Other Products / Services #83444

Double Face LED Airport Guidance Sign Boards

Item Code :SEAGSLED2F

Features

• Designed and developed as per ICAO Annex 14 and FAA Standards.
• Virtually eliminates runway shutdowns due to LED light source.
• Direct replacement for existing sign.
• Creates a highly uniform distribution of light, eliminating hot spots and shadows.
• Operates on ferroresonant or thyristor CCRs that are designed in compliance with FAA / ICAO-ANNEX-14 Ch-5.4 requirements.
• Operates on 3-step, 5-step and 6.6A series circuits.
• Eliminates re-lamping expenses and reduces on-going maintenance costs.
• Improved safety low, regulated DC voltage inside sign.
• Sign lumen maintenance of 70% (L70) minimum for greater than 5 years (assuming sign operates an average of 12 hours per day)
• Type of Sign Illumination : Trans illuminated signage with retro reflective sheets / regular sheets.
• Lamp Type : LED.
• Sign Power Input : Style-3 signs designed for operation from an airport series lighting circuit with a current range of 2.8 to 6.6 amperes or a current range of 8.5 to 20 amperes using Isolation Transformer In-between. (As per FAA - AC No: 150/5345-44F - Clause 4.1.4 Sign Power.)
• Wind Load and Frangibility : Legs provided with breakable coupling for frangibility; As per FAA - AC No: 150/5345-44F - Clause 4.8.3.2 Wind Load and Frangibility Test can withstand wind speed of and jet blast of 90 m/s. As per ICAO Annex 14 Ch. 11 Clause: 11.7.6.
• Water Ingress Protection : As per FAA - AC No: 150/5345-44F - Clause - 4.8.4.5 Rain Test.
• Low Temperature Tolerance : As per FAA - AC No: 150/5345-44F - Clause - 5.6.2.3 Low Temperature Test.
• High Temperature Tolerance : As per FAA - AC No: 150/5345-44F - Clause - 5.6.2.4 High Temperature Test.
• Luminance Ratio :
  • Between red and white elements: 1:5 to 1:10 (For Mandatory Signs) (As per ICAO Annex 14 Appendix-4 Clause: 5).
  • Between adjacent grid points: not more than 1.5:1 (for grid spacing 7.5 cm) (As per ICAO Annex 14 Appendix-4 Clause: 8).
  • Between adjacent grid points: not more than 1.25:1 (for grid spacing 15 cm) (As per ICAO Annex 14 Appendix-4 Clause: 8).
  • Maximum and Minimum Luminance over whole sign face: not more than 5:1(As per ICAO Annex 14 Appendix-4 Clause: 8).
• Arithmetic Average Value of Sign Luminance of ( As per ICAO Annex 14- Appendix-4 Clause:4 (a) )
  • Red Background : 30 cd/m2
  • Yellow Background : 150 cd/m2
  • White Background : 300 cd/m2
• Sign Board Frame Work : Signage frame work contains thick anodized 2 mm thick aluminium profile work with stiffening support.
• Sign Board Face : The signage face is made of 4mm thick poly carbonate glass with computerized cutting and pasting of regular vinyl or Retro-reflective vinyl of make 3M or equivalent.
• Emergency Change Over : Signage Board with Built in Change over Circuit for Main and Stand-by C.C.R for automatic change over operation in case of Line / C.C.R Fault. Separate Control Gear to illuminate each of the two faces adhering to ICAO Annex 14.
• Operating Temperature : Temperature: -40F to +131F (-40C to +55C)

3W LED Dome Mini

Item Code :SESF-LED-0330

Features

• Designed and developed as per European Standards EN-60598-1, EN-60598-2-3, EN-60598-2-4 & EN-60968
• Instant start, No flicker, No noise, Low work temperature, Low power consumption.
• Optimal thermal design to provide extended life to LEDs.
• Bug Free Light - UV Free LED Light Eliminating Bug problems Reduces frequent glass cleaning expenses.
• CE Marking Approved as per European Standards - for further details please refer to CE Marking Certificate.
• Short Pay Back Period Saving more than 80% Power than traditional fixtures.

Specifications

• Operating Voltage230VAC +/- 10%
• Operating Frequency50 Hz +/- 4%
• Input Power3Watt +/- 10%
• LED Efficacy90 110 lm/W.
• LED Type64mW 5mm. Power LED - 30 Nos.
• Color Rendering Index>= 75
• Color Temperature6500K +/- 500K & 3000K +/- 500K-
• Voltage Tolerance Range90 VAC to 300 VAC
• Circuit Efficiency>= 85%.
• BodyPoly Carbonate Body with Diamond Design Diffuser
• Dimension ( L x W x H in mm.)140 X 140 X 53
• Recommended Mounting Height10 Ft. 12 Ft.

4W LED Dome Round Recess Mounting Spot / Down-light

Item Code :SESPDL-LED-0403

Features

• Designed and developed as per European Standards EN-60598-1, EN-60598-2-3, EN-60598-2-4 & EN-60968
• Instant start, No flicker, No noise, Low work temperature, Low power consumption.
• Aluminium Die Cast Body Fixture - Eliminates Problem of Rusting.
• Optimal thermal design to provide extended life to LEDs.
• Bug Free Light - UV Free LED Light Eliminating Bug problems Reduces frequent glass cleaning expenses.
• CE Marking Approved as per European Standards - for further details please refer to CE Marking Certificate.
• Short Pay Back Period Saving more than 80% Power than traditional fixtures.

Specifications

• Operating Voltage120VAC 270VAC +/- 10%
• Operating Frequency50/60 Hz +/- 4%
• Input Power4.32Watt +/- 10%
• LED Efficacy120 140 lm/W.
• LED Type1.22W High Power LED - 3 Nos.
• Color Rendering Index>= 70 / >= 80
• Color Temperature5000K 7000K / 3000K 5000K
• Voltage Tolerance Range90 VAC to 300 VAC
• Circuit Efficiency>= 85%.
• BodyAluminium Profile Fixture
• Dimension ( L x W x H in mm.)85 x 85 x 45 : Cut-out : 70 x 70 mm
• Recommended Mounting Height85 x 85 x 45 : Cut-out : 70 x 70 mm

38W LED Flame Proof Fixture

Item Code :SEFLM-LED-3830

Features

• Designed and developed as per European Standards EN-60598-1, EN-60598-2-3, EN-60598-2-4 & EN-60968
• Instant start, No flicker, No noise, Low work temperature, Low power consumption.
• Aluminium Die Cast Body Fixture - Eliminates Problem of Rusting.
• Optimal thermal design to provide extended life to LEDs.
• Bug Free Light - UV Free LED Light Eliminating Bug problems Reduces frequent glass cleaning expenses.
• Short Pay Back Period Saving more than 80% Power than traditional fixtures.

Specifications

• Operating Voltage110VAC 270VAC +/- 10%
• Operating Frequency50/60 Hz +/- 4%
• Input Power38Watt +/- 10%
• Power Factor>= 0.90 PF
• Total Harmonic Distortion= 70 / >= 80
• Color Temperature5000K 7000K / 3000K 5000K
• Voltage Tolerance Range90 VAC to 300 VAC
• Circuit Efficiency>= 85%.
• BodyAluminium Die Cast Body Fixture
• Dimension ( L x W x H in mm.)265 X 265 X 370
• Recommended Mounting Height20 Ft. 25 Ft.

80W LED Dome High Bay

Item Code :SEHBD-LED-8060

Features

• Designed and developed as per European Standards EN-60598-1, EN-60598-2-3, EN-60598-2-4 & EN-60968
• Instant start, No flicker, No noise, Low work temperature, Low power consumption.
• Aluminium Die Cast Body Fixture - Eliminates Problem of Rusting.
• Optimal thermal design to provide extended life to LEDs.
• Bug Free Light - UV Free LED Light Eliminating Bug problems Reduces frequent glass cleaning expenses.
• CE Marking Approved as per European Standards - for further details please refer to CE Marking Certificate.
• Short Pay Back Period Saving more than 80% Power than traditional fixtures.

Specifications

• Operating Voltage110VAC 270VAC +/- 10%
• Operating Frequency50/60 Hz +/- 4%
• Input Power80Watt +/- 10%
• Power Factor>= 0.95 PF
• Total Harmonic Distortion= 70 / >= 80
• Color Temperature5000K 7000K / 3000K 5000K
• Voltage Tolerance Range90 VAC to 300 VAC
• Circuit Efficiency>= 85%.
• BodyAluminium Profile Fixture
• Dimension ( L x W x H in mm.)430 X 430 X 220
• Recommended Mounting Height25 Ft. 28 Ft.

36 Watt LED Airport Approach/Search Light Fixture

Item Code :SEARP-LED-3627

Features

• Designed and developed as per European Standards EN-60598-1, EN-60598-2-3, EN-60598-2-4 & EN-60968
• Instant start, No flicker, No noise, Low work temperature, Low power consumption, good for eyes.
• Aluminium Die-Cast Body with Yellow Coating - Eliminates Problem of Rusting.
• 360 Degrees Horizontal Rotation Adjustment.
• 45 Degrees Vertical Rotation Adjustment.
• Short Pay Back Period Saving more than 80% Power than traditional fixtures.

Single Face LED Airport Guidance Sign Boards

Item Code :SEAGSLED1F

Features

• Designed and developed as per ICAO Annex 14 and FAA Standards.
• Virtually eliminates runway shutdowns due to LED light source.
• Direct replacement for existing sign.
• Creates a highly uniform distribution of light, eliminating hot spots and shadows.
• Operates on ferroresonant or thyristor CCRs that are designed in compliance with FAA / ICAO-ANNEX-14 requirements.
• Operates on 3-step, 5-step and 6.6A series circuits.
• Eliminates re-lamping expenses and reduces on-going maintenance costs.
• Improved safety low, regulated DC voltage inside sign.
• Sign lumen maintenance of 70% (L70) minimum for greater than 5 years (assuming sign operates an average of 12 hours per day)
• Type of Sign Illumination : Trans illuminated signage with retro reflective sheets / regular sheets.
• Lamp Type : LED.
• Sign Power Input : Style-3 signs designed for operation from an airport series lighting circuit with a current range of 2.8 to 6.6 amperes or a current range of 8.5 to 20 amperes using Isolation Transformer In-between. (As per FAA - AC No: 150/5345-44F - Clause 4.1.4 Sign Power.)
• Wind Load and Frangibility : Legs provided with breakable coupling for frangibility; As per FAA - AC No: 150/5345-44F - Clause 4.8.3.2 Wind Load and Frangibility Test can withstand wind speed of and jet blast of 90 m/s. As per ICAO Annex 14 Ch. 11 Clause: 11.7.6.
• Water Ingress Protection : As per FAA - AC No: 150/5345-44F - Clause - 4.8.4.5 Rain Test.
• Low Temperature Tolerance : As per FAA - AC No: 150/5345-44F - Clause - 5.6.2.3 Low Temperature Test.
• High Temperature Tolerance : As per FAA - AC No: 150/5345-44F - Clause - 5.6.2.4 High Temperature Test.
• Luminance Ratio :
  • Between red and white elements: 1:5 to 1:10 (For Mandatory Signs) (As per ICAO Annex 14 Appendix-4 Clause: 5).
  • Between adjacent grid points: not more than 1.5:1 (for grid spacing 7.5 cm) (As per ICAO Annex 14 Appendix-4 Clause: 8).
  • Between adjacent grid points: not more than 1.25:1 (for grid spacing 15 cm) (As per ICAO Annex 14 Appendix-4 Clause: 8).
  • Maximum and Minimum Luminance over whole sign face: not more than 5:1(As per ICAO Annex 14 Appendix-4 Clause: 8).
• Arithmetic Average Value of Sign Luminance of ( As per ICAO Annex 14- Appendix-4 Clause:4 (a) )
  • Red Background : 30 cd/m2
  • Yellow Background : 150 cd/m2
  • White Background : 300 cd/m2
• Sign Board Frame Work : Signage frame work contains thick anodized 2 mm thick aluminium profile work with stiffening support.
• Sign Board Back Cover : 2 mm thick Aluminium sheet Back cover.
• Sign Board Face : The signage face is made of 4mm thick poly carbonate glass with computerized cutting and pasting of regular vinyl or Retro-reflective vinyl of make 3M or equivalent.
• Emergency Change Over : Signage Board with Built in Change over Circuit for Main and Stand-by C.C.R for automatic change over operation in case of Line / C.C.R Fault.
• Operating Temperature : Temperature: -40F to +131F (-40C to +55C)

We offer 4x24watt t5 indoor fixture. Item code : seind-424t5features designed and developed as per european standards en-60598-1, en-60598-2-3, en-55015 : 2006 & iec 60081 : 2002luminaries design as per is 10322 1 , is 10322 5 sec-2 , is 2418-1, is 2418-2instant start, no flicker, no noise, low work temperature, low power consumption, good for eyes.powder coated c.r.c.a sheet metal body - eliminates problem of rusting.german make imported high grade aluminium reflector as per din en 10204, din 5036, din 67530.electronic control gear for lamp improves light output and reduces power consumption designed as per en-61347-1, -2-3.ce marking approved as per european standards - for further details please refer to ce marking certificate.short pay back period saving more than 50% power than traditional fixtures.

We are offering surface mounting fixture.Item code : sesm-236t8features designed and developed as per european standards en-60598-1, en-60598-2-3, en-55015 : 2006 & iec 60081 : 2002luminaries design as per is 10322 1 , is 10322 5 sec-1 , is 2418-1, is 2418-2instant start, no flicker, no noise, low work temperature, low power consumption, good for eyes.powder coated c.r.c.a sheet metal body - eliminates problem of rusting.electronic control gear for lamp improves light output and reduces power consumption designed as per en-61347-1, -2-3.ce marking approved as per european standards - for further details please refer to ce marking certificate.short pay back period saving more than 50% power than traditional fixtures.

We offer 4x14watt t5 indoor fixture. Item code : seind-414t5features designed and developed as per european standards en-60598-1, en-60598-2-3, en-55015 : 2006 & iec 60081 : 2002luminaries design as per is 10322 1 , is 10322 5 sec-2 , is 2418-1, is 2418-2instant start, no flicker, no noise, low work temperature, low power consumption, good for eyes.powder coated c.r.c.a sheet metal body - eliminates problem of rusting.german make imported high grade aluminium reflector as per din en 10204, din 5036, din 67530.electronic control gear for lamp improves light output and reduces power consumption designed as per en-61347-1, -2-3.ce marking approved as per european standards - for further details please refer to ce marking certificate.short pay back period saving more than 50% power than traditional fixtures.

We are offering led street light fixture.Item code : sestl-led-1510features designed and developed as per european standards en-60598-1, en-60598-2-3, en-60598-2-4 & en-60968instant start, no flicker, no noise, low work temperature, low power consumption.aluminium die cast body fixture - eliminates problem of rusting.optimal thermal design to provide extended life to leds.bug free light - uv free led light eliminating bug problems reduces frequent glass cleaning expenses.ce marking approved as per european standards - for further details please refer to ce marking certificate.excellent compatibility with zigbee, rf, 6lowpan wireless control platforms (on-demand).pwm based dimming facility from external pwm source (on-demand).short pay back period saving more than 80% power than traditional fixtures.wireless control available