Siyamala Tech Kanchipuram, Tamil Nadu

S-Tech custom enclosures and machine enclosures are engineered to our customer's specifications. Our proven design provides friction free doors hydraulically, pneumatically, or manually operated. The doors are built with linear rail design or conventional roller design based on our customer's requirements. After taking into consideration the rigidity of the machine, the hinges, locks and fasteners are specially designed per our customer's specifications. In addition, we have capabilities to provide an economic design, soundproof walls, lighting and provisions for hydraulic hoses and electrical duct work. FEATURES: * Friction free doors for hydraulic, pneumatic or manual closure  * Easy access to the machine for set-ups and adjustments  * Reduces slick floors and keeps them clean and dry  * Easily remove panels and hinged doors  * Reduce coolant consumption  * Doors available with linear rail or conventional roller design  * Soundproof walls for quieter factory environments  * Continuous area lighting for normal operations and maintenance  * Provisions for hydraulic hoses and electrical ductwork  * Prevent chips from spilling out on floor  * Improve in-plant air quality by containing mist and dust    S-Tech free standing noiseless custom enclosures and machine enclosures are guaranteed to reduce the excess noise that can result in employee hearing loss. OTHER BENEFITS: * Custom Enclosures | Machine Enclosures : Benefits  * Reduction in employee stress  * Minimize accidents and improve safety in the work place  * Reduction in employee fatigue  * Improved communications  * Improvement in employee morale  * Provides a cleaner work environment  * Ergonomic design for employee comfort and safety

We offer three types of wipers, 530mm long; other lengths according to individual requirements (max 3m). The preload of the wipers is 1mm. All three types can be supplied with a stainless steel pre-wiper The dimensions stated apply for mounted state. Futures: * Resistant to oils, coolants and hot shavings * Resistant to wear caused by friction produced during scraping * Wiper profile flexible over time. * These consist of a Stainless steel housing to protect from shavings, and an inner profile of Polyurethane. * For work environments with a heavy concentration of sharp shavings * Built to drawings in any shape or size * Solve the problem of small quantities since no expensive molds are used * Polyurethane profile resists abrasion and is easily replaced * We must have a drawing with measurements showing the profile of the guides on which they are to be mounted * Pre-loading is determined by our engineering department based on the shape of the wiper * The wiper measurements refer to free position without pre-load and it is Always necessary to indicate the distance measurement between fastening bore and guide plane to weap. * For fastening, we recommend counter sunk hex screws * Prompt delivery in standard linear strips

It consists of a outer sleeve being chromium plated.stainless steel and plastics pieces and engineering plastic reinforced nylon fibre. The stainless steel bushing is polished. It has some engineering plasis items. It is featurized by rational construction, high strength non-deformation and has nice-looking appearance. Easy installation. It is suitable for various types of electrical of the machine loots, protection for hydraulic pneumatic pipelines and decoration of main machineries and provide the operating personnel with sate working conditions and better the competitive­ness of machine tools and machineries in the internationals market. 

S-TECH offers aluminium alloy type is the only solution to the larger size chains. The supporting boards can be made according to the requirements of the users. Thanks to the strong construction, the width of the supporting board can be 1200mm. S-TECH offers plastic spacing straps can moved and adjusted in position freely. See figure for details. If cables in many different specifications, you may select this economic device. S-TECH offers foam supporting board has many advantages such as cables be protected in a most appropriate way and suitable for the condition of high travel speed. Many famous car makers have chosen this type of device. All cables are distributed in the center position of the fibres.   STL type aluminium alloy protecting board is of completely enclosed type. S-TECH type drag chains are newly developed "Sliver Star Protecting Board" .which are made by using aluminium alloy. Various types of it are available for selection. The order number are 10B/20B/30B rather than 10A/20A/30A.   STL type steel chains with stainless steel straps Elastic steel straps can be installed internally or externally with the aim to protect the cables and keep clean inside. It is very safe and reliable.   Features of the Sliver Star Supporting Board: * Nice-looking appearance * The shield structure device has passed more than 15 years experience successfully. * It is very stable and very solid protection tor cables. The width can be 1000mm. * The drag chains can be opened up at any positions. * The "Sliver Star Protecting Board" can be installed according to the user's request. STL series drag chains are mainly consisting of chain plale (top quality stainless steel with chromium plated), supporting board (extruded aluminium alloy) and pinshaft (alloy), etc. There is no relative motions between the cables/rubber hoses and the drag chains, giving no deforming or twists. The chromium plated chain board has very nice-looking appearance and has very rational construction and flexible and high strength. It is reliable and easy to operate, install, dismantal or assemble. It is worthwhile mentioning that the anti-wearing performance has been improved greatly due to wear resistant material and alloy pinshaft are used. The product is flexible to bending and has low resistance, giving low noises. It can be used for a very long period of time without any deformation or hanging dowm.