Other Products / Services #1709543

Aluminium Staff Level Rods ArrowsAutomatic Gauge RecorderAutomatic Water Level Stage RecorderAutomatic LevelChart For Automatic Gauge RecrderDirect Velocity RecorderDischarge RodElectronic TheodoliteElectronic Water Level IndicatorGauging ReelHook GaugeLife Jacket

Product data sheethourclock automatically radio-controlled by the frankfurt antenna (dcf-77)manual setting functiondisplay 12 or 24 hourstime zone : +- 12 hourscalendar with day date month displayindoor temperaturemeasure units: c or frange: from 9.9 c to + 59.9 cresolution : 0.1 crecording of min max with time and date of readingsreading every 15 secondsindoor humiditymeasure unit : % rhswiss high definition sensorrange : from 1 % to 99 %resolution : 1%accuracy : +- 3 %recording of min max of time and date of readingsreading every 30 secondsforecastbarometer with icon displaytrend display atmospheric pressuremeasure units : hpa or inhgrange for absolute pressure : from 300 hpa to 1099 hpachoice of user display of relative pression (from 920 hpa to 1080 hpa)pressure sensitivity level settingrecording of min max with time and date of readingsoutdoor temperaturemeasure units : c or frange : from 29.9 c to + 69.9 cresolution : 0.1 crecording of min max with time and date of readingsoutdoor humiditymeasure unit : % rhswiss high definition sensorrange : from 1 % to 99 %resolution : 1%accuracy : +- 3 %recording of min max with time and date of readingsdew pointdew point displayrecording of min max with time and date of readingswind speed & wind directionmeasure units : kmh, ms, knots, mph or beaufortrange : from 0 to 180 kmh (or from 1 to 49.9 ms)wind direction displayed on a 360 compassrecording of min max with time and date of recordingswindchillwindchill displayrecording of min max with time and date of readingsrainchoice of precipitation display: over 1 hour, over 24 hours, or the totalvolumemeasure units : mm or inchrange : from 0 to 999.9 mm (over 1 or 24 hours)and from 0 to 2499 mm (on the total rain volume)resolution : 0.5 mmrainfall per impuls : 0.518 mmrecording of min max with time and date of readingsalarms21 alarm setting (high and lows) :hour alarmstorm alarm (sound alarm possible)indoor temperature alarm (high and low)outdoor temperature alarm (high and low)indoor humidity alarm (high and low)outdoor humidity alarm (high and low)wind chill alarm (high and low)dew point alarm (high and low)precipitation alarm over 24 hours and over 1 hourrelative pressure alarm (high and low)wind speed alarm (high and low)wind direction alarm pc connectioncomputer connection includeddelivered with setup cd-rom (in french, english and german) and 2 metres of cable for the base-computer linkdata is gathered by the computer, from which it is possible to use the data and design graphspossible storage of 175 sets of dataminimum system requirement for use of this heavy weather software is :operating system : windows 98 or aboveprocessor : pentium 166 mhz or aboveram : 32 mb of ram or abovehard-disk : 20 mb free spacecd rom drivefrequenciesif the transmission is at 433 mhz, the recording is every 32 seconds (if the wind is morethan 10 ms) or every 128 seconds (if the wind is less than 10 ms) or 10 minutes if thestation fails to receive any data after 5 attempts in a row (all outdoor data readings willdisplay --- except for the rain value)if the transmission is by cable, then the recording is every 8 secondstransmissiondata transmitted at 433 mhz or by cable link with basetransmission at 433 mhz : 100 metres (in open field)transmission distance by cable : 10 metres(with the possibility of an extra 10 metre maximum cable)lcd contrastlcd contrast variable from +1 to +8delivered withbase receiver stationthree outdoor sensors : thermohygro transmitter, wind sensor, rain sensoroptional wired connection for data transfer to base receiver stationwireless weather station software in cd rom format for transfer of data to pc (available onwww.heavyweather.info)pc rs 232 serial port cableacdc power adaptermeasurementof the station ( l x w x h) = 170 x 35 x 138 mmof the thermohygro transmitter ( l x w x h) = 71.5 x 73 x 130 mmof the rain meter ( l x w x h) = 140 x 70 x 137 mmof the anemometer ( l x w x h) = 60 x 197 x 291 mmwall mounted or free standingbattery3 x aa batteries, iec lr6 1, 5 v for the receptor2 x aa batteries, iec lr6 1, 5 v for the thermohygro transmitter.

We are offering soil testing kit.testing proceduressoil testing kittestingsoil sample collection and preparation:depending on the type of soil, divide the field in different sampling units. The soil sample collected should be representative of the area sampled. a good representative soil sample is the first requirement for a reliable soil testing. A field can be treated as a single sampling unit only if it is appreciably uniform in all respects. Separate sets of composit samples need to be taken for separate type areas. The sample should be taken in zigzag pattern. For field crops, sampling depth of 15-20 cms is desired. For pasture crop, a 10 cm. Depth is normally sufficient. Sampling tools : for sampling soft moist soil, spade or khurpi is quite satisfactory. for harddry soil, screw type auger is more convenient. sample collection:if the spade or khurpi is used, a v shaped cut may be first made up to plough layer and uniform 1.5 cm slice taken out. The collected soil sample should be thoroughly mixed on a clear piece of cloth, polythene sheet or thick paper and the bulk reduced by "quartering" so that about 500 gm. (12 kg.) of composite sample is retained. In 'quartering', the soil is spread uniformally over a sheet of brown paper or polythene and divided in to four equal square portions. Discard the two diagonally opposite squares while retaining the other two squares. Mix the retained soil sample and repeat the process of discarding until about 12 kg. Sample is balance. sample storage:the sample must be kept in cloth or polythene bag with suitable identification. sample preparation:it is preferable to air dry samples in shade. The samples may be mixed during drying to expose fresh surfaces. The dried samples are crushed gently using pestle & morter and sieved through 2 mm sieve. Pestle & morter may be of wood, porelaim or stainless steel. Sieve can be steel or nylon. Stones, pieces of roots or leaves etc. may be removed from the sample. The soil sample passed through 2 mm sieve may be used for analysis of n, p, k & ph. For analysis of organic carbon, small portion of soil sample is further ground, using pestle & morter, to make it a powder to pass through 0.5 mm sieve. ph colour comparator soil ph test contains a colour comparator, which has 10 slots ranging from ph value of 4.5 (highly acidic) to 9.0 (highly alkaline). phosphorous & nitrogen colour comparatorthe phosphorous & nitrogen test contains a colour comparator, which has 5 nos. Colour slots of blue red colour of varying intensity corresponding to the phosphorous nitrogen content in the soil sample. organic carbon colour comparatorthe organic carbon test contains colour comparator which has 6 nos. Colour slots ranging from 0 to 1.0 % organic carbon in soil sample. matching the colourfor matching the colour of test water with the colours on the comparator, place the glass test bottle in the comparator. Hold the comparator against light, placing it between source of daylight and the observer, at his eye level. Observe the colour of test water. Match the colour of test bottle with colours on comp rator. read the phosphorousnitrogenorganic carbon content directly on the comparator. in case colour of test water falls between two colour slots on comparator, reading may be taken as the mid-point between the two colour slots. proper handling of chemicals1. Carefully follow all instructions. 2. Some of the reagents contain strong acids. Handle these carefully. 3. Tighten all caps immediately after use. Do not exchange caps. 4. Avoid prolonged exposure to direct sunlight. 5. Keep reagents away from fire and heat. 6. Wash & rinse all apparatus immediately after use. Use bottle brush for cleaning of bottles, wherever necessary. 7. Keep away from reach of children. soil - ph testtest procedure1. Take reagent ph-1 in test bottle no. 1 up to 5 ml. Mark. 2. Add 2 flat spoonful of soil (2gm.) in test bottle no. 1 with the help of funnel. 3. Put cap and mix by gentle inversion for one minute. (do not shake vigorously. Mix for one minute only) allow the bottle to stand for 10 minutes. Soil will settle & separate to leave clear liquid layer on the top. 4. Place the bottle no. 1 in ph colour comparator and match the colour of top liquid layer with colours on the comparator. Read soil ph directly on comparator (refer note for method of colour matching). (for ease of matching colours, you may carefully decant the upper clear liquid from test bottle no. 1 to another clean test bottle no. 1 and then match the colour with ph colour chart.) available phosphorous (p) in soiltest procedure1. Take in test bottle no. 1, phosphorous reagent ap-1 up to 6 ml. Mark. 2. Using funnel, add one flat spoonful (1gm.) of soil in test bottle no. 13. Put cap and mix by gentle inversion for one minute. (do not shake vigorously. Mix for one minute only) allow the bottle to stand for 5 minutes. Soil will settle & separate to leave clear liquid layer on the top. 4. Carefully draw upper clear liquid in dropper and transfer the same to test bottle no. 2 to make level up to 3 ml. Mark. (do not pull up any soil in the dropper. To avoid agitation of soil, squeeze bulb of dropper before inserting its tip into liquid. Release bulb slowly to draw clear liquid.)5. To 3ml. Liquid in bottle no. 2, add 6 drops of phosphorous reagent ap-2 and mix gently by swirling. Add 3 drops of reagent ap-3. Put cap and mix well. Blue colour will develop in bottle no. 2. 6. Place the bottle in phosphorous colour comparator & match the colour of bottle with the colours on phosphorous colour comparator. (refer the note regarding colour comparator)read the available phosphorous (as p) directly on the colour comparator. available nitrogen (n) in soiltest procedure1. Take in test bottle no. 1, nitrogen reagent an-1 up to 6 ml. Mark. 2. Using funnel, add one flat spoonful of soil (1gm.) in test bottle no. 13. Put cap and mix by gentle inversion for one minute. (do not shake vigorously. Mix for one minute only) allow the bottle to stand for 5 minutes. Soil will settle & separate to leave clear liquid layer on the top4. In clean bottle no. 2, carefully transfer 2 ml of upper clear liquid from bootle no. 1, using dropper. (carefully draw liquid from bottle no. 1 in dropper. Do not pull up any soil in the dropper, while drawing liquid. To avoid agitation of soil, squeeze bulb of dropper before inserting tip into liquid. Release bulb slowly to draw clear liquid.)5. To test bottle no. 2, add 4 drops of reagent an-2. & mix gently. 6. To test bootle no. 2, add 4 drops of reagent an-3, put cap & mix gently. Wait for 5 minutes. 7. After 5 minutes, mix gently & place the bottle in nitrogen colour comparator & match the colour of bottle with colours on comparator.(refer note regarding colour comparator.)8. Read the available nitrogen directly on comparator. organic carbon in soiltest procedure1. Using 100mg. Spoon, take one spoonful (100mg.) of finely ground soil in test bottle no. 1. 2. to the bottle no. 1, add 0.5 ml. Of reagent oc-1 with the help of 1 ml.green coloured syringe (do not use red coloured syringe)3. To the bottle no. 1, add 80 drops of reagent) oc-2 and mix by gentle swirling. (caution! reagent oc-2 is a strong acid. Handle carefully avoids contact.) put cap. Wait for 30 minutes. 4. add reagent oc-3 to make the level in bottle no. 1 up to 5 ml. Mark. Mix by gentle swirling. Allow the bottle to stand for 5 minutes. Soil will settle & separate to leave clear liquid layer on the top. 5. place the bottle in organic colour comparator and match the colour of top liquid layer with the colour slots on comparator by holding the comparator against day light. (please refer note regarding organic carbon colour comparator)6. read the percentage organic - carbon in the soil (%) directly on the colour comparator. (for ease of matching colours, you may carefully decant the upper clear liquid from test bottle no. 1 to another clean test bottle no. 1 and then match the colour with colour comparator.) available potassium (k) in soiltest procedure1. Take in test bottle no. 1, potassium reagent ak-1 up to 6 ml. Mark. 2. Using funnel, add two flat spoonfuls (2gm.) of soil in test bottle no. 13. put cap and mix by gentle inversion for one minute. (do not shake vigorously. mix for one minute only) allow the bottle to stand for 5 minutes. Soil will settle & separate to leave clear liquid layer on the top. 4. Carefully draw upper liquid in dropper and transfer the same to another clean bottle no.2, to make level up to 2 ml. Mark. (do not pull up any soil in dropper. To avoid agitation of soil, squeeze bulb of dropper before inserting its tip in to liquid. Release bulb slowly to draw clear liquid in to the dropper.)5. To 2 ml. Liquid in bottle no. 2, add one tablet of potassium reagent ak-2. Do not put cap. Mix by swirling. Allow tablet to dissolve completely. Mix by swirling intermittently to assist dissolution (it may take 5-6 minutes to dissolve the tablet completely) purple colour will develop in bottle no. 2. Proceed further only after complete dissolution of tablet. 6. Take potassium reagent ak-4 in the 1 ml syringe. Add reagent ak-4 to bottle no. 2, two drops at a time, and mix gently after each addition. Keep count of drops and continue addition until colour changes from purple to blue. Count the no. Of drops of reagent ak-4 required for colour change. use red coloured 1 ml. Syringe for taking potassium. Reagent ak-4. (do not use green coloured syringe)

We are offering ni 40 vibrometermeasuring vibration acceleration and velocitytrue rms measurementsealed membrane key padsuitable for monitoring machinery vibration caused by imbalance, misalignment and gear faultsmicro controller based back light displayauto offbattery low indication with text technical datavelocity measuring range: 0.1 - 200 mm/s true rms & peakacceleration measuring range: 0.1 - 200 m/s2 peak, true rmsresolution: 0.1mm/saccuracy: (2% + 0.1mm/s)frequency response : 10 - 1khz (60 to 60000) cpmpower supply: 9v - 6 f22display: 2 x 8 dot matrix lcd large characters with back lightauto off: yesbattery low indication: yes weight: 200gms.

We are offering vibration meter ni etc. vibration measurement all three parameters(displacement, acceleration & velocity)suitable for monitoring machinery vibration caused by imbalance, misalignment & gear faultsmicrocontroller basedbattery low indication back light lc displaysmall size & light weight auto power off750 points data loggerrs232 computer interfacedata transmission software technical specifications vibration velocity: 0.1 200 mm/s true rms display: 2 x 16 line back light dot matrix lcd acceleration: 0.1 200m/speak operating temp. Range: 0 - 55cdisplacement: 0.5 2000 m peak - peak casing: absresolution: 0.1 mm/s sealed membrane key padaccuracy: 2% + 0.1 mm/s input connectors: bnc & round frequency response: 10 1khz size:200x100x40 mm power: rechargeable battery pack with charger

We are offering flow cup viscometer. This type of cup has been in popular use for many years and conforms to is 3944 1965 specification. These are available in following sizes: jet no.b-1, b-2, b-3 &b-6 flow cup viscometer deep for 4 viscometer with ddigital temp. Indicator & controller. spare brass cup with any size jet deep for 6 viscometer with digital temp. Indicator & controller.

we are offering ni 38 digital motor checker. features:insulation identify open and short circuits / loose connections in a winding coil identify intertern shorts. detect rotor bar problems without dismounting the rotor inductance of the winding with respect to different positions for rotor for detecting blow holes or cracks in the rotor bars. simple operation, accurate & quick assessment of motor condition. shock proofed rubber casing low battery indicationresistance (ir) measurement technical specifications a) insulation resistance:. . 0 200 m at 500 vdc ( 2% + 1digit), 0.1m resolution0 2000 m at 1000v dc ( 2% + 1digit), 0.1 m resolution b) resistance:range resolution 0 - 200 milli 0.10 milli 0 2 0.001 0 20 0.01 0 200 0.10 c ) inductance:range resolution0 2 m h 0.001 mh0 20mh 0.01 mh0 200 mh 0.1 mh0 2000 mh 1 mh * display:3 lcd * temp.range:0- 55c * size:210x125x65 * weight:1000gms * power: 6 aa size(battery pack with charger optional)

We are offering function generator - ni. features / specification: 5 digit led display (including 3 digits for voltage)frequency and amplitude displayed simultaneouslyoutput waveforms: sine wave, square wave and triangle wavefrequency of output signal: 0.2hz2mhzduty cycle adjustable: 20% 80%width of output signal adjustable continouslyamplitude without attenuation: 0.9v10vamplitude with 20db attenuation:100mv 1vamplitude with 40db attenuation: 10mv100mvpower: ac 110/220v standard accessory: power cord, manual dimension: 270 x 215 x 100mm

We are offering frequency counter. features: 8 digits green led displayselective range, high stabilitytwo channels, operation mode memoryrange and gate time adjustablepower supply: ac 110/220v +10%, max consumption: 5w standard accessory: power chord, manual dimensions: 270 x 215 x 100mm

We are offering rubber shore hardness shore etc.the different types of rubber hardness tester include:shore-a digital rubber hardness testershore-a analoug rubber hardness testershore-d digital rubber hardness testershore-d analoug rubber hardness testerdelivery: ready stockpayment: 100% on deliverytaxes: extra as applicable or 14.5 % cst 5 % against form cguarantee: one year against any manufacturing defect.

We are offering mosquito killer etc. We are offering mosquito killer is a revolutionary device that works on the principles of biotechnology, air current and optics to draw in and kill the mosquitoes easily. The device incorporates uv light source that attracts the mosquitoes and the built-in fan sucks them in and deposits the dead mosquitoes in a holding tray at the bottom of the device. The safe and easy way to fight the mosquito menace. It drawsem in and dropsem dead ideal for home, hospitals, hotels, libraries, restaurants, shopping malls, schools and other large establishments. Its chemical free and completely safe for people and pets. No side effectsno allergyno smokeno pollutionno vapor. detailed product descriptionfeatures :1. attract and capture mosquitoes2. kill bacterium3. get rid off harmful gas4. no noisespecification1. input voltage: 220vac 50hz2. rated power: 6w3. pure weight: 449g4. gross weight: 520g5. package size per device: 188188180mm6. box size (18 pcs in one box):773390380mm

We are offering hot wire anemometer - ni. Features: c/f functionsuper large lcd display with backlightreading the air velocity & temp same timethermistor sensor for temperature measurement, fast response time standard accessory: anemo probe, carrying case dimension: instrument -198(h) x 78(w) 51mm

We are offering electrical equipment. Features vibration measurement all three parameters(displacement, acceleration & velocity)noise test (electronic stethoscope) locate the sound source quickly and accurately in a generally noisy environment with headsetlaser tachometer measurementsuitable for monitoring machinery vibration caused by imbalance, misalignment & gear faultsmicrocontroller basedbattery low indication back light lc display1000 points data loggerrs232 computer interfacedata transmission softwaresmall size & light weight auto power offtechnical specifications vibration velocity : 0.1 200 mm/s true rms accuracy: (1 rev. + 0.1% of reading)acceleration: 0.1 200m/speak power: rechargeable battery pack with chargerdisplacement: 0.5 2000 m peak - peak display: 2 x 16 line back light dot matrix lcd resolution: 0.1 mm/s operating temp. Range: 0 - 55caccuracy: 2% + 0.1 mm/s casing: absfrequency response: 10 1khz sealed membrane key padelectronic stethoscope (noise): stereo type head set input connectors: bnc & round laser tachometer measuring range: 10 30000 rpm size:200x100x40 mm resolution: 1 rpm weight: 500gms (appro.)

We are offering digital vane anemometer - ni. We provide an excellent range of digital vane anemometer that is well noted for accurate measurements and used by many establishments to measure wind factors. Our digital vane anemometers use the latest technology. The digital vane anemometers range is easy to use and have a clear display making the results visible even in low light conditions. Features : compact and light weight designsoft touch buttonsdata holding capacitydata memory : 24 groupsautomatic power off(0.5) 13 mm digital displaycomputerized functioninglong life battery applications: for climatologistsmarine industryfor environmental monitoringwind energy industry special functions: data memorised : 24 groupsair velocity / flow sensor : conventional angled vane arms with low friction ball bearingtemperature sensor : precision thermistoroperating temperature : 0 50oc (32 122of)operating humidity : max. 80% rhpower supply : 4 x 1.5 aaa sizeauto power off : 0 9 minutes set by user standard accessories: sensor probehard carrying casemanual optional accessories: htc rs-232 cable with softwarers-232 usb cable dimensions: instrument : 156(h) x 67(w) x 28mmsensor head : 72(d)mm

Model selection table brookfield dv-e viscometermodel min max rpm no of incrementslvdv-e 1 2mm 0.3-100 18rvdv-e 100 13mm 0.3-100 18hadv-e 200 26mm 0.3-100 18hbdv-e 800 104mm 0.3-100 181 cp achieved with ul adapter accessory. 15 cp on lv with standard spindles. minimum viscosity is achieved with optional rvhahb-1 spindle. m = 1 million cp = centipoise mpas = millipascalseconds whats included?instrument 6 spindles (rvhahb) or 4 spindles (lv)spindle guard leg*lab stand (model a)carrying case*not applicable to ha or hb versionsoptional accessoriesviscosity standards, rvhahb-1 spindle, quick action lab standtemperature bath, small sample adapter, ul adapterthermosel, spiral adapter, din adapterquick connectextension links, vane spindlesapplicationsconsider application and viscosity range when selecting model (lv, rv, ha, hb)lv series low viscosityadhesives (solvent base) biological fluids chemicalsdairy products inks juices oils solventspharmaceuticals polymer solutionsrv series medium viscosityadhesives (hot melt), asphalt (shrp), ceramic slurriesfood products, gums, ointments creams, paints inks coatingspaper pulp, shampoos lotionshahb series high viscositycaulking compounds putty, chocolate, epoxies, inks (ballpoint, offset, lithographic), pastes, peanut butter, roofing compounds, sealantstars

We are offering digital temperature data logger. We are reckoned as a prominent digital temperature data logger supplier, exporter from india. The digital temperature data logger offered by us is obtained from reliable manufacturers and vendors. Our digital temperature data logger is compact equipment used for calculating temperature and humidity level. Besides, we offer digital temperature data logger at industry leading rates. Rh-temp data logger easy logfeatures: memory for 32, 700 readingslcd to show logging information easilyfree selectable measurement cycle from 1sec to 24hrsbattery life : more than 3 years (under ideal condition at 22oc)display all status for alarm and record through 2 ledsalarm display if user-defined max/min values are exceededanalysis software used to view graphically or text mode for logging datausb computer interface (advanced software program for all windows) standard accessory: batteryholding casesafety lockusb cable with software dimensions: 94 x 48 x 33mm

We are offering big display thermo, hygrometer etc. Environment comfort display : comfort, wet, dry. temperature range : 0oc+50oc (+32o120of). temp. Accuracy : +1.0oc (+1.8of). temperature resolving power : 0.1oc (0.1of). humidity range : 30% 90% rh. Humidity accuracy : +5% rh. battery : aaa 1.5v. Time temp humidity indicate. temp. Reading for of & oc. Max and min temperature and humidity memory. Calendar alarm clock, announce hour and 1224 hours system clock.

We are offering online monitor - (ph) etc. Range: 0.00-14.00phresolution: 0.01phaccuracy: +- 0.1ph t1-t2 =5c(t1- the environment of temperature t2-the test liquid temperature)power supply: dc 6v (include with adapter)operating temperature: 0c-50cdimensions: 112mm*86mm*57mmweight 345g digital display, a external transformer, to 24 hours continuous measurement to avoid battery power caused by low reading power

We are offering temperature calibrator - ni. Features: 4 digit lcd displayauto power off (can disable)accuracy + 0.05% standard accessories: test leads, holster, manual dimension: 155(h) x 75(w) x 33(d)mm

we are offering digital electromagnetic Electromagnetic Field Tester to the national and international markets. Our Electromagnetic Field Tester is highly demanded for its precision engineered parts and accurate display. It has a long battery life and has consistent functionality even after years of use. We source the Electromagnetic Field Testers from reputed manufacturers only after ensuring their quality and reliability.Electro Magnetic Field Tester NI-522Features : 3 digits LCD displayAccurate measurementEasy to configureEasy to useFeather touch buttons1999 countDisplays when there is overload (OL)Approximately 100 hrs of Battery life Used For: Research purposeNavigationIndustrial applicationDetecting electric field pollution Standard Accessories: Carrying CaseManual9V Battery Dimensions: 130(H) x 56(W) x 38(D)mm

We are offering leak detectorsfeatures: lcd display with backlightleakage volume in dangerous zone will sound beeping and a red led flashinglow leakage volume display for warning standard accessories: gift box carrying casemanual dimensions: 160(h) x 60(w) 42(d)mm.

model min max rpm no of incrementslvdv-ii+p 1 6mm 0.1-200 50rvdv-ii+p 100 40mm 0.1-200 50hadv-ii+p 200 80mm 0.1-200 50hbdv-ii+p 800 320mm 0.1-200 50 whats included?instrument, 6 spindles (rvhahb) or 4 spindles (lv)spindle guard leg*, lab stand (model s)carrying case, *not applicable to ha or hb versions optional accessoriesrtd temperature probe, new ball bearing suspension (rvhahb)viscosity standards, rvhahb-1 spindle, quick action lab standtemperature bath, small sample adapter, ul adapterthermosel, helipath stand with t-bar spindlesspiral adapter), din adapter, quick connectextension linksvane spindles dv loader software includedcreate custom tests using your pcdv loader allows users to create repeatable custom tests with choices of parameters forspeed, test duration, etc. to be downloaded from a pc to a dv-ii+ pro viscometer. disconnect the dv-ii+pro from the pc for secure, user-defined test methods rheocalc32 software optionalget total control of your instrument and test parametersautomatically control and collect data with rheocalc32 and a dedicated computer. rheocalc32can analyze data, generate multiple plot overlays, print tabular data, run math modelsand perform other time-saving routines. data can be saved in the program or exported to excel. lv series low viscosityadhesives (solvent base), biological fluids, chemicals, dairy products, inksjuices, oils solvents, pharmaceuticals & polymer solutions rv series medium viscosityadhesives (hot melt), asphalt (shrp) ceramic slurries, food products, gumsointments creams, paints inks coatings, paper pulp, shampoos lotions hahb series high viscositycaulking compounds putty, chocolate, epoxies inks (ballpoint, offset, lithographic)pastes, peanut butter, roofing compounds, sealants, tars

We are offering digital meter features: larger dual lcd with backlightdata holdmax / min / avg value with relative time stampzero adjust, offset and dif functionauto power offlow battery indicationusb computer interface(advanced software program for all windows) standard accessories: soft carrying casegift boxtubesmanualbatteryusb cablecd software dimension: 210(h) x 75(w) x 50(d)mm.

We are offering thermo hygrometer - ni. enviorment comfort display:"comfort"."wet", "dry"temperature range: -20c70c(-4f158f)accuracy:+1.0c (+1.8f)humidity range:10%90% humidity accuracy:+5%battery:aaa 1.5vtime/temp/humidity indicatetemp. Reading for f & cmax and min temperature and humidity memorycalendar with alarm clock