Other Products / Services #1339170

Nylon Rodis normally specified for bearings etc as the wear and abrasion resistance is very good, it is also used for pulleys and bushes, this is because it can withstand high pressure due to its very high strength, in fact it can withstand up to one tonne per square inch. Nylon Rod is also very good for rollers and spacers. Nylon Rod is very good for applications where minimal maintenance is required or in environments where maintenance access is difficult. Nylon Rod is an excellent engineering plastic for shock resistance and absorption, this helps in specific environments where other materials pass on heavy repeated shock loadings that over time can damage other important and valuable components, Nylon Rod has very good electrical insulation properties that can prove very valuable in reducing risk or adding the advantage of having built in electrical insulation within a piece of plant. Another advantage of Nylon Rod is its resistance to corrosion, many traditional materials have the tendency for the bearing surface to corrode and break down with increased friction and an accelerated demise of important bearings.

• Manufactures wide range of protective caps.

• Manufactures customized and standardized protective caps for number of applications to suit the specific needs of each customer.

OD Fitting / Female Caps

Generally made out of EPDM, fits on the OD of the pipe. Available in standard sizes to suit the pipe standard ANSI 36.10 (2 to 12). Bigger sizes can also be made to order. Caps are used for preventing ingress of foreign particles during maintenance, transportation or in store. Available also in MOC SBR, Nitrile, Neoprene, Silicon.

ID Fitting / Male Caps

For fitting on the ID of the pipe used for preventing deposition of any particles on the ID of the pipe & to prevent damage to the edges of the pipe. Available in sizes 2 to 12. Available in MOC SBR, Nitrile, Neoprene, Silicon.

These EPDM rubber caps are widely used in diverse industries and widely appreciated for their reliability and longer functionality.

Rubber grommets are any variation of eyelets or rings which are used as insulation devices. Grommets are eyelets that are used to strengthen or protect an opening. They are also used to insulate and protect an object passing through an opening. They are inserted into a hole in a mechanical part to prevent grounding, chaffing or mechanical grounding. Rubber grommets are widely used to ensure safety and flexibility in the cable management system.

Types of rubber used to make grommets

• Butyl rubber or isobutylene isoprene elastomer
• Nitrile and styrene butadiene rubber (SBR)

Application

• They are found in shoes, clothing, corsets, curtains, leather, and other fabrics. Grommets that are small in size are called eyelets and are used in clothes.
• Surge protectors, fax/modem lines, electrical wiring outlets and computer cables can be organized properly by using large oval and rectangular grommets.
• Grommets are also used on commercial tarp which is used to cover outdoor furniture, woodpiles or boats, cars etc.
• Cable management means managing large amounts of cabling under floors and this is done by using grommets.

Rubber bushes consist of a rubber cylinder bonded on their outer and there are inner surfaces to rigid metal layers. Bushes are widely used as engineering components and designed to take up torsional movement, axial and radial load and conical deflection. There are various shapes of bushes which are available as standard items in the market while special requirements or sizes can be made to order.

Features

• These bushes are usually designed to accommodate torsional movements and axial and radial loads.
• The rubber is pre-stressed to give the maximum durability and dynamic strength.
• The full movement is taken up by the bonded rubber.
• Lubrication or other bearing maintenance are usually not required.
• The rubber bush has excellent sound and vibration isolation characteristics.
• Using these bushes improve friction, wear and noise, and isolate high frequency vibrations.

We have in store for our clients an extensive array of Rubber to metal bonded products, which cater majorly to the Construction industry. Using high grade raw material, sourced from reliable vendors across the country, we ensure that our range is earmarked for the following attributes:

• Durability
• Premium resistance levels
• Excellent performance levels
• Customized solutions
• Available in various sizes and dimensions

We offer our clients a wide assortment of short blasting rubber sheets that are manufactured using superior quality rubber & are free from blisters. These sheets are used in industries where shot blasting processes are required. All these sheets are available in various sizes and thicknesses, to meet the specifications of our clients.

Applications & Properties

We offer superior quality Rubber Sheets, Rubber Mats that have excellent physical properties, good processing properties and suitable for molding applications with higher transparent requirements. Our sheets come in different manufacturing tolerance. The mats are all-weather proof and protects from water, mud, sand and snow. We can supply sheet cut in strips, in different widths, according to your requirements. Authentic all-weather floor mats feature a deep ribbed channel design to help protect the floor and carpeting from water, mud, sand and snow. Rubber mats come with contrasting logo to complement your new car. Set of four floor mats comes in all variety.

Neoprene rubber sheetused where oil resistance, flame resistance is required. Applied to punch all kinds of oil seals, airproof fittings, washers, work table and ground contacted with oil & grease, pavement for electronic places and apply to punch the gasket with all kinds of shapes and cover on the mechanical equipments.

Silicone Rubber Sheetsrange suitable for continuous use at temperatures from -80oF (-60oC) to 425oF (218oC) and intermittent use from -100oF (-75oC) to 500oF (260oC), depending on media and application. Chemically extremely stable and suitable for use with many acids and alkalis.

EPDM Rubber Sheetsfor outdoor and high ozone environment applications. EPDM rubber sheet also provides better resistance to acids, alkali and ketones than other rubber sheets. EPDM sheet is used for roofing and automotive applications where high temperature (up to 150)and excellent aging characteristics are required. However, EPDM sheet has poor resistance to fuels, oils and alcohols.

Nylon Inserted Rubber Sheetswith middle pressure, strong tense and small distortion. All insertion rubber sheets can be smooth surface, rough surface, cloth marks surface, twin-smooth surface, twin-cloth marks surface to satisfy the requirements of the customers.

• Pressed Steel Casters
• Medium Duty Casters Fabricated
• Heavy Duty Casters Fabricated

PTFE Sheets are wear resistant and mainly used for corrosion prevention application. Sheets made of PTFE are chemically inert and has excellent frame resistance, extremely abrasion resistance, lowest coefficient of friction and can withstand wide range of temperatures. Maximum long term working temperature is plus 260C.Maximum short termworking temperature is plus 260C. Co-efficient of friction is 0.08. Co-efficient of expansion is 12. Melting point is plus 327C.PTFE Teflon sheets will have maximum durability and remain same even after extended time period in water. PTFE Teflon products are the ideal choice fro industries because they can provide effective protection against atmospheric acids.

PTFE Rod is an extremely versatile engineering plastic that has many important performance advantages over other materials and has helped PTFE Rod become one of the most important engineering plastic materials available at the moment. One key important advantage of PTFE Rod is its operating temperature range; it can easily out perform other engineering plastics by being able to perform continuously at -250C, right up to an amazing plus 250C. Another important advantage of PTFE Rod is its outstanding co-efficient of friction. PTFE is excellent for low friction bearings, bushes, rollers and pulleys. PTFE is also almost exclusively used in cryogenic components due to its ultra low operating temperatures. PTFE Rod is regularly used for seals. PTFE Rod has become a very important engineering plastic used within the aerospace industry and aeronautics. PTFE is often used within thefood industrycompanies. Another useful application over the years has been in the use of product or component handles due to its resistance to heat and heat transfer.

PTFE is the chemically inert of the O-ring materials. It is resistant to most chemicals including acids, bases, oils, steam and other chemicals. It is also very tough and abrasive resistant. However the material is not easily compressed, and therefore may not seal as easily as some of the other polymers. Its outstanding tear resistance and abrasive resistance result in its slippery surface properties that make it advantageous for use in seals in moving systems such as mass spectrometer probes and valves.

PTFE is a specially important engineering plastic because of its outstanding lack of friction and slippiness, this is so incredibly low that is has been described as being the slippiest solid material known to man. PTFE is also highly specified due to its very high temperature resistance allowing components to withstand almost double that of other types of engineering plastic. PTFE has the capability to also withstand very strong acids and chemicals helping to provide solutions to acid storage and chemical problems. High electrical resistance is yet another feature of PTFE and PTFE is often used in high end electrical resistance appliances. PTFE also has excellent acid and chemical resistance. Another feature of PTFE is its ability to set by or due to compression. PTFE is also water repellent and is often used in the manufacture of modern high performing, water repellent and breathable clothing.

PTFE is recommended for:

• Chemical environments
• Use is acidic or basic environments
• Sealing of moving or sliding surfaces.
• For sealing applications where there are high temperatures and corrosive liquids or gases involved.

Nylon Sheetis a superb wear and abrasion resistant material and well suited to machining. It has high mechanical strength and good sliding properties. Nylon Sheet is also stiff, has good creep stability and is resistant to many oils and chemicals. Nylon sheet does have a few slight advantages, the first being that it can operate at a very slightly higher temperature and the second advantage of Nylon Sheet is also that it is slightly harder as an engineering plastic. Nylon sheet can be used for pretty much most applications and the natural grade is acceptable with food environments. Typically Nylon Sheet will be used as wear strips or blocks and is very abrasion resistant. Nylon sheet can be machined very easily and provides a smooth surface finish for product contact such as on conveyor systems

Brass is the generic term for a range of copper-zinc alloys with differing combinations of properties, including strength, machinability, ductility, wear-resistance, hardness, colour, antimicrobial, electrical and thermal conductivity, and corrosion-resistance. Brasses set the standard by which the machinability of other materials is judged and are also available in a very wide variety of product forms and sizes to allow minimum machining to finished dimensions. Brass does not become brittle at low temperatures like mild steel. Brass also has excellent thermal conductivity making it a first choice for heat exchangers (radiators). Its electrical conductivity ranges from 23 to 44% that of pure copper.

OAS is the one-stop destination that puts a full stop to your search of Brass Products. The enterprise is actively engaged in Exporting of the Brass Components. We have also set a paradigm of excellence in the worldwide market at the most stupendous Brass Products Exporters and Precision Brass Parts Suppliers, based in India. The Brass Products offered by us also comply with the national as well as international quality norms.

We have brass turned parts to the print & drawing and fastening products for electronics & threaded Inserts for plastic cover and bottom case. We also specialized in processing brass threaded fasteners and copper alloy based accessories for cable and wiring systems and devices. Apart from standard product, All the Brass Products is available in Brass, Satin Gold, Satin Nickel, Copper Antique, Chrome finishes. We assure our customers needs and satisfaction by providing best of our service for brass components matching customers specifications and requirements.

Explore our products now or for further information or query, please feel free to contact us by e-mail, fax, phone, or post/courier.

We offer Latex Examination Gloves and Latex Surgical Gloves that are made from fine grade latex rubber sourced from authentic vendors. They are available in numerous sizes and can be customized as per the clients requirements. In the short span oftwo years, we have able to earn for ourselves a prominent place among the Disposable Latex Gloves Manufacturers and Sterile Latex Examination Gloves Suppliers.Our genuine quality products have enabled us to set standards in the national as well as international markets. We offer most prolific deals at highly affordable prices. Our clients that are spread all over the world are pleased by the timely delivery of our products.

Surgical Gloves Physical Properties:

• Tensile strength before ageing : 24MPa
• Ultiamte elongation before ageing : 750%
• Tensile strength after ageing : 18MPa
• Ultiamte elongation after ageing : 560%
• Total protein Content :