Ahmedabad, Gujarat, India
Our Products
| APPLICATIONS OF WET SANDBLASTING EQUIPMENT | |
| 1. | Paint removal, rust removal, corrosion removal & scale removal |
| 2. | Casting Cleaning |
| 3. | Ship hull cleaning |
| 4. | Clean & peen precision parts |
| 5. | Produce and anchor pattern ideal for uniform finishing |
| 6. | Deburr machined parts |
| 7. | Blend light scratches and tool marks |
| 8. | Deflash plastic and metal parts |
| 9. | Stone cleaning / designing |
| Model | Flow Rate in LPM (GPM) |
Pressure in bar (PSI) |
Motor HP | Select |
|---|---|---|---|---|
| NHD1415R | 14 (3.7) | 140 (2030) | 5 | |
| NMT2120R | 21 (5.5) | 180 (2610) | 10 | |
| NPM1525R | 15 (4.0) | 250 (3625) | 10 | |
| NLT3020IR | 30 (7.9) | 190 (2755) | 15 | |
| PB18 | 28 (7.4) | 450 (6526) | 40 |
With field confirmed reliability in applications, PressureJet provides the perpetual and most reliable high pressure triplex plunger pumps and systems for UHP fire fighting equipment.
Ultra High Pressure (UHP): The ActualitiesFast decreasing rate in temperatureUsing USP fire suppression and correct attack forms, upper-layer room temperatures can be decreased by more than 1, 000 degrees F in just seconds.Better safety and visibilityDue to quickly dispassion of smoke result get better safety and visibility in UHP Systems. It also give slightly advantage of excellent positive-pressure ventilation capabilities.Ultra EffectiveWithout UHP systems only maximum 20 percent of the water actually goes on fire while in UHP systems, 90 percent of the water directly reach to the fire. The rest of water converts into steam that fills the room and help to remove oxygen and cooling the air.Uses of less waterIn maximum case, Smokeand water are responsible for more damage rather than fire. Due to less water use in USP systems, most of them evaporates which cause less damage.Keep the Pressure OnEvery fire you challenge is different, there are always unknowns. You enter a building without knowing the structure or who may be in it. That's why, when you arrive at a fire the only confident behind you is your power full best equipment for the duty. Equipment that puts fires out faster and more safely than ever before possible. When the pressure's on, you want to be armed with ultra-high pressure (UHP) systems from the Fire.Without going on our words, just schedule a demonstration and feel the power of USP and pressure jet infrastructure. And the confidence of being armed with the greatest effective tools for the job-feels like in your hands.
Sewer jetting pump equipment
For technical and sanitary reasons, sewer jetting pump equipment are frequently cleaned. Particularly, the blocking of the cross sections as well as odour problems need to be avoided. Also, damages at the channel walls must be recognized very early, which is only possible, if the walls are completely clean. Further, inorganic deposits that reduce the sewage treatment efficiency must be removed.
Sewer jetting / drain jetting / gutter cleaning is the process of using sewer jetting pump equipment to bring a sewer drain line back to like-new condition without having to actually replace the line. This is very cost-effective practice, as well as a nearly effortless task- especially for drain jetting that are heavily used, even for grease. (You aren't supposed to be dumping that down there in the first place!).
Anyone, who has ever had to deal with a sewer or even residential septic tank, knows all about clogs and back-ups. Soap scum residue, grease, hair, food, mineral deposits and more can all cause a drain to back up. As much as people try to be careful with what they send down the tube, it is almost inevitable that these things will at some time pass through eventually causing clogs. Even as careful as you are with grease- you may not directly dump it down the drain- but the remaining grease on pots, pans and plates can cause a film that over the years can build up and solidify. Sometimes a simple unclogging could do but after masses of build-up and too frequent blockages, perhaps a good sewer jetting would be a more effective method that will also last plenty longer.
Pressure Jet's high pressure drain jetting pump equipment, drain jetting are completely suitable to achieve all above cleaning results, because these pumps are rugged in construction, have medium speed and perform to the entire satisfaction of the customer.
There are special sewer jetting pump equipment , designed specifically for this purpose, called sewer jetting. They can clean the pipes leading from sinks and bathtubs leading to the tanks, even those at long distances, which is especially helpful in the case of industrial piping. The sewer jetting work at a high pressure, between 150-300 bar and 12-400 lpm. The pressure can be adjusted throughout the job as needed. These sewer jetting pump equipment use a special nozzle that gets down into the drains to loosen and cuts the clogged materials that are obstructing the pathways. This essentially scours the pipes clean and then washes the debris back up to be removed, usually through a vacuum pump.
These kinds of systems are successfully running in different municipal corporations.
For technical and sanitary reasons, sewer jetting pump equipment are frequently cleaned. Particularly, the blocking of the cross sections as well as odour problems need to be avoided. Also, damages at the channel walls must be recognized very early, which is only possible, if the walls are completely clean. Further, inorganic deposits that reduce the sewage treatment efficiency must be removed.
Sewer jetting / drain jetting / gutter cleaning is the process of using sewer jetting pump equipment to bring a sewer drain line back to like-new condition without having to actually replace the line. This is very cost-effective practice, as well as a nearly effortless task- especially for drain jetting that are heavily used, even for grease. (You aren't supposed to be dumping that down there in the first place!).
Anyone, who has ever had to deal with a sewer or even residential septic tank, knows all about clogs and back-ups. Soap scum residue, grease, hair, food, mineral deposits and more can all cause a drain to back up. As much as people try to be careful with what they send down the tube, it is almost inevitable that these things will at some time pass through eventually causing clogs. Even as careful as you are with grease- you may not directly dump it down the drain- but the remaining grease on pots, pans and plates can cause a film that over the years can build up and solidify. Sometimes a simple unclogging could do but after masses of build-up and too frequent blockages, perhaps a good sewer jetting would be a more effective method that will also last plenty longer.
Pressure Jet's high pressure drain jetting pump equipment, drain jetting are completely suitable to achieve all above cleaning results, because these pumps are rugged in construction, have medium speed and perform to the entire satisfaction of the customer.
There are special sewer jetting pump equipment , designed specifically for this purpose, called sewer jetting. They can clean the pipes leading from sinks and bathtubs leading to the tanks, even those at long distances, which is especially helpful in the case of industrial piping. The sewer jetting work at a high pressure, between 150-300 bar and 12-400 lpm. The pressure can be adjusted throughout the job as needed. These sewer jetting pump equipment use a special nozzle that gets down into the drains to loosen and cuts the clogged materials that are obstructing the pathways. This essentially scours the pipes clean and then washes the debris back up to be removed, usually through a vacuum pump.
These kinds of systems are successfully running in different municipal corporations.
APPLICATIONS OF WET SANDBLASTING EQUIPMENT
