.HYDRATED LIME POWDER

HS CODE NO 25223000

Our range of lime powder is also known as hydrated lime or calcium hydroxide or slaked lime that is used in solution as a bleach. Our range is a dry powder that is formulated by controlled slaking of quicklime with water. Exothermic reaction is captured and used to dissolve the excess slaking water. For "slurry lime" surplus amount of water is not evaporated and the hydrate leftovers as a water suspension.

CHEMICAL COMPONENTS

Available Lime as Ca(OH)2 : 90-95% 85-90% 80-85%

Acid Insolubles (as SiO2) : 0.5-1.0% 0.5-1.0% 1.0-2.0%

Moisture : 0.5-1.0% 0.5-1.0% 1.0-2.0%

Iron (as Fe2O3) : 0.04% 0.08% 0.20%

Alumina (as Al2O3) : 0.02% 0.07% 0.10%

Magnesia(as MgO) : 1.0% 1.0% 1.5%

Dead Burnt Lime (as CaO : ) 02.0% 2.5% 3.5%

Carbon dioxide (as CO2) : 3.0% 3.5% 4.0%

PHYSICAL PROPERTIES

Colour Pure White

Particle Size 300 mesh, 250 mesh, 200 mesh

Physical State Free Flowing Fine Powder

.ammonium sulphate

hs code 31022100

(nh4)2so4

properties for ammonium sulfate

molar mass: 132.14 g/mol

density: 1.769 g/cm3 (20 c)

melting point: 235 to 280 c (455 to 536 f; 508 to 553 k) (decomposes)

ammonium sulfate is an inorganic sulfate salt obtained by reaction of sulfuric acid with two equivalents of ammonia. a high-melting (decomposes above 280?) white solid which is very soluble in water (70.6 g/100 g water at 0?; 103.8 g/100 g water at 100?), it is widely used as a fertilizer for alkaline soils.

chemical properties

ammonium sulfate, also called diammonium sulfate or sulfuric acid diammonium salt, is a white crystalline solid with no smell. it tastes salty. the compound dissolves easily in water but will not dissolve in alcohol or acetone. it readily absorbs water, so if its exposed to moist air, it will scab on the damp surfaces. the chemical formula for ammonium sulfate is (nh?)?so?. when ammonium sulfate reacts with alkaline substances, it gives off ammonia gas.

use in fertilizers

ammonium sulfate is used most commonly as an artificial fertilizer for alkaline soils. when introduced into damp soil, an ammonium ion is released. this creates a small amount of acid, which lowers the ph balance of the soil. it also contributes nitrogen, which aids in plant growth. it dissolves relatively slowly, which makes it cheaper than some other artificial fertilizers. ammonium sulfate is also used as an herbicide because it will burn the leaves of plants and either kill them outright or at least weaken them for easy removal.

ammonium sulphate

the product ammonium sulphate is composed of 21% nitrogen and 24% sulphur. it is essentially an inorganic salt that is obtained when ammonia is treated with sulphuric acid. ammonium sulphate also occurs in nature as mascagnite which is a rare mineral that can be found in volcanic fumaroles. it is also commonly known as diammonium sulfate or sulfuric acid diammonium salt. ammonium sulfate is a white crystalline solid in appearance. it has no smell and is salty to taste. although it does not cause harm, certain precautions are necessary while handling this chemical. ammonium sulphate has a wide variety of commercial uses, the most common being as soil fertiliser.

usage

the major products that utilise ammonium sulphate can be classified as follows:

fertilisers for crops and lawns.

additives in biotechnical as well as pharmaceutical products.

water treatment products and as an additive in cleaning agents.

no agriculture related business can afford to miss using fertilisers containing ammonium sulphate because they help convert alkaline soil into acidic soil, thus enhancing the overall yield of crops.

the pharmaceutical industry makes use of ammonium sulphate for water purification and in the manufacture of vaccines. ammonium sulphate helps the pharmaceutical industry by salting out excess proteins and contaminants.

ammonium sulphate also works as an excellent decontaminant. as such, it is used in detergents, toothpaste, shampoo, dental cleansers and a host of other household cleaning products. it can also soften water excellently.

sulfur is a chemical element with the symbol s and atomic number 16. it is abundant, multivalent, and nonmetallic. under normal conditions, sulfur atoms form cyclic octatomic molecules with a chemical formula s. elemental sulfur is a bright yellow, crystalline solid at room temperature.

symbol : s

atomic mass : 32.065 u

atomic number : 16

electron configuration : [ne] 3s3p

electronegativity : 2.58

group: chalcogen (group 16)

having various sulphur powder like rubber grade, industrial grade and agriculture grade

rubber makers sulphur powder (tyre brand )

tyre brand sulphur powder is a quality product used as thevulcanising agentin the manufacture of rubber products. it is manufactured keeping a number of parameters such as ash, acidity, moisture and particle size carefully monitored to ensure superior quality of sulphur powder.

tyre brand rubber maker's sulphur powder is recommended for improved production and quality of end product.available in 50 kg hdpe bag

TRIETHYLAMINE (TEA)

HS CODE 29211990

Exporter, Importer, Manufacturer, Wholesaler and Supplier of TriEthylAmine (TEA) based in Chennai, India. TriEthylAmine is the chemical compound with the formula N(CH?CH?)?, commonly abbreviated Et?N. It is also abbreviated TEA, yet this abbreviation must be used carefully to avoid confusion with triethanolamine or tetraethylammonium, for which TEA is also a common abbreviation. Distilled / Recovered TriEthylAmine (TEA) Manufacturer and Supplier based in Chennai, India.

Density: 726 kg/m

Molar Mass: 101.19 g/mol

Boiling Point: 89 C

Formula: C6H15N

Classification: Organic compound

Triethylamine is mainly used in the production of quaternary ammonium compounds for textile auxiliaries and quaternary ammonium salts of dyes. It is also a catalyst and acid neutralizer for condensation reactions and is useful as an intermediate for manufacturing medicines, pesticides and other chemical.

Packaging Details :- Drums and Tanker.

Percentage :- 99%++

STEARIC ACID

HS Code: 38231190

Chemical Formula: C18H36O2

Description

Stearic acid is a saturated fatty acid with an 18-carbon chain and has the IUPAC name octadecanoic acid. It is a waxy solid and its chemical formula is C17H35CO2H. The salts and esters of stearic acid are called stearates. As its ester, stearic acid is one of the most common saturated fatty acids found in nature following palmitic acid. The triglyceride derived from three molecules of stearic acid is called stearin.

Properties

Formula: C18H36O2

Molar mass: 284.48 g/mol

Boiling point: 361 C

Density: 941 kg/m

Appearance: White solid

Stearic Acid

We offer an exclusive range of Stearic Acid flame retardants that are formulated from best grades of chemicals. These are stringently tested on quality parameters testing for the accurate composition, effectiveness, pH value, purity etc.

Feature : White crystalline Powder/Flakes.

Applications

Cosmetics and chemical specialty

Textile auxillaries, Plastics, Cosmetics and Stearates

Activated calcium carbonate industry, Buffing compounds

Metal polishes and Metallic stearates.

Tyre rubber compounding

General rubber compounding.

Grease

.ACID SLURRY

HS CODE NO 34029099

Acid Slurry OR LABSA

We are one of the Trader of Labsa, Keeping in mind the requirements of Powder/Liquid detergent industry. Liquid Detergent industry wants thick viscous liquids with yellow to dark brownish colors. We also formulate special grades to cater to this segment keeping in mind their requirements and price constraints.

Uses:

Its a major industrial surfactant used in the formulations of various types of household & industrial detergents. All domestic detergent powders, cakes, liquids, household cleaners, cleaning powders are made from this. Its called workhorse of detergents industry. As of today, detergent industry is totally dependant on this surfactant. Its also used as emulsifier in agricultural pesticides/herbicides.

It finds applications in textiles as washing and mercerizing aid

Its used in paints as wetting and dispersing agent

Its also used in the manufacturing of textile auxiliaries

Grades :

We trading various grades formulated for specific end uses:

Top grade is of 90% strength and is a very light coloured product, suitable for white and coloured detergent powders and liquids. It also provides brilliance to coloured detergent powders, liquids and cakes.

Lower grades of acid slurry are formulated specially for use in liquid detergents as per customers requirements of parameters i.e quality, price and colour of liquid detergents required of it.

Specifications of standard product is as follows :

Product : Acid Slurry/LABSA

Appearance: Light Brownish transparent viscous liquid

Solubility: Soluble in water

Active Matter: 90 +-2%

Free Sulphuric Acid: 5-7%

Un sulfonated matter: 0.5 1.5%

Moisture: 2-3 %

Special Grades : Various grades of Acid slurry keeping in mind the requirements of liquid detergent industry. This segment of industry wants thick viscous liquids with yellow to dark brownish colours. We formulate various grades to cater to this segment keeping in mind their requirements and price constraints.

Packing:

We offer this product in convenient packings as follows :

50Kg/60 Kg and 200 Kg HDPE carboys/Barrel

.talc powder

hs code 25262000

using talc as filler in paper imparts valuable properties to the final product

1.improved printability

it makes the paper smooth and slippery due to which it runs smoothly through the printing process.

it offers compressibility which ensures maximum ink transfer thereby improving opacity of printing and allowing minimum mottling, smearing or missing dots.

2.better look and feel

talc is high in whiteness and thus results in high whiteness of the paper. talc adsorbs the optical brighteners and/or color coatings added to the paper due to which they stay on the surface of the paper, providing maximum effect.

its smoothness and slipperiness gives good finish to the paper.

3.improved strength and durability

talc offers high paper strength potential which implies that one can load high amounts of the filler with minimum compromise on the final strength of the paper.

barrier coatings are often added to the paper to impart durability. talc minimizes water vapor transmission from the paper, thereby further enhancing the sealing effect of the coatings.

4.improves efficiency of the paper making process itself

talc is hydrophobic in nature and therefore permanently absorbs organic particles present in paper pulp called pitch (or stickies, if they are tacky in behaviour) into its molecular layers. such particles would otherwise adversely impact the paper making process.

talc is soft and therefore causes minimum wear and tear of machines through the paper making process.

talc improves drainage of water thereby allowing the paper to dry quickly. further it minimizes loss of other substances during drainage.

for use in paper industry, pulverized material of 300 bss sieve is required, which is free from gritty material and contains low levels of caco3 and feo.

we can access every suitable grade of talc and blend them to your requirement with consistency, perfection and cost effectiveness.

against order we are ready to supply for the following industries suitable talk powder

agriculture

ceramics

cosmetics

paint

paper

pharmaceuticals

pigment

plastics

rubber

.sodium nitrite

hs code:28341010

chemical formula:nano2

description

sodium nitrite is the inorganic compound with the chemical formula nano2. it is a white to slightly yellowish crystalline powder that is very soluble in water and is hygroscopic. it is a useful precursor to a variety of organic compounds, such as pharmaceuticals, dyes, and pesticides, but it is probably best known as a food additive to prevent botulism.

properties

chemical formula: nano2

molar mass: 68.9953 g/mol

appearance: white or slightly yellowish solid

density:2.168 g/cm3

melting point: 271 c (520 f; 544 k) (decomposes at 320 c)

solubility in water: 71.4 g/100 ml (0 c)

solubility: soluble in methanol (4.4 g/100 ml)

acidity (pka): 9

magnetic susceptibility (): 14.5106 cm3/mol

refractive index : 1.65

uses

industrial uses

the main use of sodium nitrite is for the industrial production of organonitrogen compounds. it is a reagent for conversion of amines into diazo compounds, which are key precursors to many dyes, such as diazo dyes. nitroso compounds are produced from nitrites. these are used in the rubber industry.

it is used in a variety of metallurgical applications, for phosphatizing and detinning.[citation needed]

sodium nitrite is an effective corrosion inhibitor and is used as an additive in industrial greases, as an aqueous solution in closed loop cooling systems, and in a molten state as a heat transfer medium.

inhibition of microbial growth

sodium nitrite is well known for its role in inhibiting the growth of clostridium botulinum spores in refrigerated meats. the mechanism for this activity results from the inhibition of iron-sulfur clusters essential to energy metabolism of clostridium botulinum. however, sodium nitrite has had varying degrees of effectiveness for controlling growth of other spoilage or disease causing microorganisms. even though the inhibitory mechanisms for sodium nitrite are not well known, its effectiveness depends on several factors including residual nitrite level, ph, salt concentration, reductants present and iron content.furthermore, the type of bacteria also affects sodium nitrites effectiveness. it is generally agreed upon that sodium nitrite is not considered effective for controlling gram-negative enteric pathogens such as salmonella and escherichia coli.

.OXALIC ACID

HS Code oxalic acid 29171110

Oxalic acid is an organic compound with the formula CHO. It is a colorless crystalline solid that forms a colorless solution in water. Its condensed formula is HOOCCOOH, reflecting its classification as the simplest dicarboxylic acid. Its acid strength is much greater than that of acetic acid.

Formula: C2H2O4

Molar mass: 90.03 g/mol

Conjugate base: Hydrogenoxalate

IDLH (Immediate danger): 500 mg/m3

UN number: 3261

Main hazards: corrosive

Oxalic Acid offered chemical is exceptional in terms of quality and made from high grade inputs sourced from a reliable vendor base. This chemical dissolves in water to give a colorless solution.

Oxalic acid-99.6%

It will using various application and consuming industries like

In pharmaceutical industry as a component or intermediate.

As a bleaching agent in textile industry.

In leather tanning.

As a precipitating agent in Rare Earths Industry.

In manufacturing of some of the dyes and other chemicals.

As a grinding agent in Tile manufacturing industry for polishing.

Waste water treatment.

Removing of paint and varnishes.

As an auto radiator cleanser.

As a disinfectant to control bacteria and germs

Available in 50 kg bag

.PEG 400

POLYETHYLENE GLYCOL 400

HS Code 29094900

PEG 400 is a low-molecular-weight grade of polyethylene glycol. It is a clear, colorless, viscous liquid. Due in part to its low toxicity, PEG 400 is widely used in a variety of pharmaceutical formulations.

Density : 1.13 g/cm

Formula : C2nH4n+2On+1, n=8.2to9.1

Viscosity 90.0 cSt at 25 C, 7.3 cSt at99 C

Molar mass 380-420 g/mol

Melting point:4 to 8 C (39 to 46 F; 277 to 281 K)

LD50 (median dose) : 30 mL/kg, orally in rats

PEG 400 (polyethylene glycol 400) is a low-molecular-weight grade of polyethylene glycol. It is a clear, colorless, viscous liquid. Due in part to its low toxicity,

PEG 400 is widely used in a variety of pharmaceutical formulations.

PEG 400 is soluble in water, acetone, alcohols, benzene, glycerin, glycols, and aromatic hydrocarbons, and is slightly soluble in aliphatic hydrocarbons.

PEG 400 USES / PEG APPLICATION

PEGs are usually employed in a huge number of pharmaceutical products as a dispensing agent, solvents, medications and delivery liquids, tablets to fillers, as a treatment for constipation, and as suppository bases, in ophthalmic solutions. PEGs are also used in lubricants and veterinary products.PEGs are usually employed in a huge number of pharmaceutical products as a dispensing agent, solvents, medications and delivery liquids, tablets to fillers, as a treatment for constipation, and as suppository bases, in ophthalmic solutions. PEGs are also used in lubricants and veterinary products.

Methylene Di Chloride

HS code 29031200

Dichloromethane is an organochloride compound with the formula CH?Cl?. This colorless, volatile liquid with a chloroform-like, sweet odour is widely used as a solvent. Although it is not miscible with water, it is polar, and miscible with many organic solvents.

Density: 1.33 g/cm

Formula: CH2Cl2

Boiling point: 39.6 C

IUPAC ID: Dichloromethane

Molar mass: 84.93 g/mol

Melting point: -96.7 C

Methylene chloride is used in aerosols as a strong solvent, a flammability suppressant, vapor pressure depressant, and viscosity thinner. Methylene chloride is an important solvent in adhesive formulations where its strong dissolving power, low flammability and rapid drying time are essential.

DOLOMITE POWDER

HS Code 25181000

The mineral dolomite is commonly found in deposits of a sedimentary rock called dolostone. There are two types of materials often called dolomite, a true chemically uniform calcium magnesium carbonate with the chemical formula CaMg(CO3)2, and a dolomite limestone, which is just an irregular mixture of calcium and magnesium carbonates. Dolomite is believed to have formed by replacement of some of the calcium in a calcium carbonate limestone deposit with magnesium. The calcium and magnesium ions in dolomite exist. Dolomite has a calcium layer, then a carbonate layer, then a magnesium layer then a carbonate layer, and so on. Dolomite is harder and denser than the calcite form of calcium carbonate or limestone

Available in Dolamite various grade

Industrial Dolamite Powder 98%

Glass Grade Dolamite Powder 5%

100 Mesh Dolamote Powder 90%

MIX XYLENE

HS CODE 29024400

Exporter, Importer, Manufacturer, Wholesaler and Supplier of mix xylene based in Tailnadu , India. Xylene (mix/ortho) is a mixture of three benzene derivatives that is used as a solvent in the printing, rubber, leather and allied industries. Mix Xylene is colorless, sweet-smelling liquid that is very flammable and renowned for its intoxicating properties.Distilled / Recovered Mix Xylene Manufacturer and Supplier based in Tamilnadu States, India.

Product Details:

Usage - Industrial

Packaging Type - Barrels and Tanker

Packaging Size - 180 kg

Formula - C8H10

Physical Appearance - Colorless, Flammable -Liquid

Density - 0.864 g/mL

Boiling Point - 138.5 degree Celsius

Flash Point - 30 degree Celsius

Toxicity - Moderate to Low Flammability High.

Area of Application - Printing, Rubber and Leather Industries Chemical

Solvent Grade Mixed Xylene is used as a solvent in various industries, such as paints and coatings, printing, rubber & leather, etc. Mixed Xylene is used for various applications. For instance, it is used in to enhance the octane number of gasoline.

USES

Solvet : Orthoxylene is the most preferred solvent in the aromatics range due to its narrow

distillation range, relatively low volatility and high solvency

2. Pesticides: Orthoxylene is used a carrier solvent in many pesticide formulation

3. Paints: Orthoxylene is a preferred solvent in paints as a true solvent in the production of Alkyd and

Amino resins. It is also used in formulations of high quality industrial coatings such automotive,

marine, baking enamels, furniture lacquers and other protective coatings.

4. Printing Inks: Ortho Xylene is used in the manufacture of liquid inks used over a wide variety of applications. The good solvency also contributes to consistent tint development and tint stability in the ink formulations

5. Oil Field Chemicals: High solvency and relatively higher flash point makes OX a prime Solvent in the manufacture of Oil field chemicals like Pour Point Depressants etc.

.CITRIC ACID MONO ANHYDROUS

HS code 29181400

We are having Citric acid Monohydrae as well as anhydrous powder

Product CharactersWhite Crystalline Powders, Colorless Crystals or Granules

Executive StandardsBP/USP/FCC/E330/GB1886.235-2016

Packaging plastic woven bag, 25kg net composite paper-plastic bags or 3-ply kraft paper bags with PE liner, 500kg or 1000kg net PP woven Jumbo bags

Storage kept in a light-proof, well-colsed, dry and cool place

Main UsageCitric Acid is mainly used as acidulant, flavoring agent, preservative and antistaling agent in food and beverage industry, it is also used as antioxidant, plasticizer and detergent in chemical, cosmetics and cleaning industries.

BORIC ACID POWDER TECH

BORIC ACID POWDER GRANULLER TECH

HS CODE 28100020

We are engaged in supplying, trading and distributing Boric Acid. Owing to its antiseptic and insecticide nature, the offered acid is processed using advanced techniques. Besides, this acid is available in various packaging sizes at market leading prices.

Features:

Accurate pH value

Environment friendliness

Longer shelf life

Uses:

Pest control

Medicines

Wood preservative

While processing fiberglass and glass

Idealy use as flame retardant and corrosion inhibitor

Use in ceramic industry

Packing : 50 Kg Bag

.potassium silicate

hs code 28399090

standard grade

specification

colour : clear to whitish viscous liquid

odour : odourless or slight musty odour

k2o : 8.30 -12.70 % w/w

sio2 : 20.8 26.50 % w/w

solids : 29.0 39.20 % w/w

weight ratio : 2.10 2.50

molar ratio : 3.29 3.92

ph : 11.3 11.70

sp. gravity : 1.25 1.38 at 25 oc

features, benefits & applications

a) potassium silicate is more soluble and compatible with other ingredients than sodium silicate. it is used in various formulations like heavy duty detergents, soaps, etc.

b) compared to sodium silicate it does not form white carbonate film efflorescence on exposure to atmosphere. this makes them preferred choice in decorative coating, paints, etc.

c) it is used as binder during production of welding rod, as soft violet flame of potassium is easier to see through during welding compared to blinding yellow flame of sodium.

d) potassium silicate is convenient source of potassium for plant nutrients.

e) as it melts and flows at high temperature, it is used as binder in refractory mortar and specialty cements.

f) non tacky property makes it important additive in mortars, acid lining, etc.

ISOPROPYL ALCOHOL

HS Code: 29051220

Chemical Formula: C3H8O

Other Names: 2-propanol, sec-propyl alcohol, IPA, or isopropanol

Description

Isopropyl alcohol (IUPAC name propan-2-ol; commonly called isopropanol) is a compound with the chemical formula C3H8O. It is a colorless, flammablechemical compound with a strong odor. As an isopropyl group linked to a hydroxyl group, it is the simplest example of a secondary alcohol, where the alcoholcarbon atom is attached to two other carbon atoms. It is a structural isomer of 1-propanol and ethyl methyl ether.

It is used in the manufacture of a wide variety of industrial and household chemicals, and is a common ingredient in chemicals such as antiseptics, disinfectants and detergents

Properties

Isopropyl alcohol is miscible in water, ethanol, ether, and chloroform.

It will dissolve ethyl cellulose, polyvinyl butyral, many oils, alkaloids, gums and natural resins.

Unlike ethanol or methanol, isopropyl alcohol is not miscible with salt solutions and can be separated from aqueous solutions by adding a salt such as sodium chloride. The process is colloquially called salting out, and causes concentrated isopropyl alcohol to separate into a distinct layer.

Isopropyl alcohol forms an azeotrope with water, which gives a boiling point of 80.37 C (176.67 F) and a composition of 87.7 wt% (91 vol%) isopropyl alcohol. Water-isopropyl alcohol mixtures have depressed melting points.[9] It has a slightly bitter taste, and is not safe to drink.[9][10]

Isopropyl alcohol becomes increasingly viscous with decreasing temperature and will freeze at 89 C (128 F).

Isopropyl alcohol has a maximum absorbance at 205 nm in an ultraviolet-visible spectrum.

ISOPROPYL ALCOHOL USES AND APPLICATION

Solvent

Isopropyl alcohol dissolves a wide range of non-polar compounds. It also evaporates quickly, leaves nearly zero oil traces, compared to ethanol, and is relatively non-toxic, compared to alternative solvents. Thus, it is used widely as a solvent and as a cleaning fluid, especially for dissolving oils.

Medical

Isopropyl alcohol is used as a water-drying aid for the prevention of otitis externa, better known as swimmers ear.

Early uses as an anesthetic

Although isopropyl alcohol can be used for anesthesia, its many negative attributes or drawbacks prohibit this use. Isopropyl alcohol can also be used similarly to ether as a solvent or as an anesthetic by inhaling the fumes or orally. Early uses included using the solvent as general anesthetic for small mammals and rodents by scientists and some veterinarians. However, it was soon discontinued, as many complications arose, including respiratory irritation, internal bleeding, and visual and hearing problems. In rare cases, respiratory failure leading to death in animals was observed.

Laboratory

As a biological specimen preservative, isopropyl alcohol provides a comparatively non-toxic alternative to formaldehyde and other synthetic preservatives. Isopropyl alcohol solutions of 7099% are used to preserve specimens.

Available in 160 Kgs Carboy

.MAGNESIUM SULPHATE

HS CODE 28332100

Magneisum Sulphate Powder, comprising of magnesium, sulfur and oxygen, is considered as vital for plants growth and to replenish the deficiency of magnesium or sulfur in the soil. These are widely sprayed or applied on roses, potatoes, lemon trees, tomatoes, peppers and carrots. With its high solubility in water, the magnesium sulphate powder is best for foliar feeding applications.

CAS number10034-99-8

Molecular formulaMgSO4.7H2O

Molar mass246.47 g/mol

AppearanceWhite crystalline solid

Density1.68 g/cm3

Melting point150 C

Solubility in water71 g/100 mL (20 C)

Solubility1.16 g/100 mL (18 C, ether)

Insoluble inAcetone and slightly soluble in alcohol and glycerol

CHINA CLAY

HS CODE 25070021

Kaolinite

Kaolinite is a clay mineral, with the chemical composition Al?Si?O?(OH)?. It is an important industrial mineral. It is a layered silicate mineral, with one tetrahedral sheet of silica linked through oxygen atoms to one octahedral sheet of alumina octahedra.

Luster: Pearly to dull earthy

Optical properties: Biaxial ()

Specific gravity: 2.162.68

Crystal class: Pedial (1); (same H-M symbol)

Crystal system: Triclinic

USES

Kaolin, also called china clay, soft white clay that is an essential ingredient in the manufacture of china and porcelain and is widely used in the making of paper, rubber, paint, and many other products.

BLEACHING POWDER

hs code 28281010

We are one of the suppliers and exporters of Bleaching Powder. The superior quality ingredients are procured from the authentic vendors of the market to formulate these chemicals as per the set industry standards and norms. Owing to their safe packaging and effectiveness, these chemicals are widely demanded by the clients.

Features of the product are as follows:

Unique composition

Purity

Longer shelf life

SBP contains 34-36 per cent of available chlorine. It reports very low loss of available chlorine over an extended period of time and even during changing climatic conditions. This is mainly because of the low moisture content of the final product and absence of heavy metal impurities in the raw material.

Our Tradding SBP is free flowing, soluble in cold water, and the preferred choice among consumers.

Applications

Disinfectant in the treatment of potable water

Bleaching agent in textile industry

Sanitiser during epidemic control

Aqua culture

Carpet and the pulp and paper industry

Hospitals, health departments, hotels, offices, homes

Swimming pool

Laundry, sugar mills, sewage disposal and sodium silicate industry

.HYDROCHLORIC ACID

HS Code: 28061000

Molecular Formula: HCl

Description

Hydrochloric acid is a colorless inorganic chemical system with the formula HCl. Hydrochloric acid has a distinctive pungent smell. It is mainly produced as a precursor to vinyl chloride for PVC. It is classified as strongly acidic and can attack the skin over a wide composition range, since the hydrogen chloride practically dissociates completely in solution

Hydrochloric acid is the simplest chlorine-based acid system containing water. It is a solution of hydrogen chloride and water, and a variety of other chemical species, including hydronium and chloride ions. It is an important chemical reagent and industrial chemical, used primarily in the production of polyvinyl chloride for plastic. In households, diluted hydrochloric acid is often used as a descaling agent. In the food industry, hydrochloric acid is used as a food additive and in the production of gelatin. Hydrochloric acid is also used in leather processing.

Chemical properties

HCl is a strong, monoprotic acid, which means it can release only one H+ ion (proton).

Being a strong acid, it gets completely dissociated in water to give the hydronium and chloride ions. It readily reacts with bases to form chloride salts.

Concentrated HCl dissolves many metals and forms oxidized metal chlorides and hydrogen gas.

Dilute HCl can break down or digest many chemical and biological samples.

Uses

Hydrochloric acid has many industrial uses, such as in the production of various chlorides, plastics (such as PVC and polyurethane), fertilizerand dyes.

It is also used in the photographic, textile, and rubber industries, as well as in gelatin production, leather processing and household cleaning products.

Available in 40Kgs Can and Tanker Load

CAUSTIC POTASH FLAKES (KOH)

Potassium Hydroxide

HS Code 28152000

Potassium hydroxide is an inorganic compound with the formula KOH, and is commonly called caustic potash. Along with sodium hydroxide, KOH is a prototypical strong base. It has many industrial and niche applications, most of which exploit its caustic nature and its reactivity toward acids.

Formula: KOH

Molar mass: 56.1056 g/mol

IUPAC ID : Potassium hydroxide

Density : 2.12 g/cm

Melting point: 360 C

Boiling point : 1, 327 C

Soluble in: Water, Alcohol, Glycerol

ADVANTAGES

PC guarantees minimum 90% purity of KOH

Caustic Potash Flakes is stable even at

High Temperatures.

QCD is equipped with most modern instruments to analyze special test on request.

Features :

White flaky substance

Free from mercury

Low iron content

High thermal stability

Dissolves in water at room temperature

Soluble in methanol, ethanol and propanol

Absorbs wat

USES

Potassium Carbonate manufacture Dye Stuff industry

Rubber Chemicals

Potassium Permanganate Manufacture

Acid Neutralization

Other Potassium based chemicals

Pharmaceuticals

Food products

Liquid fertilizers

Potassium compounds

Packaging :

50 Kg. HDPE bags for domestic supplies

.SODIUM NITRATE

HS Code: 31025000

Chemical Formula: NaNO3

Sodium nitrate is the chemical compound with the formula NaNO ?. This alkali metal nitrate salt is also known as Chile saltpeter to distinguish it from ordinary saltpeter, potassium nitrate. The mineral form is also known as nitratine, nitratite or soda niter.

Formula: NaNO3

IUPAC ID: Sodium nitrate

Molar mass: 84.9947 g/mol

Melting point: 308 C

Density: 2.26 g/cm

Boiling point: 380 C

Sodium nitrate is a white solid very soluble in water. It is a readily available source of the nitrate anion (NO3), which is useful in several reactions carried out on industrial scales for the production of fertilizers, pyrotechnics glass and pottery enamels, food preservatives (esp. meats), and solid rocket propellant. It has been mined extensively for these purposes.

USES

Metal Treastment Chemical Manufacturers

Phosphating Chemical Manufacturer

Pharmaceuticals Manufacturer

Glass Industries

Explosive Industries

Fertilizer Chemical Manufacturer

NC Industrial Thinner we specialize in offering industrial thinners, which meet the requirements of our clientele. These thinners are acknowledged for the features like purity, durability, precise ph value and accurate composition. Available in various these are customized according to the clients specific requirements. Our company also ensures that the products are in complaint with the industry standards and have applications in various industries

.caustic soda lye 47 to 48%

( sodium hydroxide solution )

hsn code : 28151200

exclusive features : mercury free low iron content

advantages

our materials guarantees 47% purity of naoh for c.s. lye for gradei, and 30% purity of naoh for c.s. lye for gradeii and caustic soda flakes minimum 99.50% purity of naoh for c.s. flakes (dry basis)

applications

acid neutralization

aluminum products

dyes & pharmaceuticals

extraction of petroleum products

extraction of zinc

processing of vegetable oils

pulp & paper

rayon

regeneration of water treatment resigns

rubber chemicals

soap industries

sodium salts

packing

c.s. lye in tanker load as well as 50 kg hdpe can

CALCITE POWDER

HS CODE 25309030

we offer calcite powder, white washing powder, calcite crystal, calcite grit, calcite granules and micronized calcite.

Calcite Powder Use in Plastic: Calcite mineral widely used as mineral fillers in order to obtain high humidity retention, to improve the consistency and dryness of the final mass. These polymers have various applications like in bags, pipes, automotive parts, furniture, containers if etc

feldspar

hs code 25291020

feldspar is an abundant rock-forming mineral which usually ranges from off-white, or pink to pale-coloured. it is known as a natural source of potassium oxide (k2o), sodium oxide (na2o) and aluminium oxide (al2o3)

feldspar comprises a group of minerals containing potassium, sodium, calcium & aluminium silicates. it is a universal flux used in all types of ceramic bodies &glaze. feldspars are primarily used in industrial application for their alumina & alkli content. we supply both high quality sodium & potassium feldspar as per client requirement . the glass & ceramic industries are the major consumers of feldspar. available in chips & powder form.

feldsper lumps/ chips in 2-5 mm and larger sizes :

potash feldsper (pink) : 12.5%(k2o), 2%(na2o), 0.15%(fe2o3)

soda feldspar (white) : 9.5%(k2o), 1.5%(na2o), 0.15%(fe2o3)

against order we are supplying the following grade

potash feldspar lumps

potash feldspar powder

soda feldspar lumps

soda feldspar powder

CALCIUM CHLORIDE ANHYDROUS POWDER

CALCIUM CHLORIDE POWDER

HS CODE NO 28272000

Product Specification

Purity 90 to 95%

Chemical Formula CACL2

CAS Number 10043-52-4

Physical State/Form Powder Anhydrous

Product Groups Inorganic Solids, Inorganic Inter

Specific Gravity 1.3

Density 2.15 g/cm3

Melting Point 772 Degree C

Boiling Point 1, 935 Degree C

Appearance White Powder

Molar mass 110.98 g/mol

Compound Formula CaCl2

Minimum Order 50 Kg

Product Description

Available in form of white crystalline powder or granular form, Calcium Chloride offered finds use as main ingredient in different ready to eat food items. Available under formula CaCl2, molar mass of 110.98 g/mol, melting point of 772 C, density of 2.15 g/cm and boiling point of 1, 935 C, it is salt of calcium & chlorine and finds use in brine for refrigeration plants, desiccation and other applications. Being soluble in water, it also serves as calcium ion source in aqueous solution.

Calcium chloride is used as road salt for melting snow, a drying agent in desiccators, for dehydrating organic liquids and gases, in oil and gas drilling, as a dust-proofing agent, food additives, concrete hardening accelerator, Construction, Chemical Manufacturing if etc.,

Additional Information

Delivery Time Immediate

Packaging Details Available in 40/50 Kg HDPE bag with inner Plastic liner

.CALCIUM CHLORIDE FUSED

HSN Code 28272000

Calcium chloride is an inorganic compound, a salt with the chemical formula CaCl?. It is a white coloured crystalline solid at room temperature, and it is highly soluble in water. It can be created by neutralising hydrochloric acid with calcium hydroxide.

Molar mass : 110.98 g/mol

Formula : CaCl2

IUPAC ID : Calcium chloride

Boiling point : 1, 935 C

Melting point : 772 C

Soluble in : Water, Acetic acid, Alcohol, Acetone

Calcium Chloride Fused Lumps that are widely used in cement manufacturing, concrete additive and oil drilling wells, bitumen industries, iceing industries if etc

Product Features:

Purity

Correct formulation

Effectiveness

Long shelf life

APPLICATIONS

Calcium chloride is a versatile product providing unique contributions in widely varying applications:-

Agriculture: Post-Harvest

Agriculture: Pre-Harvest

Brining

Concrete Acceleration

Drilling Fluid Additive

Food Processing

Hydrocarbon Dehydration

Ice Melting: Road & Highway

Ice Melting: Sidewalks

Industrial

Refrigeration

Roads: Dust Control

Roads: Base Stabilization

Roads: Full-Depth Reclamation

Tire Weighting

Water Treatment

.Tri Sodium Phosphate

HS Code:28353100

Chemical Formula:Na3PO4

Description

Trisodium phosphate (TSP) is the inorganic compound with the chemical formula Na3PO4. It is a white, granular or crystalline solid, highly soluble in water, producing an alkaline solution. TSP is used as a cleaning agent, builder, lubricant, food additive, stain remover, and degreaser.

The item of commerce is often partially hydrated and may range from anhydrous Na3PO4 to the dodecahydrate Na3PO4 12H2O. Most often found in white powder form, it can also be called trisodium orthophosphate or simply sodium phosphate.

Properties

Formula: Na3PO4

Molar mass: 163.94 g/mol

Gibbs free energy (fG): -1819 kJ/mol (anhydrous)

Basicity (pKb): 2.23

Heat capacity (C): 665 J/molK (dodecahydrate)

GHS hazard statements: H315, H318, H335

Uses

Trisodium phosphate was at one time extensively used in formulations for a variety of consumer-grade soaps and detergents, and the most common use for trisodium phosphate has been in cleaning agents. The pH of a 1% solution is 12 (i.e., very basic), and the solution is sufficiently alkaline to saponify grease and oils. In combination with surfactants, TSP is an excellent agent for cleaning everything from laundry to concrete driveways.

TSP is commonly used after cleaning a surface with mineral spirits to remove hydrocarbon residues and may be used with household chlorine bleach in the same solution without hazardous reactions.[citation needed] This mixture is particularly effective for removing mildew, but is less effective at removing mold.[citation needed]

Although it is still the active ingredient in some toilet bowl-cleaning tablets, TSP is generally not recommended for cleaning bathrooms because it can stain metal fixtures and can damage grout.

YELLOW OXIDE

HS Code:28211010

Chemical Formula:FeO(OH)

Description

Yellow oxide is one kind of oxides with stable chemical properties. Iron oxide yellow is widely used in painting, scagliola and concrete due to its bright and pure color, good weather proof and high opacity, also can be used as colorant for ink, rubber, paper and so on.

Properties

Color: Yellow

Density (g/cm3): 0.2 to 0.7

Physical State: Solid, fine amorphous powder

Solubility in Water: Slightly

Boiling Point (C): Not applicable

Flash Point: Not flammable

Specific Gravity: 4.1 to 4.3

pH Value: Neutral

Odor: Odorless

Uses

Yellow iron oxide (CAS 51274-00-1) is used as a pigment, e.g. Pigment Yellow 42 or C.I. 77492. Pigment Yellow 42 is Food and Drug Administration (FDA) approved for use in cosmetics and is used in some tattoo inks. Solid material color ranges from yellow through dark-brown to black. Iron oxide-hydroxide is also used in aquarium water treatment as a phosphate binder.Recently, two forms of Iron oxide-hydroxides nanoparticles were identified as very good adsorbents for lead removal from aquatic media.

AOS LIQUID

AOS PASTE

AOS POWDER

Alpha Olefin Sulphonates - AOS

HS CODE 34021190

we are dealing AOS Liquid, AOS Phaste international accepting brand.

Packaging Size 50/300 Kgs

Brand Godrej

Grade Industrial

Packaging Form Barrel

Packaging Type HDPE Barrel

Is It Organic Organic

Minimum Order Quantity 50 Kg

SODIUM META BISULPHITE

HS CODE NO28321010

We offer pure and active Sodium Meta Bi Sulfite. This is an inorganic compound having chemical formula Na2S2O5. We offer chemicals as specified by our clients. Having a CAS no. of 7681-57-4 and molecular weight 190.11.

Physical and Chemical Properties:

Appearance:Fine, white granular material

Odor : Pungent sulphur di oxide odor

pH: 4.3 (1% solution)

Specific gravity: 1.48 (@20 C).

Solubility: 39% in water (Weight, @16 C)

Other Properties:

It is highly hygroscopic product.keep it preserved in container/bag properly.

Keep it away from heat, light, moisture etc.

Application:

Bleaching agent (e.g. candies, cake) loose agent (e.g. bread, cracker, etc).

Antiseptic and germicide (e.g. fruit juice, tinned food, etc).

Inhibitor and freshening agent (e.g. day lily, seafood, fruit and vegetable, etc).

Available in 50/25 kg bag

CYCLO-HEXANE

HS CODE 29021100

Cyclohexane is a cycloalkane with the molecular formula C?H??. Cyclohexane is non-polar. Cyclohexane is a colorless, flammable liquid with a distinctive detergent-like odor, reminiscent of cleaning products.

Formula: C6H12

Boiling point: 80.75 C

Density: 779 kg/m

Molar mass: 84.16 g/mol

Exporter, Importer, Manufacturer, Distributor, Wholesaler and Supplier of Cyclohexane Cyclohexane is a cycloalkane with the molecular formula C6H12. Cyclohexane is non-polar. Cyclohexane is a colorless, flammable liquid with a distinctive detergent-like odor, reminiscent of cleaning products (in which it is sometimes used). Cyclohexane is mainly used for the industrial production of adipic acid and caprolactam, which are precursors to nylon.

Most cyclohexane goes into the production of intermediates for nylon, which has a variety of common applications such as clothing, tents and carpets as well as thermoplastics. Cyclohexane is also used as a solvent in chemical and industrial processes and recently has been substituted for benzene in many applications.

MORPHOLINE

HS CODE 29349920

Supplier of Morpholine. Our product range also comprises of Acrylamide, Acrylic Acid and Alkyl Ketene Dimer Wax.

Morpholine

Clients can avail from us a chemical known as Morpholine, which is widely used in various industries like pharmaceutical, textile, and agricultural. This chemical is acclaimed by our clients for its longer shelf life, precise pH value and accurate composition.

Available in 200 Kgs Drum

.PHOSPHORIC ACID TGECHNICAL GRADE

HS Code : 28092010

We provide pure phosphoric acid that is synthesized using quality raw material. It is available in colorless, transparent as well as in light colored thick liquid. Phosphoric acid is used in various industries including medical and food. Further, owing to the high quality standards, these acids are using in food, agriculture and chemical industries. Some of the chemical specifications of Phosphoric Acid are as follows:

Appearance: transparent colorless fluid

Content: 85% mm

Chloride: 0.0005% max

Sulphate: 0.005% max

Heavy metal: 0.001% max

Arsenic: 0.005% max

Iron: 0.002% max

Acetic acid: 2% max

Uses

Food-grade phosphoric acid (additive E338[13]) is used to acidify foods and beverages such as various colas and jams. It provides a tangy or sour taste.

In anti-rust treatment by phosphate conversion coating

In phosphoric acid fuel cells.

In activated carbon production.

In microfabrication to etch silicon nitride selectively with respect to silicon dioxide.

As a pH adjuster in cosmetics and skin-care products.

As a sanitizing agent in the dairy, food, and brewing industries.

SULPHURIC ACID

HS Code: 28070010

Description

Sulfuric acid (alternative spelling sulphuric acid), also known as vitriol, is a mineral acid composed of the elements sulfur, oxygen and hydrogen, with molecular formula H2SO4. It is a colorless, odorless, and syrupy liquid that is soluble in water, in a reaction that is highly exothermic.

Its corrosiveness can be mainly ascribed to its strong acidic nature, and, if at a high concentration, its dehydrating and oxidizing properties. It is also hygroscopic, readily absorbing water vapor from the air.Upon contact, sulfuric acid can cause severe chemical burns and even secondary thermal burns; it is very dangerous even at moderate concentrations.

Properties

Chemical formula: H2SO4

Molar mass: 98.079 g/mol

Appearance: Clear, colorless liquid

Odor: odorless

Density: 1.8302 g/cm3, liquid

Melting point: 10.31C (50.56 F; 283.46 K)

Boiling point 337C (639 F; 610 K) When sulfuric acid is above 300 C (572 F), it will decompose slowly

Solubility in water: miscible, exothermic

Vapor pressure: 0.001 mmHg (20 C)

Acidity (pKa): 3, 1.99

Conjugate base: Hydrogen sulfate

Viscosity: 6.7 cP (20 C)

Uses

Sulphuric Acid is used in chemical industry for production of detergents, synthetic resins, dyestuffs, pharmaceuticals, petroleum catalysts, insecticides and antifreeze, as well as in various processes such as oil well acidicizing, aluminium reduction, paper sizing, water treatment. About 6% of uses are related to pigments and include paints, enamels, printing inks, coated fabrics and paper, and the rest is dispersed into a multitude of applications such as production of explosives, cellophane, acetate and viscose textiles, lubricants, non-ferrous metals, and batteries.

Industrial cleaning agent

Sulfuric acid is used in large quantities by the iron and steelmaking industry to remove oxidation, rust, and scaling from rolled sheet and billets prior to sale to the automobile and major appliances industry.[citation needed] Used acid is often recycled using a spent acid regeneration (SAR) plant. These plants combust spent acid[clarification needed] with natural gas, refinery gas, fuel oil or other fuel sources. This combustion process produces gaseous sulfur dioxide (SO2) and sulfur trioxide (SO3) which are then used to manufacture "new" sulfuric acid. SAR plants are common additions to metal smelting plants, oil refineries, and other industries where sulfuric acid is consumed in bulk, as operating a SAR plant is much cheaper than the recurring costs of spent acid disposal and new acid purchases.

Hydrogen peroxide (H2O2) can be added to sulfuric acid to produce piranha solution, a powerful but very toxic cleaning solution with which substrate surfaces can be cleaned. Piranha solution is typically used in the microelectronics industry, and also in laboratory settings to clean glassware.

HYDROGEN PEROXIDE
HS CODE NO 28470000

Hydrogen peroxide is a chemical compound with the formula H 2O 2. It is the simplest peroxide and in its pure form is a colorless liquid, slightly more viscous than water.Formula: 2(HO)Density: 1.45 g/cmMolar mass: 34.0147 g/molBoiling point: 150.2 CIUPAC ID: dihydrogen dioxideMelting point: -0.43 C

Basic Info.Quality:First ClassClassification:Hydrogen PeroxideGrade Standard:Industrial GradeBleaching:OxidingExport Markets:Global

Packing:IBC Drum, 30/35kg Drum, ISO TankStandard:60%, 50%, 35%, 27.5%Application: H2O2 is a strong and environmental friendly oxidizer. It is used to bleach textile and paper products, manufacturer or process foodstuffs, minerals, petrochemicals and consumer products (detergent). Also used for industrial waste treatment(detoxification).

Specific Hazards: H2O2 is a strong oxidizer and will not burn, but its decomposition liberate oxygen which supports combustion. Contacts with organical substances or some impurities, reducing agent or combustible materials, H2O2 will decompose rapidly which may cause explosion. Corrosive, cause burns to skin, eyes, and respiratory tract, Harmful if swallowed or inhaled.

Extinguishing media: A Large amount of water

Storage & handling: Store the product in a ventilated and cool place, prevent from direct sunshine, heat and combustible substances. If the package is damaged and there's any spill, use large quantities of water to flush it. Do not store the product on wood pallets or wood floors.

HYDROCHLORIC ACID

HS Code: 28061000

Molecular Formula: HCl

Other Names: Hydronium chloride, Chlorhydric Acid

Description

• Hydrochloric acid is a colorless inorganic chemical system with the formula HCl. Hydrochloric acid has a distinctive pungent smell. It is mainly produced as a precursor to vinyl chloride for PVC. It is classified as strongly acidic and can attack the skin over a wide composition range, since the hydrogen chloride practically dissociates completely in solution
• Hydrochloric acid is the simplest chlorine-based acid system containing water. It is a solution of hydrogen chloride and water, and a variety of other chemical species, including hydronium and chloride ions. It is an important chemical reagent and industrial chemical, used primarily in the production of polyvinyl chloride for plastic. In households, diluted hydrochloric acid is often used as a descaling agent. In the food industry, hydrochloric acid is used as a food additive and in the production of gelatin. Hydrochloric acid is also used in leather processing.

Chemical properties

• HCl is a strong, monoprotic acid, which means it can release only one H+ ion (proton).
• Being a strong acid, it gets completely dissociated in water to give the hydronium and chloride ions. It readily reacts with bases to form chloride salts.
• Concentrated HCl dissolves many metals and forms oxidized metal chlorides and hydrogen gas.
• Dilute HCl can break down or digest many chemical and biological samples.

Uses

• Hydrochloric acid has many industrial uses, such as in the production of various chlorides, plastics (such as PVC and polyurethane), fertilizerand dyes.
• It is also used in the photographic, textile, and rubber industries, as well as in gelatin production, leather processing and household cleaning products.
• Available in 40Kgs Can and Tanker Load

FERROUS SULPHATE

HS CODE 28332910

Ferrous is a necessary micronutrient required in protein synthesis and for ensuring seed quality and uniform maturity. Ferrous deficiency is common high pH, calcareous and low organic atter content soils. To rectify the deficiency and as a nutrient we provide the product in various physical forms and purity as per the application.

CAS NO. 7782-63-0

Common name Ferrous Sulphate

mono 30%

Molecular Formula FeSO, .H, O

Molecular weight 170.01

Apperance Light Greenish White Powder

% of Iron (Fe) MIN 30 %

CAS NO 7720-78-7

Common name Ferrous Sulphate

Hepta(Crystal)

Molecular formula FeSO, .7H, O

Molecular weight 278.01

Appearance Greenish Crystalline

% of Iron (Fe) MIN 19

Ferrous sulfate is the chemical compound with the formula FeSO4. Known since ancient times as copperas and as green vitriol, the blue-green heptahydrate is the most common form of this material. All iron sulfates dissolve in water to give the same aquo complex [Fe(H2O)6]2+, which has octahedral molecular geometry and paramagnetic.

Available in 25/50 Kgf Bagf

Features:

Purity

Efficacy

Non-toxic chemicals

Clinically approved

.HYDRATED LIME POWDER

HS CODE NO 25223000

Our range of lime powder is also known as hydrated lime or calcium hydroxide or slaked lime that is used in solution as a bleach. Our range is a dry powder that is formulated by controlled slaking of quicklime with water. Exothermic reaction is captured and used to dissolve the excess slaking water. For "slurry lime" surplus amount of water is not evaporated and the hydrate leftovers as a water suspension.

CHEMICAL COMPONENTS

Available Lime as Ca(OH)2 : 90-95% 85-90% 80-85%

Acid Insolubles (as SiO2) : 0.5-1.0% 0.5-1.0% 1.0-2.0%

Moisture : 0.5-1.0% 0.5-1.0% 1.0-2.0%

Iron (as Fe2O3) : 0.04% 0.08% 0.20%

Alumina (as Al2O3) : 0.02% 0.07% 0.10%

Magnesia(as MgO) : 1.0% 1.0% 1.5%

Dead Burnt Lime (as CaO : ) 02.0% 2.5% 3.5%

Carbon dioxide (as CO2) : 3.0% 3.5% 4.0%

PHYSICAL PROPERTIES

Colour Pure White

Particle Size 300 mesh, 250 mesh, 200 mesh

Physical State Free Flowing Fine Powder

.ammonium sulphate

hs code 31022100

(nh4)2so4

properties for ammonium sulfate

molar mass: 132.14 g/mol

density: 1.769 g/cm3 (20 c)

melting point: 235 to 280 c (455 to 536 f; 508 to 553 k) (decomposes)

ammonium sulfate is an inorganic sulfate salt obtained by reaction of sulfuric acid with two equivalents of ammonia. a high-melting (decomposes above 280?) white solid which is very soluble in water (70.6 g/100 g water at 0?; 103.8 g/100 g water at 100?), it is widely used as a fertilizer for alkaline soils.

chemical properties

ammonium sulfate, also called diammonium sulfate or sulfuric acid diammonium salt, is a white crystalline solid with no smell. it tastes salty. the compound dissolves easily in water but will not dissolve in alcohol or acetone. it readily absorbs water, so if its exposed to moist air, it will scab on the damp surfaces. the chemical formula for ammonium sulfate is (nh?)?so?. when ammonium sulfate reacts with alkaline substances, it gives off ammonia gas.

use in fertilizers

ammonium sulfate is used most commonly as an artificial fertilizer for alkaline soils. when introduced into damp soil, an ammonium ion is released. this creates a small amount of acid, which lowers the ph balance of the soil. it also contributes nitrogen, which aids in plant growth. it dissolves relatively slowly, which makes it cheaper than some other artificial fertilizers. ammonium sulfate is also used as an herbicide because it will burn the leaves of plants and either kill them outright or at least weaken them for easy removal.

ammonium sulphate

the product ammonium sulphate is composed of 21% nitrogen and 24% sulphur. it is essentially an inorganic salt that is obtained when ammonia is treated with sulphuric acid. ammonium sulphate also occurs in nature as mascagnite which is a rare mineral that can be found in volcanic fumaroles. it is also commonly known as diammonium sulfate or sulfuric acid diammonium salt. ammonium sulfate is a white crystalline solid in appearance. it has no smell and is salty to taste. although it does not cause harm, certain precautions are necessary while handling this chemical. ammonium sulphate has a wide variety of commercial uses, the most common being as soil fertiliser.

usage

the major products that utilise ammonium sulphate can be classified as follows:

fertilisers for crops and lawns.

additives in biotechnical as well as pharmaceutical products.

water treatment products and as an additive in cleaning agents.

no agriculture related business can afford to miss using fertilisers containing ammonium sulphate because they help convert alkaline soil into acidic soil, thus enhancing the overall yield of crops.

the pharmaceutical industry makes use of ammonium sulphate for water purification and in the manufacture of vaccines. ammonium sulphate helps the pharmaceutical industry by salting out excess proteins and contaminants.

ammonium sulphate also works as an excellent decontaminant. as such, it is used in detergents, toothpaste, shampoo, dental cleansers and a host of other household cleaning products. it can also soften water excellently.

sulfur is a chemical element with the symbol s and atomic number 16. it is abundant, multivalent, and nonmetallic. under normal conditions, sulfur atoms form cyclic octatomic molecules with a chemical formula s. elemental sulfur is a bright yellow, crystalline solid at room temperature.

symbol : s

atomic mass : 32.065 u

atomic number : 16

electron configuration : [ne] 3s3p

electronegativity : 2.58

group: chalcogen (group 16)

having various sulphur powder like rubber grade, industrial grade and agriculture grade

rubber makers sulphur powder (tyre brand )

tyre brand sulphur powder is a quality product used as thevulcanising agentin the manufacture of rubber products. it is manufactured keeping a number of parameters such as ash, acidity, moisture and particle size carefully monitored to ensure superior quality of sulphur powder.

tyre brand rubber maker's sulphur powder is recommended for improved production and quality of end product.available in 50 kg hdpe bag

TRIETHYLAMINE (TEA)

HS CODE 29211990

Exporter, Importer, Manufacturer, Wholesaler and Supplier of TriEthylAmine (TEA) based in Chennai, India. TriEthylAmine is the chemical compound with the formula N(CH?CH?)?, commonly abbreviated Et?N. It is also abbreviated TEA, yet this abbreviation must be used carefully to avoid confusion with triethanolamine or tetraethylammonium, for which TEA is also a common abbreviation. Distilled / Recovered TriEthylAmine (TEA) Manufacturer and Supplier based in Chennai, India.

Density: 726 kg/m

Molar Mass: 101.19 g/mol

Boiling Point: 89 C

Formula: C6H15N

Classification: Organic compound

Triethylamine is mainly used in the production of quaternary ammonium compounds for textile auxiliaries and quaternary ammonium salts of dyes. It is also a catalyst and acid neutralizer for condensation reactions and is useful as an intermediate for manufacturing medicines, pesticides and other chemical.

Packaging Details :- Drums and Tanker.

Percentage :- 99%++

STEARIC ACID

HS Code: 38231190

Chemical Formula: C18H36O2

Description

Stearic acid is a saturated fatty acid with an 18-carbon chain and has the IUPAC name octadecanoic acid. It is a waxy solid and its chemical formula is C17H35CO2H. The salts and esters of stearic acid are called stearates. As its ester, stearic acid is one of the most common saturated fatty acids found in nature following palmitic acid. The triglyceride derived from three molecules of stearic acid is called stearin.

Properties

Formula: C18H36O2

Molar mass: 284.48 g/mol

Boiling point: 361 C

Density: 941 kg/m

Appearance: White solid

Stearic Acid

We offer an exclusive range of Stearic Acid flame retardants that are formulated from best grades of chemicals. These are stringently tested on quality parameters testing for the accurate composition, effectiveness, pH value, purity etc.

Feature : White crystalline Powder/Flakes.

Applications

Cosmetics and chemical specialty

Textile auxillaries, Plastics, Cosmetics and Stearates

Activated calcium carbonate industry, Buffing compounds

Metal polishes and Metallic stearates.

Tyre rubber compounding

General rubber compounding.

Grease

.ACID SLURRY

HS CODE NO 34029099

Acid Slurry OR LABSA

We are one of the Trader of Labsa, Keeping in mind the requirements of Powder/Liquid detergent industry. Liquid Detergent industry wants thick viscous liquids with yellow to dark brownish colors. We also formulate special grades to cater to this segment keeping in mind their requirements and price constraints.

Uses:

Its a major industrial surfactant used in the formulations of various types of household & industrial detergents. All domestic detergent powders, cakes, liquids, household cleaners, cleaning powders are made from this. Its called workhorse of detergents industry. As of today, detergent industry is totally dependant on this surfactant. Its also used as emulsifier in agricultural pesticides/herbicides.

It finds applications in textiles as washing and mercerizing aid

Its used in paints as wetting and dispersing agent

Its also used in the manufacturing of textile auxiliaries

Grades :

We trading various grades formulated for specific end uses:

Top grade is of 90% strength and is a very light coloured product, suitable for white and coloured detergent powders and liquids. It also provides brilliance to coloured detergent powders, liquids and cakes.

Lower grades of acid slurry are formulated specially for use in liquid detergents as per customers requirements of parameters i.e quality, price and colour of liquid detergents required of it.

Specifications of standard product is as follows :

Product : Acid Slurry/LABSA

Appearance: Light Brownish transparent viscous liquid

Solubility: Soluble in water

Active Matter: 90 +-2%

Free Sulphuric Acid: 5-7%

Un sulfonated matter: 0.5 1.5%

Moisture: 2-3 %

Special Grades : Various grades of Acid slurry keeping in mind the requirements of liquid detergent industry. This segment of industry wants thick viscous liquids with yellow to dark brownish colours. We formulate various grades to cater to this segment keeping in mind their requirements and price constraints.

Packing:

We offer this product in convenient packings as follows :

50Kg/60 Kg and 200 Kg HDPE carboys/Barrel

.talc powder

hs code 25262000

using talc as filler in paper imparts valuable properties to the final product

1.improved printability

it makes the paper smooth and slippery due to which it runs smoothly through the printing process.

it offers compressibility which ensures maximum ink transfer thereby improving opacity of printing and allowing minimum mottling, smearing or missing dots.

2.better look and feel

talc is high in whiteness and thus results in high whiteness of the paper. talc adsorbs the optical brighteners and/or color coatings added to the paper due to which they stay on the surface of the paper, providing maximum effect.

its smoothness and slipperiness gives good finish to the paper.

3.improved strength and durability

talc offers high paper strength potential which implies that one can load high amounts of the filler with minimum compromise on the final strength of the paper.

barrier coatings are often added to the paper to impart durability. talc minimizes water vapor transmission from the paper, thereby further enhancing the sealing effect of the coatings.

4.improves efficiency of the paper making process itself

talc is hydrophobic in nature and therefore permanently absorbs organic particles present in paper pulp called pitch (or stickies, if they are tacky in behaviour) into its molecular layers. such particles would otherwise adversely impact the paper making process.

talc is soft and therefore causes minimum wear and tear of machines through the paper making process.

talc improves drainage of water thereby allowing the paper to dry quickly. further it minimizes loss of other substances during drainage.

for use in paper industry, pulverized material of 300 bss sieve is required, which is free from gritty material and contains low levels of caco3 and feo.

we can access every suitable grade of talc and blend them to your requirement with consistency, perfection and cost effectiveness.

against order we are ready to supply for the following industries suitable talk powder

agriculture

ceramics

cosmetics

paint

paper

pharmaceuticals

pigment

plastics

rubber

.sodium nitrite

hs code:28341010

chemical formula:nano2

description

sodium nitrite is the inorganic compound with the chemical formula nano2. it is a white to slightly yellowish crystalline powder that is very soluble in water and is hygroscopic. it is a useful precursor to a variety of organic compounds, such as pharmaceuticals, dyes, and pesticides, but it is probably best known as a food additive to prevent botulism.

properties

chemical formula: nano2

molar mass: 68.9953 g/mol

appearance: white or slightly yellowish solid

density:2.168 g/cm3

melting point: 271 c (520 f; 544 k) (decomposes at 320 c)

solubility in water: 71.4 g/100 ml (0 c)

solubility: soluble in methanol (4.4 g/100 ml)

acidity (pka): 9

magnetic susceptibility (): 14.5106 cm3/mol

refractive index : 1.65

uses

industrial uses

the main use of sodium nitrite is for the industrial production of organonitrogen compounds. it is a reagent for conversion of amines into diazo compounds, which are key precursors to many dyes, such as diazo dyes. nitroso compounds are produced from nitrites. these are used in the rubber industry.

it is used in a variety of metallurgical applications, for phosphatizing and detinning.[citation needed]

sodium nitrite is an effective corrosion inhibitor and is used as an additive in industrial greases, as an aqueous solution in closed loop cooling systems, and in a molten state as a heat transfer medium.

inhibition of microbial growth

sodium nitrite is well known for its role in inhibiting the growth of clostridium botulinum spores in refrigerated meats. the mechanism for this activity results from the inhibition of iron-sulfur clusters essential to energy metabolism of clostridium botulinum. however, sodium nitrite has had varying degrees of effectiveness for controlling growth of other spoilage or disease causing microorganisms. even though the inhibitory mechanisms for sodium nitrite are not well known, its effectiveness depends on several factors including residual nitrite level, ph, salt concentration, reductants present and iron content.furthermore, the type of bacteria also affects sodium nitrites effectiveness. it is generally agreed upon that sodium nitrite is not considered effective for controlling gram-negative enteric pathogens such as salmonella and escherichia coli.

.OXALIC ACID

HS Code oxalic acid 29171110

Oxalic acid is an organic compound with the formula CHO. It is a colorless crystalline solid that forms a colorless solution in water. Its condensed formula is HOOCCOOH, reflecting its classification as the simplest dicarboxylic acid. Its acid strength is much greater than that of acetic acid.

Formula: C2H2O4

Molar mass: 90.03 g/mol

Conjugate base: Hydrogenoxalate

IDLH (Immediate danger): 500 mg/m3

UN number: 3261

Main hazards: corrosive

Oxalic Acid offered chemical is exceptional in terms of quality and made from high grade inputs sourced from a reliable vendor base. This chemical dissolves in water to give a colorless solution.

Oxalic acid-99.6%

It will using various application and consuming industries like

In pharmaceutical industry as a component or intermediate.

As a bleaching agent in textile industry.

In leather tanning.

As a precipitating agent in Rare Earths Industry.

In manufacturing of some of the dyes and other chemicals.

As a grinding agent in Tile manufacturing industry for polishing.

Waste water treatment.

Removing of paint and varnishes.

As an auto radiator cleanser.

As a disinfectant to control bacteria and germs

Available in 50 kg bag

.PEG 400

POLYETHYLENE GLYCOL 400

HS Code 29094900

PEG 400 is a low-molecular-weight grade of polyethylene glycol. It is a clear, colorless, viscous liquid. Due in part to its low toxicity, PEG 400 is widely used in a variety of pharmaceutical formulations.

Density : 1.13 g/cm

Formula : C2nH4n+2On+1, n=8.2to9.1

Viscosity 90.0 cSt at 25 C, 7.3 cSt at99 C

Molar mass 380-420 g/mol

Melting point:4 to 8 C (39 to 46 F; 277 to 281 K)

LD50 (median dose) : 30 mL/kg, orally in rats

PEG 400 (polyethylene glycol 400) is a low-molecular-weight grade of polyethylene glycol. It is a clear, colorless, viscous liquid. Due in part to its low toxicity,

PEG 400 is widely used in a variety of pharmaceutical formulations.

PEG 400 is soluble in water, acetone, alcohols, benzene, glycerin, glycols, and aromatic hydrocarbons, and is slightly soluble in aliphatic hydrocarbons.

PEG 400 USES / PEG APPLICATION

PEGs are usually employed in a huge number of pharmaceutical products as a dispensing agent, solvents, medications and delivery liquids, tablets to fillers, as a treatment for constipation, and as suppository bases, in ophthalmic solutions. PEGs are also used in lubricants and veterinary products.PEGs are usually employed in a huge number of pharmaceutical products as a dispensing agent, solvents, medications and delivery liquids, tablets to fillers, as a treatment for constipation, and as suppository bases, in ophthalmic solutions. PEGs are also used in lubricants and veterinary products.

Methylene Di Chloride

HS code 29031200

Dichloromethane is an organochloride compound with the formula CH?Cl?. This colorless, volatile liquid with a chloroform-like, sweet odour is widely used as a solvent. Although it is not miscible with water, it is polar, and miscible with many organic solvents.

Density: 1.33 g/cm

Formula: CH2Cl2

Boiling point: 39.6 C

IUPAC ID: Dichloromethane

Molar mass: 84.93 g/mol

Melting point: -96.7 C

Methylene chloride is used in aerosols as a strong solvent, a flammability suppressant, vapor pressure depressant, and viscosity thinner. Methylene chloride is an important solvent in adhesive formulations where its strong dissolving power, low flammability and rapid drying time are essential.

DOLOMITE POWDER

HS Code 25181000

The mineral dolomite is commonly found in deposits of a sedimentary rock called dolostone. There are two types of materials often called dolomite, a true chemically uniform calcium magnesium carbonate with the chemical formula CaMg(CO3)2, and a dolomite limestone, which is just an irregular mixture of calcium and magnesium carbonates. Dolomite is believed to have formed by replacement of some of the calcium in a calcium carbonate limestone deposit with magnesium. The calcium and magnesium ions in dolomite exist. Dolomite has a calcium layer, then a carbonate layer, then a magnesium layer then a carbonate layer, and so on. Dolomite is harder and denser than the calcite form of calcium carbonate or limestone

Available in Dolamite various grade

Industrial Dolamite Powder 98%

Glass Grade Dolamite Powder 5%

100 Mesh Dolamote Powder 90%

MIX XYLENE

HS CODE 29024400

Exporter, Importer, Manufacturer, Wholesaler and Supplier of mix xylene based in Tailnadu , India. Xylene (mix/ortho) is a mixture of three benzene derivatives that is used as a solvent in the printing, rubber, leather and allied industries. Mix Xylene is colorless, sweet-smelling liquid that is very flammable and renowned for its intoxicating properties.Distilled / Recovered Mix Xylene Manufacturer and Supplier based in Tamilnadu States, India.

Product Details:

Usage - Industrial

Packaging Type - Barrels and Tanker

Packaging Size - 180 kg

Formula - C8H10

Physical Appearance - Colorless, Flammable -Liquid

Density - 0.864 g/mL

Boiling Point - 138.5 degree Celsius

Flash Point - 30 degree Celsius

Toxicity - Moderate to Low Flammability High.

Area of Application - Printing, Rubber and Leather Industries Chemical

Solvent Grade Mixed Xylene is used as a solvent in various industries, such as paints and coatings, printing, rubber & leather, etc. Mixed Xylene is used for various applications. For instance, it is used in to enhance the octane number of gasoline.

USES

Solvet : Orthoxylene is the most preferred solvent in the aromatics range due to its narrow

distillation range, relatively low volatility and high solvency

2. Pesticides: Orthoxylene is used a carrier solvent in many pesticide formulation

3. Paints: Orthoxylene is a preferred solvent in paints as a true solvent in the production of Alkyd and

Amino resins. It is also used in formulations of high quality industrial coatings such automotive,

marine, baking enamels, furniture lacquers and other protective coatings.

4. Printing Inks: Ortho Xylene is used in the manufacture of liquid inks used over a wide variety of applications. The good solvency also contributes to consistent tint development and tint stability in the ink formulations

5. Oil Field Chemicals: High solvency and relatively higher flash point makes OX a prime Solvent in the manufacture of Oil field chemicals like Pour Point Depressants etc.

.CITRIC ACID MONO ANHYDROUS

HS code 29181400

We are having Citric acid Monohydrae as well as anhydrous powder

Product CharactersWhite Crystalline Powders, Colorless Crystals or Granules

Executive StandardsBP/USP/FCC/E330/GB1886.235-2016

Packaging plastic woven bag, 25kg net composite paper-plastic bags or 3-ply kraft paper bags with PE liner, 500kg or 1000kg net PP woven Jumbo bags

Storage kept in a light-proof, well-colsed, dry and cool place

Main UsageCitric Acid is mainly used as acidulant, flavoring agent, preservative and antistaling agent in food and beverage industry, it is also used as antioxidant, plasticizer and detergent in chemical, cosmetics and cleaning industries.

BORIC ACID POWDER TECH

BORIC ACID POWDER GRANULLER TECH

HS CODE 28100020

We are engaged in supplying, trading and distributing Boric Acid. Owing to its antiseptic and insecticide nature, the offered acid is processed using advanced techniques. Besides, this acid is available in various packaging sizes at market leading prices.

Features:

Accurate pH value

Environment friendliness

Longer shelf life

Uses:

Pest control

Medicines

Wood preservative

While processing fiberglass and glass

Idealy use as flame retardant and corrosion inhibitor

Use in ceramic industry

Packing : 50 Kg Bag

.potassium silicate

hs code 28399090

standard grade

specification

colour : clear to whitish viscous liquid

odour : odourless or slight musty odour

k2o : 8.30 -12.70 % w/w

sio2 : 20.8 26.50 % w/w

solids : 29.0 39.20 % w/w

weight ratio : 2.10 2.50

molar ratio : 3.29 3.92

ph : 11.3 11.70

sp. gravity : 1.25 1.38 at 25 oc

features, benefits & applications

a) potassium silicate is more soluble and compatible with other ingredients than sodium silicate. it is used in various formulations like heavy duty detergents, soaps, etc.

b) compared to sodium silicate it does not form white carbonate film efflorescence on exposure to atmosphere. this makes them preferred choice in decorative coating, paints, etc.

c) it is used as binder during production of welding rod, as soft violet flame of potassium is easier to see through during welding compared to blinding yellow flame of sodium.

d) potassium silicate is convenient source of potassium for plant nutrients.

e) as it melts and flows at high temperature, it is used as binder in refractory mortar and specialty cements.

f) non tacky property makes it important additive in mortars, acid lining, etc.

ISOPROPYL ALCOHOL

HS Code: 29051220

Chemical Formula: C3H8O

Other Names: 2-propanol, sec-propyl alcohol, IPA, or isopropanol

Description

Isopropyl alcohol (IUPAC name propan-2-ol; commonly called isopropanol) is a compound with the chemical formula C3H8O. It is a colorless, flammablechemical compound with a strong odor. As an isopropyl group linked to a hydroxyl group, it is the simplest example of a secondary alcohol, where the alcoholcarbon atom is attached to two other carbon atoms. It is a structural isomer of 1-propanol and ethyl methyl ether.

It is used in the manufacture of a wide variety of industrial and household chemicals, and is a common ingredient in chemicals such as antiseptics, disinfectants and detergents

Properties

Isopropyl alcohol is miscible in water, ethanol, ether, and chloroform.

It will dissolve ethyl cellulose, polyvinyl butyral, many oils, alkaloids, gums and natural resins.

Unlike ethanol or methanol, isopropyl alcohol is not miscible with salt solutions and can be separated from aqueous solutions by adding a salt such as sodium chloride. The process is colloquially called salting out, and causes concentrated isopropyl alcohol to separate into a distinct layer.

Isopropyl alcohol forms an azeotrope with water, which gives a boiling point of 80.37 C (176.67 F) and a composition of 87.7 wt% (91 vol%) isopropyl alcohol. Water-isopropyl alcohol mixtures have depressed melting points.[9] It has a slightly bitter taste, and is not safe to drink.[9][10]

Isopropyl alcohol becomes increasingly viscous with decreasing temperature and will freeze at 89 C (128 F).

Isopropyl alcohol has a maximum absorbance at 205 nm in an ultraviolet-visible spectrum.

ISOPROPYL ALCOHOL USES AND APPLICATION

Solvent

Isopropyl alcohol dissolves a wide range of non-polar compounds. It also evaporates quickly, leaves nearly zero oil traces, compared to ethanol, and is relatively non-toxic, compared to alternative solvents. Thus, it is used widely as a solvent and as a cleaning fluid, especially for dissolving oils.

Medical

Isopropyl alcohol is used as a water-drying aid for the prevention of otitis externa, better known as swimmers ear.

Early uses as an anesthetic

Although isopropyl alcohol can be used for anesthesia, its many negative attributes or drawbacks prohibit this use. Isopropyl alcohol can also be used similarly to ether as a solvent or as an anesthetic by inhaling the fumes or orally. Early uses included using the solvent as general anesthetic for small mammals and rodents by scientists and some veterinarians. However, it was soon discontinued, as many complications arose, including respiratory irritation, internal bleeding, and visual and hearing problems. In rare cases, respiratory failure leading to death in animals was observed.

Laboratory

As a biological specimen preservative, isopropyl alcohol provides a comparatively non-toxic alternative to formaldehyde and other synthetic preservatives. Isopropyl alcohol solutions of 7099% are used to preserve specimens.

Available in 160 Kgs Carboy

.MAGNESIUM SULPHATE

HS CODE 28332100

Magneisum Sulphate Powder, comprising of magnesium, sulfur and oxygen, is considered as vital for plants growth and to replenish the deficiency of magnesium or sulfur in the soil. These are widely sprayed or applied on roses, potatoes, lemon trees, tomatoes, peppers and carrots. With its high solubility in water, the magnesium sulphate powder is best for foliar feeding applications.

CAS number10034-99-8

Molecular formulaMgSO4.7H2O

Molar mass246.47 g/mol

AppearanceWhite crystalline solid

Density1.68 g/cm3

Melting point150 C

Solubility in water71 g/100 mL (20 C)

Solubility1.16 g/100 mL (18 C, ether)

Insoluble inAcetone and slightly soluble in alcohol and glycerol

CHINA CLAY

HS CODE 25070021

Kaolinite

Kaolinite is a clay mineral, with the chemical composition Al?Si?O?(OH)?. It is an important industrial mineral. It is a layered silicate mineral, with one tetrahedral sheet of silica linked through oxygen atoms to one octahedral sheet of alumina octahedra.

Luster: Pearly to dull earthy

Optical properties: Biaxial ()

Specific gravity: 2.162.68

Crystal class: Pedial (1); (same H-M symbol)

Crystal system: Triclinic

USES

Kaolin, also called china clay, soft white clay that is an essential ingredient in the manufacture of china and porcelain and is widely used in the making of paper, rubber, paint, and many other products.

BLEACHING POWDER

hs code 28281010

We are one of the suppliers and exporters of Bleaching Powder. The superior quality ingredients are procured from the authentic vendors of the market to formulate these chemicals as per the set industry standards and norms. Owing to their safe packaging and effectiveness, these chemicals are widely demanded by the clients.

Features of the product are as follows:

Unique composition

Purity

Longer shelf life

SBP contains 34-36 per cent of available chlorine. It reports very low loss of available chlorine over an extended period of time and even during changing climatic conditions. This is mainly because of the low moisture content of the final product and absence of heavy metal impurities in the raw material.

Our Tradding SBP is free flowing, soluble in cold water, and the preferred choice among consumers.

Applications

Disinfectant in the treatment of potable water

Bleaching agent in textile industry

Sanitiser during epidemic control

Aqua culture

Carpet and the pulp and paper industry

Hospitals, health departments, hotels, offices, homes

Swimming pool

Laundry, sugar mills, sewage disposal and sodium silicate industry

.HYDROCHLORIC ACID

HS Code: 28061000

Molecular Formula: HCl

Description

Hydrochloric acid is a colorless inorganic chemical system with the formula HCl. Hydrochloric acid has a distinctive pungent smell. It is mainly produced as a precursor to vinyl chloride for PVC. It is classified as strongly acidic and can attack the skin over a wide composition range, since the hydrogen chloride practically dissociates completely in solution

Hydrochloric acid is the simplest chlorine-based acid system containing water. It is a solution of hydrogen chloride and water, and a variety of other chemical species, including hydronium and chloride ions. It is an important chemical reagent and industrial chemical, used primarily in the production of polyvinyl chloride for plastic. In households, diluted hydrochloric acid is often used as a descaling agent. In the food industry, hydrochloric acid is used as a food additive and in the production of gelatin. Hydrochloric acid is also used in leather processing.

Chemical properties

HCl is a strong, monoprotic acid, which means it can release only one H+ ion (proton).

Being a strong acid, it gets completely dissociated in water to give the hydronium and chloride ions. It readily reacts with bases to form chloride salts.

Concentrated HCl dissolves many metals and forms oxidized metal chlorides and hydrogen gas.

Dilute HCl can break down or digest many chemical and biological samples.

Uses

Hydrochloric acid has many industrial uses, such as in the production of various chlorides, plastics (such as PVC and polyurethane), fertilizerand dyes.

It is also used in the photographic, textile, and rubber industries, as well as in gelatin production, leather processing and household cleaning products.

Available in 40Kgs Can and Tanker Load

CAUSTIC POTASH FLAKES (KOH)

Potassium Hydroxide

HS Code 28152000

Potassium hydroxide is an inorganic compound with the formula KOH, and is commonly called caustic potash. Along with sodium hydroxide, KOH is a prototypical strong base. It has many industrial and niche applications, most of which exploit its caustic nature and its reactivity toward acids.

Formula: KOH

Molar mass: 56.1056 g/mol

IUPAC ID : Potassium hydroxide

Density : 2.12 g/cm

Melting point: 360 C

Boiling point : 1, 327 C

Soluble in: Water, Alcohol, Glycerol

ADVANTAGES

PC guarantees minimum 90% purity of KOH

Caustic Potash Flakes is stable even at

High Temperatures.

QCD is equipped with most modern instruments to analyze special test on request.

Features :

White flaky substance

Free from mercury

Low iron content

High thermal stability

Dissolves in water at room temperature

Soluble in methanol, ethanol and propanol

Absorbs wat

USES

Potassium Carbonate manufacture Dye Stuff industry

Rubber Chemicals

Potassium Permanganate Manufacture

Acid Neutralization

Other Potassium based chemicals

Pharmaceuticals

Food products

Liquid fertilizers

Potassium compounds

Packaging :

50 Kg. HDPE bags for domestic supplies

.SODIUM NITRATE

HS Code: 31025000

Chemical Formula: NaNO3

Sodium nitrate is the chemical compound with the formula NaNO ?. This alkali metal nitrate salt is also known as Chile saltpeter to distinguish it from ordinary saltpeter, potassium nitrate. The mineral form is also known as nitratine, nitratite or soda niter.

Formula: NaNO3

IUPAC ID: Sodium nitrate

Molar mass: 84.9947 g/mol

Melting point: 308 C

Density: 2.26 g/cm

Boiling point: 380 C

Sodium nitrate is a white solid very soluble in water. It is a readily available source of the nitrate anion (NO3), which is useful in several reactions carried out on industrial scales for the production of fertilizers, pyrotechnics glass and pottery enamels, food preservatives (esp. meats), and solid rocket propellant. It has been mined extensively for these purposes.

USES

Metal Treastment Chemical Manufacturers

Phosphating Chemical Manufacturer

Pharmaceuticals Manufacturer

Glass Industries

Explosive Industries

Fertilizer Chemical Manufacturer

NC Industrial Thinner we specialize in offering industrial thinners, which meet the requirements of our clientele. These thinners are acknowledged for the features like purity, durability, precise ph value and accurate composition. Available in various these are customized according to the clients specific requirements. Our company also ensures that the products are in complaint with the industry standards and have applications in various industries

.caustic soda lye 47 to 48%

( sodium hydroxide solution )

hsn code : 28151200

exclusive features : mercury free low iron content

advantages

our materials guarantees 47% purity of naoh for c.s. lye for gradei, and 30% purity of naoh for c.s. lye for gradeii and caustic soda flakes minimum 99.50% purity of naoh for c.s. flakes (dry basis)

applications

acid neutralization

aluminum products

dyes & pharmaceuticals

extraction of petroleum products

extraction of zinc

processing of vegetable oils

pulp & paper

rayon

regeneration of water treatment resigns

rubber chemicals

soap industries

sodium salts

packing

c.s. lye in tanker load as well as 50 kg hdpe can

CALCITE POWDER

HS CODE 25309030

we offer calcite powder, white washing powder, calcite crystal, calcite grit, calcite granules and micronized calcite.

Calcite Powder Use in Plastic: Calcite mineral widely used as mineral fillers in order to obtain high humidity retention, to improve the consistency and dryness of the final mass. These polymers have various applications like in bags, pipes, automotive parts, furniture, containers if etc

feldspar

hs code 25291020

feldspar is an abundant rock-forming mineral which usually ranges from off-white, or pink to pale-coloured. it is known as a natural source of potassium oxide (k2o), sodium oxide (na2o) and aluminium oxide (al2o3)

feldspar comprises a group of minerals containing potassium, sodium, calcium & aluminium silicates. it is a universal flux used in all types of ceramic bodies &glaze. feldspars are primarily used in industrial application for their alumina & alkli content. we supply both high quality sodium & potassium feldspar as per client requirement . the glass & ceramic industries are the major consumers of feldspar. available in chips & powder form.

feldsper lumps/ chips in 2-5 mm and larger sizes :

potash feldsper (pink) : 12.5%(k2o), 2%(na2o), 0.15%(fe2o3)

soda feldspar (white) : 9.5%(k2o), 1.5%(na2o), 0.15%(fe2o3)

against order we are supplying the following grade

potash feldspar lumps

potash feldspar powder

soda feldspar lumps

soda feldspar powder

CALCIUM CHLORIDE ANHYDROUS POWDER

CALCIUM CHLORIDE POWDER

HS CODE NO 28272000

Product Specification

Purity 90 to 95%

Chemical Formula CACL2

CAS Number 10043-52-4

Physical State/Form Powder Anhydrous

Product Groups Inorganic Solids, Inorganic Inter

Specific Gravity 1.3

Density 2.15 g/cm3

Melting Point 772 Degree C

Boiling Point 1, 935 Degree C

Appearance White Powder

Molar mass 110.98 g/mol

Compound Formula CaCl2

Minimum Order 50 Kg

Product Description

Available in form of white crystalline powder or granular form, Calcium Chloride offered finds use as main ingredient in different ready to eat food items. Available under formula CaCl2, molar mass of 110.98 g/mol, melting point of 772 C, density of 2.15 g/cm and boiling point of 1, 935 C, it is salt of calcium & chlorine and finds use in brine for refrigeration plants, desiccation and other applications. Being soluble in water, it also serves as calcium ion source in aqueous solution.

Calcium chloride is used as road salt for melting snow, a drying agent in desiccators, for dehydrating organic liquids and gases, in oil and gas drilling, as a dust-proofing agent, food additives, concrete hardening accelerator, Construction, Chemical Manufacturing if etc.,

Additional Information

Delivery Time Immediate

Packaging Details Available in 40/50 Kg HDPE bag with inner Plastic liner

.CALCIUM CHLORIDE FUSED

HSN Code 28272000

Calcium chloride is an inorganic compound, a salt with the chemical formula CaCl?. It is a white coloured crystalline solid at room temperature, and it is highly soluble in water. It can be created by neutralising hydrochloric acid with calcium hydroxide.

Molar mass : 110.98 g/mol

Formula : CaCl2

IUPAC ID : Calcium chloride

Boiling point : 1, 935 C

Melting point : 772 C

Soluble in : Water, Acetic acid, Alcohol, Acetone

Calcium Chloride Fused Lumps that are widely used in cement manufacturing, concrete additive and oil drilling wells, bitumen industries, iceing industries if etc

Product Features:

Purity

Correct formulation

Effectiveness

Long shelf life

APPLICATIONS

Calcium chloride is a versatile product providing unique contributions in widely varying applications:-

Agriculture: Post-Harvest

Agriculture: Pre-Harvest

Brining

Concrete Acceleration

Drilling Fluid Additive

Food Processing

Hydrocarbon Dehydration

Ice Melting: Road & Highway

Ice Melting: Sidewalks

Industrial

Refrigeration

Roads: Dust Control

Roads: Base Stabilization

Roads: Full-Depth Reclamation

Tire Weighting

Water Treatment

.Tri Sodium Phosphate

HS Code:28353100

Chemical Formula:Na3PO4

Description

Trisodium phosphate (TSP) is the inorganic compound with the chemical formula Na3PO4. It is a white, granular or crystalline solid, highly soluble in water, producing an alkaline solution. TSP is used as a cleaning agent, builder, lubricant, food additive, stain remover, and degreaser.

The item of commerce is often partially hydrated and may range from anhydrous Na3PO4 to the dodecahydrate Na3PO4 12H2O. Most often found in white powder form, it can also be called trisodium orthophosphate or simply sodium phosphate.

Properties

Formula: Na3PO4

Molar mass: 163.94 g/mol

Gibbs free energy (fG): -1819 kJ/mol (anhydrous)

Basicity (pKb): 2.23

Heat capacity (C): 665 J/molK (dodecahydrate)

GHS hazard statements: H315, H318, H335

Uses

Trisodium phosphate was at one time extensively used in formulations for a variety of consumer-grade soaps and detergents, and the most common use for trisodium phosphate has been in cleaning agents. The pH of a 1% solution is 12 (i.e., very basic), and the solution is sufficiently alkaline to saponify grease and oils. In combination with surfactants, TSP is an excellent agent for cleaning everything from laundry to concrete driveways.

TSP is commonly used after cleaning a surface with mineral spirits to remove hydrocarbon residues and may be used with household chlorine bleach in the same solution without hazardous reactions.[citation needed] This mixture is particularly effective for removing mildew, but is less effective at removing mold.[citation needed]

Although it is still the active ingredient in some toilet bowl-cleaning tablets, TSP is generally not recommended for cleaning bathrooms because it can stain metal fixtures and can damage grout.

YELLOW OXIDE

HS Code:28211010

Chemical Formula:FeO(OH)

Description

Yellow oxide is one kind of oxides with stable chemical properties. Iron oxide yellow is widely used in painting, scagliola and concrete due to its bright and pure color, good weather proof and high opacity, also can be used as colorant for ink, rubber, paper and so on.

Properties

Color: Yellow

Density (g/cm3): 0.2 to 0.7

Physical State: Solid, fine amorphous powder

Solubility in Water: Slightly

Boiling Point (C): Not applicable

Flash Point: Not flammable

Specific Gravity: 4.1 to 4.3

pH Value: Neutral

Odor: Odorless

Uses

Yellow iron oxide (CAS 51274-00-1) is used as a pigment, e.g. Pigment Yellow 42 or C.I. 77492. Pigment Yellow 42 is Food and Drug Administration (FDA) approved for use in cosmetics and is used in some tattoo inks. Solid material color ranges from yellow through dark-brown to black. Iron oxide-hydroxide is also used in aquarium water treatment as a phosphate binder.Recently, two forms of Iron oxide-hydroxides nanoparticles were identified as very good adsorbents for lead removal from aquatic media.

AOS LIQUID

AOS PASTE

AOS POWDER

Alpha Olefin Sulphonates - AOS

HS CODE 34021190

we are dealing AOS Liquid, AOS Phaste international accepting brand.

Packaging Size 50/300 Kgs

Brand Godrej

Grade Industrial

Packaging Form Barrel

Packaging Type HDPE Barrel

Is It Organic Organic

Minimum Order Quantity 50 Kg

SODIUM META BISULPHITE

HS CODE NO28321010

We offer pure and active Sodium Meta Bi Sulfite. This is an inorganic compound having chemical formula Na2S2O5. We offer chemicals as specified by our clients. Having a CAS no. of 7681-57-4 and molecular weight 190.11.

Physical and Chemical Properties:

Appearance:Fine, white granular material

Odor : Pungent sulphur di oxide odor

pH: 4.3 (1% solution)

Specific gravity: 1.48 (@20 C).

Solubility: 39% in water (Weight, @16 C)

Other Properties:

It is highly hygroscopic product.keep it preserved in container/bag properly.

Keep it away from heat, light, moisture etc.

Application:

Bleaching agent (e.g. candies, cake) loose agent (e.g. bread, cracker, etc).

Antiseptic and germicide (e.g. fruit juice, tinned food, etc).

Inhibitor and freshening agent (e.g. day lily, seafood, fruit and vegetable, etc).

Available in 50/25 kg bag

CYCLO-HEXANE

HS CODE 29021100

Cyclohexane is a cycloalkane with the molecular formula C?H??. Cyclohexane is non-polar. Cyclohexane is a colorless, flammable liquid with a distinctive detergent-like odor, reminiscent of cleaning products.

Formula: C6H12

Boiling point: 80.75 C

Density: 779 kg/m

Molar mass: 84.16 g/mol

Exporter, Importer, Manufacturer, Distributor, Wholesaler and Supplier of Cyclohexane Cyclohexane is a cycloalkane with the molecular formula C6H12. Cyclohexane is non-polar. Cyclohexane is a colorless, flammable liquid with a distinctive detergent-like odor, reminiscent of cleaning products (in which it is sometimes used). Cyclohexane is mainly used for the industrial production of adipic acid and caprolactam, which are precursors to nylon.

Most cyclohexane goes into the production of intermediates for nylon, which has a variety of common applications such as clothing, tents and carpets as well as thermoplastics. Cyclohexane is also used as a solvent in chemical and industrial processes and recently has been substituted for benzene in many applications.

MORPHOLINE

HS CODE 29349920

Supplier of Morpholine. Our product range also comprises of Acrylamide, Acrylic Acid and Alkyl Ketene Dimer Wax.

Morpholine

Clients can avail from us a chemical known as Morpholine, which is widely used in various industries like pharmaceutical, textile, and agricultural. This chemical is acclaimed by our clients for its longer shelf life, precise pH value and accurate composition.

Available in 200 Kgs Drum

.PHOSPHORIC ACID TGECHNICAL GRADE

HS Code : 28092010

We provide pure phosphoric acid that is synthesized using quality raw material. It is available in colorless, transparent as well as in light colored thick liquid. Phosphoric acid is used in various industries including medical and food. Further, owing to the high quality standards, these acids are using in food, agriculture and chemical industries. Some of the chemical specifications of Phosphoric Acid are as follows:

Appearance: transparent colorless fluid

Content: 85% mm

Chloride: 0.0005% max

Sulphate: 0.005% max

Heavy metal: 0.001% max

Arsenic: 0.005% max

Iron: 0.002% max

Acetic acid: 2% max

Uses

Food-grade phosphoric acid (additive E338[13]) is used to acidify foods and beverages such as various colas and jams. It provides a tangy or sour taste.

In anti-rust treatment by phosphate conversion coating

In phosphoric acid fuel cells.

In activated carbon production.

In microfabrication to etch silicon nitride selectively with respect to silicon dioxide.

As a pH adjuster in cosmetics and skin-care products.

As a sanitizing agent in the dairy, food, and brewing industries.

SULPHURIC ACID

HS Code: 28070010

Description

Sulfuric acid (alternative spelling sulphuric acid), also known as vitriol, is a mineral acid composed of the elements sulfur, oxygen and hydrogen, with molecular formula H2SO4. It is a colorless, odorless, and syrupy liquid that is soluble in water, in a reaction that is highly exothermic.

Its corrosiveness can be mainly ascribed to its strong acidic nature, and, if at a high concentration, its dehydrating and oxidizing properties. It is also hygroscopic, readily absorbing water vapor from the air.Upon contact, sulfuric acid can cause severe chemical burns and even secondary thermal burns; it is very dangerous even at moderate concentrations.

Properties

Chemical formula: H2SO4

Molar mass: 98.079 g/mol

Appearance: Clear, colorless liquid

Odor: odorless

Density: 1.8302 g/cm3, liquid

Melting point: 10.31C (50.56 F; 283.46 K)

Boiling point 337C (639 F; 610 K) When sulfuric acid is above 300 C (572 F), it will decompose slowly

Solubility in water: miscible, exothermic

Vapor pressure: 0.001 mmHg (20 C)

Acidity (pKa): 3, 1.99

Conjugate base: Hydrogen sulfate

Viscosity: 6.7 cP (20 C)

Uses

Sulphuric Acid is used in chemical industry for production of detergents, synthetic resins, dyestuffs, pharmaceuticals, petroleum catalysts, insecticides and antifreeze, as well as in various processes such as oil well acidicizing, aluminium reduction, paper sizing, water treatment. About 6% of uses are related to pigments and include paints, enamels, printing inks, coated fabrics and paper, and the rest is dispersed into a multitude of applications such as production of explosives, cellophane, acetate and viscose textiles, lubricants, non-ferrous metals, and batteries.

Industrial cleaning agent

Sulfuric acid is used in large quantities by the iron and steelmaking industry to remove oxidation, rust, and scaling from rolled sheet and billets prior to sale to the automobile and major appliances industry.[citation needed] Used acid is often recycled using a spent acid regeneration (SAR) plant. These plants combust spent acid[clarification needed] with natural gas, refinery gas, fuel oil or other fuel sources. This combustion process produces gaseous sulfur dioxide (SO2) and sulfur trioxide (SO3) which are then used to manufacture "new" sulfuric acid. SAR plants are common additions to metal smelting plants, oil refineries, and other industries where sulfuric acid is consumed in bulk, as operating a SAR plant is much cheaper than the recurring costs of spent acid disposal and new acid purchases.

Hydrogen peroxide (H2O2) can be added to sulfuric acid to produce piranha solution, a powerful but very toxic cleaning solution with which substrate surfaces can be cleaned. Piranha solution is typically used in the microelectronics industry, and also in laboratory settings to clean glassware.

HYDROGEN PEROXIDE
HS CODE NO 28470000

Hydrogen peroxide is a chemical compound with the formula H 2O 2. It is the simplest peroxide and in its pure form is a colorless liquid, slightly more viscous than water.Formula: 2(HO)Density: 1.45 g/cmMolar mass: 34.0147 g/molBoiling point: 150.2 CIUPAC ID: dihydrogen dioxideMelting point: -0.43 C

Basic Info.Quality:First ClassClassification:Hydrogen PeroxideGrade Standard:Industrial GradeBleaching:OxidingExport Markets:Global

Packing:IBC Drum, 30/35kg Drum, ISO TankStandard:60%, 50%, 35%, 27.5%Application: H2O2 is a strong and environmental friendly oxidizer. It is used to bleach textile and paper products, manufacturer or process foodstuffs, minerals, petrochemicals and consumer products (detergent). Also used for industrial waste treatment(detoxification).

Specific Hazards: H2O2 is a strong oxidizer and will not burn, but its decomposition liberate oxygen which supports combustion. Contacts with organical substances or some impurities, reducing agent or combustible materials, H2O2 will decompose rapidly which may cause explosion. Corrosive, cause burns to skin, eyes, and respiratory tract, Harmful if swallowed or inhaled.

Extinguishing media: A Large amount of water

Storage & handling: Store the product in a ventilated and cool place, prevent from direct sunshine, heat and combustible substances. If the package is damaged and there's any spill, use large quantities of water to flush it. Do not store the product on wood pallets or wood floors.

HYDROCHLORIC ACID

HS Code: 28061000

Molecular Formula: HCl

Other Names: Hydronium chloride, Chlorhydric Acid

Description

• Hydrochloric acid is a colorless inorganic chemical system with the formula HCl. Hydrochloric acid has a distinctive pungent smell. It is mainly produced as a precursor to vinyl chloride for PVC. It is classified as strongly acidic and can attack the skin over a wide composition range, since the hydrogen chloride practically dissociates completely in solution
• Hydrochloric acid is the simplest chlorine-based acid system containing water. It is a solution of hydrogen chloride and water, and a variety of other chemical species, including hydronium and chloride ions. It is an important chemical reagent and industrial chemical, used primarily in the production of polyvinyl chloride for plastic. In households, diluted hydrochloric acid is often used as a descaling agent. In the food industry, hydrochloric acid is used as a food additive and in the production of gelatin. Hydrochloric acid is also used in leather processing.

Chemical properties

• HCl is a strong, monoprotic acid, which means it can release only one H+ ion (proton).
• Being a strong acid, it gets completely dissociated in water to give the hydronium and chloride ions. It readily reacts with bases to form chloride salts.
• Concentrated HCl dissolves many metals and forms oxidized metal chlorides and hydrogen gas.
• Dilute HCl can break down or digest many chemical and biological samples.

Uses

• Hydrochloric acid has many industrial uses, such as in the production of various chlorides, plastics (such as PVC and polyurethane), fertilizerand dyes.
• It is also used in the photographic, textile, and rubber industries, as well as in gelatin production, leather processing and household cleaning products.
• Available in 40Kgs Can and Tanker Load

FERROUS SULPHATE

HS CODE 28332910

Ferrous is a necessary micronutrient required in protein synthesis and for ensuring seed quality and uniform maturity. Ferrous deficiency is common high pH, calcareous and low organic atter content soils. To rectify the deficiency and as a nutrient we provide the product in various physical forms and purity as per the application.

CAS NO. 7782-63-0

Common name Ferrous Sulphate

mono 30%

Molecular Formula FeSO, .H, O

Molecular weight 170.01

Apperance Light Greenish White Powder

% of Iron (Fe) MIN 30 %

CAS NO 7720-78-7

Common name Ferrous Sulphate

Hepta(Crystal)

Molecular formula FeSO, .7H, O

Molecular weight 278.01

Appearance Greenish Crystalline

% of Iron (Fe) MIN 19

Ferrous sulfate is the chemical compound with the formula FeSO4. Known since ancient times as copperas and as green vitriol, the blue-green heptahydrate is the most common form of this material. All iron sulfates dissolve in water to give the same aquo complex [Fe(H2O)6]2+, which has octahedral molecular geometry and paramagnetic.

Available in 25/50 Kgf Bagf

Features:

Purity

Efficacy

Non-toxic chemicals

Clinically approved