Post Buy Requirement
MB
Mumbai, maharashtra, India
Add Review

Our Products

  1. Hand Tool 9 Products available
  2. Bearings 24 Products available
  3. Others 118 Products available

Other Products / Services

Construction Machinery

During the last decade, CSB has been successfully developed various kinds of self-lubricated bearing materials which are suitable for the applications of undercarriage parts, hydraulic components and so on. These materials include bi-metal marginal lubricating bushings, Metallic Bushings and Metal-polymer composite bushings. These bearing materials boast excellent wear resistance and anti-dust performance under the condition of high load. Meanwhile, the maintenance period is greatly prolonged, the equipment utilization rate is increased and the maintenance cost is reduced by virtue of the self-lubrication technology.
View Complete Details

Oa Equipment

By virtue of simple structure, light weight, no need of oiling, low noise and long service life, CSB self-lubricating bearing is widely used for office automation equipment. Typical applications include joints and reciprocation parts of fax machines, duplicators, paper shredders, scanners and printers.
View Complete Details

Food Machinery

The self-lubricating bearing is featured with no need of oiling or low oil consumption and is free from harmful substances, so it has obvious advantages in the industries with strict requirements on cleanliness and environmental protection such as textile machinery, pharmaceutical machinery, food machinery, beverage canning machinery, etc.
View Complete Details

Automobile

CSB specially develops CSB-50, CSB-40 and CSB-EPB self-lubricating materials meeting RoHs environmental requirements in the automobile field. The self-lubricating bearings are installed at over 30 positions of a passenger car such as tension pulley, air condition compressor, secondary air valve, fuel pump, starting motor, gearbox, steering pump, steering column, shock absorber, braking system, pedal assembly, seat adjustment system, door hinge, trunk hinge, engine hood hinge, windscreen wiper, etc.
View Complete Details

Fitness And Gym Equipment

The self-lubricating bearing is light and with cost-efficiency. At the same time, the maintenance free feature of the bearing provides the optimized applications to different kinds of fitness and Gym equipment.
View Complete Details

Material Handling Machinery

The self-lubricating bearing features free maintenance, low cost and corrosion resistance compared with the traditional rolling bearing and is widely applied to outdoor material handling machinery including trucks, forklifts, lifting platform vehicle, harbor machinery, etc.
View Complete Details

Hydraulic Components

Our company develops self-lubricating metal-polymer bearings suitable for fluid lubrication under heavy load and high speed working conditions which are widely applied to the industries such as gear pump, plunger pump, vane pump, compressor, hydraulic cylinder, etc.
View Complete Details

Plastic Injection Machinery

CSB has introduced the self-lubricating bearing design concept in the field of plastic injection machinery since 1995 and successfully provided various self-lubricating bearings including CSB650, CSB850 and CSB-50 for the world-class plastic injection machine manufacturers. The self-lubricating bearing guarantees the safe and long-acting operation due to low friction, high load, durability and free maintenance.
View Complete Details

Agriculture Machinery

The self-lubricating bearing is widely applied to the positions incapable of lubrication or with difficulty in forming oil film such as hydraulic cylinder, suspension system and key parts of combine-harvesters, seeders, banding machines, pulverizers and tractors owing to the free maintenance and good wear resistance under the working conditions such as dust, outdoor, etc.
View Complete Details

Punch Presser

CSB self-lubricating bearing is commonly used for rotating and sliding worktable parts of machine tools. It greatly cuts down the maintenance cost, prolongs service life, reduces running noise and improves working environment due to low friction coefficient, excellent wear resistance under the condition of impact load as well as self-lubricating property.
View Complete Details

Hydraulic Bottle Jack

  • Brand Name STANLEY
  • Lifting height range 7-1/8” to 14-12” (181-370mm)
  • Capacity 8000kg to 50000 kg (8 ton - 50 ton)
View Complete Details

Plastic Tool Box

3,532 /Piece Get Latest Price
  • Min. Order (MOQ) 3 Piece
  • Brand Name Stanley
  • Size 565 X 315 X 282 mm
  • Features Nickle plating accomplished, Durable, Strong Lock
  • Model No 1-92-908
View Complete Details

Profiled Miniature Guideways

MINI-X = Miniature guideways, micro frictionless tables and integrated distance measuring system
Miniature guideways are compact and precise for maximum productivity

The miniature guideways MINIRAIL, the micro frictionless tables MINISLIDE and the integrated distance measuring systems MINISCALE PLUS, which have a major impact thanks to their degree of precision, robustness and versatility, were developed for high speeds and accelerations in the work process.
View Complete Details

RM RV Guides

Per le guide RMRV a rullini, valgono gli stessi criteri di calcolo
usati per le guide GR. Nei riquadri a pag. 29 si possono rilevare:
il dimensionamento delle gabbie e le capacit di carico relati-
ve. Le guide RMRV si differiscono dai tipi GR per le seguenti
caratteristiche: 1) Capacit di carico notevolmente a favore
delle prime; 2) Costruzione di tavole con una elevata rigidit
superiore ai tipi GR in quanto il passo dei rullini minimo, con
una conseguente maggiore continuit di rotolamento;
3)
Miglior funzionamento nei casi in cui la corsa sia di piccola enti-
t in quanto un rullo di piccolo diametro riesce a lavorare su
tutta la sua circonferenza.Inoltre c la possibilit di precari-
care con pi N, perch come gi detto, le guide RMRV soppor-
tano carichi elevatissimi ed il precarico, percentualmente, in
funzione di questultimi; 4) molto importante, ancor pi che
nei tipi GR a rulli incrociati, curare il sistema di protezione delle
guide
View Complete Details

RM RVA Guides

This rail type completes the system RMRV.The RVA has the
raceways coated with antifriction material. This type is used
when the speed is relatively low (20 mmin max) and the rigid-
ity of the system is critical.A set is composed of two rails RM
ant two rails RVA. The rails RVA and RV are dimensionally inter-
changeable. In order to have a good functioning, the temper-
ature of working must be inferior to 50. Load capacity per unit
in cm
2
changes from 4500 N (dynamic) 7500 N (static). Holes
and oil grooves can be carried out on request on the type RVA
rail
View Complete Details

MV Guides

MVlinear guideways have an antifriction material coat
ing and keep
identical characteristics than RVAs models. As for the dimen-
sions are concerned, they replace the guideways GR but clear-
ly improving their stiffness. These dirt-proof units are used
above all to exclude any vibration of the system.
Load capacity per unit in cm
2
changes from 4500 N (dynamic)
7500 N (static).
View Complete Details

RK Recirculating Unit

The present evolution of the GR type is passing through the rea-
lization of guideways that in spite of their smaller section are
performing better features in respect of the carrying capacity
and therefore of stiffness. This new kind of guideway named NG
has two different sections whose dimensions are stated in the
following page.
View Complete Details

Cam Followers

Cam followers are designed to run directly on surfaces such as cams, ramps, and slide ways. They are used as track rollers, cam followers, and in a wide range of linear motion systems. In order to meet the operating conditions of heavy radial loads usually accompanied by repeated shocks. NIBL cam followers have a heavy section outer ring of high strength steel hardened to 58 62 HR. There is a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower is not parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur due to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. NIBL offers cam followers with a crowned outer ring as a standard feature. Cam followers with cylindrical outer ring are also available, suffix X. To use cam followers with crowned outer ring as bearings, please consult NIBL. Cam followers with full complement of needles offer the maximum dynamic and static load carrying capability, and anti-friction performance, in a compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. This permits operations at high speed. Sealed type cam followers require low maintenance. Their operating temperature is limited due to the grease and seal material which is between -30 C and +100 C. NIBL stud type cam followers consist of a solid stud of high tensile strength with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the other side of the stud. The assembly of these components forms an integrated unit.

Additional Information:

Payment Terms : Western Union

View Complete Details

Linear Guideways System

Nadella is specialised in the design and production of linear guide rail and rollers, divided into heavy and light load families, suitable for all applications where high speed and low noise are required and the operating environment is very aggressive.
Our rails can be supplied with a single length of 6 meters, can be cut and drilled according to the customers needs and can be jointed together.
The main application fields of Nadellas linear guide systems are the following:

Robotic, handler and pick & place systems
Packaging
Machine Tools
Wood Working Machines
Assembly Machines
Measure Instruments
Electro-medical Machines 8.
Print machines
View Complete Details

Mini Hack Saw

171 /Piece Get Latest Price
  • Feature Reliable, easy-to-use
  • Brand Stanley
  • Model Number 20-807
View Complete Details

Prick Punch

  • Min. Order (MOQ) 3 Piece(s)
  • Finish Powder Coated
  • Feature Light Weight, Rust Proof
  • MODEL NO 16-228
View Complete Details

Aviation Snips

  • Brand Name Stanley
  • Features Durability, Double overwind spring for longer life, Excellent for cutting aluminium
View Complete Details

Narrow Belts

Grindwell Norton offers the following products for most dimensioning, intermediate grinding and polishing applications.
PRODUCT OFFERINGS

NORTON ZirKon R809 Belts
NORTON alKon Premium R209 Belts
NORTON alKon R265 Belts
NORTON silKon R409 Belts
NORTON ZirKon R809 Narrow Belts
TYPICAL APPLICATIONS

Benchstand and Backstand Belts
De-burring Fins, runners and risers in castings
Centreless, Conveyor and Platen Belts
Intermediate grinding of stainless steel and carbon steel
Scouring metal surfaces for better adhesion in coil grinding application
FEATURES

Premium Zirconia Alumina grains
Premium synthetic backing
Unique coating process
BENEFITS

Very high cut rate; Long life; Cooler cutting
Greater resistance to tear;
Close koted grains esnure high cut rate with
an acceptable finish
View Complete Details

Flanged Cup

Technical Data

The flanged cup version enables through boring of the housing for simplicity and accuracy.
Benefits

Designed and manufactured in the UK by one of the worlds leading Precision Bearings companies
Cone Bore Run-out tolerances ranging from 0.5 microns to 1.5 microns
Comprehensive range of sizes from 25mm bore upwards
Quality assured to ISO 9000 standards
High quality bearing materials
View Complete Details

Plain Cup

Technical Data

Double row bearings offer nearly twice the capacity of the equivalent single row bearing, and are therefore used in more heavily loaded applications.

The plain outer race enables this bearing to be used in a 'floating' position to permit thermal expansion. As such it can replace a P type bearing when additional load capacity is required.

G type bearings can be preadjusted to give GE double row bearings. This is achieved by fitting a spacer between the inner races to give the required assembly end play or preload. The choice of setting is based upon a number of parameters such as speed, lubrication and applied loads. Spacer width is adjusted individually prior to despatch.

For further advise contact Gamet Bearings.
View Complete Details

Flanged Cup (H Type)

Technical Data

Double row bearings offer nearly twice the capacity of the equivalent single row bearing, and are therefore used in more heavily loaded applications.

This double row bearing has a flanged outer ring which locates the shaft axially. This can also simplify housing machining operations and overall design.

H type bearings can be preadjusted to give HE double row bearings. This is achieved by fitting a spacer between the inner races to give the required assembly end play or preload. The choice of setting is based upon a number of parameters such as speed, lubrication and applied loads. Spacer width is adjusted individually prior to despatch.

For further advise contact Gamet Bearings.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Chirag Mehta (Mehta Brothers)
  • B-4, Kailash Explande, Opposite Shreyash Cinema L. B. S. Marg, Ghatkopar West, Mumbai-400086, Maharashtra, India
  • Share us via
oa equipment Automobile Retailer from Mumbai, maharashtra
Post Buy Requirement
MB
Mumbai, maharashtra, India
Add Review

Our Products

  1. Hand Tool 9 Products available
  2. Bearings 24 Products available
  3. Others 118 Products available

Other Products / Services

Construction Machinery

During the last decade, CSB has been successfully developed various kinds of self-lubricated bearing materials which are suitable for the applications of undercarriage parts, hydraulic components and so on. These materials include bi-metal marginal lubricating bushings, Metallic Bushings and Metal-polymer composite bushings. These bearing materials boast excellent wear resistance and anti-dust performance under the condition of high load. Meanwhile, the maintenance period is greatly prolonged, the equipment utilization rate is increased and the maintenance cost is reduced by virtue of the self-lubrication technology.
View Complete Details

Oa Equipment

By virtue of simple structure, light weight, no need of oiling, low noise and long service life, CSB self-lubricating bearing is widely used for office automation equipment. Typical applications include joints and reciprocation parts of fax machines, duplicators, paper shredders, scanners and printers.
View Complete Details

Food Machinery

The self-lubricating bearing is featured with no need of oiling or low oil consumption and is free from harmful substances, so it has obvious advantages in the industries with strict requirements on cleanliness and environmental protection such as textile machinery, pharmaceutical machinery, food machinery, beverage canning machinery, etc.
View Complete Details

Automobile

CSB specially develops CSB-50, CSB-40 and CSB-EPB self-lubricating materials meeting RoHs environmental requirements in the automobile field. The self-lubricating bearings are installed at over 30 positions of a passenger car such as tension pulley, air condition compressor, secondary air valve, fuel pump, starting motor, gearbox, steering pump, steering column, shock absorber, braking system, pedal assembly, seat adjustment system, door hinge, trunk hinge, engine hood hinge, windscreen wiper, etc.
View Complete Details

Fitness And Gym Equipment

The self-lubricating bearing is light and with cost-efficiency. At the same time, the maintenance free feature of the bearing provides the optimized applications to different kinds of fitness and Gym equipment.
View Complete Details

Material Handling Machinery

The self-lubricating bearing features free maintenance, low cost and corrosion resistance compared with the traditional rolling bearing and is widely applied to outdoor material handling machinery including trucks, forklifts, lifting platform vehicle, harbor machinery, etc.
View Complete Details

Hydraulic Components

Our company develops self-lubricating metal-polymer bearings suitable for fluid lubrication under heavy load and high speed working conditions which are widely applied to the industries such as gear pump, plunger pump, vane pump, compressor, hydraulic cylinder, etc.
View Complete Details

Plastic Injection Machinery

CSB has introduced the self-lubricating bearing design concept in the field of plastic injection machinery since 1995 and successfully provided various self-lubricating bearings including CSB650, CSB850 and CSB-50 for the world-class plastic injection machine manufacturers. The self-lubricating bearing guarantees the safe and long-acting operation due to low friction, high load, durability and free maintenance.
View Complete Details

Agriculture Machinery

The self-lubricating bearing is widely applied to the positions incapable of lubrication or with difficulty in forming oil film such as hydraulic cylinder, suspension system and key parts of combine-harvesters, seeders, banding machines, pulverizers and tractors owing to the free maintenance and good wear resistance under the working conditions such as dust, outdoor, etc.
View Complete Details

Punch Presser

CSB self-lubricating bearing is commonly used for rotating and sliding worktable parts of machine tools. It greatly cuts down the maintenance cost, prolongs service life, reduces running noise and improves working environment due to low friction coefficient, excellent wear resistance under the condition of impact load as well as self-lubricating property.
View Complete Details

Hydraulic Bottle Jack

  • Brand Name STANLEY
  • Lifting height range 7-1/8” to 14-12” (181-370mm)
  • Capacity 8000kg to 50000 kg (8 ton - 50 ton)
View Complete Details

Plastic Tool Box

3,532 /Piece Get Latest Price
  • Min. Order (MOQ) 3 Piece
  • Brand Name Stanley
  • Size 565 X 315 X 282 mm
  • Features Nickle plating accomplished, Durable, Strong Lock
  • Model No 1-92-908
View Complete Details

Profiled Miniature Guideways

MINI-X = Miniature guideways, micro frictionless tables and integrated distance measuring system
Miniature guideways are compact and precise for maximum productivity

The miniature guideways MINIRAIL, the micro frictionless tables MINISLIDE and the integrated distance measuring systems MINISCALE PLUS, which have a major impact thanks to their degree of precision, robustness and versatility, were developed for high speeds and accelerations in the work process.
View Complete Details

RM RV Guides

Per le guide RMRV a rullini, valgono gli stessi criteri di calcolo
usati per le guide GR. Nei riquadri a pag. 29 si possono rilevare:
il dimensionamento delle gabbie e le capacit di carico relati-
ve. Le guide RMRV si differiscono dai tipi GR per le seguenti
caratteristiche: 1) Capacit di carico notevolmente a favore
delle prime; 2) Costruzione di tavole con una elevata rigidit
superiore ai tipi GR in quanto il passo dei rullini minimo, con
una conseguente maggiore continuit di rotolamento;
3)
Miglior funzionamento nei casi in cui la corsa sia di piccola enti-
t in quanto un rullo di piccolo diametro riesce a lavorare su
tutta la sua circonferenza.Inoltre c la possibilit di precari-
care con pi N, perch come gi detto, le guide RMRV soppor-
tano carichi elevatissimi ed il precarico, percentualmente, in
funzione di questultimi; 4) molto importante, ancor pi che
nei tipi GR a rulli incrociati, curare il sistema di protezione delle
guide
View Complete Details

RM RVA Guides

This rail type completes the system RMRV.The RVA has the
raceways coated with antifriction material. This type is used
when the speed is relatively low (20 mmin max) and the rigid-
ity of the system is critical.A set is composed of two rails RM
ant two rails RVA. The rails RVA and RV are dimensionally inter-
changeable. In order to have a good functioning, the temper-
ature of working must be inferior to 50. Load capacity per unit
in cm
2
changes from 4500 N (dynamic) 7500 N (static). Holes
and oil grooves can be carried out on request on the type RVA
rail
View Complete Details

MV Guides

MVlinear guideways have an antifriction material coat
ing and keep
identical characteristics than RVAs models. As for the dimen-
sions are concerned, they replace the guideways GR but clear-
ly improving their stiffness. These dirt-proof units are used
above all to exclude any vibration of the system.
Load capacity per unit in cm
2
changes from 4500 N (dynamic)
7500 N (static).
View Complete Details

RK Recirculating Unit

The present evolution of the GR type is passing through the rea-
lization of guideways that in spite of their smaller section are
performing better features in respect of the carrying capacity
and therefore of stiffness. This new kind of guideway named NG
has two different sections whose dimensions are stated in the
following page.
View Complete Details

Cam Followers

Cam followers are designed to run directly on surfaces such as cams, ramps, and slide ways. They are used as track rollers, cam followers, and in a wide range of linear motion systems. In order to meet the operating conditions of heavy radial loads usually accompanied by repeated shocks. NIBL cam followers have a heavy section outer ring of high strength steel hardened to 58 62 HR. There is a lubrication groove on the outer ring, which prevents the introduction of impurities into the bearing scaling and galling of the bearing track. The convex (crowned) outer ring tolerating out-of-parallelism of contact surfaces. Crowned outer rings are used where the axis of the cam follower is not parallel to the surface of the track or is skewed relative to the direction of travel. Outer ring with crowned outside surface supports high radial loads and reduces edge stresses which occur due to misalignment. Crowned outer rings are best suited in applications with curved or circular tracks. NIBL offers cam followers with a crowned outer ring as a standard feature. Cam followers with cylindrical outer ring are also available, suffix X. To use cam followers with crowned outer ring as bearings, please consult NIBL. Cam followers with full complement of needles offer the maximum dynamic and static load carrying capability, and anti-friction performance, in a compact design. Cage-guided cam followers provide large space for grease, helpful in applications where re-lubrication is infrequent. This permits operations at high speed. Sealed type cam followers require low maintenance. Their operating temperature is limited due to the grease and seal material which is between -30 C and +100 C. NIBL stud type cam followers consist of a solid stud of high tensile strength with an integral rib on one side, thick-walled outer ring, rolling elements set and a thrust washer pressed on to the other side of the stud. The assembly of these components forms an integrated unit.

Additional Information:

Payment Terms : Western Union

View Complete Details

Linear Guideways System

Nadella is specialised in the design and production of linear guide rail and rollers, divided into heavy and light load families, suitable for all applications where high speed and low noise are required and the operating environment is very aggressive.
Our rails can be supplied with a single length of 6 meters, can be cut and drilled according to the customers needs and can be jointed together.
The main application fields of Nadellas linear guide systems are the following:

Robotic, handler and pick & place systems
Packaging
Machine Tools
Wood Working Machines
Assembly Machines
Measure Instruments
Electro-medical Machines 8.
Print machines
View Complete Details

Mini Hack Saw

171 /Piece Get Latest Price
  • Feature Reliable, easy-to-use
  • Brand Stanley
  • Model Number 20-807
View Complete Details

Prick Punch

  • Min. Order (MOQ) 3 Piece(s)
  • Finish Powder Coated
  • Feature Light Weight, Rust Proof
  • MODEL NO 16-228
View Complete Details

Aviation Snips

  • Brand Name Stanley
  • Features Durability, Double overwind spring for longer life, Excellent for cutting aluminium
View Complete Details

Narrow Belts

Grindwell Norton offers the following products for most dimensioning, intermediate grinding and polishing applications.
PRODUCT OFFERINGS

NORTON ZirKon R809 Belts
NORTON alKon Premium R209 Belts
NORTON alKon R265 Belts
NORTON silKon R409 Belts
NORTON ZirKon R809 Narrow Belts
TYPICAL APPLICATIONS

Benchstand and Backstand Belts
De-burring Fins, runners and risers in castings
Centreless, Conveyor and Platen Belts
Intermediate grinding of stainless steel and carbon steel
Scouring metal surfaces for better adhesion in coil grinding application
FEATURES

Premium Zirconia Alumina grains
Premium synthetic backing
Unique coating process
BENEFITS

Very high cut rate; Long life; Cooler cutting
Greater resistance to tear;
Close koted grains esnure high cut rate with
an acceptable finish
View Complete Details

Flanged Cup

Technical Data

The flanged cup version enables through boring of the housing for simplicity and accuracy.
Benefits

Designed and manufactured in the UK by one of the worlds leading Precision Bearings companies
Cone Bore Run-out tolerances ranging from 0.5 microns to 1.5 microns
Comprehensive range of sizes from 25mm bore upwards
Quality assured to ISO 9000 standards
High quality bearing materials
View Complete Details

Plain Cup

Technical Data

Double row bearings offer nearly twice the capacity of the equivalent single row bearing, and are therefore used in more heavily loaded applications.

The plain outer race enables this bearing to be used in a 'floating' position to permit thermal expansion. As such it can replace a P type bearing when additional load capacity is required.

G type bearings can be preadjusted to give GE double row bearings. This is achieved by fitting a spacer between the inner races to give the required assembly end play or preload. The choice of setting is based upon a number of parameters such as speed, lubrication and applied loads. Spacer width is adjusted individually prior to despatch.

For further advise contact Gamet Bearings.
View Complete Details

Flanged Cup (H Type)

Technical Data

Double row bearings offer nearly twice the capacity of the equivalent single row bearing, and are therefore used in more heavily loaded applications.

This double row bearing has a flanged outer ring which locates the shaft axially. This can also simplify housing machining operations and overall design.

H type bearings can be preadjusted to give HE double row bearings. This is achieved by fitting a spacer between the inner races to give the required assembly end play or preload. The choice of setting is based upon a number of parameters such as speed, lubrication and applied loads. Spacer width is adjusted individually prior to despatch.

For further advise contact Gamet Bearings.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Chirag Mehta (Mehta Brothers)
  • B-4, Kailash Explande, Opposite Shreyash Cinema L. B. S. Marg, Ghatkopar West, Mumbai-400086, Maharashtra, India
  • Share us via