Post Buy Requirement
LM
Faridabad, Haryana, India
Add Review

Lubrication Systems And Equipment #3679568

Centralized Lubrication System

Multiline radial lubricator is best suited for machine plant where lubrication is required with high pressure continuously intermittently for individual point. This lubricator are used for machine plant like rolling mill, sugar plant, cement plant, rubber mixing machine, forging hammer, stone crusher, spong iron plant etc. This lubricator comprise of a single pumping station having a number of plunger pump placed radically and fitted on to the outer periphery of the housing. Each plunger unit is given a reciprocating motion with the help of a cam. The cam rotates with the help of an electric motor and speed reduction gear box. The dose per plunger pump cycle is 0.05 to 0.25cc (adjustable) with maximum pressure 200 Kgcm2.
View Complete Details

Automatic Lubrication Systems

Motorized lubrication units are electric motor driven pumps along with reservoir, oil filler, suction stainer, pressure relief valve, bleed valve etc. And are suitable for single shot automatic oil lubrication. These motorised lubrication units are to be run intermittently. During motorbest replica watches'ON' period (normally 5 sec) all metering cartridges eject out required amount of oil at various points of the machine. And during motor 'OFF' period (decided by lubrication frequency min.1 minute) these metering cartridges get recharged for next lubrication cycle. These units do not require any return line connection as metered amount of oil is lost in normal running of the machine


Model

Reservoir 

Discharge

Motor RPM1500 (Syn)

Relief Valve

Pressure Switch

FLOAT SWITCH

LM CLS-2900 (Dx)

2.9 Llrs.

1 LPM

0.12Kw,220VAC. Single phase

12 kg/Cm2

Optional

Optional

LM LS-03

3 Ltrs.

1 LPM

0.12Kw,220VAC. Single phase

15 kg/Cm2

Optional

Optional

LM CLU-2900 (Dx)

2.9 Ltrs.

1 LPM

0.12Kw,415VAC. 4Pole,3phase

15 kg/Cm2

220 V, 1Amp. With 1 NO+1NC Contact preset at 12kg/Cm2

220 V, 1 Amp. With NO or NC contacts

LM LU-03

3 Ltrs.

1 LPM

0.12Kw,415VAC. 4Pole,3phase

15 kg/Cm2

-do-preset at 12 Kg/Cm2

-do-

LM LU-05

5 Ltrs.

1 LPM

0.12 Kw,415V AC. 4Pole, 3 phase

20 kg/Cm2

-do-preset at 15 Kg/Cm2

-do-

LM LU-08

8 Ltrs.

2.5 LPM

0.18 KW.415V AC. 4Pole, 3 phase.

25 kg/Cm2

-do-preset at 18 Kg/Cm2

-do-

LM LU-20

20 Ltrs.

2.5 LPM

0.18 KW.415V AC. 4Pole, 3 phase.

25 kg/Cm2

-do-preset at 18 Kg/Cm2

-do-

LM LU-30

30 Ltrs.

2.5 LPM

0.18Kw,415VAC. 4Pole,3phase

25 kg/Cm2

-do-preset at 18 Kg/Cm2

-do-

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Mr. A. K. Yadav (Lubsa Multilub Systems)
  • Plot No.1870, Dabua Gajipur Road, Near Bhardwaj Medical Store, Nit, Faridabad, Haryana - 121001, India
  • Share us via
Manufacturer of Lubrication Systems and Equipment from Faridabad, Haryana by Lubsa Multilub Systems
Post Buy Requirement
LM
Faridabad, Haryana, India
Add Review

Lubrication Systems And Equipment #3679568

Centralized Lubrication System

Multiline radial lubricator is best suited for machine plant where lubrication is required with high pressure continuously intermittently for individual point. This lubricator are used for machine plant like rolling mill, sugar plant, cement plant, rubber mixing machine, forging hammer, stone crusher, spong iron plant etc. This lubricator comprise of a single pumping station having a number of plunger pump placed radically and fitted on to the outer periphery of the housing. Each plunger unit is given a reciprocating motion with the help of a cam. The cam rotates with the help of an electric motor and speed reduction gear box. The dose per plunger pump cycle is 0.05 to 0.25cc (adjustable) with maximum pressure 200 Kgcm2.
View Complete Details

Automatic Lubrication Systems

Motorized lubrication units are electric motor driven pumps along with reservoir, oil filler, suction stainer, pressure relief valve, bleed valve etc. And are suitable for single shot automatic oil lubrication. These motorised lubrication units are to be run intermittently. During motorbest replica watches'ON' period (normally 5 sec) all metering cartridges eject out required amount of oil at various points of the machine. And during motor 'OFF' period (decided by lubrication frequency min.1 minute) these metering cartridges get recharged for next lubrication cycle. These units do not require any return line connection as metered amount of oil is lost in normal running of the machine

Model

Reservoir 

Discharge

Motor RPM1500 (Syn)

Relief Valve

Pressure Switch

FLOAT SWITCH

LM CLS-2900 (Dx)

2.9 Llrs.

1 LPM

0.12Kw,220VAC. Single phase

12 kg/Cm2

Optional

Optional

LM LS-03

3 Ltrs.

1 LPM

0.12Kw,220VAC. Single phase

15 kg/Cm2

Optional

Optional

LM CLU-2900 (Dx)

2.9 Ltrs.

1 LPM

0.12Kw,415VAC. 4Pole,3phase

15 kg/Cm2

220 V, 1Amp. With 1 NO+1NC Contact preset at 12kg/Cm2

220 V, 1 Amp. With NO or NC contacts

LM LU-03

3 Ltrs.

1 LPM

0.12Kw,415VAC. 4Pole,3phase

15 kg/Cm2

-do-preset at 12 Kg/Cm2

-do-

LM LU-05

5 Ltrs.

1 LPM

0.12 Kw,415V AC. 4Pole, 3 phase

20 kg/Cm2

-do-preset at 15 Kg/Cm2

-do-

LM LU-08

8 Ltrs.

2.5 LPM

0.18 KW.415V AC. 4Pole, 3 phase.

25 kg/Cm2

-do-preset at 18 Kg/Cm2

-do-

LM LU-20

20 Ltrs.

2.5 LPM

0.18 KW.415V AC. 4Pole, 3 phase.

25 kg/Cm2

-do-preset at 18 Kg/Cm2

-do-

LM LU-30

30 Ltrs.

2.5 LPM

0.18Kw,415VAC. 4Pole,3phase

25 kg/Cm2

-do-preset at 18 Kg/Cm2

-do-

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Mr. A. K. Yadav (Lubsa Multilub Systems)
  • Plot No.1870, Dabua Gajipur Road, Near Bhardwaj Medical Store, Nit, Faridabad, Haryana - 121001, India
  • Share us via