Faridabad, Haryana, India
Our Products
Manifold are required for mounting of oil distributors. These having two ports of 6mm OD tube and few side outlets. Oil metering cartridge are screwed directly on side outlets of manifolds.
|
Models |
Description |
|---|---|
|
LM-1 |
One way(for single metering cartridge D1 &D2) |
|
LM-2 |
Two way(for two metering cartridge D1 &D2) |
|
LM-3 |
Three way(for three metering cartridge D1 &D2) |
|
LM-4 |
Four way(for four metering cartridge D1 &D2) |
|
LM-5 |
Five way(for five metering cartridge D1 &D2) |
|
LM-6 |
Six way(for six metering cartridge D1 &D2) |
|
LM-8 |
Eight way(for eight metering cartridge D1 &D2) |
|
LM-9 |
Nine way(for nine metering cartridge D1 &D2) |
|
LM-10 |
Ten way(for ten metering cartridge D1 &D2) |
|
LM-1A |
One way(for single metering cartridge D3) |
|
LM-2A |
Two way(for two metering cartridge D3) |
|
LM-3A |
Three way(for three metering cartridge D3) |
|
LM-4A |
Four way(for four metering cartridge D3) |
|
LM-5A |
Five way(for five metering cartridge D3) |
He pneumatic grease pump is suitable for dispensing of grease & automatic feeding of grease to bearing and other moving parts of machines. Such as milling machine, rolling machine, presses & hammers, rubber processing machine, die casting machine, furnaces etc. This pump is suitable for grease upto NLG-2. For distribution we used progressive blocks through this pump. Working Pneumatic grease pump are operated through pneumatic line, connected to the ports of pneumatic cylinder. The cylinder is built in with the pump housing. During on period of the pneumatic line a piston inside the cylinder is pushed ejecting out grease from the outlet port of the pump housing. During the reverse flow of pneumatic line grease is sucked through the suction port. In the pump spring force through follower plate exerted on the top surface of the grease make the suction of the grease positive & easier. Pn. pump is available in adjustable discharge & multiport with adjustable discharge in each port.
|
Models |
LPnGP-1500-10 |
LPnGP-3000-12 |
LPnGP-5000-15 |
|
Reservoir capacity |
1.5Kg. |
3 Kg. |
5 Kg. |
|
Discharge/Storke |
0-10 grams (Adj.) |
0-12 grams (Adj.) |
0-15 grams (Adj.) |
|
Delivery Pressure Max. |
150 Kg/cm2 |
120 Kg/cm2 |
100 Kg/cm2 |
|
Input Pressure |
5-7 Kg/cm2 |
5-7 Kg/cm2 |
5-7 Kg/cm2 |
Dual line system is used where large distance in lubrication point. This is high pressure pump and use in steel plants, cement plants, Turbine generator, furnaces, sugar plants, spong iron plant etc. Dual line lubrication system comprising of a single pumping station having pumping elements and fitted on the outer periphery of the housing. Reservoir also mounted on housing and fitted on base plate with motor, gear box, change over valve, pressure gauge etc. In dual line lubrication pump the pumping elements push the grease at high pressure (up to 250 Kg/cm2) with the help of cam. Cam is driven by speed reduction gear, Grease feed in change over valve from pump elements. Change over valve is to deliver grease through one of the out let ports alternatively after receiving signal from end pressure relay, Distribution of grease at different lubrication point done by Dose feeder and this pump operate by the control panel.
Product Code
End Pressure Relay
It sense the end pressure and gives signal to change over valve through control panel. For checking the pressure two pressure gauge are provided.
Electric Control Panel
Electric control panel is required for operate the lubrication system. Panel has the features main on indication, Manual and auto mode indication, Line one and two on indication, Line fault indication, Motor trip indication, Emergency stop button and other standard control. This control panel is available as per customer requirements.
Grease Transfer Pump
Grease transfer pump is pneumatic version. This pump is directly mounted in the barrel. It transfer the grease to the reservoir of pumping station
