Our Products
We offer superior quality Drip Irrigation System, owing to the dependency of India agriculture on water for the purpose of irrigation.
We offer superior quality drip irrigation system, owing to the dependency of India agriculture on water for the purpose of irrigation. With traditional flood irrigation farmers are able to irrigate only a part of their valuable cultivated land, therefore at this juncture our product comes to wide usage. We provide the best and controlled irrigation to the cultivated land of the farmers through the most economical way of water management.
"GANGA"&"HIPPO" brand drip irrigation system possesses the following characteristics
Main Line Submain Line Laterals Drip lines are ISI marked.
Outfitted with a state-of-the-art manufacturing unit as well as excellent quality control practices, we bring forth a huge array of Hdpe Pipes Suppliers which are designed to support many industrial usages like construction, agriculture etc. Acknowledged for their efficiency and durability, our Vertical HDPE Pipes also possess high flexible impact strength that helps them in withstanding extreme pressure and adverse climatic conditions. A substitution for conventional piping, our High-Density Polyethylene Pipes are tough and resistant to chemicals. Acclaimed among the foremost Exporters and Suppliers, our pipes are offered in different dimensions and sizes as per the specifications of our clients.
Specification
Application
Avail from us a comprehensive range of best quality UPVC Pressure Pipes which are manufactures using high grade Plastic material accompanied by advanced technological practices. Owing to our quality oriented approach, we have carved a niche among the eminent Manufacturers of PVC Pressure Pipe Fittings. Our High Pressure Pipes are distinguished for a number of characteristics such as:
Application
Scope
Outlined specification IS-4985, ISO-4422-2 and DIN-8062. This pipe is intended for use in applications where the fluid conveyed does not exceed 60°C.
PVC Materials
The material used in the manufacture of the pipe shall be domestically produced or Imported form reputed manufacturer rigid polyvinyl chloride (PVC) compound, Resin grade K-67.
Dimensions
PVC Pressure Pipes shall be manufactured in strict accordance to the requirements of IS: 4985-2000 or as per international standard for physical dimensions and tolerances. Each production run of pipe manufactured in compliance to this standard, shall also meet or exceed the test requirements for materials, workmanship, reversion, hydrostatic pressure, resistance to external blows density, sulphated ash content as defined in IS: 4985-2000 as well as in international standard.
All belled-end pipe shall have tapered sockets to create an interference-type fit, which meet or exceed the dimensional requirements and the minimum socket length for pressure-type sockets as defined in IS: 4985-2000.
Dimensions Of GANGA / HIPPO UPVC Pipes As Per IS: 4985-2000 For Use In Water Supply [All Dimensions In Mm]
Nominal Outside Diameter Nominal |
Mean Outside Diameter |
Outside Diameter At any Point |
Class I (0.25 MPA) |
Class II (0.4 MPA) |
Class III (0.6 MPA) |
Class IV (0.8 MPA) |
Class V (1.0 MPA) |
Class VI (1.25 MPA) |
||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size |
Min. |
Max. |
Min. |
Max. |
Max. |
Min. |
Max. |
Min. |
Max. |
Min. |
Max. |
Min. |
Max. |
Min. |
Max. |
Min. |
20 |
20.0 |
20.3 |
19.5 |
20.5 |
- |
- |
- |
- |
- |
- |
- |
- |
1.5 |
1.1 |
1.8 |
1.4 |
25 |
25.0 |
25.3 |
24.5 |
25.5 |
- |
- |
- |
- |
- |
- |
1.6 |
1.2 |
1.8 |
1.4 |
2.1 |
1.7 |
32 |
32.0 |
32.3 |
31.5 |
32.5 |
- |
- |
- |
- |
- |
- |
1.9 |
1.5 |
2.2 |
1.8 |
2.7 |
2.2 |
40 |
40.0 |
40.3 |
39.5 |
40.5 |
- |
- |
- |
- |
1.8 |
1.4 |
2.2 |
1.8 |
2.7 |
2.2 |
3.3 |
2.8 |
50 |
50.0 |
50.3 |
49.4 |
50.6 |
- |
- |
- |
- |
2.1 |
1.7 |
2.8 |
2.3 |
3.3 |
2.8 |
4.0 |
3.4 |
63 |
63.0 |
63.3 |
62.2 |
63.8 |
- |
- |
1.9 |
1.5 |
2.7 |
2.2 |
3.3 |
2.8 |
4.1 |
3.5 |
5.0 |
4.3 |
75 |
75.0 |
75.3 |
74.1 |
75.9 |
- |
- |
2.2 |
1.8 |
3.1 |
2.6 |
4.0 |
3.4 |
4.9 |
4.2 |
5.9 |
5.1 |
90 |
90.0 |
90.3 |
88.9 |
91.1 |
1.7 |
1.3 |
2.6 |
2.1 |
3.7 |
3.1 |
4.6 |
4.0 |
5.7 |
5.0 |
7.1 |
6.1 |
110 |
110.0 |
110.4 |
108.6 |
111.4 |
2.0 |
1.6 |
3.0 |
2.5 |
4.3 |
3.7 |
5.6 |
4.9 |
7.1 |
6.1 |
8.7 |
7.5 |
125 |
125.0 |
125.4 |
123.5 |
126.5 |
2.2 |
1.8 |
3.4 |
2.9 |
5.0 |
4.3 |
6.4 |
5.6 |
8.0 |
6.9 |
9.8 |
8.5 |
140 |
140.0 |
140.5 |
138.3 |
141.7 |
2.4 |
2.0 |
3.8 |
3.2 |
5.5 |
4.8 |
7.3 |
6.3 |
8.9 |
7.7 |
11.0 |
9.5 |
160 |
160.0 |
160.5 |
158.0 |
162.0 |
2.8 |
2.3 |
4.3 |
3.7 |
6.2 |
5.4 |
8.3 |
7.2 |
10.2 |
8.8 |
12.6 |
10.9 |
180 |
180.0 |
180.6 |
177.8 |
182.2 |
3.1 |
2.6 |
4.9 |
4.2 |
7.1 |
6.1 |
9.2 |
8.0 |
11.4 |
9.9 |
14.1 |
12.2 |
200 |
200.0 |
200.6 |
197.6 |
202.4 |
3.4 |
2.9 |
5.3 |
4.6 |
7.9 |
6.8 |
10.3 |
8.9 |
12.7 |
11.0 |
15.7 |
13.6 |
225 |
225.0 |
225.7 |
222.3 |
227.7 |
3.9 |
3.3 |
6.0 |
5.2 |
8.8 |
7.6 |
11.5 |
10.0 |
14.3 |
12.4 |
17.6 |
15.3 |
250 |
250.0 |
250.8 |
247.0 |
253.0 |
4.2 |
3.6 |
6.5 |
5.7 |
9.8 |
8.5 |
12.9 |
11.2 |
15.9 |
13.8 |
19.6 |
17.0 |
Dimensions As Per ISO 4422-2
Nom. Outside Dia. mm | Minimum Wall Thickness in mm | ||||||||
---|---|---|---|---|---|---|---|---|---|
Pressure Rating in kg/cm² | |||||||||
5 | 6 | 6.3 | 8 | 10 | 12.5 | 16 | 20 | 25 | |
20 | - | - | - | - | - | - | 1.5 | - | 2.3 |
25 | - | - | - | - | - | 1.5 | 1.9 | - | 2.8 |
32 | - | - | - | - | 1.6 | 1.9 | 2.4 | - | 3.6 |
40 | - | - | 1.5 | 1.6 | 1.9 | 2.4 | 3 | - | 4.5 |
50 | - | - | 1.6 | 2 | 2.4 | 3 | 3.7 | - | 5.6 |
63 | 1.6 | 1.9 | 2 | 2.5 | 3 | 3.8 | 4.7 | - | 7.1 |
75 | 1.9 | 2.2 | 2.3 | 2.9 | 3.6 | 4.5 | 5.6 | - | 8.4 |
90 | 2.2 | 2.7 | 2.8 | 3.5 | 4.3 | 5.4 | 6.7 | - | 10.1 |
110 | - | - | 2.7 | 3.4 | 4.2 | 5.3 | 6.6 | 8.1 | 10 |
125 | - | - | 3.1 | 3.9 | 4.8 | 6 | 7.4 | 9.2 | 11.4 |
140 | - | - | 3.5 | 4.3 | 5.4 | 6.7 | 8.3 | 10.3 | 12.7 |
160 | - | - | 4 | 4.9 | 6.2 | 7.7 | 9.5 | 11.8 | 14.7 |
180 | - | - | 4.4 | 5.5 | 6.9 | 8.6 | 10.7 | 13.3 | 16.4 |
200 | - | - | 4.9 | 6.2 | 7.7 | 9.6 | 11.9 | 14.7 | 18.2 |
225 | - | - | 5.5 | 6.9 | 8.6 | 10.8 | 13.4 | 16.6 | - |
250 | - | - | 6.2 | 7.7 | 9.6 | 11.9 | 14.8 | 18.4 | - |
280 | - | - | 6.9 | 8.6 | 10.7 | 13.4 | 16.6 | 20.6 | - |
Dimensions As Per DIN 8062
Nom. Outside Dia. mm | Pressure Rating | |||||
---|---|---|---|---|---|---|
Series 1 | Series 2 | Series 3 | Series 4 | Series 5 | Series 6 | |
SDR | ||||||
126 | 51 | 34.33 | 21 | 13.5 | 9 | |
Wall Thickness in mm | ||||||
20 | - | - | - | - | 1.5 | 2.3 |
25 | - | - | - | 1.5 | 1.9 | 2.8 |
32 | - | - | - | 1.8 | 2.4 | 3.6 |
40 | - | - | 1.8 | 1.9 | 3 | 4.5 |
50 | - | - | 1.8 | 2.4 | 3.7 | 5.6 |
63 | - | - | 1.9 | 3 | 4.7 | 7 |
75 | - | 1.8 | 2.2 | 3.6 | 5.6 | 8.4 |
90 | - | 1.8 | 2.7 | 4.3 | 6.7 | 10 |
110 | 1.8 | 2.2 | 3.2 | 5.3 | 8.2 | 12.3 |
125 | 1.8 | 2.5 | 3.7 | 6 | 9.3 | 13.9 |
140 | 1.8 | 2.8 | 4.1 | 6.7 | 10.4 | 15.6 |
160 | 1.8 | 3.2 | 4.7 | 7.7 | 11.9 | 17.8 |
180 | 1.8 | 3.6 | 5.3 | 8.6 | 13.4 | 20 |
200 | 1.8 | 4 | 5.9 | 9.3 | 14.9 | 22.3 |
225 | 1.8 | 4.5 | 6.6 | 10.4 | 16.7 | 25 |
250 | 2 | 4.9 | 7.3 | 11.9 | 18.6 | 27.8 |
280 | 2.3 | 5.5 | 8.2 | 13.4 | 20.8 | - |
We are reckoned as one of the preeminent Manufacturers and Suppliers of Ppr Pipes. Our durable range of PPR Plastic Pipes finds usage in diverse applications in farming, agriculture, irrigation and other industrial sectors for connecting with pipelines. Our Antibacterial PPR Pipes maintains hygiene by minimizing bacterial growth. Moreover, our pipes are appreciated for their energy conservation and heat preservation characteristics. Besides offering easy installation, the smooth interior surface of our pipes allows easy flow of water and prevents blockages.
Application
Scope
Outlined specification DIN 8077/78. This pipe is intended for use in applications where the fluid conveyed does not exceed 95oC.
PP-R Materials
The material used in the manufacture of the pipe shall be domestically produced or imported from reputed manufacturer Polypropylene co-polymer compound with other additives.
Dimensions
PP-R Pipes shall be manufactured in strict accordance to the requirements of DIN : 8077/78 for physical dimensions and tolerances. Each production run of pipe manufactured in compliance to this standard, shall also meet or exceed the test requirements for materials, workmanship, creep strength, impact strength, heat reversion, density, melt flow index etc.
Guidelines For Welding PP-R Pipes And Fittings With Suitable Operating Pressure
Outside diameter for pipe (mm) |
Heating up (Second) |
Processing (Second) |
Cooling Period (Minute) |
Depth of welding (mm) |
---|---|---|---|---|
20 |
5 |
4 |
2 |
14 |
25 |
7 |
4 |
2 |
15 |
32 |
8 |
6 |
4 |
16 |
40 |
12 |
6 |
4 |
18 |
50 |
18 |
6 |
4 |
20 |
63 |
24 |
8 |
6 |
24 |
Polyfusion welding:
Step 1: Cut the pipe upright to the axis of the pipe.
Step 2: Clean the die durface properly and ensure Machine temperature has reached to 260° C.
Step 3: Insert pipe and fitting into respective die and allow to heat as per table given above.
Step 4: Remove the pipe and fittings from the dies and immediately push the pipe into the socket and allow it to cool as per table given
Recommended application : Cold water installation
Recommended application : Hot water installation
Recommended application : Central heating installation
Suitable Operating Pressure
Temperature °C |
Service life in years |
Nominal Pressure* |
||
---|---|---|---|---|
PN 10 |
PN 16 |
PN 20 |
||
10° C |
1 |
17.6 |
28.2 |
35.2 |
5 |
16.5 |
26.5 |
33.1 |
|
10 |
16.1 |
25.8 |
32.3 |
|
25 |
15.6 |
25.0 |
31.2 |
|
50 |
15.5 |
24.3 |
30.4 |
|
100 |
14.8 |
23.7 |
29.6 |
|
20° C |
1 |
14.9 |
23.9 |
29.9 |
5 |
14.1 |
22.6 |
28.3 |
|
10 |
13.7 |
22.0 |
27.5 |
|
25 |
13.3 |
21.3 |
26.7 |
|
50 |
12.9 |
20.7 |
25.9 |
|
100 |
12.5 |
19.5 |
25.1 |
|
30° C |
1 |
12.8 |
20.5 |
25.6 |
5 |
12.0 |
19.2 |
24.0 |
|
10 |
11.6 |
18.6 |
23.2 |
|
25 |
11.2 |
17.9 |
22.4 |
|
50 |
10.9 |
17.5 |
21.9 |
|
40° C |
1 |
10.8 |
17.3 |
21.6 |
5 |
10.1 |
16.2 |
20.3 |
|
10 |
9.9 |
15.8 |
19.7 |
|
25 |
9.5 |
15.2 |
18.9 |
|
50 |
9.2 |
14.7 |
18.4 |
|
50° C |
1 |
9.1 |
14.6 |
18.3 |
5 |
8.5 |
13.7 |
17.1 |
|
10 |
8.3 |
13.2 |
16.5 |
|
25 |
8.0 |
12.8 |
16.0 |
|
50 |
7.7 |
12.4 |
15.5 |
|
60° C |
1 |
7.7 |
12.4 |
15.5 |
5 |
7.2 |
11.5 |
14.4 |
|
10 |
6.9 |
11.1 |
13.9 |
|
25 |
6.7 |
10.7 |
13.3 |
|
50 |
6.5 |
10.4 |
12.9 |
|
70° C |
1 |
6.5 |
10.5 |
13.1 |
5 |
6.0 |
9.6 |
12.0 |
|
10 |
5.8 |
9.3 |
11.6 |
|
25 |
4.9 |
7.9 |
9.9 |
|
50 |
4.3 |
6.8 |
8.5 |
|
80° C |
1 |
5.5 |
8.8 |
10.9 |
5 |
4.8 |
7.7 |
9.6 |
|
10 |
4.0 |
6.4 |
8.0 |
|
25 |
3.2 |
5.1 |
6.4 |
|
95° C |
1 |
3.9 |
6.2 |
7.7 |
5 |
2.6 |
4.1 |
5.2 |
|
10 |
2.2 |
3.5 |
4.3 |
Dimensions Of GANGA / HIPPO PP-R Pipes AS PER DIN 8077 / 8078 [All Dimensions In Mm]
Sr. No. |
Outside diameter of pipe (in mm) |
Wall thickness of pipe (In millimeters) |
|||||
---|---|---|---|---|---|---|---|
SDR 11 (PN-10) |
SDR 7.4 (PN-16) |
SDR 6 (PN-20) |
|||||
Min. |
Max. |
Min. |
Max. |
Min. |
Max. |
||
01 |
20 + 0.3 |
1.9 |
2.3 |
2.8 |
3.3 |
3.4 |
4.0 |
02 |
25 + 0.3 |
2.3 |
2.8 |
3.5 |
4.1 |
4.2 |
4.9 |
03 |
32 + 0.3 |
3.0 |
3.5 |
4.5 |
5.2 |
5.4 |
6.2 |
04 |
40 + 0.4 |
3.7 |
4.3 |
5.6 |
6.4 |
6.7 |
7.6 |
05 |
50 + 0.5 |
4.6 |
5.3 |
6.9 |
7.8 |
8.4 |
9.5 |
06 |
63 + 0.6 |
5.8 |
6.6 |
8.7 |
9.8 |
10.5 |
11.8 |
Through our innovative approach, we successfully meet the growing market demands by offering an extensive array of durable UPVC Casing Pipes that are used for various underground applications. Developed using qualitative PVC compound, our leak proof Borewell Casing Pipes are known for their easy installation and anti-corrosiveness. Offering precise dimensional tolerance, our casing pipes provide low friction and high flow characteristics. Being one of the leading Plastic Casing Pipes Exporters and Suppliers, we deliver these pipes in different sizes and dimensions in accordance with the standard norms as well as customized requirements of our clients.
Application
Scope
Outlined specification IS, DIN. This pipe is intended for use in applications where the fluid conveyed does not exceed 60oC.
PVC Materials
The material used in the manufacture of the pipe shall be domestically or imported from reputed manufacturer produced rigid polyvinyl chloride (PVC) compound, PVC Resin grade K-6701.
Dimensions
UPVC Casing Pipes shall be manufactured in strict accordance to the requirements of IS: 12818-1992 or as per International standard for physical dimensions and tolerances. Each production run of pipe manufactured in compliance to this standard, shall also meet or exceed the test requirements for materials, workmanship, impact strength, specific gravity, tensile strength, vicat softening temperature test content as defined in IS: 12818-1992. Pipes thread and slot sizes which meet the dimensional requirements as defined in IS: 12818-1992 or as per international standard.
Dimensions Of UPVC Casing Pipe – CS As Per IS: 12818 – 2010 (Suitable For Wells Depth Up To 80 Meters)
Size in Inch | Nominal diameter (DN) | Outer diameter of Pipe (mm) | Thickness of Pipe (mm) | Outer dia over connection | Segmental Length (mm) | Pipe length with socket (mm) |
---|---|---|---|---|---|---|
4"* | 100 | 113.0 - 113.2 | 4.0 – 4.4 | 117 | 45 | 3.06 |
4.5"* | 115 | 125.0 - 125.4 | - | - | - | 3.07 |
5"* | 125 | 140.0 - 140.4 | 4.9 – 5.4 | 148 | 60 | 3.08 |
6" | 150 | 165.0 - 165.4 | 5.7 – 6.5 | 173 | 60 | 3.08 |
6.5"* | 165 | 180.0 - 180.5 | 5.7 – 6.5 | 189 | 60 | 3.08 |
7" | 175 | 200.0 - 200.5 | 7.0 – 7.8 | 212 | 60 | 3.09 |
8" | 200 | 225.0 - 225.5 | 7.6 – 8.8 | 238 | 70 | 3.1 |
9"* | 225 | 250.0 - 250.5 | 8.6 – 9.8 | - | - | 3.11 |
10" | 250 | 280.0 - 280.5 | 9.6 – 11.0 | 292 | 85 | 3.11 |
Dimensions Of UPVC Casing Pipe – CM As Per IS: 12818 – 2010 (Suitable For Wells Depth Up To 250 Meters)
Size in Inch | Nominal diameter (DN) | Outer diameter of Pipe (mm) | Thickness of Pipe (mm) | Outer dia over connection | Segmental Length (mm) | Pipe length with socket (mm) |
---|---|---|---|---|---|---|
1" | 35 | 42.0 – 42.2 | 3.5 – 4.0 | 46 | 25 | 3.04 |
1.5" | 40 | 48.0 – 48.2 | 3.5 – 4.0 | 52 | 25 | 3.04 |
2" | 50 | 60.0 - 60.2 | 4.0 – 4.6 | 64 | 30 | 3.05 |
3" | 80 | 88.0 - 88.2 | 4.0 – 4.6 | 94 | 40 | 3.06 |
4" | 100 | 113.0 - 113.2 | 5.0 - 5.7 | 120 | 45 | 3.06 |
4.5" * | 115 | 125.0 - 125.4 | 5.0 - 5.7 | 132 | 50 | 3.07 |
5" | 125 | 140.0 - 140.4 | 6.5 - 7.3 | 150 | 60 | 3.08 |
6" | 150 | 165.0 - 165.4 | 7.5 - 8.5 | 177 | 60 | 3.08 |
6.5"* | 165 | 180.0 - 180.5 | 7.5 - 8.5 | 193 | 60 | 3.08 |
7" | 175 | 200.0 - 200.5 | 8.8 - 9.8 | 215 | 60 | 3.09 |
8" | 200 | 225.0 - 225.5 | 10.0 - 11.2 | 243 | 70 | 3.1 |
9"* | 225 | 250.0 - 250.5 | 11.8 - 12.9 | - | - | 3.11 |
10" | 250 | 280.0 - 280.5 | 12.5 - 14.0 | 298 | 85 | 3.11 |
Specification For Deep Well Plain Casing Pipe Conforming As Per DIN 4925
Nominal Dia. |
Outside Dia. mm |
Wall Thickness mm |
Max. Outside Dia. Over Socket mm |
Collapse Resistance kg/cm² |
|||
---|---|---|---|---|---|---|---|
Inch |
mm |
Min. |
Max. |
Min. |
Max. |
||
4" |
100 |
113.0 |
113.3 |
7.0 |
7.9 |
125 |
15.5 |
4.5" |
115 |
125.0 |
125.3 |
7.5 |
8.5 |
137 |
15.5 |
5" |
125 |
140.0 |
140.4 |
8.0 |
9.0 |
152 |
15.5 |
6" |
150 |
165.0 |
164.5 |
9.5 |
10.7 |
180 |
15.5 |
7" |
175 |
200.0 |
200.5 |
11.5 |
13.3 |
215 |
7.5 |
8" |
200 |
225.0 |
225.5 |
13.0 |
14.8 |
247 |
15.5 |
10" |
250 |
280.0 |
280.5 |
16.0 |
17.6 |
304 |
15.5 |
Specification For Medium Well Plain Casing Pipe Conforming As Per DIN 4925
Nominal Dia. |
Outside Dia. mm |
Wall Thickness mm |
Max. Outside Dia. Over Socket mm |
Collapse Resistance kg/cm² |
|||
---|---|---|---|---|---|---|---|
Inch |
mm |
Min. |
Max. |
Min. |
Max. |
||
1.5" |
40 |
48.0 |
48.2 |
3.5 |
4.1 |
53 |
32.0 |
2" |
50 |
60.0 |
60.2 |
4.0 |
4.6 |
66 |
24.0 |
3" |
80 |
88.0 |
88.3 |
4.0 |
4.6 |
94 |
7.5 |
4" |
100 |
113.0 |
113.3 |
5.0 |
5.7 |
121 |
7.5 |
4.5" |
115 |
125.0 |
125.3 |
5.0 |
5.7 |
132 |
7.5 |
5" |
125 |
140.0 |
140.4 |
6.5 |
7.4 |
149 |
7.5 |
6" |
150 |
165.0 |
165.4 |
7.5 |
8.5 |
176 |
7.5 |
7" |
175 |
200.0 |
200.5 |
8.8 |
9.8 |
215 |
7.5 |
8" |
200 |
225.0 |
225.5 |
10.0 |
11.2 |
241 |
7.0 |
10" |
250 |
280.0 |
280.5 |
12.5 |
14.0 |
297 |
7.0 |
Details
Slot Width |
Min. mm |
0.2 |
0.3 |
0.5 |
0.75 |
1.0 |
1.5 |
2.0 |
3.0 |
---|---|---|---|---|---|---|---|---|---|
Tolerance |
|
+.06 |
+.08 |
+0.1 |
+0.2 |
+0.2 |
+0.2 |
+0.2 |
+0.3 |
Slot Width |
* Inch no. |
8 |
12 |
20 |
30 |
40 |
60 |
80 |
120 |
* Slot numbers designate width of openings in thousand part of an inch. no. 40 is an opening of 40/100".
Note : Tolerance for 0.3 mm slot is +0.06 mm conforming to IS:12818. Other values are same.
With our technical expertise in offering excellent quality Pex Pipes Manufacturers, we have become one of the prominent Manufacturers in our domain. Fabricated with high grade raw materials by utilizing modern technology, our PEX Water Pipes are available to us at economical prices in different sizes, dimensions and breadths as per the technical requisites of our clients. Consequently, we are one of the well-known Exporters based in India. Our long lasting PEX Plumbing Pipe offers smooth and efficient flow characteristics owing to its perfect finishing. Since these pipes are light in weight, thy can be easily carried, transported and installed at the desired destination. Moreover, these pipes are recognized for their excellent resistance to corrosion and chemicals.
Application
Scope
Outlined specification ASTM 2447 (Dimensions only). This pipe is intended for use in applications where the fluid conveyed does not exceed 90oC.
PE Materials
The material used in the manufacture of the pipe shall be domestically produced as well as imported form reputed manufacturerâs High Density Polyethylene with cross link agent (catalyst) and UV Stabilizer.
Dimensions
PEX Pipes shall be manufactured in strict accordance to the requirements of ASTM D 2447 (Dimensions only) for physical dimensions and tolerances. Fitment (Threaded) as per BSPT Standard. Each production run of pipe manufactured in compliance to this standard, shall also meet or exceed the test requirements for materials, workmanship, hydrostatic pressure, density, temperature test, tensile strength etc.
Unique Features
Application
Scope
Outlined specification ASTM 2447 (Dimensions only). This pipe is intended for use in applications where the fluid conveyed does not exceed 90oC.
PE Materials
The material used in the manufacture of the pipe shall be domestically produced High Density Polyethylene with cross link agent (catalyst) and UV Stabilizer.
Dimensions
PEX Pipes shall be manufactured in strict accordance to the requirements of ASTM D 2447 (Dimensions only) for physical dimensions and tolerances. Fitment (Threaded) as per BSP STD. Each production run of pipe manufactured in compliance to this standard, shall also meet or exceed the test requirements for materials, workmanship, hydrostatic pressure, density, temperature test, tensile strength etc.
Dimensions Of GANGA PEX Pipes As Per ASTM D 2447
Nominal Diameter (Inch) |
Outer diameter (In mm) |
Thickness of Pipe (mm) |
Sustained Pressure Kgf/cm2 at 23oC (73oF) |
Sustained Pressure Kgf/cm2 at 90oC (194oF) |
|
---|---|---|---|---|---|
|
|
Min. |
Max. |
|
|
1/2" |
21.34 |
3.73 |
3.99 |
27.42 |
6.03 |
3/4" |
26.67 |
3.99 |
4.25 |
22.50 |
4.95 |
1" |
33.40 |
4.55 |
4.82 |
21.09 |
4.64 |
1 1/4" |
42.16 |
4.85 |
5.13 |
16.87 |
3.71 |
1 1/2" |
48.26 |
5.08 |
5.39 |
15.47 |
3.40 |
2" |
60.32 |
5.54 |
5.87 |
12.67 |
2.79 |
We are ardently engaged in offering a versatile range of PEX Fittings which are used for connecting tubes in numerous domestic, commercial as well as industrial applications like plumbing, heating, air pressure etc. We have the facility of custom fabricating our cross linked Polyethylene PEX Pipe Fittings like Elbow, Reducer, Red Tee and Union in different sizes, diameters and dimensions as per the specific requirements of our clients. Owing to this customer oriented approach, we have made our mark among the reckoned PEX Tube Fittings, IPS threaded pipe fittings, threaded plumbing system, IPS threaded systems Manufacturers based in India. Rendering trouble free operation, our high quality PEX Plumbing Fittings are demanded globally due to their excellent features of corrosion resistance and precise dimensional tolerance.
Application
Scope
Outlined specification ASTM 2447 (Dimensions only). This Fitting is intended for use in applications where the fluid conveyed does not exceed 90oC.
PE Materials
The material used in the manufacture of the Fittings shall be domestically produced or imported form reputed manufacturerâs High Density Polyethylene with cross link agent (catalyst) and UV Stabilizer.
Dimensions
PEX Fittings shall be manufactured in strict accordance to the requirements of ASTM D 2447 (Dimensions only) for physical dimensions and tolerances. Fitment (Threaded) as per BSPT standard. Each production run of fitting manufactured in compliance to this standard, shall also meet or exceed the test requirements for materials, workmanship, hydrostatic pressure, density, temperature test, tensile strength etc.
Unique Features
Diemnsion Of Ganga PE-X Fitting
Sr. No |
Item |
Wall Thickness (t1) |
Wall Thickness (t2) |
Socket Length (I1) |
Socket Length (I2) |
---|---|---|---|---|---|
1 |
Elbow 1/2" |
4.10 |
|
17.30 |
|
2 |
Elbow 3/4" |
4.25 |
|
17.50 |
|
3 |
Elbow 1" |
4.85 |
|
20.00 |
|
4 |
Elbow 1-1/4" |
5.50 |
- |
20.50 |
- |
5 |
Red. Elbow 1"x1/2" |
5.10 |
4.10 |
19.70 |
14.20 |
6 |
Red. Elbow 1” x 3/4" |
5.10 |
4.70 |
19.70 |
17.30 |
7 |
Red. Elbow 3/4"x1/2" |
3.45 |
4.10 |
17.30 |
14.20 |
8 |
Tee 1/2" |
4.10 |
|
17.30 |
17.30 |
9 |
Tee 3/4" |
4.25 |
|
17.50 |
17.50 |
10 |
Tee 1" |
5.10 |
|
20.00 |
20.00 |
11 |
Tee 1-1/4”" |
5.50 |
- |
20.50 |
20.50 |
12 |
Red. Tee 1" x 1/2" |
5.10 |
4.10 |
20.00 |
17.00 |
13 |
Red. Tee 1" x 3/4" |
5.10 |
4.25 |
20.00 |
17.50 |
14 |
Red. Tee 3/4" x 1/2" |
4.25 |
4.10 |
17.50 |
17.30 |
15 |
Socket 1/2" |
4.10 |
|
17.30 |
|
16 |
Socket 3/4" |
4.25 |
|
17.50 |
|
17 |
Socket 1" |
5.00 |
|
20.00 |
|
18 |
Socket 1-1/4” |
5.50 |
- |
20.50 |
- |
19 |
Reducer 1-1/4" x 1” |
5.50 |
5.00 |
20.50 |
20.00 |
20 |
Reducer 1" x 1/2" |
5.00 |
4.10 |
20.00 |
17.30 |
21 |
Reducer 1" x 3/4" |
5.00 |
4.25 |
17.50 |
17.50 |
22 |
Reducer 3/4" x 1/2" |
4.25 |
4.10 |
17.30 |
17.30 |
23 |
Union 3/4" |
4.50 |
|
20.00 |
|
24 |
Union 1" |
5.00 |
|
19.00 |
|
25 |
Brass Elbow (F) 1/2" |
4.10 |
4.50 |
19.00 |
14.50 |
26 |
Brass Elbow (F) 3/4" |
4.25 |
5.00 |
21.00 |
14.70 |
27 |
Brass Elbow (F) 1" |
5.10 |
5.40 |
21.00 |
17.10 |
29 |
Brass Red. Elbow (F) 1" x 1/2" |
5.10 |
4.80 |
21.00 |
14.50 |
30 |
Brass Red. Elbow (F) 1" x 3/4"" |
5.10 |
4.25 |
19.00 |
14.70 |
31 |
Brass Red. Elbow (F) 3/4" x 1/2" |
4.25 |
7.80 |
19.00 |
14.50 |
32 |
Brass Tee (F) 1/2" |
4.10 |
6.30 |
17.20 |
14.70 |
33 |
Brass Tee (F) 3/4" |
4.50 |
6.80 |
18.90 |
17.10 |
34 |
Brass Tee (F) 1" |
5.10 |
6.10 |
20.20 |
14.50 |
35 |
Brass Red. Tee (F) 1" x 1/2" |
5.10 |
6.80 |
20.20 |
14.70 |
36 |
Brass Red. Tee (F) 1" x 3/4" |
5.10 |
6.80 |
18.90 |
14.50 |
37 |
Brass Red. Tee (F) 3/4" x 1/2" |
4.50 |
6.80 |
19.10 |
14.50 |
38 |
Brass FTA 1/2" x 1/2" |
4.10 |
4.50 |
18.90 |
19.30 |
39 |
Brass MTA 1/2" x 1/2" |
4.10 |
4.80 |
19.00 |
14.70 |
40 |
1/2" End Cap |
3.40 |
|
16.80 |
|
41 |
3/4" End Cap |
4.25 |
|
17.50 |
|
42 |
1" End Cap |
5.00 |
|
20.50 |
|
43 |
Long Plug 1/2" |
3.40 |
|
16.40 |
|
44 |
Cross Tee 1/2" |
4.10 |
|
17.30 |
|
45 |
Ball Valve Plastic Threaded 1/2" |
5.30 |
|
16.50 |
|
46 |
Ball Valve Brass Threaded 1/2" |
4.50 |
|
12.25 |
|
We offer superior Sprinkler Irrigation System that is designed considering the crops grown, availability of water and its composition, type of soil.
We offer superior Sprinkler Irrigation System that is designed considering the crops grown, availability of water and its composition, type of soil, elevation, temperature, humidity and wind velocity in order to get the best possible results. Our Sprinklers Irrigation System is capable of irrigating a much larger area as compared to the traditional flood irrigation system. The system is effectively used on almost all the crops grown in country like wheat, gram, soyabean, vegetables, cotton, sugarcane, flowers, groundnut, mustard, etc.