color of the Specimen and the Staining of the Standard Fabric are assessed with Standard Grey Scales. The Instrument used for this purpose is called Digital Washing Fastness Tester.
Eqiupment :
MAIN BATH (Stainless Steel)The Main Bath is double walled S. S. Water Bath, which is electrically heated with Digital Temperature Controller-cum-Indicator. The gap between the walls is duly filled with special grade glass wool for proper insulation. The Bath is heated by means of two Immersion Heaters and a Capillary type Thermostat controls the Temperature. The Temperature of the Bath is indicated on a Digital Temperature Controller-cum-Indicator. The Bath has a double walled hinged lid made of stainless steel sheet.
The Bath is provided with 8 nos Die Made Stainless Steel Test Vessels (Jars). In these jars the Standard Soap Solution and the Test Specimens are kept during the Test. The vessels are provided with Silicon Gaskets for water tight closing. They are held in a Stainless Steel Rotor Assembly mounted on a Stainless Steel Shaft at the Center of the Bath. The Assembly rotates at a speed of 40 r.p.m. ± 2 r.p.m. The Rotor Assembly rotates with the help of an Electric Motor and Reduction gearbox.
A special Inching Switch is provided in the LABIN Digital Washing Fastness Tester for Loading and Unloading of the Test Vessels. It facilitates tremendous ease in operations.
STAINLESS STEEL BALLS (BS 1006: CO4, CO5, CO6:1990)100 Nos non-Corrodible Steel Balls of 6 mm Ø are provided with The LABIN Digital Washing Fastness Tester. These Balls are used for providing beating action during the washing operations.
The Complete Unit is fabricated on a Stainless Steel Frame. All four sides of the Unit are covered with beautifully S. S. Sheets. The Complete Top of the Unit is also made of Stainless Steel Sheet.
An attractive Acrylic Panel housing all the Controls is provided on the Front Right Side of the Unit.
Two Water Outlets are provided on the Left Side. Top is the Overflow outlet and Middle is the Water Outlet of the Main Bath.
Technical Details
Dimension of Main Bath |
Depends upon No. of Test Vessels (Jars). |
---|---|
No. of Test Vessels |
Die Made Stainless Steel Test Vessels (Jars). |
Volume of each Vessel |
550 ml approx |
Speed of Rotation |
40 r.p.m. ±2 r.p.m. |
Temperature of Main Bath |
Ambient to 95oC |
Motor |
¼ HP 230 V AC. |
Inching Switch |
For Loading and Unloading of the Vessels |
Controls | Digital PID Electronic Temperature Controller-cum-Indicator with Digital Timer |
Buzzer | Automatic Electronic Audio Buzzer |
Stainless Steel Balls |
(BS 1006 : CO4, CO5, CO6 :1990) |
Availability of Models |
From Models having 4 Beakers to 24 Beakers |
Related Standards
IS - 687-1979 |
Methods of Determination of Color Fastness of Textile Materials to Washing ~Test 1 |
IS - 3361-1979 |
Methods of Determination of Color Fastness of Textile Materials to Washing ~Test 2 |
IS - 764-1979 |
Methods of Determination of Color Fastness of Textile Materials to Washing ~Test 3 |
IS - 765-1979 |
Methods of Determination of Color Fastness of Textile Materials to Washing ~Test 4 |
IS - 3417-1979 |
Methods of Determination of Color Fastness of Textile Materials to Washing ~Test 5 |
Application FieldThe Equipment is intended to determine Color Fastness of all types of Textile Materials irrespective of their composition (e. g. Cotton, Linen, Wool, Silk, Man Made Fibers etc.) and their form (e. g. Fabric, Yarn or Fiber etc.) except photo chromatic colored textile to sunlight.
Specifications
Standard : | The Equipment will meet the requirement mentioned in IS, BS, AATCC and IS Standard Test Method |
---|---|
Light Source : | 500 MBTL (Mercury Ballast) Tungsten Filament Lamps and internally Phosphor coated, mounted centrally so that the light distribution constant around the Circumference. |
Working Life of Lamp : | 2000 hours approx. |
Exposure to Samples | The Equipment will provide equal exposure to all samples by a Moving Drum. |
Hollow Cylinder: | The Equipment will consist of a Hollow Cylinder of Metal open at both ends with an internal dia of 18" |
Viewing Glass: | A Viewing Glass will be fitted on the Sample Chamber. |
Hour Meter with Buzzer : | An Hour Meter with Audio-Visual Alarm and Hour Tantalizer will be mounted on the Base. |
Specimen Card Size : | 110 x 50 mm |
Specimen Thickness : | Up to 15 mm |
Specimen Holder : | 04 Specimen Holders installed at equidistance in the inner Circumference of Cylinder along with Metal Sheet mark to cover half of each Test Specimen and the Standards. |
Constant Cooling : | Water Tank and Horizontal Pump will be equipped for Constant Cooling with water flow when temperature touches up to 80°C. |
Test Tube Holder : | Test Tube Holders for Humidity Control – 50 nos |
Voltage Stabilizer : | 01 no |
Safety : | Auto control for Switching off the Lamp when the temperature and humidity goes beyond the set limit. |
Grey Scale : | Grey Scale Change in Color will be provided with the Equipment (SDC - UK/AATCC - USA). |
Blue Wool : | 1-8 Blue Wool Light Fastness Standards of SDC – UK/AATCC – USA) will be provided with the equipment. |