We are well reckoned for offering a wide assortment of Enlarge Oblong Master Link Assembly . The Enlarge Oblong Master Link Assembly is designed for use with chain & wire rope. Engineered to perfection, the Enlarge Oblong Master Link Assembly is robust in construction, long lasting, high in strength and rust free. Moreover, our offered Enlarge Oblong Master Link Assembly comes with proof tested and certified WLL (Working Load Limit).

We are involved in providing a huge gamut of Chain Connector . Our offered Chain Connector is widely used in crane manufacturing, construction and engineering industry. The Chain Connector manufactured by us is sturdy enough for lifting and handling heavy material and equipment for attaching them together. Further, the Chain Connector is also stringently tested to assure that it is durable and possesses high load bearing strength. Clients can avail the Chain Connector from us in different specifications at fair prices.

Clients can avail premium quality Forged Alloy D Shackle from us. Our offered Forged Alloy D Shackle is forged alloy steel with alloy pin. The working load limit and size permanently appears on the Forged Alloy D Shackle. The entire assortment of Forged Alloy D Shackle comes with batch codes that give information about the test certificate and quality traceability. Also, 100% magnaflux crack detection is carried out during the manufacturing of the Forged Alloy D Shackle. Details Shackles are Type Approved by DNV & ABS 20, 000 cycle fatigue rated to 1.5 times Working Load Limit Minimum Ultimate Load is 5 times the Working Load Limit Maximun Proof Load is 2.0 times the W orking Load Limit

The Forged Alloy Bow Shackle offered by us comes with screw pin. These Forged Alloy Bow Shackles are approved by DNV & ABS. Forged alloy steel with alloy pins are used to manufacture the Forged Alloy Bow Shackle. Each Forged Alloy Bow Shackle comes with a permanently written working load limit and size. The batch codes of the Forged Alloy Bow Shackle link to its test certificate and quality traceability. Details 100% magnaflux crack detection during manufacturing. 20, 000 cycle fatigue rated to 1.5 times Working Load Limit

We are well reckoned for offering a wide assortment of Enlarge Oblong Master Link Assembly . The Enlarge Oblong Master Link Assembly is designed for use with chain & wire rope. Engineered to perfection, the Enlarge Oblong Master Link Assembly is robust in construction, long lasting, high in strength and rust free. Moreover, our offered Enlarge Oblong Master Link Assembly comes with proof tested and certified WLL (Working Load Limit).

Clients can avail an extensive assortment of Mild Steel Eye Bolts from us at competitive prices. Best grade Mild Steel and cutting-edge technology is used to manufacture the Mild Steel Eye Bolts. Used for several applications in many industries, our Mild Steel Eye Bolts are highly durable, dimensionally accurate, robustly constructed and corrosion resistant. These Mild Steel Eye Bolts are available in varied specifications as per the requirements. Shoulder Nut Eye Bolt - Installation for Angular loading The threaded shank must protrude through the load sufficiently to allow full engagement of the nut. If the eye bolt protrudes so far through the load that the nut cannot be tightened securely against the load, use properly sized washers to take up the extra space Between The Nut And The Load Place washers or spacers between nut and load so that when the nut is tightened securely, the shoulder is secured flush against the load surface. Forged Eye Bolt Warning & Applications (Important Safety Information - Read & Follow Inspection / Maintenance Safety) Never use eye bolt that shows signs of wear or damage Never use eye bolt if eye or shank is bent or elongated. Always be sure threads on shank and receiving holes are clean Never machine, grind, or cut eye bolt. Assembly Safety Never exceed load limits specified in Table I Never use regular nut eye bolts for angular lifts. Always use shoulder nut eye bolts (or machinery eye bolts) for angular lifts. For angular lifts, adjust working load as follows Never undercut an eye bolt to seat shoulder against the load. Always countersink receiving hole or use washers to seat shoulder. Always screw eye bolt down completely for proper seating. Always tighten nuts securely against the load. Shoulder Nut Eye Bolt - Installation for Angular loading Operating Safety Always stand clear of load Never lift load with steady, even pull - do not jerk. Always apply load to eye bolt in the plane of the eye, not at an angle Never exceed the capacity of the eye bolt. When using lifting slings of two or more legs, make sure the loads in the legs are calculated using the angle from the vertical to the leg and properly size the shoulder nut or machinery eye bolt for the angular load. Warnings Loads may slip or fall if proper eye bolt assembly and lifting procedures are not used. A falling load can seriously injure or kill. Read, & understand all instructions and diagrams. Follow all eye bolt safety information provided here.

We are highly acclaimed in the industry for providing superior quality 3 Strand Polypropylene Ropes to the clients. We manufacture the 3 Strand Polypropylene Ropes using latest technology and high grade material. These 3 Strand Polypropylene Ropes are lesser in weight but possess excellent strength. Our offered 3 Strand Polypropylene Ropes are highly resistant to acids, alkalies as well as abrasion. In addition to this, features like low elongation, better knot ability and minimal water absorption make the 3 Strand Polypropylene Ropes high on demand by the clients. Features High strength at lower weights Highly resistant to acids and alkalies Floats in water, does not absorb Low elongation special construction Better knot ability