Discharging Ejector Is An Electro-Mechanical Device Which Is Used To Expel The Hot Material From The Re-Heating Furnace To The Rolling Mill. It Has A Mill Housing Type Structure With A Movable Frame And Can Do Both Front And Side Travel For Discharging Of Hot Material(Like Ingots, Billets)From Re-Heating Furnace. It Comes Complete With Heavy Stand, Rollers, Cooling System, Wheel For Cross Travel, Gear Box, Pushing Arrangements Etc. It Uses A Square Billet Of Approx.6 Meters(Or More)Length As The Device To Push The Hot Material Out Of The Re-Heating Furnace. It Is Manufactured Depending On The Size And Capacity Of The Re-Heating Furnace.

A Fly Wheel Is A Heavy Metal Wheel Attached To A Drive Shaft, Having Most Of Its Weight Concentrated At The Circumference, The Main Function Of A Flywheel, Is To Reduce Speed Fluctuation By Strong Extra Energy During Part Load As Kinetic Energy And The Same Is Released During Overloading. By Slowly Increasing The Speed Of A Fly Wheel, Small Motor Can Store Up Energy Which Enables The Motor To Perform A Function For Which It Is Ordinarily Too Small.

These Bearing Chokes Are Of Rolling Mill Duty And Blend In Between Window Of Rolling Mills Stands. These Bearings Chokes Are Suitable For Anti Friction Roller Bearings. The Bearings Chokes Are Of EN-8 Machined Accurately With Bearing Sizes. The Bearings Chokes Are Complete With Side Cover, Sleeves/Lumbering And Chuck Nut.

Cardan Shaft Have Much Higher Mechanical Rating Compared To Parallel Cardan Shaft As The Power Being Transmitted Gets Equally Distributed Among Three To Five Streams In Each Stage Thus Reducing The Induced Stresses Which Very Much Optimizes The Size As Well Allows To Accommodate Higher Ratio To Eliminate Open Pair.

A Speed Increases Stand Generally Installed In A Strip Mill In Between Intermediate Mill Stand To Increase The Output Speed Of The Rolled Product. We Can Manufacture And Supply Double And Triple Output Shafts As Required, Technicalities Of Our Pinion Gear Boxes Are:  Casing/Housing/Structure Material Steel Fabricated.

The Rolls For Re-Rolling Mills Are Manufactured By Forging And Centrifugal Spin Casting Process. The Rolls Manufactured In Alloy Steel Grades Such As EN-9, EN-42, And Unalloyed Grades Like Spheroidal Cast Iron And Chilled Castrolls.

Discharging Ejector Is An Electro-Mechanical Device Which Is Used To Expel The Hot Material From The Re-Heating Furnace To The Rolling Mill. It Has A Mill Housing Type Structure With A Movable Frame And Can Do Both Front And Side Travel For Discharging Of Hot Material(Like Ingots, Billets)From Re-Heating Furnace. It Comes Complete With Heavy Stand, Rollers, Cooling System, Wheel For Cross Travel, Gear Box, Pushing Arrangements Etc. It Uses A Square Billet Of Approx.6 Meters(Or More)Length As The Device To Push The Hot Material Out Of The Re-Heating Furnace. It Is Manufactured Depending On The Size And Capacity Of The Re-Heating Furnace.

Cardan Shaft Have Much Higher Mechanical Rating Compared To Parallel Cardan Shaft As The Power Being Transmitted Gets Equally Distributed Among Three To Five Streams In Each Stage Thus Reducing The Induced Stresses Which Very Much Optimizes The Size As Well Allows To Accommodate Higher Ratio To Eliminate Open Pair.

A Reduction Gear Box Is Used To Reduce An Input Speed To Slower Output Speed .It Is A Wheel Work Consisting Of A Connected Set Of Rotating Gears By Which Poweris Transmitted Or Motion Or Torque Is Changed.We Can Manufacture And Supply Singal Stage, Double Stage Or Multistage Gear Boxes Having Single And Multiple Outputs As Required. From Low Speed To High Speed, Technicalities Of Our Reduction Gear Boxes Are: Normal Input Load Range: Input Load Range From 50H.P.Up To 8000H.P. Drives Gear Type: Spur, Single And Double Helical Gear, Bevel Gears, Worm Gear Box Up To 3500mm Dia..

Spindles Are Used As A Device For Power Transmission And Are Placed Between Couplings. Spindles Are Manufactured Out Of Forged Steel, Basically EN-8 Or EN-9 And Are Properly Machined As Per The Design And Requirement. Our Manufacturing Range Of Spindles Includes: Palm/ Key Groove Type, Star Groove Type