Cast iron wheels with either V-groove (VG), Square groove (SQG), or a Flange (FLG) are available depending upon the track over which the castors has to move. Since the wheels roll over steel track, the pushing or pulling force required is much less, reduces labour fatigue. Floor surface also does not get damage at any time.
Hardness of Casting : ( 175 10 ) BHN
Grade of Casting : FG200 as per IS-210
Maximum Working Temperature : 250C

These are bare cast iron wheels made from good quality graded casting, machinable & free from blow holes. These wheels have very high load carrying capacity & are suitable for high temperature applications like ovens, foundries etc. The only disadvantage of CI wheels is that they damage the costly floor surfaces.

Hardness of Casting : ( 175 10 ) BHN
Grade of Casting : FG200 as per IS-210
Maximum Working Temperature : 170C

These are manufactured from virgin Ultra High Molecular Weight Poly Ethylene (UHME-PE) powder, white in colour. These wheels are light in weight but have very high load carrying capacity, higher wear resistance as well as high impact strength. Therefore the question of wheel cracking under load or impact load does not arise, as it happens in case of nylon or fiber wheels. The material has got very low coefficient of friction. Therefore, pulling or pushing force required is considerably less. The material does not have any effect of chemicals or acids. Though the UHMW wheels can carry heavy loads, the material is not hard like cast iron. Therefore UHMW wheels do not damage the flooring.

As the UHMW material has got very low coefficient of friction, ball bearing has tendency to rotate in the step bore. To avoid this, metal insert is pressed in the wheel. The metal insert has step bore suitable for ball bearing

These wheels are manufactured from virgin Nylon 6, white in colour, by injection molding. These wheels are light in weight, but have high load carrying capacities. These wheels can be used up to 90C temperature. The acidic or alkaline chemicals have no effect on these wheels.

These wheels are manufactured from virgin Poly Propylene Co-Polymer (PP-CP), white in colour, by injection molding. The wheels are light in weight but have fair load carrying capacity. The acidic or alkaline chemicals have no effect on these wheels.

Polyurethane with high abrasion resistance bonded ( molded ) over a cast iron core forms a PU-CI Wheel. The load carrying capacity as well as life of wheel is much more than that of PU-PP wheel. PU-CI wheels have good shock absorption capacity & very low noise level.

Cast iron wheels with either V-groove (VG), Square groove (SQG), or a Flange (FLG) are available depending upon the track over which the castors has to move. Since the wheels roll over steel track, the pushing or pulling force required is much less, reduces labour fatigue. Floor surface also does not get damage at any time.Hardness of Casting : ( 175 10 ) BHNGrade of Casting : FG200 as per IS-210Maximum Working Temperature : 250C

These are bare cast iron wheels made from good quality graded casting, machinable & free from blow holes. These wheels have very high load carrying capacity & are suitable for high temperature applications like ovens, foundries etc. The only disadvantage of CI wheels is that they damage the costly floor surfaces. Hardness of Casting : ( 175 10 ) BHNGrade of Casting : FG200 as per IS-210Maximum Working Temperature : 170C

These are manufactured from virgin Ultra High Molecular Weight Poly Ethylene (UHME-PE) powder, white in colour. These wheels are light in weight but have very high load carrying capacity, higher wear resistance as well as high impact strength. Therefore the question of wheel cracking under load or impact load does not arise, as it happens in case of nylon or fiber wheels. The material has got very low coefficient of friction. Therefore, pulling or pushing force required is considerably less. The material does not have any effect of chemicals or acids. Though the UHMW wheels can carry heavy loads, the material is not hard like cast iron. Therefore UHMW wheels do not damage the flooring. As the UHMW material has got very low coefficient of friction, ball bearing has tendency to rotate in the step bore. To avoid this, metal insert is pressed in the wheel. The metal insert has step bore suitable for ball bearing

These wheels are manufactured from virgin Nylon 6, white in colour, by injection molding. These wheels are light in weight, but have high load carrying capacities. These wheels can be used up to 90C temperature. The acidic or alkaline chemicals have no effect on these wheels.

These wheels are manufactured from virgin Poly Propylene Co-Polymer (PP-CP), white in colour, by injection molding. The wheels are light in weight but have fair load carrying capacity. The acidic or alkaline chemicals have no effect on these wheels.

Polyurethane with high abrasion resistance bonded ( molded ) over a cast iron core forms a PU-CI Wheel. The load carrying capacity as well as life of wheel is much more than that of PU-PP wheel. PU-CI wheels have good shock absorption capacity & very low noise level.