Our Products
1) Remove the waste in the hole of the product automatically, such as envelope with window, food packing box,
2) Blow away the scraps on both sides of the product,
3) Load and feed material automatic by photoelectric
4) Suitable for printed or blank roller paper (any weight paper, single or double PE coated)
5) Die cutting nearly no waste, saving material.
6) Adopt flat die cutting mould and knife plate is very cheap.
Our hammer mill is the special milling equipment for materials of < 50 mm (diameter), < 300 mm (length), such as tree trimmings, wood pieces, crop stalks, rice husk, cotton stalk, cottonseed skins and so on.
This hammer mill contains some rotors which are mounted by many hammers. The hammers swing following with the rotor at a high speed. And then the materials fed into a feed hopper are shared by the hammers. At last the materials are expelled out and sieved by the exhaust fan and screen.
After milled, the output size can reach diameter 3-5mm, which is suitable for further palletizing or Briquetting.
Figure 1 is the schematic drawing of CC serial ultrasonic lace sewing machine, which consists of:
(1) ultrasonic generator ;
2) /2 Ultrasonic energy converter ,
(3) /2 (half-wave)variation lever;
(4) /2 ultrasonic(half-wave) tool head ;
(5) pattern wheel
(6) motor, driving belt
(7) speed governor (1), motor(1);
(8) speed governor(2), motor(2);
(9)connection screws and some driving parts.
The ultrasonic generator can apply its energy upon the energy converter to create longitudinal mechanical Vibration, which can then be amplified by the tool head and the variation lever , and form even and strong ultrasonic wave on the plane of the tool head (that is welding head).
The rotation of the tool head (welding head ) and the pattern mould are driven by two sets of speed adjustable motor .when the pattern mould is pressed down , it contacts the working surface of the tool head (welding head) and makes processes such as cutting, punching, sewing and melting on the fabric between the pattern mould and the working surface of the tool head (be care of pure cotton or slick fabric which could not be melted due to that they have no property what thermoplastic material has ).
The fabric is then brought away from the working table by the press wheel so that continuous processing can be carried out.
Automatic bag collecting machine can be matched
Product Description:
1) Meter counter equipped with pre-alarming bell.
2) 1500-3500p/h, stepless governor.
3) Imported PVC Transmission belt, antomatic positioning
4) Printing roller can be automatically tracing and separating
5) Oil leaking device can be replaced freely, oil-ink roller and offset can be separated and harmonized.
6) Transferring oil-ink by roller moir, enhancing polished light for printing, saving oil-ink.
7) Rear transmission can be delayed with the function of airing
This machine is used for producing the non-woven fabrics film automatically. Spinning die-head adopts design optimization of flow models of coat-hanger type, equality distribution of melt, balance pressure, Non-broken or combine fibre, no holes, no blind angle, and fastly Color transition.Rolling mill adopts DC motor universal joint transfer, roller adopts technology of Ultra Laser Drilling to ensure the same of the temperature, no Hair-in-filling.The equipment adopts cutting on line, automatic low winding technology, in order to Serve Resource, and improve the production efficiency.
This Produce line is filament polypropylene fiber spunbonded nonwoven fabrics equipment. Its raw material is polypropylene (PP), take the principle of spinning man-made fibers, during polymer filature, continuous filament is extended into fiber net, which is finished by mechanical hot pressing, The machine assembly we adopt is now advanced veneer integer slot air flow draw technology, the whole process from material feeding to cloth output is automatic control, short production flow, high working efficiency.
The nonwoven fabrics we produce has high strength, good softness, innocuity, bacterium-proof, corrosion resistance, high-level draw strength and elongation rate, They are widely used for dress, decoration materials, medical sanitation materials, daily life products and in the industrials, agriculture fields. In additional, this production line can produce nonwoven fabrics of different color, different grams, different lines according to users requirements.
Lines on nonwoven fabrics : dots, cross line, straight lines, weight:10-200g/m2
Raw material : Polypropylene chips(melt index:20-40g/10min, melt point:166 degree centigrade,
ash content: < 0.15-0.25%)
Feeding(suction, dosing and mixing) -->Melt and extruding(with recycle extruder)-->Filtering -->
Metering --> Spinning --> Quenching --> Air drawing --> Forming --> Calendering --> Winding --> Slitting
--> Product
Our well equipped manufacturing unit with all modern facilities enables us to offer Fully Automatic Paper Plate Lamination Machinery, which meets the requirements of our customers. Our fully automatic lamination machine is simple in operation and gives†500 KGS†output per shift.
Characteristics:
1) Easily removable gum tray
2) Auto stoppage of role of required length
3) Silver adjustment
4) Gum thickness adjustment
5) Machine controlled by gear box
6) Full automatic
7) Easy operating by operator (one operator is enough)
8) Easy maintenance with minimum cost
9) Cheap operating cost and low investment
1) 50% booking amount.
2) Delivery time 20 days
3) 50% Balance Should be paid before dispatch.