Mumbai, Maharashtra, India
Verified
Add Review
Our Products
General Qualities & Characteristics
Mex solube cut is a specially compounded emulsifying cutting oil composed of a petroleum oil and special emulsifiers. It mixes readily with hot or cold water. It forms homogenous and exceptionally stable emulsions, which show no apparent separation after long periods of usage or storage. It also incorporates special biocides to increase coolant life and prevent unpleasant odors experienced as a result to bacterial infection. Meets the specification requirements of IS 1115-1986 and DEF STAN 91323/1(Grade ZX - 1)
Application Requirements :
Metal cutting and grinding operations generate heat. The prime requirement, therefore, is to select a fluid, which will reduce generation and increase dissipation of heat. The effectiveness with which this is accomplished has a direct bearing on increasing feed, speed, tool life, and improving surface finish. An efficient and economical way to control heat is to use the excellent cooling properties of water, combined with the lubricating properties of oil. Additionally, an effective cutting and grinding fluid must contain anticorrosion properties to protect the work piece during the manufacturing process. Another characteristic which enhances it usefulness is stability, whether in use or in storage. Recommendations Mex soluble cut is preferred choice for grinding and for machining operations where is of utmost importance. It meets the basic application requirements described above in highly satisfactory and economical manner. Mex soluble cut is usually diluted to oil/water ratios ranging from 1:10 to 1:60. because there are so many variables to be considered from job-to-job, it is impractial to make a specific recommendation of optimum oil to water ratios. However, in general, the richer emulsions are used for the more difficult jobs, the intermediate for the free-machining metals and the lean mixtures when preparing emulsions of Mex soluble cut, always add oil to water. Stability of the emulsions is enhanced when it is put through a homogenzation processes.
Available Packaging: 26Ltr, 50Ltr and 210Ltr.
General Qualities & Characteristics
Mex Transformer oil is an uninhibited electrical insulating fluid, for use in electrical systems where rapid heat transmissions and high oxidation stability are required. They meet the specification requirements of IEC 296 class II:1982standard specification.
Applications : Mex Transformer Oil is primarily intended for use in : Transformers, Circuit Breakers, OIl Filed Switches an insulator and are extinguishing agent in switchgear and circuit breakers.
Performance Features Highly resistant to oxidation degradation : It resists the formation of oxidation products that can reduce the ability of the oil to insulate and cool electrical windings
Rapid Heat Transfer- an essential quality in electrical insulating systems.
Compatible with construction materials - Compatible with all common construction materials used in electrical systems.
Outstanding low temperature properties - without the need for pour point depressants.
Available Packaging: 26Ltr, 50Ltr and 210Ltr.
Mex Ep-2 Grease is a premium quality brown colour lithium soap fortified with EP additives with other performance additives base grease having excellent mechanical and thermal stability made with MVI oils for Extreme - Pressure industrial application.
Applications:
Used in Heavy-duty Bearings and General industrial lubrication. Also used in heavy duty plan rolling element bearings which are operating under severe conditions including shock loading and in presence of water. It can be used for water pumps universal joints and general purpose industrial machinery.
Performance Futures & Benefits :
good load carrying capacity contains EP additives, which enable them to withstand heavy load without failure of lubricant film. Good mechanical stability - This is particularly important in vibrating environments where poor mechanical stability can lead to grease softening with subsequent loss of lubrication performance and leakage. Good resistance to water washout - It offers resistance to water washout. High oxidation stability - Specially selected base oils offer good oxidation resistance. Good corrosion resistance characteristics - Protects bearing surfaces against corrosion. All round protection for both anti-friction and plain bearing lubrication. Provide excellent lubrication for bearings and industrial applications. It meets BIS 7623- 1993 Regular Type Grade specification.
Available Packaging: 26Ltr, 50Ltr and 210Ltr.
Mex Pump Set Oils is formulated with high quality paraffinic base stocks, detergents, dispersants, oxidation and corrosion inhibitors, antiwear and antifoam additives.
Available Packaging: 26Ltr, 50Ltr and 210Ltr.
General Qualities & Characteristics
Mex white oils are highly refined medicinal food grade oils and are manufactured to meet rigorous standards laid down in pharmacopoeias.
Product Applications :
Available Packaging: 26Ltr, 50Ltr and 210Ltr.
This range of oil is specially designed for the lubrication of all loss systems found in textile looms. A wide range of viscosity grades provides the correct choice of lubricants for all kinds of application. These oil perform equally well for both boundary as well as dynamic lubrication conditions. Recommended for all models of SULZER looms and similar machineries.
Available Packaging: 26Ltr, 50Ltr and 210Ltr.
General Qualities & Characteristics
Mex Rotospin is a range of high quality spindle lubricants for use on modern textile machines. Manufactured from the highest quality base stocks and ashless addivitives, it reduces spindle wear, protects against rust and may be easily removed by washing if textile contamination occurs.
Application Requirements :
Modern textile machine spindles work at high speeds and high loads. With conventional spindle lubricants, sludge, carbonaceous deposits and excessive spindle wear can occur. Mex Rotospin has been formulated with special additives to reduce the formation of harmful deposits. It reduces power consumption and protects spindle surface from rust and corrosion. The low coefficents of static and kinetic friction of Mex Rotospin reduces starting torque and operating temperatures, which further reduces power consumption. Mex Rotospin is approved by Hino Motors.
Recommendations :
Mex Rotospin is recommended for the lubrication of high speed spindles in textile industry. Should contamination occur, Mex Rotospin can be removed by washing and will not usually interfere with the subsequent processing and dyeing of textiles. Mex Rotospin is also recommended as a machine tool spindle oil where low visocosity R&O type lubricants are specified.
Mex Rotospin Offers
Available Packaging: 26Ltr, 50Ltr and 210Ltr.
Mex Quench Oils are general purpose straight mineral quenching oil manufactured from selected crudes of the paraffin type. These grades are refined by an exclusive finishing process an advanced hydrogen refining process which enhances the high resistance to oxidation, long service life and low carbon residue of these quenching oils. Meets the requirements ofIS 2664-1980, Straight mineral oils.
Application Requirements : Although fast quenching oil are required for many applications most oil quenching is still performed in conventional, oil of the type exemplified by Mex Quench Oils. With conventional oil, the quenching actions is characterized by a vapor blanket stage which is characterized by a vapor blanket stage which is fairly short, along with a boiling stage that ceases to function at a temperature which is in the vicinity of the Ms point for many steels. The third stage, which begins when boiling stops, lasts longer than does that of water and accounts for the tendency of mineral quenching oil to cause minimum distortion.
Mex Recommendations : Choice of proper quenching oil depends on the analysis of the steel being treated, the hardness desired, the shape and size of the piece, the analysis of the quenching systems and the degree of agitation employed - to name a few of the important variables.
Mex Meta Quench Oil 22 and 33 are recommended for heat treating high harden ability point resistance to oxidation of these oil provides unifor hardening with minimum discoloration, improved grain structure, and long bath life.
Mex Meta Quench 68meets the specifications of (IS2664 1980) straight mineral, heavy type.
Available Packaging: 26Ltr, 50Ltr and 210Ltr.
FLUSHING OIL is depending on the crude oil source used for manufacture which gives a distribution of paraffinic, napthanic and aromatic oils in the product.
PROPERTIES :
Health & Safety: See corresponding product MSDS
Available Packaging: 26Ltr, 50Ltr and 210Ltr.
General Qualities & Characteristics
Mex Therm Oils are mineral oil type heat transfer oil for use in indirect or secondary heating systems. In such systems, fuel oil, gas or electricity is used to heat fluid, which then transfers the heat to the point of application. Mex Therm oils are manufactured from selected refined paraffinic oil to give excellent resistance to thermal cracking and chemical oxidation. In addition, they are noncorrosive, nontoxic, have a very low odor level and have no detrimental effect on selected seals. These oils are designed for use in closed, forced circulation systems equipped with expansion tanks.
APPLICATION REQUIREMENTS : Mex Therm Oils, can be used upto a bulk oil temperature of 315 °C and will stand skin temperatures upto 315 °C to 317 °C. Mex Therm have high specific heat and thermal conductivity at all temperatures and, therefore, will give rapid heating and flexibility in a system. The characteristic of these products make them ideal where high heat transfer rates combined with high flow rates are desired. Mex Therm is especially suited for systems where heating and cooling cycles are required since it functions effectively at both high and low temperatures and repeated thermal cycles. The application limits of heat transfer oil depend first on circulating speed, and second on temperature in closed circuit systems. In general, the minimum velocities Vs. temperatures are shown in the following table.
Available Packaging: 26Ltr, 50Ltr and 210Ltr.
Application : Mex lubricant’s premium way lubes are specially formulated products developed for the lubrication of machine tool ways and slides. These oil are exclusively recommended for machine tools, which have combined hydraulic and way lubrication systems. These oil possess adequate tools, which have combined hydraulic and way lubrication systems. These oil possess adequate lubricity to eliminate stick-slip and chatter under moderate load conditions and at the same time serve as hydraulic media in non-cricital systems
Performance features & Benefits : They eliminate stick-slip or table chatter by reducing friction between mating surfaces. Where ways are heavily loaded they provided film strength and excellent EP protection. These PREMIUM WAYLUBES have metal wetting and adhesive agents that enable them to form uniform films that resist squeezing from way surfaces while machine is not in operation. By preventing stick-up, the wear of way surfaces is minimized and their service life is greatly extended.
Available Packaging: 26Ltr, 50Ltr and 210Ltr.
General Qualities & Characteristics
Cutting Oil are intended for lubrication and cooling of metal surface during metal cutting operations. “Neat” cutting oil are different from”soluble” cutting oil in that the former is immiscible with water. Cutting Oils Containing ‘Free’ sulfur would not be suitable for non-ferrous metals in view of the staining of the latter. Cutting Oil intended for nonferrous metals are mineral oils with or without added fatty oil, and the fatty oil may also be sulphurised in order to provide Extreme Pressure (E.P.) Properties but does not contain any free sulfur. Accordingly, there are three types of Neat cutting Oil. (as per bureau of Indian Standards.)
Type 1 : Mineral oil without added sulphur, having different viscosities, depending on the addition of fatty oil and intended for general machining of mild brass steel, brass and light alloys.
Type 2 : Mineral oil blended with sulphurised fatty oils which is non-staining and intended for use with non-ferrous metals and varying in viscosity.
Type 3 : Sulphurised mineral oil which is staining and intended for use with ferrous metals and only. Neat Cut differ mainly in their content of fatty oil and their content of sulphurised additives has lesser SAP and more additives, is recommended for heavy duty, high speed load conditions for low speed, low load versions of same combination of the material-tool-and-machine.
Available Packaging: 26Ltr, 50Ltr and 210Ltr.
Mex Friz Oils is a range of premium quality, mineral oils for the lubrication of refrigeration and air-conitioning compressors when refrigerants other than HFCs (hydro fluorocarbons) are used. Made from special, narrow-cut naphtenic oils, practically wax-free, for extremely low pour and floc points. They meet the specification requirements of DIN 51503 KC and British Standards BS 2626:1975 In addition they also meet the specification requirements of IS 4578 - 1968and carrier corporation, USA PP 46-1.
Application Requirements : The lubricants to be used in refrigeration and air-conditon compressor must have very low pour and freon floc points to prevents loss of fluidity and formation of wax deposits at the low temperatures they work on. They also must have long oil service life through excellent oxidation stability and must protect the equipment reliably and efficiently. They also must minimize formation of gums, varnish and other sludge deposits, besides minimizing carry-over by resisting foaming.
Recommendations : Mex Friz Oils is recommended for use in reciprocating and rotary refrigeration and air conditioning compressors. They low Freon floc permits the operation of these systems at very low evaporator temperatures. Mex Friz Oils is suitable for use a wide range of refrigerants including ammonia, carbon dioxide, sulphur dioxide, methylene chloride and chlorofluorocarbons (CFCs) like R-12and R - 22.
Available Packaging: 26Ltr, 50Ltr and 210Ltr.
General Qualities & Characteristics
Di-Electric Fluid Mex EDM 250 is a special fluid, developed by Mex Oil for Electrical discharge machines utilized to produce very fine and intricate cuts and profiles. EDM250works very well when machining graphite electrodes.
Applications
Performance Futures & Benefits : Approved for use in nuclear facilities. Reduces DC Arcing, Reduced chances of fire due to high flash point, Longer Fluid life. Proven field performance , More rapid flushing at point of cut because of a lower viscosity, Cleaner and clearer, High API gravity allows rapid settling of particles in filter, Extremely low odour levels from EDM 250 at the time of initial fill and after many hundreds of working hours, Environmentally safer due to the worker’s health at the aromatic and sulphur content are almost undetectable under laboratory conditions versus your typical EDM fluids now in use, Reduced polishing time of molds because of higher dielectric strength.
Available Packaging: 26Ltr, 50Ltr and 210Ltr.
General Qualities & Characteristics
Industrial Gearbox Oils is a range of light colored premium quality heavy duty industrial gear oil, which have been developed for the lubrication of enclosed gears working under severe operating conditions. They are formulated form the highest quality paraffinic base oil and incorporate Sulphur-Phosphorus type Extreme Pressure and other agents that provide excellent protection against foaming, rust and corrosion.
Application Requirements : Modern, highly rated industrial gear unit friendly have high tooth loadings resulting from the transmission of greater power through smaller and more compact units. Consequently, gear oil must have superior load carrying and friction reducing properties together with high existence to oxidation. Mex Industrial Gear ensures optimum gear wear characteristics and protection against rust and corrosion. The Sulphur-Phosporus agent is resistant to chemical degradation due to the effects of heat and allows.
Recommendations : Mex Industrial Gear is primarily recommended for enclosed industrial gear units operating under severe shock loading condition. They may be used in enclosed spur, helical, and worm gears, their frictional characteristics are particularly beneficial in worm gears.
Available Packaging: 26Ltr, 50Ltr and 210Ltr.
Mex hurricane SAE 15w40 available in SAE 15w40, Viscosity grade, is a high quality engine oil for use in high output, turbo charged diesel engines. These products have been developed to exceed API service classifications, CE, CD-II and SF, and meet the requirements of European high-speed diesel engine manufacturers for extended drain periods, including ACEA E2/E3. The total base number (TBN) of 10.0 minimum provides the necessary reserve alkalinity to protect vital engine parts against corrosion and premature engine wear over extended periods.
Available Packaging: 26Ltr, 50Ltr and 210Ltr.
Automotive Transmission Oils
is formulated with high quality paraffinic base stocks, detergents, dispersants, oxidation and corrosion inhibitors, antiwear and antifoam additive. ATF-A may be used for automatic and semiautomatic gearboxes, powersteering and other equipment for witch an ATF –A type mineral oil fluid is recommended.
PROPERTIES :
Health & Safety : See corresponding product MSDS.
Available Packaging: 26Ltr, 50Ltr and 210Ltr.
Construction Equipment Oil is suitable for use in many older vehicles and a few late model cars and trucks, often those with larger 6-cylinder and V-8 and/or high performance engines. SAE Consrtuction Equipment Oils is also designated as a Resource Conserving lubricant by API.
PROPERTIES :
Available Packaging: 26Ltr, 50Ltr and 210Ltr.
PNUMATIC 46, 100, 220
PNEUMATIC TOOLS OILS are specially formulated with extreme pressure, tackiness, anti-agents.
APPLICATION AREAS :
These lois are recommended for LUBRICANT OF PNEUMATIC EQUIPMENT such as rock drills, jack hammers, chippers, wagon drills etc and used in small in-plant Pneumatic tools like, ginders, filing tools, drills tappers, impact wrenches, riveters, hoists etc.
PERFORMANCE BENEFITS :
Available Packaging: 26Ltr, 50Ltr and 210Ltr.
DESCRIPTION :-
MEX Grease MP is a premium quality lithium soap, multi-purpose automotive grease, with high drop point, good thermal and structural stability and also having resistance against water wash out. With its smooth structure and high degree of resistance against oxidation and rusting/corrosion it is an ideal product for all grease lubricated parts of automotive equipment.
APPLICATION :-
MEX Grease MP is recommended for water pump, wheel bearings, chassis fittings and universal joints, including those of constant velocity type, for mobile equipment e.g., automotive, off- highway equipment such as tractors, construction equipment etc.
PERFORMANCE STANDARDS :-
MEX Grease meets IS:12203:1987 (Reaffirmed 1993)
PROPERTIES :-
HEALTH & SAFETY : These oils are unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of industrial and personal hygiene are maintaine.
Available Packaging: 26Ltr, 50Ltr and 210Ltr.
General Qualities & Characteristics
Mex hydro AW is a range of superior quality antiwear type hydraulic oils blended from high quality base stocks selected additives formulated primarily as heavy duty, antiwear hydraulic oils with excellent water separating characteristics. They are suitable for use in most modern hydraulic control systems incorporating a wide variety of pump design. Their excellent performance characteristics as hydraulic oils also make them equally suitable as lubricating oils in a wide range of industrial applications.
Application Requirements :
In modern high pressure hydraulic systems, articulary those incorporating vane type pumps, high metal-to-metal pressures can result in a breakdown of the fluid lubricating oil film with consequent high and unacceptable wear rates. The special zic / phosphorus antiwar additive incorporated in Mex hydro AW prevents such excessive wear and ensures long pump and valve life. Mex hydro AW and offers excellent air release properties. It also has excellent water separation properties for damp conditions caused by water leakage or condensation through reservoir breather pipes.
Recommendations :
Mex hydro AW is recommended in vane, axial piston, gear and other types of hydraulic pumps and motors at oil pressures in the range of 69 - 345 bar (1, 000 - 5, 000 PSI), It may be used in a wide variety of applications including airline lubricators, bearings, high speed spindles, hydrostatic transmissions, hydraulic couplings and some gear units, it has many uses in construction plant equipment, machine tools and general industrial equipment and the heavier viscosity grades may be used for gear lubrication where an EP type gear oil is not required. The appropriate Mex hydro AW viscosity grades should be determined by the equipment manufactures recommendations.
Available Packaging: 26Ltr, 50Ltr and 210Ltr.
We are offering automotive gear oil in the industry. The automotive gear box oils offered by us are formulated to be used in gear boxes that require high pressure properties for hypoid and bevel gears. Our automotive gear oils are multi –grade oils that facilitate easy gear shifting at low ambient temperature. We are one of the major gear oils manufacturers and suppliers in india.
| |
| |
|
We are specialized in the manufacturing superior quality Diesel Engine Oil that is widely demanded in the national as well as international markets. Our Heavy Duty Diesel Engine Oils are effective in performance and are used for easy and frictionless movement of the component of engine. These Diesel Engine Oils are made from good quality base oils using the latest technology. In addition to this, we are one of the prominent Automotive Diesel Engine Oils Exporters in India.
| |
|
Specifications
| Grade Name Ratio spin | 15w 40 CF-4 | 15 w 40 CI-4 |
|---|---|---|
| K.V.cST 100 oC | 14-16 | 14-16 |
| V.I.Min | 120 | 125 |
| Flash Points COC, oCMin | 200 | 200 |
| Pour Point, oC Max | -27 | -24 |
| TBN mg KOH/g Typ | 8 | 13 |
We are offering metal working oils in the industry. The industrial metal working oils catered by us are soluble cutting oils made from refined mineral oil, emulsifier and other additives forming stable milky emulsion. Metal working oils are used where cooling is more important than the lubrication. They do not decompose chemically and leave objectionable odor. Furthermore, we are one of the ace synthetic metal working oils manufacturers and exporters in india.
| |
| |
|
Specifications
| Grade Name soluble cutting oils | Soluble cut White | Cut Cool All |
|---|---|---|
| K.V. cST 40oC | 52 | 65 |
| Emulsion test 600 ppm Hard water | No Oil / No Cream | No Oil / No Cream |
We provide the Multi Grade Heavy Duty Diesel Engine Oil that is much demanded across the globe for the premium formulation & excellent properties. This has also enhanced the demand of the Multi Grade Heavy Duty Diesel Engine Oil in the global market. We offer the Multi Grade Heavy Duty Diesel Engine Oil in proper packaging at reasonable price.
ApplicationsRecommended for all types of Diesel Vehicles :Specifications
| Grade Name | 20 W40 | 20 W 40 Plus |
|---|---|---|
| K.V. CST 100oC | 14-16 | 14-16 |
| V. I. Min | 110 | 110 |
| Flash Points COC, OC Min | 200 | 200 |
| Pour Point, OC Max | -21 | -21 |
| TBN mg KOH/g Typ | 5.4 | 5.4 |
| Colour | Red | Red |
Available with us is the Soluble Cutting Oil. The Soluble Cutting Oil is recommended for use in variety of cutting operations on ferrous and non-ferrous materials. The Soluble Cutting Oil is used at water to oil ratios between 20:1 and 30:1. Cut cool all is recommended for use in Aluminum Machining. This product can also be used for machining of ferrous and copper-based alloys. Therefore, it allows versatility of operations in terms of metal being machined at the same machine tool.
Specifications
| Grade Name Soluble cutting oils | Soluble Cut white | Cut Cool All |
|---|---|---|
| KV cST 40oC | 52 | 65 |
| Emulsion test 600 ppm Hard Water | No Oil/No Cream | No Oil/No Cream |
For the best quality We are offering straight cutting oils, we are the perfect destination in the international market. Straight cutting oils contains active sulphur that provides additional ep properties. Straight cutting oils are used for cutting on the materials difficult to machine like tough steels. In addition to this, we are counted among the eminent active straight cutting oils manufacturers in the country.
| |
| |
| |
|
Specifications
| Grade Name cut straight oils | Cut Straight A | Cut Straight B | Cut Straight C | Cut Straight D |
|---|---|---|---|---|
| K.V. cST 40oC | 20.1 | 34.7 | 13.3 | 32.0 |
| Sulphur | Inactive | Inactive | Inactive | Inactive |
| Flash Points COC, oC Min | 158 | 166 | 180 | 226 |
| Specification No. mg. KOH/g | 3.01 | 7.3 | 4 | 4 |
We are specialized in offering optimum quality Vacuum Oil in the market place. We have carved a niche for ourselves among the renowned High Vacuum Oil Manufacturers. Vacuum Pump Oils are formulated from very high viscosity index base stocks, which are deep refined additives to excellent thermal stability and extreme pressure properties. This Vacuum Oil is mainly used in every type of diffusion pumps in vacuum system.
| |
|
Specifications
| Grade Name | Mex MP Gr EASE-3 |
|---|---|
| Type of Soap | Lithium |
| Work Penetration At 25c | 220-250 |
| Drop point C | 194 |
We offer EP Grade Automotive Gear Oil that is demanded by the clients for the premium quality. The EP Grade Automotive Gear Oil is used where manual transmissions of automobiles requiring this type of extreme pressure oils. The clients can avail the EP Grade Automotive Gear Oil from us at suitable deal.
ApplicationsSpecifications
| Grade Name gear Oils EP | EP 80 | EP 90 | EP 140 | 80 W 90 |
| K.V. CST 100oC | 11-12.3 | 14.5-17.3 | 28-33 | 13.5-24.00 |
| V. I. Min | 90 | 90 | 90 | 90 |
| Flash Points COC, OC Min | 210 | 210 | 220 | 220 |
| Pour Point, OC Max | -6 | -6 | -6 | -6 |
We hold specialization in offering Extra Heavy Duty Diesel Engine Oil. The Extra Heavy Duty Diesel Engine Oil, we offer, is much demanded by the clients due to its excellent formulation and remarkable properties. We provide the Extra Heavy Duty Diesel Engine Oil to the clients at reasonable price.
ApplicationsRecommended for use in all new generation Diesel Engines :Specifications
| Grade Name | 15w 40 CF-4 | 15 w 40 CI-4 |
| K.V. cST 100 oC | 14-16 | 14-16 |
| V.I. Min | 120 | 125 |
| Flash Points COC, oCMin | 200 | 200 |
| Pour Point, OC Max | -27 | -24 |
| TBN mg KOH/g Typ | 8 | 13 |
We offer high-grade Industrial Gear Oil. The Industrial Gear Oil, we provide, is recommended for Hydraulic system and a wide variety of circulating systems. These Industrial Gear Oils are recommended for all heavy duty enclosed gear drives with circulation or splash lubrication system operating under heavy of shock load conditions, pain and antifriction bearing subjected to shock and heavy loads. The Industrial Gear Oil gives dependable performance for continuous service at operating temperature up to 110oC. These oils are also suitable for spray lubrication system requiring extreme pressure properties, trial and automotive equipment.
Specifications
| Grade Name Gear Oils | 68 | 100 | 150 | 220 | 320 | 460 | 680 |
| K.V. CST 40oC | 62-72 | 95-110 | 135-160 | 210-240 | 300-340 | 440-475 | 625-700 |
| V. I. Min | 90 | 90 | 90 | 90 | 90 | 90 | 90 |
| Flash Points COC, OC Min | 210 | 210 | 220 | 220 | 220 | 230 | 230 |
| Pour Point, OC Max | -6 | -6 | -6 | -6 | -6 | -3 | -3 |
We are a well-known Manufacturer & Supplier of HD EP Grade Automotive Gear Oil. The HD EP Grade Automotive Gear Oil is required at hypoid differential & drive axles and manual transmission of Automobiles. The clients can avail the HD EP Grade Automotive Gear Oil from us at reasonable price.
ApplicationsSpecifications
| Grade Name gear Oils HD EP | HD EP 80 | HD EP 90 | HD EP 140 | HD EP 80 W 90 | HD EP 85 W 140 |
| K. V. CST 100oC | 10.5-12.5 | 17-18 | 28-33 | 13.5-24.00 | 24-32 |
| V. I. Min | 90 | 90 | 90 | 90 | 85 |
| Flash Points COC, OC Min | 165 | 180 | 190 | 165 | 180 |
| Pour Point, OC Max | -24 | -9 | -3 | -21 | -21 |
Available with us is the high-grade HVI Hydraulic Anti Wear Oil that is recommended for high pressure system & power transmission system, requiring very high viscosity index, operating under high speed, load and temperatures. The clients can avail the HVI Hydraulic Anti Wear Oil from us at reasonable price.
Specifications
| Grade HVI(TH) Name | HVI 46 | HVI 68 | HVI 100 |
| K.V. CST 40oC | 42-50 | 65-70 | 100-115 |
| V. I. Min | 135 | 141 | 120 |
| Flash Points COC, OC Min | 200 | 200 | 200 |
| Pour Point, OC Max | -24 | -24 | -24 |
