Apart from Plate Heat Exchangers (PHE), Freshwater Generators are also our primary subject of expertise, Hundreds been already sent throughout the globe, we excel in refurbishment, supply and exporting freshwater generators, require an entire operational unit? We've got it ready to be shipped. Have one with adversity and needs in-depth technical rectification? Let us know, we have the best solution to make its hassle free, be it on-board a vessel or an offshore-onshore installation, years of knowledge and expertise on the subject has well equipped us to serve our clients to their complete content. We also handle supply and exporting of Titanium plates, NBR gaskets, other requisite attachments, spares and accessories concerned with freshwater generator.  Refurbishment process followed on Fresh Water Generator. After complete dismantling of the unit, each and every part is handled acutely with extreme care, residual and clogged sludge and other impurities are washed off through hydro-jet pressure, post drying, the gaskets are detached from all the Titanium plates, this plates are then submerged into a deep acidic bed, being processed for couple of minutes, the plates are brush scrapped followed by another pressured water bath. The plates are then passed on to detect any adversity, with strict and rigorous quality attention being paid here, three important test, namely, Pin Hole detection, Ultraviolet ray and Die penetration tests are scrutinized on each individual plate, Only the best and most qualified plates are then chosen for further consideration. If considered installing the plates on the unit, new and excellent quality of NBR gaskets are glued on the plates, rest assured as the glue we use here is also industry standard and OEM certified, after the gaskets are successfully glued, the plates are then baked into a kiln for effective drying of the attached gaskets and glue and finally, the plates are ready for onward consideration. By the way, we can provide you the plate with or without gaskets, as per your discretion.         All other physical parts and spares of the dismantled unit are sandblasted, making it free from rust and other anti-oxidants, faulty parts if any, are replaced. All this parts are then sprayed with oxidized paint, acute surfacing coat of paint is then applied prior to a final paint. Once dried, all the parts are carefully brought up and installed together to acquire a stunning and a flashy unit. Pressure test are then carried out on the unit to conclude smooth operation of the unit.        Listed images shows complete refurbishment operations.

Plate heat exchangers, being our primary concern, our procurement also includes a vast and vivid variety of PHE plates, be it of any make or type, our procurement team is always active to hunt down the best available resources from the demolition yard, from procuring an entire enclosed PHE, we also acquire individual and loose plates, once procured, the plates are shifted to our facility house for cleaning, refurbishment, fault detection, that includes three mandatory and rigorous tests being carried out on each individual plate to get the best out of the best. We are more concerned on quality work rather than quantity, hence let me ask you to rest assured when it comes to trusting the plates supplied by us, all you need to do is just install and forget it as we have already taken care of those crucial work and scrutinized this plates to give you the most optimum standard of sources available. We have a well maintained inventory of almost all model-type of PHE plates manufactured by Alfa Laval, APV, Sondex, GEA Tranter, Schmidt and other reputed make, ask us for Titanium or Stainless Steel graded plates, we have them in stores. Concerned on meeting the deadline or ETA of the vessel while delivering the plates? Seeking more flexibility upon hectic office schedules? Or do not have enough or competent workforce to install gaskets on the plates? Relax, we can be of help here, just let us know whether you want the gaskets glued/installed on the plates and we will take care of things, no matter how urgent, we can deliver as per the timeline asked, we house the most apt personnel working for us, regardless of time, we are there to get the job done, effectively and efficiently.         

• Brand NameAlfa Laval, GVR, APV

We are offering marine machinery, marine equipments, marine accessories. marine machinery, consisting of main and auxiliary engine, dg sets, winches, cranes and all marine related hydraulics, pneumatics machinery, equipments and spares. specialization in new and refurbished plates heat exchangers, fresh water generator, oil purifiers and individual plates related to heat exchangers and generators.

Apart from Plate Heat Exchangers (PHE), Freshwater Generators are also our primary subject of expertise, Hundreds been already sent throughout the globe, we excel in refurbishment, supply and exporting freshwater generators, require an entire operational unit? We've got it ready to be shipped. Have one with adversity and needs in-depth technical rectification? Let us know, we have the best solution to make its hassle free, be it on-board a vessel or an offshore-onshore installation, years of knowledge and expertise on the subject has well equipped us to serve our clients to their complete content. We also handle supply and exporting of Titanium plates, NBR gaskets, other requisite attachments, spares and accessories concerned with freshwater generator.  Refurbishment process followed on Fresh Water Generator. After complete dismantling of the unit, each and every part is handled acutely with extreme care, residual and clogged sludge and other impurities are washed off through hydro-jet pressure, post drying, the gaskets are detached from all the Titanium plates, this plates are then submerged into a deep acidic bed, being processed for couple of minutes, the plates are brush scrapped followed by another pressured water bath. The plates are then passed on to detect any adversity, with strict and rigorous quality attention being paid here, three important test, namely, Pin Hole detection, Ultraviolet ray and Die penetration tests are scrutinized on each individual plate, Only the best and most qualified plates are then chosen for further consideration. If considered installing the plates on the unit, new and excellent quality of NBR gaskets are glued on the plates, rest assured as the glue we use here is also industry standard and OEM certified, after the gaskets are successfully glued, the plates are then baked into a kiln for effective drying of the attached gaskets and glue and finally, the plates are ready for onward consideration. By the way, we can provide you the plate with or without gaskets, as per your discretion.         All other physical parts and spares of the dismantled unit are sandblasted, making it free from rust and other anti-oxidants, faulty parts if any, are replaced. All this parts are then sprayed with oxidized paint, acute surfacing coat of paint is then applied prior to a final paint. Once dried, all the parts are carefully brought up and installed together to acquire a stunning and a flashy unit. Pressure test are then carried out on the unit to conclude smooth operation of the unit.        Listed images shows complete refurbishment operations.

Plate heat exchangers, being our primary concern, our procurement also includes a vast and vivid variety of PHE plates, be it of any make or type, our procurement team is always active to hunt down the best available resources from the demolition yard, from procuring an entire enclosed PHE, we also acquire individual and loose plates, once procured, the plates are shifted to our facility house for cleaning, refurbishment, fault detection, that includes three mandatory and rigorous tests being carried out on each individual plate to get the best out of the best. We are more concerned on quality work rather than quantity, hence let me ask you to rest assured when it comes to trusting the plates supplied by us, all you need to do is just install and forget it as we have already taken care of those crucial work and scrutinized this plates to give you the most optimum standard of sources available. We have a well maintained inventory of almost all model-type of PHE plates manufactured by Alfa Laval, APV, Sondex, GEA Tranter, Schmidt and other reputed make, ask us for Titanium or Stainless Steel graded plates, we have them in stores. Concerned on meeting the deadline or ETA of the vessel while delivering the plates? Seeking more flexibility upon hectic office schedules? Or do not have enough or competent workforce to install gaskets on the plates? Relax, we can be of help here, just let us know whether you want the gaskets glued/installed on the plates and we will take care of things, no matter how urgent, we can deliver as per the timeline asked, we house the most apt personnel working for us, regardless of time, we are there to get the job done, effectively and efficiently.         

• Brand NameAlfa Laval, GVR, APV

We are offering marine machinery, marine equipments, marine accessories. marine machinery, consisting of main and auxiliary engine, dg sets, winches, cranes and all marine related hydraulics, pneumatics machinery, equipments and spares. specialization in new and refurbished plates heat exchangers, fresh water generator, oil purifiers and individual plates related to heat exchangers and generators.