Our Products
Specifications
Dia of Screen Deck in mm | 1200 |
---|---|
Distance from Centre to Centre Of discharge Spout In mm | 745 |
Feed Inlet Dia in mm | 210 |
Dia of Discharge spout in mm | 210 |
Dia of Bottom Base In mm | 920 |
Height of Bottom base in mm | 365 |
Discharge Height Of bottom Deck in mm | 540 |
Height of Top Deck In mm | 210 |
Total Height of 5 Deck machine in mm | 1265 |
Total Height of 7 Deck machine in mm | 1483 |
Motor (H.P) | 1.5 |
capacity in Kgs/hr Of made Tea Kgs / Hr | 500 |
Grading Specifications
Grades | Wire Mesh Size (Stainless Steel) | Thickness of Wire SWG |
---|---|---|
BPS | Through 6,above 8 | Mesh 6 X SWG 20 Mesh 8 X SWG 22 |
BOPL | Through 8,above 10 Or Through 10,above 12 | Mesh 10 X SWG 24 Or Mesh 10 X SWG 22 to 23 |
BOP | Through 10,above 12 Or Through 12,above 14 | Mesh 10 X SWG 22 Or Mesh 12 X SWG 23 to 25 |
BOPsm | Through 10,above 12 Or Through 12,above 14 | Mesh 12 X SWG 24 Or Mesh 14 X SWG 26 |
BP | Through 12,above 18 Or Through 14,above 18 | Mesh 18 X SWG 26 Or Mesh 14 X SWG 24 Mesh 18 X SWG 26 |
BPsm | Through 18,above 20 | Mesh 18 X SWG 27 to 28 |
OF | Through 18,above 24 Or Through 20,above 24 | Mesh 24 X SWG 28 Or Mesh 20 X SWG 28 to 30 |
PF | Through 18,above 24 Or Through 20,above 24 | Mesh 24 X SWG 28 Or Mesh 20 X SWG 28 to 30 |
PD | Through 24,above 30 | Mesh 30 X SWG 28 to 35 |
D | Through 30,above 40 | Mesh 40 X SWG 35 |
CD | Through 40,above 50 | Mesh 50 x SWG 37 |
Technical Specifications
Model | Motor (HP) | Capacity in Kgs/Hr | Size (LXBXH in mm) |
---|---|---|---|
SMPL - JR | 10.0 | 200-250 | 680X620X720 |
SMPL - MED | 15.0 | 300-375 | 1040X940X1150 |
SMPL - STD | 40.0 | 700-800 | 1130X1390X1280 |
Details
Cylinder | It is completely made of stainless steel designed to withstand maximum pressure plus the wear and tear |
---|---|
Base Plate | Heavy, M.S. fabricated |
Worm, Resistors & Vanes | These are made from superior quality stainless steel material. Resistors are steel casted/forged, free from casting flaws, with shining finish, whereas vanes are fabricated. Components of gun metal can also be provided in lieu of S.S. |
Irish Discharge | Standard machines are fitted with Irish plates. Cone attachments can also be supplied on request |
Geared Barrel Withdrawal | For easy cleaning of the barrel, a gear mechanism operated by a hand wheel in incorporated |
Rotor Shaft | Made of alloy steel precision machined Standard shaft speed is about (35-38) rpm, but this can be varied |
Feed Hooper | Made of Stainless Steel |
Drives | Though an 8" Centre Worm Reducer. Larger reducers can be supplied if required |
Paintings | Attractive two-tone, automotive finish after full anti rust pre-treatment |
Models | 8", 12" 15", 15" and 18" diameter, Models with pedestal mounting can also be supplied |
Power | Standard machines are designed for 15/20 HP. However, machines for higher power can also be supplied |
Mechanical Hydraulic Specifications
Beam | Heavy Duty H Beam |
---|---|
Axe | 305 cm (12") |
Force/Tonnage | 30 Ton. |
Cylinder Stroke | 510 mm (20") |
Operating Position | Vertical |
Motor | 5 Hp Electric Motor |
Hydraulic Specifications
Hydraulic Oil Tank | 35 Ltr. |
---|---|
Hydraulic Oil Filter | Available |
Weight | 250 Kgs (approx) |