Mumbai, Maharashtra, India
Verified
Add Review
Our Products
Our clients can avail from us a comprehensive range ofStainlessSteelPlatesthat are manufactured in line with the prevailing industry standards. These plates can be availed in different grades like austenitic, duplex, martensitic and ferritic. Furthermore, the stainless steel plates offered by us can be provided in 3 mm to 100 mm thickness and 1000 mm to 3200 mm width. The length of these plates can be custom-made in 2438 mm/3048 mm/6096 mm and 13500 mm.
We hold stock of Super Duplex stainless steel plate specifications UNS S32750 (1.4410) and UNS S32760 (1.4501). In order to get more specific information on these steel grades click the following links:
A Super Duplex stainless steel is a type of Duplex stainless steel with enhanced corrosion resistance which is categorised by its PREN being greater than 40. A standard Duplex like the S31803 grade stocked by us has a PREN of around 35. The Pitting Resistance Equivalent Number (PREN) is widely used as a means of comparing the relative corrosion resistance of different steel grades. The PREN is obtained by applying a mathematical formula to the chemical composition of a steel so that PREN = %Cr (3.3 x %Mo) (16 x %N).
As a part of the Duplex family of stainless steels Super Duplex stainless has a microstructure which is split roughly 50:50 between austenite and ferrite. It differs from Duplex in its chemical composition (with increased amounts of Molybdenum, Nickel, and Chromium) and its mechanical properties (higher proof stress and tensile strength). This highly alloyed product is especially designed for marine, chemical, and oil engineering applications requiring both high mechanical strength and resistance to corrosion in extremely aggressive environments (chloride-containing acids etc.).
Super Duplex stainless steel, relative to other stainless steel products, gives
It is used extensively for offshore oil and gas applications and can be found in flow lines, risers, process vessels, separators, coolers, manifolds, and process piping. Onshore it can be found in heat exchangers, boilers, and pressure vessels in petrochemical and chemical processing plant.
Our clients have the leverage to avail from us an extensive range ofNickelAlloySheets. These sheets are manufactured with the use of quality tested material available in various grades. We make sure to procure these sheets from authorized and reputed manufacturers. Furthermore, these sheets can be custom-made on the basis of their thicknesses, dimensions and sizes as follows:
Technical Specifications:
| Nickel Alloy in Grade | Cupro Nickel (90/10, 70/30, 66/30/2/2), Hastelloy (C-4, C-22, C276, B-2), Nickel (200 / 201 / 205), Monel (400 & K500), Inconel (600, 601, 625 & 825), Incoloy (800, 800H), Alloy 20, Duplex Steel, SS 904L, Titanium Etc. |
| In Form of | Round, Coil, Shaft, U Shape Etc. |
| In Length of | Standard length & In Cut length also. |
| Test Certificate | Manufacturer Test Certificate / Laboratory Test Certificate from Govt. Approved Lab. & Under Third Party Inspection with Excise Gate Pass to avail Modvat benefit. |
| Other Services | Draw & Expansion as per required Size & Length, Heat Treatment, Bending, Annealing & Pickled, Machining Etc. |
| Specialize | Cupro Nickel Tube |
| Owing to our experience, we have been successful in catering to the requirements of our esteem clients by offering quality Stainless Steel Coils. The offered range of stainless steel coils is procured from authentic vendors, who ensure to develop it in complete adherence with the international quality standards and guidelines. Known for their high tensile strength and rust proof nature, these products are applicable in different fronts. Along with this, the offered range also includes other products as enlisted below: We are one of the renowned names in the industry that offers an unmatched range ofStainlessSteelCoils.These are manufactured using premium grades of steel and in varied specifications. We comply with the prevailing industry standards and offer our clients coils that are dimensionally accurate along with high tensile strength. Our range is also made available in customized specifications as per the clients |
We can produce 1.7734 EN 15CDV6 stainless steel forged plates 1.7734 EN 15CDV6 forging, sheet, coil, and profiledstrip, Deformed steel, flat steel, mould, steel wire, have all specifications. With production experience, strict control 1.7734 EN 15CDV6 chemical composition and 1.7734 EN 15CDV6 mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.
We offer wide range of cost effectiveS.S Seamless Pipes. Our product undergoes various quality test to ensure its durability, fine finishing, corrosion resistance and dimensional accuracy. Owing to large network of qualified professional, the product is delivered flawlessly once the order is placed. These pipes come in different size, shape and thickness according to the needs of our customers.
Features:
Specification:
Grades:
Size Range:
We offer high qualityCarbon Steel Seamless Pipesthat are commonly used in oil and gas drilling. These pipes are available in various shape, thickness and sizes as customized by our customer. These are manufactured using finest quality raw material to ensure long lasting properties. Our product undergoes various international quality tests to ensure flawless delivery of product once ordered by our client.
Features:
Specifications:
Size Range:
Grade:
We offer a wide range of internationalStandard Stainless Steel Welded Pipes. These pipes are highly demanded in various industries. These are manufactured using finest quality raw material and advanced and fully automated process to ensure fine finishing, corrosion resistance and dimensional accuracy. We work with trusted suppliers who are periodically audited so as to ensure materials adherence to defined industry standards.
Features:
Specifications:
We offer our clients with a wide range of Pressure Vessels that are available in various size and capacities. These pressure vessels are manufactured with the use of quality approved steel and advanced technologies at our vendors production unit. Our range is appreciated for its capacity to withstand high pressure & temperature and excellent performance efficiency under stressful conditions.
We bring forth for our clients a comprehensive range ofPressureVesselsthat are manufactured using premium grade steel. These pressure vessels are sourced from registered manufacturers, who make sure to manufacture the entire range as per the clients' specifications. Furthermore, our pressure vessels are known for withstanding extreme temperature conditions in various industrial applications.
Technical Specification:
| Type | Thickness (mm) | P355 | P460 |
| Tensile Strength (MPa) | ≤ 16mm | 355 | 460 |
| 16 – ≤ 40 | 345 | 445 | |
| 40 – ≤ 60 | 335 | 430 | |
| 60 – ≤ 100 | 315 | 400 | |
| 100 – ≤ 150 | 305 | – | |
| 150 – ≤ 250 | 295 | – | |
| Yield Strength (MPa) | ≤ 16mm | 490 – 630 | 570 – 720 |
| 16 – ≤ 40 | 490 – 630 | 570 – 720 | |
| 40 – ≤ 0 | 490 – 630 | 570 – 720 | |
| 60 – ≤ 100 | 470 – 610 | 540 – 710 | |
| 100 – ≤ 150 | 460 – 600 | – | |
| 150 – ≤ 250 | 450 – 590 | – | |
| Elongation after fracture (% min) | ≤ 60 | 22 | 17 |
| 60 – ≤ 250 | 21 |
Alloy 20is a nickel-iron-chromium alloy with some amounts of copper and molybdenum. The nickel in this alloy makes it resistant to chloride-ion stress-corrosion cracking. On the other hand, copper and molybdenum make it resistant to reducing environments and also provide good resistance to pitting and crevice corrosion. The chromium makes it suitable for work with chemicals like nitric acid, by adding resistance to oxidizing environments. The molybdenum, is also essential for this alloy as it helps to reduce the effect of carbide precipitation during welding and thereby increasing alloy's resistance to intergranular corrosion.
INCO alloy 20 is extremely resistant to corrosion in sulfuric acid environments and hence finds utility with this acid as well as in production of gasoline, solvents, explosives, inorganic and organic chemicals etc. In case of other application, INCO alloy 020 is easily prepared to produce mixing tanks, heat exchangers, process piping, pickling equipment, pumps, valves, fasteners and fittings
We offer wide range of alloy 20 like alloy 20 wire , alloy 20 Round bar, alloy 20 Forged bar , alloy 20 hex bar , alloy 20 Flat bar , alloy 20 Circles , alloy 20 Ring , alloy 20 Tube , alloy 20 seamless Pipe , alloy 20 Welded / ERW Pipe , alloy 20 Sheet , alloy 20 Plate , alloy 20 Coil , alloy 20 Flanges , alloy 20 fasteners , alloy 20 Socket weld Fittings , alloy 20 ferrule fittings , alloy 20 Buttweld fittings Like cap , elbow , tee.
hemical Analysis of Alloy 20
|
C |
Ni |
Mo |
Co |
Ir |
M |
Cr |
Si |
Su |
Ti |
Al |
Pho |
|
.19.00-21.00 |
32.00-38.00 |
2.00-3.00 |
3.00-4.00 |
Bal. |
2.00max |
0.07max |
1.00max |
0.035max |
|
|
0.045max |
ncoloy 800H , Ferrochronin 800, Nickelvac 800, Nicrofer 3220
Incoloy 800 is a combination of nickel and chromium alloy that has excellent tensile strength and resistance to oxidation as well as carburzation properties. This alloy is extremely functional as it maintains a stable structure, even when exposed to high temperature. The Inconel is extremely resistant to corrosion, even in acidic environment.
This inconel 800, alloy 800 and incoloy 800 can be availed in many forms like wire , Round bar, Forged bar , hex bar , Flat bar , Circles , Ring , Tube , seamless Pipe , Welded / ERW Pipe , Sheet , Plate , Coil , Flanges , fasteners , Socket weld Fittings , ferrule fittings , Buttweld fittings Like cap , elbow , tee.
Alloy 800 is a widely used material of construction for equipment that must resist corrosion, have high strength or resist oxidation and other harmful effects of high-temperature exposure.
Inconel Alloy 800 /UNS N08800 is used for process piping, heat exchangers, heating-element sheathing, carburizing equipment, and nuclear steam-generator tubing. UNS N08800 is available in various forms like Inconel 800 wire , Inconel 800 Round bar, Inconel 800 Forged bar , Inconel 800 hex bar , Inconel 800 Flat bar , Inconel 800 Circles , Inconel 800 Ring , Inconel 800 Tube , Inconel 800 seamless Pipe , Inconel 800 Welded / ERW Pipe , Inconel 800 Sheet , Inconel 800 Plate , Inconel 800 Coil , Inconel 800 Flanges , Inconel 800 fasteners , Inconel 800 Socket weld Fittings , Inconel 800 ferrule fittings , Inconel 800 Buttweld fittings Like cap , elbow , tee , Reducer.ncoloy 800H , Ferrochronin 800, Nickelvac 800, Nicrofer 3220
Incoloy 800 is a combination of nickel and chromium alloy that has excellent tensile strength and resistance to oxidation as well as carburzation properties. This alloy is extremely functional as it maintains a stable structure, even when exposed to high temperature. The Inconel is extremely resistant to corrosion, even in acidic environment.
This inconel 800, alloy 800 and incoloy 800 can be availed in many forms like wire , Round bar, Forged bar , hex bar , Flat bar , Circles , Ring , Tube , seamless Pipe , Welded / ERW Pipe , Sheet , Plate , Coil , Flanges , fasteners , Socket weld Fittings , ferrule fittings , Buttweld fittings Like cap , elbow , tee.
Alloy 800 is a widely used material of construction for equipment that must resist corrosion, have high strength or resist oxidation and other harmful effects of high-temperature exposure.
Inconel Alloy 800 /UNS N08800 is used for process piping, heat exchangers, heating-element sheathing, carburizing equipment, and nuclear steam-generator tubing. UNS N08800 is available in various forms like Inconel 800 wire , Inconel 800 Round bar, Inconel 800 Forged bar , Inconel 800 hex bar , Inconel 800 Flat bar , Inconel 800 Circles , Inconel 800 Ring , Inconel 800 Tube , Inconel 800 seamless Pipe , Inconel 800 Welded / ERW Pipe , Inconel 800 Sheet , Inconel 800 Plate , Inconel 800 Coil , Inconel 800 Flanges , Inconel 800 fasteners , Inconel 800 Socket weld Fittings , Inconel 800 ferrule fittings , Inconel 800 Buttweld fittings Like cap , elbow , tee , Reducer.
hemical Analysis of ALLOY 800 UNS (N08800)
Common Names: Incoloy 800H , Ferrochronin 800, Nickelvac 800, Nicrofer 3220
|
C |
MN |
P |
S |
Si |
Cr |
Ni |
Mo |
Cu |
Co |
Cb+Ta |
Ti |
Al |
Fe |
Al + Ti |
Grain |
|
.10 max |
|
|
|
|
19.0 -23.0 |
30.0 -35.0 |
|
|
|
|
0.15 -0.60 |
0.15 -0.60 |
39.5 min |
0.30 1.20 |
Specifications |
We bring forth for our clients a comprehensive range ofPressureVesselsthat are manufactured using premium grade steel. These pressure vessels are sourced from registered manufacturers, who make sure to manufacture the entire range as per the clients' specifications. Furthermore, our pressure vessels are known for withstanding extreme temperature conditions in various industrial applications.
Technical Specification:
| Type | Thickness (mm) | P355 | P460 |
| Tensile Strength (MPa) | ≤ 16mm | 355 | 460 |
| 16 – ≤ 40 | 345 | 445 | |
| 40 – ≤ 60 | 335 | 430 | |
| 60 – ≤ 100 | 315 | 400 | |
| 100 – ≤ 150 | 305 | – | |
| 150 – ≤ 250 | 295 | – | |
| Yield Strength (MPa) | ≤ 16mm | 490 – 630 | 570 – 720 |
| 16 – ≤ 40 | 490 – 630 | 570 – 720 | |
| 40 – ≤ 0 | 490 – 630 | 570 – 720 | |
| 60 – ≤ 100 | 470 – 610 | 540 – 710 | |
| 100 – ≤ 150 | 460 – 600 | – | |
| 150 – ≤ 250 | 450 – 590 | – | |
| Elongation after fracture (% min) | ≤ 60 | 22 | 17 |
| 60 – ≤ 250 | 21 |
Available from stock all steel plate can be cut to size and shape according to your fabrication and design requirements and all work is governed by our independently accredited and regularly audited quality systems to ISO 9001.
Our plates are sourced from the highest quality steel manufacturers in the world and, like all our suppliers, these manufacturers have been vetted and assessed by our procurement team. This not only means that the quality of our stock is assured but also that our extensive supply partnerships offer the opportunity for us to supply non-stock items or non-standard sizes directly from the steel mill to our customers. Using this form of supply it is often possible to deliver much faster than standard mill lead times.
All of our plates and plate products can be delivered to customers anywhere in the world using the services of our own in-house logistics staff.
Both SA387 and A387 are described as a "Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum". The specification covers alloy steel plates intended primarily for welded boilers and pressure vessels designed for elevated temperature use.
Plates are available under these specifications in several grades each having different nominal Chromium (Cr) and Molybdenum (Mo) contents as follows:
|
Grade |
Nominal Cr Content (%) |
Nominal Mo Content (%) |
|
2 |
0.50 |
0.50 |
|
12 |
1.00 |
0.50 |
|
11 |
1.25 |
0.50 |
|
22, 22L |
2.25 |
1.00 |
|
21, 21L |
3.00 |
1.00 |
|
5 |
5.00 |
0.50 |
|
9, 91 |
9.00 |
1.00 |
