Pin, Tri-Lock and Taper-lock gauges have a number of features which can be added to suit a particular application. MGM’s experienced, specialist gauge makers have considerable experience in applying these features against the customer’s component drawing requirements. Extended length gauge members. Progressive (Stepped) gauge member, Go, No Go. Progressive (Stepped) gauge member for inspecting concentricity. Hexagonal gauge members. Air Release flat on the Go member. Depth steps on the Go member Pilot Entry lead-in chamfers. Leading face on Go member relieved to clear a protrusion. Extended length handles. Handles marked with customer specific information.

  These tranducers precisely manufactured for the use in Dial type air gauges or Air electronic gauges. Two setting knobsare provided for precise control of air for setting. Tranducers without flow control valves are also available for1.50mm and 2.07mm of jets of air gauge. Free Core Probes Range ±1mm Body Ø 9.5mm Length 55mm

High Precision Custom Built Pin Sets to suit Customer specified size ranges and incremental steps for use in quality control or checking/setting measuring instruments. The number of pins in a set can range from 6 to 250.   The pins are produced to ANSI Class X (0.00125mm), lapped to 0.03m finish and supplied in a high quality wooden box or cabinet. Gauge life and dimensional stability are guaranteed based on well proven manufacturing processes and a robust quality management system.

Bright 6 digit tricolour LED display Metric / Inch relative absolute measurement Least Count 0.0001 / 0.001mm and 0.00001 / 0.0001 inch Auto calibration and auto zero Static & Dynamic (max., min., average, TIR) measurement RS-232 serial port for PC connectivity External relay output Fixture selection or model selection facility provided. 16 fixture data saved Optional — 5000 readings storage facility

Run chart for process capability USB module for easy data output Low Air pressure signal displayed on screen Instrument housed in Robust and aesthetically designed outer Case. (Anodized / Powder coated) Metric / Inch measurement Upper and Lower Limit Indicators. (In run chart and Dial) Every unit comes along with Regulator and Membrane type air dryer User friendly operation Air saving facility as a standard feature for saving costly air External relay output   Crystal clear digital display 7” LCD with capacitive screen touch Transducer and Probe not required Dial indication on touch screen System can not take wrong mastering System itself will remind for calibration after checking of 50 components Available in 1 channel and 1-2-3-4 air gauges can be connected (Only one can be used at a time) Absolute or comparative measurement Important / Volatile information is password protected

Interface with half / full bridge inductive LVDT probes Serial data communication between PC and interface with RS 232 serial PC com port or with USB port This interface box equipped with analog signal conditional and analog to digital conversion Digital measurement value tagged with individual input Liniearity 0.05% FSD Resolution 16 bit 8 digital input, 8 output for automation purpose Smart, versatile and durable for harsh environments

Bright tri colour LED bar graph with 6 digit display Metric / Inch, Absolute or relative 4 measuring ranges Single Chanel unit RS-232 serial port for PC connectivity Auto calibration and auto zero Auto calibration disable facility to avoid inadvertent changes in calibration Static & Dynamic (max., min., average, TIR, Ovality) measurement Generally accommodates all leading manufacturers jet diameters of Air Gauges User friendly operation Supplies with quick connectors to suit all leading manufacturer air gauges Air saving facility as a standard feature for saving costly air External relay output Fixture selection or model selection facility provided. 16 fixture data saved Optional — 5000 readings storage facility

Run chart for process capability USB module for easy data output Low Air pressure signal displayed on screen Instrument housed in Robust and aesthetically designed outer Case. (Anodized / Powder coated) Metric / Inch measurement Upper and Lower Limit Indicators. (In run chart and Dial) Every unit comes along with Regulator and Membrane type air dryer User friendly operation Air saving facility as a standard feature for saving costly air External relay output   Crystal clear digital display 7” LCD with capacitive screen touch Transducer and Probe not required Dial indication on touch screen System can not take wrong mastering System itself will remind for calibration after checking of 50 components Available in 1 channel and 1-2-3-4 air gauges can be connected (Only one can be used at a time) Absolute or comparative measurement Important / Volatile information is password protected

The new air saver can easily pay for itself in a short time. Measurement with air is still a very stable and accurate way to inspect parts. Instead of having the air supply on continuously, the air saver can control when and how long the air will remain on. It will automatically time out or shut off the air when the gage is not being used. You can connect this instrument to your existing air gauge unit, even dial type air gauge.

High Precision Custom Built Pin Sets to suit Customer specified size ranges and incremental steps for use in quality control or checking/setting measuring instruments. The number of pins in a set can range from 6 to 250.   The pins are produced to ANSI Class X (0.00125mm), lapped to 0.03m finish and supplied in a high quality wooden box or cabinet. Gauge life and dimensional stability are guaranteed based on well proven manufacturing processes and a robust quality management system.

Pin, Tri-Lock and Taper-lock gauges have a number of features which can be added to suit a particular application. MGM’s experienced, specialist gauge makers have considerable experience in applying these features against the customer’s component drawing requirements. Extended length gauge members. Progressive (Stepped) gauge member, Go, No Go. Progressive (Stepped) gauge member for inspecting concentricity. Hexagonal gauge members. Air Release flat on the Go member. Depth steps on the Go member Pilot Entry lead-in chamfers. Leading face on Go member relieved to clear a protrusion. Extended length handles. Handles marked with customer specific information.

We can manufacture multi gauging stations as per customers requirement for checking multiple diameter (ID/OD), with multiple iterations, taper, ovality, thickness, width, height, runout, length, flatness, squareness, CD checking, perpendicularity, PCD runout, taper cone-gauge.