User friendly ladder editor on lines of IEC61131-3 Built-in HMI configuration facility On-line and Off-line simulation possible Exhaustive function and function block library Auto read and Auto save facility Auto declared variable to represent physical IO of selected configuration Project upload from targetEditable passwords for download, upload and project Facility to set debounce time for physical inputs Hardware compatibility - Facility to download applications into the previous versions of bootloader by selecting respective hardware version. Customized protocol support (MM3010, MM3030-2)

The Selec MM3010 Programmable Logic Controllers Customized IO Expandable PLC for machines are advanced, PLC with built in 4 line 16 character LCD HMI which are designed for control of operation of equipment, machinery, systems or processes in a wide range of industrial applications. It has flexible Input/Output card configuration as mentioned below. Supports IO610 Expansion modules. Program communication is through RS 232 and also RS485 MODBUS available. Online parameter setting. Battery back up and RTC available. The PLC is housed in compact square enclosures which panel mounts, and are auxiliary powered from either 24Vac/dc or 85 to 270Vac. Free User friendly windows based software for Ladder and HMI configuration.

• 4 x 16 line character LCD display.
• Flexible card configuration.
• Online parameter setting.
• Battery back up and RTC available.
• RS 232 / RS 485 based Communication with modbus protocol.

The Durus Controllers are loaded with features such as easy to use built-in display/keypad, high current outputs and multiple communication options. These compact and affordable controllers are ideal for simple control applications including lighting control, gate control, HVAC, pump control and much more.

The Selec XC200NX is a 6 digit Counter with push wheel setting suitable for counting operation of equipment, machinery, systems or processes in a wide range of industrial applications. It has following operating modes on-delay, Interval delay, auto reset, time pulse repeat. Accepts input from - Proximity switches, Encoders, Potential free contacts with optional 10 years memory retention, with input speed from 0 to 5 KHZ and 9999 counts and 4.00 RPM/RPH to 99999 RPM/RPH and to operate two independent relay output contacts with two set point which are isolated from the supply voltage. These counters are housed in a compact panel mounting enclosure and are powered from 85 to 270V AC/DC.

• 5 digits RPM indicator, 6 digts counter
• LED status indicator: Relay 1, Relay 2
• 2 setpoints
• Programmable input scaling
• Up, Down, Quadrature & Bi-directional

The Selec LXC 900 counter is a 8 digit LCD timer with self powered battery and backlight suitable for counting operation of equipment, machinery, systems or processes in a wide range of industrial applications. 8 digit counting, to operate with contact input or voltage input. These counters are housed in a compact panel mounting enclosure and are powered from 24 to 260Vac/dc.

• 8 digit LCD counter
• Self powered
• Long battery life
• Contact / Voltage input

The Selec XC410 is a 6 digit Counter with push buttons suitable for counting operation of equipment, machinery, systems or processes in a wide range of industrial applications. Accepts input from - Proximity switches, Encoders, Potential free contacts with optional 10 years memory retention, with input speed from 0 to 1 KHZ and 999999 counts. These counters are housed in a compact panel mounting enclosure and are powered from 90 to 270Vac/dc.

• 6 digits, 7 segments LED totaliser
• Compact size
• Inbuilt sensor supply

The Selec XC22B is a 4 digit Counter with push wheel setting suitable for counting operation of equipment, machinery, systems or processes in a wide range of industrial applications .It has following operating modes on-delay, Interval delay, auto reset. Accepts input from - Proximity switches, Encoders, Potential free contacts with optional 10 years memory retention , with input speed from 0 to 2 KHZ and 9999 counts and to operate two independent relay output contacts with single set point which are isolated from the supply voltage. These counters are housed in a compact panel mounting enclosure and are powered from 230/110 Vac/dc.

• Preset counter
• Thumbwheel setting
• Auto reset
• Battery backup (Optional)

The Selec EM306-A energy meter is Digital Panel Meters which can indicate energy, power, power factor in operation of equipment, machinery, systems or processes in a wide range of industrial applications. It consists of LED display. Comprises of Input type: 3-4 wire and 1-2 wire input type and a Programmable CT /PT primary and secondary. Supply Voltage: 90 to 270V AC/DC (50/60 Hz).

• Energy (Active)
• Programmable CT Primary / Secondary
• LED indications
• Pulse outp

The Selec EM306-A energy meter is Digital Panel Meters which can indicate energy, power, power factor in operation of equipment, machinery, systems or processes in a wide range of industrial applications. It consists of LED display. Comprises of Input type: 3-4 wire and 1-2 wire input type and a Programmable CT /PT primary and secondary. Supply Voltage: 90 to 270V AC/DC (50/60 Hz).

• 3 Power (Active, Reactive)
• 3 Power factor
• Energy (Active, Reactive, Apparent)
• Programmable CT, PT
• Modbus RTU communication (RS485) (optional)
• Single pulse output

The Selec MV 15 Digital Panel Meters - Digital Voltmeter wide range which can Indicate Voltage in operation of equipment, machinery, systems or processes in a wide range of industrial applications. It consists of 3/4 Digit, 7 segment LED display. Comprises of Input type: 1-2 wire with 0.001 resolution. Supply Voltage: 240V or 24 AC/DC (50/60 Hz).

• 3 digit, 7 segment LED display
• True RMS measurement
• For 1 phase 2 wire electrical network

The Selec MV 205 Digital Panel Meters - Digital Voltmeter wide range which can Indicate Voltage in operation of equipment, machinery, systems or processes in a wide range of industrial applications. It consists of 3/4 Digit, 7 segment LED display. Comprises of Input type: 1-2 wire with 0.001 resolution. Supply Voltage: 240V

• 3 digit, 7 segment LED display
• True RMS measurement
• For 1 phase 2 wire electrical network

The Selec MV 305 Digital Panel Meters - Digital Voltmeter wide range which can Indicate Voltage in operation of equipment, machinery, systems or processes in a wide range of industrial applications. It consists of 3/4 Digit, 7 segment LED display. Comprises of Input type: 1-2 wire with 0.001 resolution. Supply Voltage: 240V

• 3 digit, 7 segment LED display
• True RMS measurement
• For 1 phase 2 wire electrical network

The Selec MV 507 Digital Panel Meters - Digital Voltmeter wide range which can Indicate Voltage in operation of equipment, machinery, systems or processes in a wide range of industrial applications. It consists of LCD display with Digital readout with analog style bargraph indication. Comprises of Input type: 1-2 wire with 0.001 resolution. Supply Voltage: 240V

• Liquid Crystal Display
• Single row, 3 digits
• Digital readout with analog style bargraph indication
• True RMS measurement
• For 1 phase 2 wire electrical network

The Selec MV 207 Digital Panel Meters - Digital Voltmeter wide range which can Indicate Voltage in operation of equipment, machinery, systems or processes in a wide range of industrial applications. It consists LCD display with Digital readout with analog style bargraph indication. Comprises of Input type: 2-2 wire with 0.001 resolution. Supply Voltage: 240V

• Liquid Crystal Display
• Single row, 3 digits
• Digital readout with analog style bargraph indication
• True RMS measurement
• For 2 phase 2 wire electrical network

The Selec MV 2307 Digital Panel Meters - Digital Voltmeter wide range which can Indicate Voltage in operation of equipment, machinery, systems or processes in a wide range of industrial applications. It consists LCD display with Digital readout with analog style bargraph indication. Comprises of Input type: 3-4 wire with 0.001 resolution. Supply Voltage: 240V

• Liquid Crystal Display
• Single row, 3 digits
• Digital readout with analog style bargraph indication
• True RMS measurement
• For 3 phase, 4 wire electrical network
• Page selection using selection switch

The Selec MP14 Digital Panel Meters - Digital Power Factor Meter which can Indicate power factor in operation of equipment, machinery, systems or processes in a wide range of industrial applications. It consists of 4 Digit, 7 segment LED display. Comprises of Input type: 1-2 wire with 0.001 resolution. Supply Voltage: 240V (50 Hz).

• 4 digit, 7 segment LED
• 0.001 resolution

The Selec MP214 Digital Panel Meters - Digital Power Factor Meter which can Indicate power factor in operation of equipment, machinery, systems or processes in a wide range of industrial applications. It consists of 4 Digit, 7 segment LED display. Comprises of Input type: 1-2 wire with 0.001 resolution. Supply Voltage: 240V (50 Hz).

• 4 digit, 7 segment LED
• 0.001 resolution

TThe Selec MP314 Digital Panel Meters - Digital Power Factor Meter which can Indicate power factor in operation of equipment, machinery, systems or processes in a wide range of industrial applications. It consists of 4 Digit, 7 segment LED display. Comprises of Input type: 1-2 wire with 0.001 resolution. Supply Voltage: 240V (50 Hz).

• 4 digit, 7 segment LED
• 0.001 resolution

The Selec MM1012 Programmable Logic Controllers Customized PLC for machines are advanced, PLC with built in LED HMI which are designed for control of operation of equipment, machinery, systems or processes in a wide range of industrial applications. It has 6 Digital inputs, 4 Relay outputs, 2 analog inputs, TC / RTD / 0-10V / 0-20 mA(User selectable) 1 analog output. Program communication is through RS485 MODBUS. The PLC is housed in compact square enclosures which panel mounts, and are auxiliary powered from either 24Vac/dc or 85 to 270Vac. Free User friendly windows based software for Ladder and HMI configuration.

• 6 Digital inputs
• 4 Relay outputs
• 2 analog inputs, TC / RTD / 0-10V / 0-20 mA(User selectable)
• 1 analog output

The Selec TC544 is a sophisticated auto tuning PID controller or on/off controller with selectable thermocouple, RTD up to two outputs. Versions are available with different relay and SSR outputs. The controller can be configured as on/off or PID control and alarm outputs, or as 2 on/off or PID controls (heat/cool) plus 1 alarm output. It has a large dual 4 digit LED display to show the set point and the process value and is suitable for use with power supplies of 85 to 270 VAC.

The Selec TC513 is a sophisticated auto tuning PID controller or on/off controller with selectable thermocouple, RTD up to two outputs. Versions are available with different relay and SSR outputs. The controller can be configured as on/off or PID control and alarm outputs, or as 2 on/off or PID controls (heat/cool) plus 1 alarm output. It has a large dual 3 digit LED display to show the set point and the process value and is suitable for use with power supplies of 85 to 270 VAC

• Single display, 3 digit, 7 segment LED
• TC / RTD inputs
• PID, ON/OFF control
• Single set point
• C / F selectable
• Field selectable control output (Relay or SSR)
• Easy to use

The Selec TC518 is a sophisticated auto tuning PID controller or on/off controller with selectable thermocouple, RTD up to two outputs. Versions are available with different relay and SSR outputs. The controller can be configured as on/off or PID control and alarm outputs, or as 2 on/off or PID controls (heat/cool) plus 1 alarm output. It has a large dual 3 digit LED display to show the set point and the process value and is suitable for use with power supplies of 85 to 270 VAC

• High performance
• Dual display, 4 digit, 7 segment LED
• LED status indicator: Relay ON, Tune
• 3 front panel control buttons
• TC / RTD inputs
• PID, ON/OFF control
• Single set point
• C / F selectable
• Control output: Relay or SSR drive

The Selec PID 528 temperature controllers or on/off controller are advanced, 4 digit auto-tuning controllers with up to 2 outputs which are designed for control of temperature or processes in a wide range of industrial applications. The controllers operate from a range of thermocouple or 2/3 wire PT100 (RTD) input sensors. Versions are available with relay, SSR or analogue outputs which can be configured as 1 on/off or PID control and up to 2 alarm outputs, or as 2 on/off or PID controls (heat/cool) output. The temperature controllers are housed in a compact square enclosure which panel mounts, and are auxiliary powered from 85 to 270V AC.

• Dual display, 4 digit, 7 segment LED
• TC / RTD input
• ON-OFF, PID, PID auto tune
• Two set points
• Control output: Relay or SSR drive
• Alarm output: Relay

The Selec DTC204 is a sophisticated auto tuning PID controller or on/off controller with selectable thermocouple, RTD up to two outputs. Versions are available with different relay and SSR outputs. The controller can be configured as on/off or PID control and alarm outputs, or as 2 on/off or PID controls (heat/cool) plus 1 alarm output. It has a large dual 4 digit LED display to show the set point and the process value and is suitable for use with power supplies of 85 to 270 VAC.

The Selec TC203 is a sophisticated auto tuning PID controller or on/off controller with selectable thermocouple, RTD up to two outputs. Versions are available with different relay and SSR outputs. The controller can be configured as on/off or PID control and alarm outputs, or as 2 on/off or PID controls (heat/cool) plus 1 alarm output. It has a large dual 3 digit LED display to show the set point and the process value and is suitable for use with power supplies of 85 to 270 VAC

• Single display, 3 digit, 7 segment LED
• TC / RTD inputs
• PID, ON/OFF control
• Single set point
• C / F selectable
• Field selectable control output (Relay or SSR)
• Easy to use

The Selec TC244 is a sophisticated auto tuning PID controller or on/off controller with selectable thermocouple, RTD up to two outputs. Versions are available with different relay and SSR outputs. The controller can be configured as on/off or PID control and alarm outputs, or as 2 on/off or PID controls (heat/cool) plus 1 alarm output. It has a large dual 4 digit LED display to show the set point and the process value and is suitable for use with power supplies of 85 to 270 VAC.

The Selec DTC324 is a sophisticated auto tuning PID controller or on/off controller with selectable thermocouple, RTD up to two outputs. Versions are available with different relay and SSR outputs. The controller can be configured as on/off or PID control and alarm outputs, or as 2 on/off or PID controls (heat/cool) plus 1 alarm output. It has a large dual 4 digit LED display to show the set point and the process value and is suitable for use with power supplies of 85 to 270V AC.

The Selec TC303 is a sophisticated auto tuning PID controller or on/off controller with selectable thermocouple, RTD up to two outputs. Versions are available with different relay and SSR outputs. The controller can be configured as on/off or PID control and alarm outputs, or as 2 on/off or PID controls (heat/cool) plus 1 alarm output. It has a large dual 3 digit LED display to show the set point and the process value and is suitable for use with power supplies of 85 to 270V AC

• Single display, 3 digit, 7 segment LED
• TC / RTD inputs
• PID, ON/OFF control
• Single set point
• C / F selectable
• Field selectable control output (Relay or SSR)
• Easy to use

The Selec TC344 is a sophisticated auto tuning PID controller or on/off controller with selectable thermocouple, RTD up to two outputs. Versions are available with different relay and SSR outputs. The controller can be configured as on/off or PID control and alarm outputs, or as 2 on/off or PID controls (heat/cool) plus 1 alarm output. It has a large dual 4 digit LED display to show the set point and the process value and is suitable for use with power supplies of 85 to 270V AC.

The Selec MM3032 Programmable Logic Controllers Customized IO Expandable PLC for machines are advanced, PLC with built in 2 line 16 character LCD HMI which are designed for control of operation of equipment, machinery, systems or processes in a wide range of industrial applications. It has 8 Digital inputs, 6 Digital outputs, 2 analog input, V/I. Supports IO630 Proprietary Expansion modules. Program communication is through RS 232 MODBUS. Online parameter setting. Battery back up and RTC available. The PLC is housed in compact square enclosures which panel mounts, and are auxiliary powered from either 24V ac/dc or 85 to 270Vac. Free User friendly windows based software for Ladder and HMI configuration.

• 4 line X 16 character LCD display
• User friendly windows based software for Ladder and HMI configuration.
• 8 DI, 6DO, 2AI(V/I)-270v-Proprietary expansion
• 08 Digital Input (DI08)
• 06 Digital Output (DO06)
• 02 Analog Input (2AI(V / I))

The Selec MM3030 Programmable Logic Controllers Customized IO Expandable PLC for machines are advanced, PLC with built in 4 line 16 character LCD HMI which are designed for control of operation of equipment, machinery, systems or processes in a wide range of industrial applications. It has 10 Digital inputs, 8 Digital outputs, 2 analog input, V/I. Supports IO630 Proprietary Expansion modules. Program communication is through RS 232 MODBUS. Online parameter setting. Battery back up and RTC available. The PLC is housed in compact square enclosures which panel mounts, and are auxiliary powered from either 24Vac/dc or 85 to 270Vac.Free User friendly windows based software for Ladder and HMI configuration.

• 4 line X 16 character LCD display
• Supports IO6130 Expansion modules
• User friendly windows based software for Ladder and HMI configuration.
• 10 DI, 8DO, 2AI(V/I)-24vdc - Proprietary expansion
• 10 Digital Input (DI10)
• 08 Digital Output (DO08) (DO06 for MM3030-3)
• 02 Analog Input (2AI(V/I))

The Selec MM1010 Programmable Logic Controllers Customized PLC for machines are advanced, PLC with built in LED HMI which are designed for control of operation of equipment, machinery, systems or processes in a wide range of industrial applications. It has 8 Digital inputs, 5 Relay outputs, 1 analog input, TC / RTD (User selectable). Program communication is through RS485 MODBUS. The PLC is housed in compact square enclosures which panel mounts, and are auxiliary powered from either 24Vac/dc or 85 to 270Vac.Free User friendly windows based software for Ladder and HMI configuration.

• Compact PLC with built-in HMI
• Configurable LED display
• 8 digital inputs & 5 relay outputs
• Single analog input
• User friendly windows based software for ladder programming & HMI configuration