We are the leading manufacturers of table top Ultrasonic Cleaning machines for household, salons, laboratories, clinics, medical colleges, dental colleges, jewelry shops and auto industries.

Used for:

*PCB Cleaning
*Dentures Cleaning
*Jewelry Cleaning
*Surgical Instruments Cleaning
*Combs cleaning
*Small machines parts cleaning
*Spa Kit cleaning
*Tattoo Gun cleaning
*Stones cleaning
*Diamond Cleaning
*Fruits & Vegetable clenaing

and much more

We take pride to introduce ourselves as a remarkable mold cleaning system manufacturer and exporter based in india. These are low maintenance equipments offering efficacious service. They arent troublesome unlike other run-of-the-mill cleaning systems. To top it all, these are reasonably priced.

the transonic mold and die cleaning system is a high-tech, low-labor method for cleaning injection molds and dies. transonic ultrasonic cleaning removes carbonization, mold release, gassing, flashing, and other residues from molds and dies in as little as 15-20 minutes. transonic mold and die cleaning systems.reduce maintenance down time eliminate hand-cleaning replace troublesome solvents and harsh abrasives that can damage molds improve cleaning effectiveness as chemistry and ultrasonic gently clean even intricate designs and patterns decrease labour expensestransonic ultrasonic mold and die cleaning systems have been proven effective on steel, chrome-plated steel, nickel-plated steel, and electroless-nickel-with-teflon plated steel.transonic mold cleaning system consists of three stage-cleaning tanks as under :pre rinse tank or soak tank :this is a simple dipping tank having cleaning chemical sk 4053 mixed with water in ratio of 1:20. The purpose of this tank is to loosen the contaminations & remove floating oils from the mold that may otherwise contaminate the ultrasonic chamber. The dipping time in this tank depends on the level of contamination. Normally 15-30 minutes is sufficient. The temperature of this tank should be around 60 deg. C.ultrasonic cleaning :flood washing in plain water :

salient featurestotally stainless steel construction thermal and noise insulation surface skimming of liquid and a weir in wash tank low level protection thermostat controlled heating drain valve water inlet valve work support grill* cascade water refill* rim lip ventilation channels on all stages*protective guide rails*submersible transducer boxes** excluding rkt 500 and rkt 1000options includeextraction fan ex-rated extraction fan work platform rinse tank (with or without heating) dewatering tank with liquid sight glass standard baskets jigs for mold plates drain down / air blow off station ultrasonic rinse

We are offering fruits and vegetable cleaner.can ultrasonic cleaner effectively clean fruits & vegetables?
as it is often said we are what we eat and believe it or not, in todays scenario, we are inadvertently consuming fruits and vegetables which are highly contaminated with various dangerous chemicals, artificial waxes and plenty of unknown pathogens. It is hard to digest but true to know that the fruits and vegetables we consume today have abundance of pesticides, herbicides, weedicides, fungicides, artificial oil & waxing and a lot many harmful pathogens which are caused during negligent transportation and manhandling of the eatables.

according to recent news reports, the fruits and vegetables in india are laced with surface toxic contaminants like insecticides, pesticide residue, bacteria, dirt, wax, grime, fungicides, artificial ripening agents like calcium carbide etc. These chemicals cannot be washed away with just plain water. The concentration of these chemicals are sometimes significantly high as compared to fruits & vegetables from other countries across the globe. These chemicals might not have a visible immediate effect, however long term consumption of such eatables could be a reason for cancer, reproductive damage, stunted physical and mental growth in children etc. Keeping all this aside, heavy manhandling of the fruits and vegetables during the transport system makes them more prone to germicidal and bacterial contamination before reaching the final destination.
How does ultrasonic cleaning help?
brief:
by travelling through water with a frequency of 30-50 khz, ultrasonic waves produce millions of microscopic air cavities loaded with vacuum energy. These air cavities, when getting in contact with surfaces create a vacuum effect. The result is the quick separation of greases, carbons, chemicals, blood, particles from these surfaces. In the mean time, these surfaces are also cleaned from any bacteria or living organism.

an ultrasonic cleaner comprises of a tank (with different sizes), motor circuit for cleaning the eatables, a removable basket tray. To begin the cleaning process, the cleaning tank is filled with water or a cleaning solution. As soon as the ultrasonic washers is switched on with water and fruitsvegetables, ultrasonic waves in the range of 30-50 khz creates compression waves in the liquid resulting in the creation of partial vacuum bubbles. These vacuum bubbles clings to the foreign particles such as dirt, wax, polish, pesticides and scrubs them off with an implosion effect which is created when the bubbles collapses. The enormous energy creates a pulling effect which even reaches narrow crevices of the fruits & vegetables to remove dirt, dust, germs, pesticides and other contaminants.

the cleaning done by ultrasonic cleaner not only disinfects fruits and vegetables but can also be used to cleaning and disinfecting of regular household objects like:*cleaning of baby products, feeding bottles, small toys *cleaning of jewellery items (goldsilverdiamond etc.)*cleaning of small machined parts *cleaning of dentures*cleaning of eyewear, sunglasses*cleaning of watch straps & bracelets

Neatstrike golf club cleaning machine as cleans golf clubs and hand grips within 10 minutes. No need of scrubbing, soap wash, brushing etc. Its a revolutionary club cleaning machine that will change the way you clean your clubs today. Call us for demos & trials.

The company is renowned as celebrated Aqueous Cleaners Manufacturer and exporter. Our Aqueous Cleaners are one of a kind cleaners facilitating eminent service. The aqueous part cleaners are available with us at pocket friendly rates. These have ideal attributes thus making them an admirable proffering.

We are offering ultrasonic cleaning transducer.
when the part size or configuration requires a special-sized ultrasonic cleaning tank, transonic employs immersible transducers; an immersible transducer is a hermetically sealed stainless steel container, which contains a number of transducer elements. These transducers offer the major advantage of versatility in system design. The custom cleaning tank can be nearly any size that is appropriate to the application, and the transducers can be mounted so that the ultrasonic energy is directed and concentrated where it is needed most. In many cases, our customers already have an existing tank, which they wish to convert into an ultrasonic aqueous cleaning, or solvent cleaning system. this is possible using submersible ultrasonic systems. All submersible ultrasonic systems are composed of 1 or more submersible transducer packs, and 1 or more ultrasonic generators which connect to these packs to create an ultrasonic aqueous cleaner out of any existing tank. Submersible transducers for aqueous cleaners are hermetically sealed stainless steel boxes, approximately 3-4" tall, which contain any number of individual ultrasonic transducers. The submersible transducer pack is positioned on the tank bottom or sides, and connected to the ultrasonic generator using a liquid-tight riser tube, which passes the electrical cable through the top of the cleaning tank. Other electrical mounting options include the use of bulkhead mounts, which require that a hole be cut into the tank bottom through which the electrical cable will pass. immersible transducer configurations transonic offers three transducer configurations, which vary according to there mounting means and electrical connections: type 1the most versatile type; does not require holes in the tank. May be side or bottom mounted using integral mounting flanges. Watertight 3' lead cables included. Special lengths available; also right-angle fitting for tight radius turns. Type 2for bottom mounting, especially where under tank clearance prevents use of type. May be affixed to tank bottom, using integral mounting flange. Standard 1" mounting fitting supplied; other lengths available. The most versatile type; does not require holes in the tank. May be side or bottom mounted using integral mounting flanges. Watertight 3' lead cables included. Special lengths available; also right-angle fitting for tight radius turns. Type 3for side mounting; most commonly only in high-power applications. One or two bulkhead fittings, depending on transducer size. Supplied with 8' rf cable, which allows master junction box to be remotely located. Special length cables available.

We are the leading manufacturers of table top Ultrasonic Cleaning machines for household, salons, laboratories, clinics, medical colleges, dental colleges, jewelry shops and auto industries.

Used for:

*PCB Cleaning
*Dentures Cleaning
*Jewelry Cleaning
*Surgical Instruments Cleaning
*Combs cleaning
*Small machines parts cleaning
*Spa Kit cleaning
*Tattoo Gun cleaning
*Stones cleaning
*Diamond Cleaning
*Fruits & Vegetable clenaing

and much more

We take pride to introduce ourselves as a remarkable mold cleaning system manufacturer and exporter based in india. These are low maintenance equipments offering efficacious service. They arent troublesome unlike other run-of-the-mill cleaning systems. To top it all, these are reasonably priced.

the transonic mold and die cleaning system is a high-tech, low-labor method for cleaning injection molds and dies. transonic ultrasonic cleaning removes carbonization, mold release, gassing, flashing, and other residues from molds and dies in as little as 15-20 minutes. transonic mold and die cleaning systems.reduce maintenance down time eliminate hand-cleaning replace troublesome solvents and harsh abrasives that can damage molds improve cleaning effectiveness as chemistry and ultrasonic gently clean even intricate designs and patterns decrease labour expensestransonic ultrasonic mold and die cleaning systems have been proven effective on steel, chrome-plated steel, nickel-plated steel, and electroless-nickel-with-teflon plated steel.transonic mold cleaning system consists of three stage-cleaning tanks as under :pre rinse tank or soak tank :this is a simple dipping tank having cleaning chemical sk 4053 mixed with water in ratio of 1:20. The purpose of this tank is to loosen the contaminations & remove floating oils from the mold that may otherwise contaminate the ultrasonic chamber. The dipping time in this tank depends on the level of contamination. Normally 15-30 minutes is sufficient. The temperature of this tank should be around 60 deg. C.ultrasonic cleaning :flood washing in plain water :

salient featurestotally stainless steel construction thermal and noise insulation surface skimming of liquid and a weir in wash tank low level protection thermostat controlled heating drain valve water inlet valve work support grill* cascade water refill* rim lip ventilation channels on all stages*protective guide rails*submersible transducer boxes** excluding rkt 500 and rkt 1000options includeextraction fan ex-rated extraction fan work platform rinse tank (with or without heating) dewatering tank with liquid sight glass standard baskets jigs for mold plates drain down / air blow off station ultrasonic rinse

We are offering fruits and vegetable cleaner.can ultrasonic cleaner effectively clean fruits & vegetables?
as it is often said we are what we eat and believe it or not, in todays scenario, we are inadvertently consuming fruits and vegetables which are highly contaminated with various dangerous chemicals, artificial waxes and plenty of unknown pathogens. It is hard to digest but true to know that the fruits and vegetables we consume today have abundance of pesticides, herbicides, weedicides, fungicides, artificial oil & waxing and a lot many harmful pathogens which are caused during negligent transportation and manhandling of the eatables.

according to recent news reports, the fruits and vegetables in india are laced with surface toxic contaminants like insecticides, pesticide residue, bacteria, dirt, wax, grime, fungicides, artificial ripening agents like calcium carbide etc. These chemicals cannot be washed away with just plain water. The concentration of these chemicals are sometimes significantly high as compared to fruits & vegetables from other countries across the globe. These chemicals might not have a visible immediate effect, however long term consumption of such eatables could be a reason for cancer, reproductive damage, stunted physical and mental growth in children etc. Keeping all this aside, heavy manhandling of the fruits and vegetables during the transport system makes them more prone to germicidal and bacterial contamination before reaching the final destination.
How does ultrasonic cleaning help?
brief:
by travelling through water with a frequency of 30-50 khz, ultrasonic waves produce millions of microscopic air cavities loaded with vacuum energy. These air cavities, when getting in contact with surfaces create a vacuum effect. The result is the quick separation of greases, carbons, chemicals, blood, particles from these surfaces. In the mean time, these surfaces are also cleaned from any bacteria or living organism.

an ultrasonic cleaner comprises of a tank (with different sizes), motor circuit for cleaning the eatables, a removable basket tray. To begin the cleaning process, the cleaning tank is filled with water or a cleaning solution. As soon as the ultrasonic washers is switched on with water and fruitsvegetables, ultrasonic waves in the range of 30-50 khz creates compression waves in the liquid resulting in the creation of partial vacuum bubbles. These vacuum bubbles clings to the foreign particles such as dirt, wax, polish, pesticides and scrubs them off with an implosion effect which is created when the bubbles collapses. The enormous energy creates a pulling effect which even reaches narrow crevices of the fruits & vegetables to remove dirt, dust, germs, pesticides and other contaminants.

the cleaning done by ultrasonic cleaner not only disinfects fruits and vegetables but can also be used to cleaning and disinfecting of regular household objects like:*cleaning of baby products, feeding bottles, small toys *cleaning of jewellery items (goldsilverdiamond etc.)*cleaning of small machined parts *cleaning of dentures*cleaning of eyewear, sunglasses*cleaning of watch straps & bracelets

Neatstrike golf club cleaning machine as cleans golf clubs and hand grips within 10 minutes. No need of scrubbing, soap wash, brushing etc. Its a revolutionary club cleaning machine that will change the way you clean your clubs today. Call us for demos & trials.

The company is renowned as celebrated Aqueous Cleaners Manufacturer and exporter. Our Aqueous Cleaners are one of a kind cleaners facilitating eminent service. The aqueous part cleaners are available with us at pocket friendly rates. These have ideal attributes thus making them an admirable proffering.

We are offering ultrasonic cleaning transducer.
when the part size or configuration requires a special-sized ultrasonic cleaning tank, transonic employs immersible transducers; an immersible transducer is a hermetically sealed stainless steel container, which contains a number of transducer elements. These transducers offer the major advantage of versatility in system design. The custom cleaning tank can be nearly any size that is appropriate to the application, and the transducers can be mounted so that the ultrasonic energy is directed and concentrated where it is needed most. In many cases, our customers already have an existing tank, which they wish to convert into an ultrasonic aqueous cleaning, or solvent cleaning system. this is possible using submersible ultrasonic systems. All submersible ultrasonic systems are composed of 1 or more submersible transducer packs, and 1 or more ultrasonic generators which connect to these packs to create an ultrasonic aqueous cleaner out of any existing tank. Submersible transducers for aqueous cleaners are hermetically sealed stainless steel boxes, approximately 3-4" tall, which contain any number of individual ultrasonic transducers. The submersible transducer pack is positioned on the tank bottom or sides, and connected to the ultrasonic generator using a liquid-tight riser tube, which passes the electrical cable through the top of the cleaning tank. Other electrical mounting options include the use of bulkhead mounts, which require that a hole be cut into the tank bottom through which the electrical cable will pass. immersible transducer configurations transonic offers three transducer configurations, which vary according to there mounting means and electrical connections: type 1the most versatile type; does not require holes in the tank. May be side or bottom mounted using integral mounting flanges. Watertight 3' lead cables included. Special lengths available; also right-angle fitting for tight radius turns. Type 2for bottom mounting, especially where under tank clearance prevents use of type. May be affixed to tank bottom, using integral mounting flange. Standard 1" mounting fitting supplied; other lengths available. The most versatile type; does not require holes in the tank. May be side or bottom mounted using integral mounting flanges. Watertight 3' lead cables included. Special lengths available; also right-angle fitting for tight radius turns. Type 3for side mounting; most commonly only in high-power applications. One or two bulkhead fittings, depending on transducer size. Supplied with 8' rf cable, which allows master junction box to be remotely located. Special length cables available.