We provide environmental monitoring services for ambient air quality monitoring and indoor air quality monitoring. It is systematic assessment of pollutants , gases, dust particles from air.rnrnWe are providing these services for our clients for 8/24 hrs.rnrnWe have highly qualified and experienced staff to carry out these services.

Professionals work in close coordination and provide best Environmental Impact Assessment Services. This assessment service is much satisfying and quickly completed by diligent professionals in easier way. We make proper strategies for completion of work.

We are a trusted and verified company offering various Industrial Indoor Air Quality Monitoring, validations and testing services for clean room facility. Our full range of testing and measurement instrumentation, we Perfect Pollucon Services conduct several tests as stipulated in the "Guidelines for Good IAQ in Office Premises" as written by ENV (Ministry of Environment). These tests are conducted as per defined guidelines and certification is provided on compliance to desired standards. Some of the tests are: Measurement of Physical Parameter Relative HumidityRespirable Airborne ParticlesTemperatureAirflow VelocityVolumeAir-change rate Measurement of Chemical Parameters Carbon MonoxideOzoneCarbon DioxideVolatile Organic Compounds (VOC)Formaldehyde Measurement of Biological Parameters Total Fungal CountTotal Bacteria Count In line with all our other testing and certification services, we submit a comprehensive and detailed report of all the findings and well as with recommendations), after completion of the tests and measurements. We Perfect Pollucon Services pride on our reporting format and we set the standards for excellence.

We provide Services in Noise Level Monitoring. Noise is measured from dB meter. It can be measured for One instance or for 24 hrs with data logger meter.rnrn There are two types of Noilse level monitoringrnrn1)Ambient Noise level monitoringrn2) inplant Noise level monitoringrnrnwe have highly trained and highly experienced professionals. We have periodically calibrated instruments which gives you accurate reading with analysis report.

Ambient air Monitoring Air quality monitoring involves the measurement of pollution in ambient conditions. Monitoring the air quality is important in protecting the health of populations and is performed by Ambient Air Quality Monitoring Stations (AAQMS) that are totally integrated with gas analyzers, particulate monitors, calibration equipment, data loggers and data reporting software. Perfect Pollucon services provide a totally integrated air quality monitoring system or network of systems for all its worldwide clients. Perfect Pollucon Services supply sophisticated integrated systems that combine a variety of environmental monitoring instruments into a single monitoring system. Features:ConvenientCost effectiveHighly Qualified and Experienced staffAccurately Calibrated Instruments Open air, in which humans and other organisms live and breathe, is defined as 'Ambient Air'. Its content and quality are directly affected by the day-to-day activities of humans, industry and so on. In turn, ambient air quality has a direct effect on both public health and the welfare of the ecosystems. Ambient Air Monitoring is the systematic, long-term assessment of pollutant levels by measuring the quantity and types of certain pollutants in the surrounding, outdoor air. Air quality monitoring is carried out to assess the extent of pollution, ensure compliance with national legislation, evaluate control options, and provide data for air quality modeling. The locations for monitoring stations depend on the purpose of the monitoring.

Experts work together and use best machines for offering Air Pollution Monitoring Services. In addition to this, these presented monitoring services are satisfying and available for patrons in simple way. We apply minimal cost for this pollution monitoring work. Air Pollution Monitoring For air monitoring applications, Perfect Pollucon Services can supply everything from a single gas or dust analyzer through to an entire air pollution monitoring network. As a world-renowned systems integrator, Perfect Pollucon Services can provide clients with a range of standard or bespoke monitoring systems from roadside enclosures through to larger "walk-in" cabins and even trailer and vehicle based mobile laboratories. Real-time gas analyzers are available for the measurement of all major organic and inorganic pollutants including Oxides of Nitrogen (NOx), Sulphur Dioxide (SO2), Ozone (O3), Carbon Monoxide (CO), Ammonia (NH3), Benzene (C6H6), BTEX and VOC's. In addition to air monitors, Perfect Pollucon Services supplies a wide range of continuous real-time dust monitors and gravimetric samplers. Add in advanced calibration systems, data-logging, internet data distribution and service contracts and it soon becomes clear that Perfect Pollucon Services is the only company you need to talk to for your Air Pollution Monitoring Solutions.

Being one of the leading names in industry, we are involved in providing Environmental Services to the clients. These services are handles and executed by the industry experts, who have vast industry experience and vast knowledge in their respective fields. Apart from this, we make use of sophisticated tools in handling these services to ensure safe and healthy environment. For our regular and esteemed clients, these services are available at most reasonable rates. Features: Cost effectiveTrustworthyEffective Perfect Pollucon Services is a recognized provider of environmental services with the highest quality. It is a recognized lab and consultancy organization from ministry of environment and forests and various state pollution control boards. We offer specialized services like Environmental Impact Assessment (EIA) studies, Environment Management Plan, Solid Waste Management, Effluent Treatment Plants Operation & Maintenance, Clean Development Mechanism (CDM) i.e CarbonTrading, Green Buildings, Waste ManagementEnvironment MonitoringEnvironmental AuditingRain Water Harvesting (RWH), Air, Soil, Water TestingIndoor Air Quality (IAQ)

Being the leading service provider of environment services, we offer testing, sampling and a comprehensive range of specialist solutions to help you minimize your environmental impact.We can help you with every aspect of your environmental responsibilities.Ambient air quality (aaq) work zone air qualitythe air samples are collected and analyzed as per national ambient air quality standards (naaqs) or other relevant standards as per requirements in our air testing services. Some of the parameters analyzed in it are listed below.Nox, sox, co, hc, pm10, pm2.5, nh3benzenebenzo (a) pyreneozoneheavy metalsmetrological data (temperature, relative humidity, rain fall, solar radiation, wind speed, wind direction & traffic density etc.)noise, lux and ventilation measurementshydrogen sulphideoxygencarbon dioxide and formaldehydevoc, svoc (pah, pcb) we offer ambient air quality monitoring services in air testing services.Indoor air quality (iaq)we perform quantitative assessment for indoor environment quality as per ashrae osha niosh leed green building standards:nox, sox, co, hc, pm10, pm2.5, nh3oxygentvocformaldehydemicrobial contaminationthermal comfortventilation rateco2we also offer indoor air quality testing services.Stationary source emissionemission measurement is a complex process undertaken in often difficult environments. Our team is well versed with wide range of methods and also well equipped to provide reliable measurements accurately as per the is: 11255 and other standards.

What is Stack Monitoring. A stack test is a procedure for sampling a gas stream from a single sampling location at a facility, unit, or pollution control equipment. It is used to determine a pollutant emission rate, concentration, or parameter while the facility, unit, or pollution control equipment is operating at conditions that result in the measurement of the highest emission or parameter values (prior to any control device) or at other operating conditions approved by the regulatory authority. A test is comprised of three (3) sampling runs for a specified sampling time span. Additional conditions may be required by applicable rules, permit, or enforcement order. The Monitoring is performed using sampling and analytical procedures approved by the pollution control board for the specific pollutant or parameter and facility, unit, pollution control equipment, process, or operation. A Stack Tests is also known as an "Emission Test", "Source Sampling Test", "Compliance Test", or "Performance Test". Fugitive Emissions Measurement Services Our company specializes in the service provide of Fugitive Emissions Measurement Services. These services are renowned for their quality and our experts monitor the overall project right from start up to ensure that these are executed without any flaw. In addition to this, these services have increased the quality of these emissions and decreased the quantity of hazardous matter from them. Finally, call centers have been set up across the globe to answer customer queries. Features: Conform to the prevalent industry patterns Excellent service Thorough research

Emission testing servicesemission testing services includes sampling and analysis of emissions from dg sets, boiler and industrial processes. Sampling in stackschimneys is carried out at appropriate location (height) and measurement of velocity and flow rate. Samples of different gases and particulates are collected after measurement of velocity and flow rate in the stack. The sample collection is done using pre-calibrated stack monitoring kits.We perfect pollucon services offer services in emission testing services in india.

Fugitive Emissions Measurement Services or stack monitoring or stack emission monitoring services offered by Perfect Pollucon Services. We specialize in the service provider of Fugitive Emissions Measurement Services. These services are renowned for their quality and our experts monitor the overall project right from start up to ensure that these are executed without any flaw. In addition to this, these services have increased the quality of these emissions and decreased the quantity of hazardous matter from them. Finally, call centers have been set up across the globe to answer customer queries. Features:Conform to the prevalent industry patternsExcellent serviceThorough research Stack Emissions Measurement ServicesPerfect Pollucon Services is the foremost service provider of Stack Emissions Measurement Services which are certified and accredited by the leading bodies and are completed under the supervision of our experts. The experts have done thorough research on this topic and have developed a sketch to effectively deliver these services to our clients. In addition to this, these services have gained popularity among our clients for their reliability and efficiency. Features:247 serviceAccurateEffectiveStack Monitoring Stack emission measurement services include NOx, N2O, CO, CO2, O2, SO2 and CxHy emissions. Stack emission concentrations through standardized measurement techniques. Intertek measures stationary stack gas emissions of production and combustion processes. Stack emissions Monitoring measures:To determine if emission permit requirements are met or exceededFor emissions permit renewalFor process control purposesFor emissions trading purposes (CO2, NOx)We offer Stack monitoring for our clients in competative prices.

Experts work in close coordination and offer Stack Air Pollution Monitoring Services. These monitoring services are reliable and accessible from us for commercial place to be abided by government rules and regulation. Our Stack Air Pollution monitoring team offers sample collection and analysis from industrial discharge stacks using isokinetic sampling trains. We can test for wide range of parameters, including, but not limited to, Total Suspended Particulates (TSP), PM10 and PM2.5, metals, fluoride, volatile organic compounds (VOC) and sulfur and nitrogen compounds. We operate to the highest standards of quality and health and safety and the monitoring.We can offer our customers a specific package of services tailored to their needs. Alternatively, we can supply a full service which includes scheduling, monitoring, analysis, reporting and interpretive advice.Features of Stack Air Pollution monitoring Sample and velocity traverses from stationary sources.Stack gas velocity and volumetric flow rates.Gas analysis for determination of dry molecular weight.Moisture content in stationary sources.Particulate emissions from stationary sources.Sulfuric acid mist and sulfur dioxide emissions from stationary sources.Sampling of aldehydes and ketones from stationary sources.Determination of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans from stationary sources.Determination of hydrogen halides and halogen emissions from stationary sources.Determination of metal emissions from stationary sources.Collection and analysis of ammonia from stationary sources.Determination of PM10 emissions (constant sampling rate procedure).Measurement of gaseous organic compound emissions (VOCs).Services provided in stack Air Pollution monitoring include:Site assessment including a health and safety assessment of sampling sites.

Being one of the distinguished enterprises, we are immersed in offering highly reliable ETP Upgradation Services to meet the detailed demands of our customers. Provided services are imparted by adroit workers in compilation with the clients budget and time desires. Broadly cherished due to their on-time execution, these services could be acquired from us in a number of altered forms. Banking on the understanding our personnel have received in the years, we are engrossed in the business of offering STP Upgradation Service to our clients. Credited and valued due to their reasonable rates, these services are widely praised and appreciated amongst our clients. More to this, our adroit workers are rendering these services in the most planned manner.

O&M of Water Treatment Plants offeredinvolves effective management of plant operation and maintenance process so as to ensure their delivering efficient treatment process support as demanded by customers in particular processes. Further, the team also ensures proper maintenance level is maintained for all involved plant components so as to achieve optimized working efficiency of the entire system. Some of the aspects looked into by us here include plants provide for reduced operation costs in ETP STP Operation and Maintenance., they meet the effective compliance guidelines, water purification system provides for energy-saving operations while removing over 99% ions, working standards of the plants are maintained as per the guidelines of different fields like food, beverage purification, pharmacy, textile, chemical and other areas. Reduce your operating costs and thus increase profits.Achieve more effective compliance with legislation.Improve your company's public image.

We are offering MPCB ConsentMPCB consent is issued by Maharashtra Pollution Control Board for operating business. Consent terms and condition include pollution level, environmental effort required by organization to operate business. Any industry, operation or process or an extension and addition thereto, which is likely to discharge sewerage or trade effluent into the environment or likely to emit any air pollution into the atmosphere will have to obtain consent of the State Pollution Control Board under the provisions of Water (P & CP) Act, 1974 and Air (P & CP) Act, 1981.There are three types of consent issued under the provisions of Water (P & CP) Act 1974 and Air (P & CP) Act, 1981.

We are offering MPCB Consent to Establish (C2E): All the industries and activities needing consent must obtain consent to establish before actual commencement of the works for establishing the industryactivity. 1. Preparation of Application 2. Classification of Industry (Red Orange Green) 3. Analysis of the Case 4. Filing of Case with MPCB 5. Obtain Consent to Establishment

We are offering MPCB Consent to Operate (C2O): This consent needs to be taken before actual commencement of production including trial production. This consent is valid for certain duration which needs to be renewed. 1. Preparation of Application 2. Evaluate existing Consent to Establish 3. Analysis of the Case 4. Filing of Case with MPCB 5. Obtain Consent to Operate

We are offering MPCB Renewal of Consent to Operate (RC2O): The consent to operate has to be renewed after certain period. 1. Preparation of Application 2. Evaluate existing Consent to Operate 3. Analysis of the Case 4. Filing of Case with MPCB 5. Obtain Renewed Consent to Operate

MPCB consent is issued by Maharastra Pollution Control Board for operating business. Consent terms and condition include pollution level, environmental effort required by organization to operate business. This is very important licence issue by government.Failure to not having licence can directly lead to lockoutsealing by the Government authority and heavy penalties and imprisonment. Maharastra Pollution Control Board(mpcb) Consent For Thane & Mumbai Dist In Maharastra. Pay Mode Terms: LC (Letter of Credit), DA (Documents Against Acceptance), DP (Documents Against Payment), TT (Bank Transfer), Western UnionMinimum Order Quantity: 01 Piece

O&M of Effluent Treatment Plant services offeredare handled by experienced industry professionals who ensure optimum plant operation and maintenance standards are maintained at all levels. Working on well defined approach, the team also ensures that effluent treatment plants provide for effective support in BOD reduction, aeration, clarification among others. Some of the work areas we look into include plant functioning is maintained as per effluent treatment requirements, plants provide for effective removal of BOD5, COD and other contaminants, provide for stable, effective and economical performance, water after treatment meet defined emission standards, provide for improved water solubility of oxygen, provide for reliable performance, offer suitable treatment support for domestic, industrial & commercial sewage and related organic sewage among others.

We are deeply involved in offering best ETP Designing Service. Experts utilize proper space of consumers and offer best plant designing service. Besides this, these presented plant designing services are much satisfying. Supported by highly accomplished crew of employees, we are rendering STP Designing Service. These provided services are delivered under the stern supervision of adroit personnel as per set industry principles. In addition to this, these provided services are attributed amid our client for reliability and cost effectiveness.

Industrial Waste water Treatment involves tasks like removal of harmful chemicals and substances from waste water before releasing into environment or reuse. it objective to create less harmful or treated water or sludge before releasing to environment. We provide reports after testing treated or untreated waste water for following parameters: pH, Suspended Solids, COD, Total Dissolved Solids, Total Ammonical Nitrogen, BOD 3 Days, 27 0C, Oil & Grease, Chloride as Cl, Sulphate as SO4, Cyanide, Fluoride, Lead as pb, Mercury as Hg, Nickel as Ni, Zinc as Zn, Hexavalent Chromium Cr+6, Total Metal etc. We also provide services in Operation and Maintainance of ETP (Effluent treatment plant) or STP (sewage treatement Plant).